Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Material Handling and SDS Submission

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires strict compliance with the identification, handling, and labeling of hazardous materials in accordance with DFARS 252.223-7001 and MIL-STD-129 standards. All hazardous substances must be properly documented with corresponding Safety Data Sheets submitted as part of the delivery and packaging process, ensuring full regulatory alignment and operational safety throughout the supply chain. The scope encompasses end-to-end management of hazardous material protocols, from initial recognition through final shipment, with an emphasis on accuracy in labeling and timely SDS submission to meet Department of Defense requirements. This subcontract, posted on July 20, 2026, with a response deadline of July 27, 2026, falls under NAICS code 562910 for other remediation services and is administered by the Department of Defense under the Construction & Equipment MRO SVC I contract vehicle. The place of performance and specific office details are not provided, but all work must adhere to federal military standards for hazardous material logistics. Interested parties must respond by the deadline through the DIBBS portal to be considered for award.

General Info

Comply with DFARS and MIL-STD-129 for hazardous material handling, labeling, and SDS submission per DoD requirements.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identification, handling, and labeling of hazardous materials with submission of Safety Data Sheets (SDS) per DFARS 252.223-7001 and MIL-STD-129 requirements.

Similar Contracts

Same NAICS industry code

RFP 735-2026-4428 Asbestos Abatement Oversight ServicesMidwestern State University in Texas is seeking qualified providers to offer asbestos abatement oversight services under solicitation number 735-2026-4428, which was posted on July 20, 2026, with responses due by August 13, 2026. The solicitation is directed toward contractors who can provide professional supervision and monitoring during the removal and containment of asbestos-containing materials at university facilities across the state, ensuring compliance with all applicable federal, state, and local environmental and safety regulations. The work will be performed on-site at various locations within Texas where university buildings require remediation, and the selected vendor must demonstrate expertise in asbestos inspection, abatement planning, and real-time oversight to safeguard workers and occupants. The primary point of contact for this solicitation is Joe Murugalski, who can be reached via phone at 940-397-4095 or email at joe.mrugalski@msutexas.edu. This is a state and local education (SLED) procurement with no set-aside designation specified, meaning any eligible contractor may respond regardless of business size or ownership status. Interested parties should review the full requirements through the designated portal at the provided uiLink, where detailed scopes of work, technical specifications, and evaluation criteria will be available. The contractor will be expected to deliver comprehensive documentation, including inspection reports, air monitoring results, and compliance certifications, to ensure all abatement activities meet regulatory standards and university safety protocols.

Midwestern State University

POSTED

about 16 hours ago

DEADLINE

Radioactive Materials Handling & Notification ServicesThe contract pertains to the identification, labeling, and advance notification of items containing radioactive materials that exceed established regulatory thresholds, ensuring compliance with federal safety and handling standards. Services under this subcontract will involve meticulous tracking and documentation of radioactive content within supplies destined for Department of Defense use, with strict protocols for marking containers and providing timely alerts to relevant personnel and facilities prior to delivery. This work supports the Defense Logistics Agency’s responsibility to manage hazardous materials across military supply chains while safeguarding public health and operational integrity. The contract falls under NAICS code 562910, indicating it is classified as other waste management services, and is managed by the Department of Defense through the Defense Logistics Agency. It is structured as a subcontract with no specified set-aside status, and performance is expected to occur within the broader scope of DoD logistics operations, though no specific geographic location is designated. The solicitation was posted on July 20, 2026, and the contract’s formal reference is linked to award SPE7L126D62CC with delivery order SPE7L026F5671, indicating integration into existing DoD procurement systems for hazardous material handling and regulatory compliance.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Radioactive Materials Handling & LabelingThe contract requires the handling and labeling of radioactive materials in strict compliance with MIL-STD-129, including accurate reporting of activity levels and adherence to all Department of Defense and federal transportation regulations governing the movement of radioactive substances. Work must be performed at the specified place of performance in Portsmouth, NH, with all procedures aligned to ensure safety, regulatory compliance, and proper documentation throughout the handling process. The subcontract is focused on specialized logistics support within the defense supply chain and is tied to a specific NAICS code indicating environmental remediation and waste management services. Responses are due by July 31, 2026, and the solicitation is managed by the Maritime Supply Chain ESOC Buys office under the Department of Defense.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Handling and ComplianceThe contract entails the handling, packaging, labeling, and shipping of hazardous materials linked to National Stock Numbers, with strict adherence to all applicable safety and environmental regulations. This subcontract is issued by the Defense Logistics Agency under the Department of Defense and falls under the NAICS code 562910, which pertains to waste treatment and disposal services. The work requires full compliance with federal standards for hazardous materials transportation and disposal, ensuring the secure and lawful management of dangerous goods throughout the supply chain. Performance is expected to meet rigorous government-mandated protocols to safeguard personnel, public health, and the environment during all phases of material handling. The contract was posted on July 20, 2026, and is tied to a specific award referenced under contract SPE7MX21D0016 with delivery order SPE7MX26F8934.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Hazardous Material Packaging and Labeling ServicesThe contract encompasses specialized packaging, labeling, and preparation services for hazardous materials including diesel fuel and sodium hydroxide in full compliance with Department of Defense standards. All operations must adhere to strict regulatory protocols for the safe handling and transport of dangerous goods, ensuring alignment with militarized logistics requirements. Key obligations include accurate UII marking and container labeling as specified by MIL-STD-130 and MIL-STD-129, mandating precise documentation, barcoding, and physical identification of each shipment to support traceability and accountability across the defense supply chain. This subcontract, issued under the Defense Logistics Agency, falls under the NAICS code 562910 for waste management services and is tied to a performance location governed by DOD operational needs. The work supports critical military logistics functions and requires continuous compliance with federal hazardous material transport regulations. The contract does not specify a set-aside classification or a point of contact, but its issuance through the DIBBS system confirms its status within the official defense procurement network, with performance expected to meet the highest standards of safety, precision, and regulatory fidelity.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Demilitarization (DEMIL) Compliance and Certification ServicesThe contract requires full compliance with DEMIL Q and 2xDM standards for the demilitarization of zeolite canisters, ensuring all materials are rendered unusable and non-recoverable according to Department of Defense regulations. This includes the systematic processing, handling, and documentation of each canister to meet stringent security and environmental protocols. The contractor must generate and submit certified Documents of Destruction or Stabilization for every unit, providing auditable proof that the materials have been safely and permanently disposed of in accordance with federal mandates. All activities must be performed under the oversight of the Defense Logistics Agency, with strict adherence to the NAICS code 562910 for hazardous waste remediation and disposal services. The subcontract is part of a broader DOD initiative to maintain accountability and regulatory compliance in the disposal of sensitive materials, and performance is expected to meet exacting standards without deviation. The work is not tied to a specific geographic location, allowing flexibility in execution as long as the required certifications and regulatory benchmarks are consistently fulfilled.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Hazardous/Radioactive Materials Compliance and HandlingThis contract outlines specialized requirements for the handling, labeling, and transportation of hazardous or radioactive materials that may be present within toggle switches or their packaging, ensuring full regulatory compliance throughout the supply chain. The work is governed under the NAICS code 562910, indicating waste treatment and disposal services, and is structured as a subcontract under the Department of Defense’s Maritime Supply Chain initiative. All activities must adhere to applicable federal and international standards for the safe management of dangerous goods, with strict protocols for identification, containment, documentation, and transport coordination to prevent exposure or contamination risks. The solicitation is open for responses until August 4, 2026, with bidding initiated on July 20, 2026, and performance location details remain unspecified, suggesting potential flexibility in logistics execution. The contract is not subject to any announced small business set-aside, and responsibilities include end-to-end compliance with hazardous materials regulations during all phases of product handling, from receipt through final delivery. Contractors must demonstrate proven expertise in managing radiological or hazardous substances within electronic components and possess the certifications, facilities, and trained personnel required to execute these high-sensitivity operations without disruption or safety breaches.

MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Radioactive Materials Handling & Notification (If Applicable)The contract requires vendors to establish and implement comprehensive notification, labeling, and handling procedures for any radioactive materials, such as tritium, that may be present in landing light components. These procedures must strictly adhere to MIL-STD-129 standards and all applicable federal regulations to ensure safe management, clear identification, and proper communication throughout the supply chain. The requirement applies specifically to products delivered under this subcontract, with responsibility falling on the contractor to identify, document, and mark any radioactive elements in accordance with mandated protocols. Performance is tied to Hill Air Force Base, Utah, with a response deadline of July 28, 2026, and the contract is solicited under NAICS code 562910, which pertains to remediation services. The solicitation is issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION and is structured as a subcontract, indicating it may be part of a larger procurement effort. All parties involved must ensure full compliance with regulatory and military standards to avoid noncompliance penalties, and the contractor is expected to provide verifiable documentation of adherence to labeling and handling requirements prior to delivery.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Hazardous Waste Antifreeze Collection & DisposalThe contract entails the collection, packaging, and disposal of lead-contaminated waste antifreeze classified as EPA D008 hazardous waste, requiring strict adherence to DOT and OSHA regulations for safe handling and transportation. All waste must be contained in 55-gallon drums that meet regulatory standards for storage and transit, ensuring environmental compliance and worker safety throughout the process. The work is performed under a subcontract issued by the Defense Logistics Agency on behalf of the Department of Defense, with the NAICS code 562910 indicating specialty waste collection and treatment services. Performance is expected to align with federal hazardous material management protocols, though specific geographic details for the place of performance are not provided. The contract was posted on July 20, 2026, and is linked to the award record SP450025D0015 with delivery order SP450026F6552.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Hazardous/Radioactive Materials Handling and ComplianceThis contract entails the handling, documentation, and regulatory compliance for hazardous or radioactive materials linked to clutch components, where applicable, under a subcontract structure designated as a Total Small Business Set-Aside by the SBA. The solicitation is managed by the Fluid Handling Division of the Department of Defense, with performance required at Tinker Air Force Base, Oklahoma, 73145-8000. The North American Industry Classification System code is 562910, indicating the work aligns with waste collection and treatment services, underscoring the environmental and safety-focused nature of the tasks. The opportunity was posted on July 20, 2026, with responses due by July 31, 2026, and is accessible through the DIBBS platform for qualified small business contractors seeking to engage in defense-related material compliance activities.

FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Handling (if applicable)The contract requires specialized handling and secondary containment procedures for any mercury-containing components that may be present within the seal kit, in full compliance with NAVSEA 5100-003D standards. This provision ensures that all hazardous materials are managed with strict safety protocols to prevent environmental contamination and protect personnel, reflecting the high-risk nature of mercury exposure. The work is classified under NAICS code 562910, indicating it falls under waste treatment and disposal services, and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense, with performance expected to adhere to federal hazardous materials regulations regardless of location. The contract was posted on July 20, 2026, and is linked to the reference number SPE7L326P4971, though no specific place of performance or point of contact is provided. The absence of a set-aside designation suggests the subcontract is open to all eligible contractors without demographic or size restrictions. While the exact scope of work beyond mercury handling is not detailed, the explicit reference to NAVSEA 5100-003D underscores the necessity for certified procedures, documentation, and equipment for containment, cleanup, and disposal of mercury-contaminated materials, making this a high-compliance, low-tolerance requirement for any subcontractor involved.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Radioactive Material Handling and NotificationThe contract requires the detection, labeling, and reporting of radioactive materials in components that exceed established regulatory thresholds, in full compliance with MIL-STD-129 standards. Work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with all activities focused on identifying and documenting radioactive contamination in defense-related components to ensure regulatory and safety compliance. The subcontract is under the purview of the Fluid Handling Division within the Department of Defense and falls under NAICS code 562910, indicating a focus on environmental remediation and waste management services. Responses are due by July 31, 2026, following a posting date of July 20, 2026, with all obligations tied to strict adherence to federal regulations and military standards. The scope demands specialized expertise in radiological detection and proper labeling procedures to meet DoD requirements, and performance must be executed with precision to prevent non-compliance. The contract does not specify set-aside status or point of contact details, but the place of performance and regulatory framework indicate high-stakes operational and safety conditions requiring certified processes and documented accountability for all detected materials.

FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

Quality Assurance and Inspection ServicesThe contract seeks Quality Assurance and Inspection Services for aluminum sheets to ensure full compliance with specified material standards, including accurate alloy and temper identification, verified heat and lot traceability, and correct labeling and marking as required. All inspections must be conducted with precision to confirm that delivered materials meet contractual and technical specifications before acceptance, with documentation supporting each verification step to maintain traceability and accountability throughout the supply chain. This is a Total Small Business Set-Aside under the SBA program, designated under NAICS code 541330 for Architectural and Engineering Activities, and is issued by the Department of Defense through the Construction & Equipment MRO SVC I organization. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with performance expected to be carried out under the terms of a subcontract. Interested small businesses must submit proposals by the deadline to compete for this opportunity, which emphasizes rigorous adherence to quality control protocols and the ability to provide certified documentation of material compliance.

Engineering Services

POSTED

about 21 hours ago

DEADLINE

Logistics and Shipment to DLA DestinationsThe contract involves the transportation of packaged aluminum sheets to two designated Department of Defense destinations: DLA Warner Robins in Georgia and Tinker Air Force Base in Oklahoma. Shipping is conducted under FOB Origin terms, meaning the buyer assumes all responsibility and costs for the goods once they leave the seller’s location. Invoicing must comply with the Wide Area WorkFlow system to ensure proper documentation and payment processing. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the Small Business Administration. The North American Industry Classification System code for this procurement is 484220, which corresponds to truck transportation of freight, excluding special commodities. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, and is issued under the Construction & Equipment MRO Svc I agency program managed by the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Hazard Communication and Labeling ComplianceThis contract requires strict adherence to OSHA-compliant hazard warning labels as mandated by DFARS 252.223-7001 and OSHA 29 CFR 1910.1200, ensuring all hazardous chemicals are properly labeled in accordance with federal workplace safety regulations. The scope centers on hazard communication and labeling compliance for supplies or services under a subcontract, where accurate and standardized labeling is critical to worker safety and regulatory alignment. All labeled materials must reflect current GHS standards for chemical hazard classification, signal words, pictograms, precautionary statements, and supplier information. The contract is designated as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility to small businesses as defined by the NAICS code 541690, which covers other scientific and technical consulting services. It was posted on July 20, 2026, with responses due by July 27, 2026, and falls under the Department of Defense's Construction & Equipment MRO SVC I procurement category. Performance location details are unspecified, but compliance must meet federal requirements regardless of site. Participation requires a thorough understanding of both OSHA and DFARS labeling obligations to ensure full regulatory compliance and avoid contract noncompliance penalties.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

Preservation, Packaging, and Marking ServicesThe contract seeks subcontractor services for the preservation, packaging, and marking of aluminum sheets in accordance with military standards, requiring specific processes including drying, edge protection, fiberboard wrapping, and adherence to MIL-STD-129 labeling with the code 'ZZ'. All work must meet stringent defense requirements to ensure product integrity during storage and transport. The solicitation is restricted to small businesses under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, with the North American Industry Classification System code 493190 indicating warehousing and storage services. The opportunity is issued under the Department of Defense’s Construction & Equipment MRO SVC I program, with responses due by July 27, 2026, and was posted on July 20, 2026. Performance location details are unspecified, and interested parties must access the full solicitation through the DIBBS portal using the provided link.

Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

Aluminum Alclad Metal Sheet SupplyThe contract calls for the supply of 600 aluminum alclad sheets measuring 0.032 inches thick by 48 inches by 144 inches, manufactured from alloy 2024-T3 and fully compliant with SAE AMS4462B and applicable military specifications. These materials are intended for specialized defense applications requiring high strength-to-weight ratios and corrosion resistance, typical of aerospace and defense system manufacturing. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing compliance with FAR 19.5 guidelines. The North American Industry Classification System code 331315 identifies the relevant industry as aluminum rolling, drawing, and extruding, ensuring the offeror possesses appropriate industrial capability. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, providing a one-week window for submission. The contract falls under the Department of Defense, specifically managed by the Construction & Equipment MRO SVC I organization, indicating the end-use is for maintenance, repair, and overhaul of military equipment. While no specific delivery location or point of contact is listed, performance is expected to support U.S. defense infrastructure, with all materials required to meet stringent defense quality standards. Interested parties must access the official solicitation portal via the provided DIBBS link to review full technical requirements and formal submission instructions.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 21 hours ago

DEADLINE

Certificate of Quality and Mill Certification ServicesThe contract requires the generation and submission of a Certificate of Quality alongside comprehensive mill-material traceability documentation for all supplied materials. This includes detailed reporting of heat and lot numbers, specific alloy grade, temper designation, and confirmation of compliance with applicable ASTM and SAE standards. All documentation must be accurate, complete, and verifiable to ensure material integrity and regulatory alignment throughout the supply chain. The service is being procured as a subcontract under the NAICS code 541380, with the Department of Defense through its Construction & Equipment MRO SVC I office acting as the contracting entity. Responses must be submitted by the deadline of July 27, 2026, and the work must adhere strictly to the technical requirements outlined to meet military-grade material assurance protocols.

Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

Marking and Labeling ServicesThe contract requires permanent marking of aluminum plates in strict compliance with MIL-STD-129 and ASTM B666 standards, ensuring traceability and regulatory adherence for defense-related applications. Marking must include critical identifiers such as the National Stock Number, alloy designation, heat or lot number, dimensions, and applicable specifications, using approved methods including stamping, stenciling, or adhesive labels. All markings must be durable, legible, and resistant to environmental degradation to meet military durability requirements. This is a subcontract solicitation issued under NAICS code 323111 for printing and related support activities, managed by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I organization. The solicitation is open for responses from July 20, 2026, with a firm deadline for submissions on July 27, 2026. The place of performance and point of contact details are not specified, but adherence to the technical standards and submission timeline is mandatory for consideration. Interested parties must ensure full compliance with the marking methods and data requirements outlined in the referenced military and material specifications.

Commercial Printing (except Screen and Books)

POSTED

about 21 hours ago

DEADLINE

Packaging and Preservation ServicesThe contract entails the packaging and preservation of aluminum plates in strict accordance with military standards MIL-STD-2073-1E and material specification ASTM B660-23, ensuring compliance with defense-grade requirements for handling and storage. The work includes specific preservation method ZZ, which involves detailed cleaning and thorough drying procedures to prevent corrosion and contamination, followed by proper palletization to ensure secure transport and long-term integrity. All processes must meet the rigorous environmental and quality controls mandated by the Department of Defense to maintain material readiness and operational reliability. This is a subcontract opportunity under the NAICS code 385110, posted by the Department of Defense through its Construction & Equipment MRO SVC I contracting office. Responses are due by July 27, 2026, with the solicitation open for submission starting July 20, 2026. While no specific place of performance or point of contact is listed, the work is expected to align with DLA logistics infrastructure and procurement protocols, and all submissions must be made through the official DIBBS platform using the provided solicitation number SPE8E926Q0602.

POSTED

about 21 hours ago

DEADLINE

Aluminum Metal Plate Supply and ConformanceThe contract calls for the supply of aluminum alloy plates with precise specifications: 0.250 inch thickness and dimensions of 36 by 96 inches, fully compliant with SAE AMS4016N, ASTM B209, and AMS-QQ-A-250/8C standards. Full traceability and certified documentation are required to ensure every batch meets the mandated material and quality benchmarks, with all certifications included to verify conformance. The plates must be produced and delivered under strict adherence to established aerospace and military-grade material protocols, ensuring reliability for critical applications. This is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a solicitation posted on July 20, 2026, and responses due by July 27, 2026. It falls under NAICS code 331315, indicating a focus on aluminum rolling, extruding, and drawing. The place of performance and point of contact details are not specified, but the procurement is managed through the DLA’s DIBBS platform, and suppliers must meet stringent compliance and certification requirements to qualify for award. All deliveries must align with the contractual material standards and documentation expectations without exception.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military Marking and Barcoding ServicesThe contract requires the application of standardized military markings and barcodes in strict compliance with MIL-STD-129 to ensure proper item identification, traceability, and storage labeling for defense-related equipment and supplies. All labeling must adhere to the established military standards to support operational readiness, logistics tracking, and inventory management across the Department of Defense supply chain. The work is to be performed at the Tobyhanna location with a ZIP code of 18466-5050, and the subcontract is classified under NAICS code 561990 for other administrative and support services. Responses must be submitted by July 31, 2026, with the solicitation posted on July 20, 2026, and is open for bidding through the DIBBS platform. No set-aside provisions are specified, and the contracting activity falls under the Construction & Equipment MRO SVC I organization within the Department of Defense.

All Other Support Services

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Labeling and ComplianceThe contract requires the provision of hazard warning labels and Material Safety Data Sheets (MSDS) for rubber strip products, strictly in accordance with 29 CFR 1910.1200, which governs hazard communication standards. Compliance is mandatory unless the rubber strip qualifies for exemption under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), the Federal Food, Drug, and Cosmetic Act (FDCA), the Consumer Product Safety Act (CPSA), the Federal Hazardous Substances Act (FHS), or the Federal Aviation Administration (FAA) regulations. The work is structured as a subcontract under NAICS code 541690, falling under the Department of Defense’s Construction & Equipment MRO SVC I program, with performance obligations centered at Tobyhanna, Pennsylvania, zip code 18466-5050. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and all deliverables must align with U.S. regulatory requirements to ensure the safe handling, storage, and use of the rubber strip material in defense-related applications.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging, preservation, and unit containment services aligned with Defense Logistics Agency specifications, including the application of packaging code U and the use of unit containers in quantities of ten per unit, all palletized in accordance with RP001 standards. Services must ensure full compliance with Department of Defense preservation protocols to maintain equipment integrity during storage and transit. The place of performance is fixed at Tobyhanna, Pennsylvania, with the ZIP code 18466-5050, and the work falls under NAICS code 493190, indicating specialized logistics and packaging support for defense materiel. This is a subcontract issued under the Construction & Equipment MROSvc I procurement vehicle by the Department of Defense. Proposals must be submitted by July 31, 2026, with the solicitation posted on July 20, 2026, and all work must be performed to meet exacting military requirements for unit containment and packaging integrity. No set-aside provisions are specified, and the contract is open to eligible subcontractors capable of fulfilling DLA’s stringent packaging and preservation standards. The official portal for all solicitation details is accessible through the DIBBS platform, where vendors can obtain additional technical and procedural guidance.

Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE