Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials and Radioactive Material Compliance Support

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract supports compliance with hazardous materials regulations by ensuring proper preparation of safety data sheets in accordance with 29 CFR 1910.1200 and accurate labeling of radioactive materials as required by MIL-STD-129 when regulatory thresholds are exceeded. The work focuses on maintaining adherence to federal safety and labeling standards to safeguard personnel, the environment, and operational integrity. The subcontract is designated as a Total Small Business Set-Aside under SBA guidelines, with the North American Industry Classification System code 541620 indicating environmental consulting and related services. Performance of the contract is centered in Tracy, California, with a zip code of 95304-5000, and is issued by DLA Dist San Joaquin under the Department of Defense. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026.

General Info

Small business contract for hazardous materials compliance and labeling in Tracy, California, under DLA.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA DIST SAN JOAQUIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Support hazardous materials compliance including SDS preparation per 29 CFR 1910.1200 and radioactive material labeling per MIL-STD-129 if thresholds are exceeded.

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance & LabelingThe contract requires the preparation and submission of globally harmonized system–compliant hazard warning labels and safety data sheets for hazardous materials, ensuring full alignment with OSHA’s Hazard Communication Standard. All deliverables must meet regulatory requirements to accurately communicate chemical hazards to workers and downstream users, with strict adherence to formatting, content, and language standards mandated by 29 CFR 1910.1200. The work is classified as a subcontract under NAICS code 541620, indicating it involves scientific and technical consulting services related to environmental compliance and safety documentation. Performance is required at Tracy, California, with a zip code of 95304-5000, and the proposal submission deadline is August 20, 2026. The contract was posted on August 9, 2026, under the Department of Defense’s Construction & Equipment MRO SVC I procurement office, indicating its application within military or defense-related operations. While no set-aside designation is specified, the solicitation is accessible via the DIBBS platform, and responders must ensure timely and accurate delivery of all GHS-compliant documentation to satisfy federal safety and labeling obligations.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data ManagementThe contract requires the identification and documentation of hazardous materials contained in delivered items, with a focus on ensuring full compliance with OSHA regulations. This includes the accurate preparation of Safety Data Sheets for each hazardous substance and the application of standardized hazard labeling that meets federal safety standards. The work demands precision in material analysis, thorough recordkeeping, and strict adherence to regulatory requirements to support safe handling, storage, and transportation of hazardous goods within the supply chain. The contract is a subcontract under the NAICS code 541620, issued by the Department of Defense through DLA DIST SAN JOAQUIN, with performance required at a facility in Tracy, California, zip code 95304-5000. It was posted on August 9, 2026, and responses must be submitted by August 20, 2026. There is no set-aside designation, and the opportunity is open to qualified subcontractors capable of delivering compliant hazardous materials documentation and labeling services. The procurement is conducted through the DIBBS platform, and all technical and regulatory obligations must be fulfilled to meet Department of Defense safety and compliance expectations.

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Labeling and Safety DataThe contract requires the provision of hazard labels and Material Safety Data Sheets for all hazardous components in compliance with OSHA 29 CFR 1910.1200, ensuring proper identification and handling of dangerous materials. This subcontract is issued under the NAICS code 541620 and is managed by the Electrical Devices Division within the Department of Defense, with performance required at Tracy, California, zip code 95304-5000. The solicitation was posted on August 9, 2026, and responses must be submitted by August 20, 2026, to meet the deadline. All materials and documentation must adhere strictly to federal safety regulations to support safe operations and regulatory compliance across the supply chain.

ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires identification of hazardous components and application of OSHA-compliant hazard communication labels in accordance with 29 CFR 1910.1200, or alternative regulatory frameworks such as FIFRA or FFDCA when applicable for government approval. This effort is critical to ensuring proper labeling of hazardous materials to meet federal safety and compliance standards, particularly for materials used in defense-related construction and equipment maintenance, repair, and overhaul activities. All labeling must clearly communicate chemical hazards, precautionary measures, and required protective actions as mandated by law. The work is positioned as a subcontract under NAICS code 541620, indicating a focus on environmental consulting and related technical services. The performance location is specified as New Cumberland, Pennsylvania, with a postal code of 17070-5002, and the contracting agency is the Department of Defense under the Construction & Equipment MRO SVC I procurement category. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and all submissions must be made through the DIBBS system using the provided link. Compliance with applicable federal regulations and accurate documentation of labeling procedures are essential to fulfill contract obligations.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

Hazardous and Radioactive Materials ComplianceThe contract requires comprehensive management of hazardous and radioactive materials employed in manufacturing and packaging operations, including precise identification, safe handling procedures, and proper labeling in accordance with established regulatory standards. A critical component involves the preparation and maintenance of Safety Data Sheets to ensure regulatory compliance and worker safety, alongside adherence to MIL-STD-129 for the packaging, marking, and documentation of hazardous shipments. All activities must align with strict Department of Defense protocols to ensure the secure and lawful transportation and use of dangerous substances. The work is to be performed at Robins Air Force Base, Georgia, 31098-1887, under a subcontract solicitation issued by the Department of Defense through the Warner Robins office. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 541620, which categorizes scientific and technical consulting services. Contractors must demonstrate proven expertise in hazardous materials handling and DOD compliance to meet the requirements, with no set-aside provisions specified for small or disadvantaged businesses.

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data SupportThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets for hazardous materials in full compliance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200 standards. This effort is critical to ensure proper identification, handling, and communication of hazards associated with materials used or supplied under the agreement, with strict adherence to federal regulatory requirements for workplace safety and defense contracting. All documentation must be accurate, up to date, and formatted in accordance with the specified guidelines to meet military and occupational safety protocols. This subcontract, issued by the Active Devices Division of the Department of Defense, falls under NAICS code 541620, indicating it involves scientific and technical consulting services related to safety and regulatory compliance. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The performance location and point of contact details are not specified, but the work must be executed to support the defense supply chain’s safety and regulatory obligations. Interested parties must respond through the designated DIBBS system portal before the deadline to be considered for award.

ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive identification and documentation of hazardous materials at the DOD’s New Cumberland facility, with a focus on preparing and maintaining Safety Data Sheets (SDS) that meet OSHA compliance standards for government submission. The work involves ensuring all hazardous substances are accurately characterized, categorized, and documented in accordance with federal regulations, and that SDS documents are consistently updated to reflect changes in material composition, handling procedures, or regulatory requirements. The contractor must demonstrate technical expertise in hazardous material management and SDS preparation to support the Department of Defense’s compliance obligations. This is a total small business set-aside under NAICS code 541620, reserved exclusively for small businesses as defined by the SBA, and is issued as a subcontract under a solicitation posted on August 9, 2026, with responses due by August 20, 2026. Performance is required at the New Cumberland location with ZIP code 17070-5002, and the contracting activity is managed by the Department of Defense through its DDSP New Cumberland Facility. The contractor is expected to operate under strict regulatory guidelines and deliver accurate, timely, and auditable SDS documentation to support federal safety and environmental compliance efforts.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThis contract requires the preparation and submission of Safety Data Sheets for valves that involve hazardous substances, ensuring full compliance with federal regulations governing hazardous materials handling. The work demands accurate documentation and adherence to safety standards to mitigate risks associated with chemical exposure and transportation, with a focus on regulatory precision and timely delivery of SDS documentation. The subcontract is set aside exclusively for Women-Owned Small Businesses under the WOSB program, and the North American Industry Classification System code 541620 indicates it falls under scientific and technical consulting services, specifically environmental consulting and related compliance support. Performance of the contract is centered in Tracy, California, with a zip code of 95304-5000, and bids must be submitted by August 20, 2026. The solicitation is managed by the DLA Dist San Joaquin under the Department of Defense, indicating a direct connection to defense supply chain requirements. Although no point of contact is listed publicly, interested parties can access additional details through the official DIBBS portal. The contract emphasizes regulatory diligence and environmental safety, making technical expertise in hazardous materials compliance and SDS formatting essential for qualified bid applicants.

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract involves the preparation, validation, and ongoing management of Safety Data Sheets (SDS) to ensure full compliance with OSHA and Defense Logistics Agency (DLA) regulations. This work is critical for maintaining hazardous materials safety standards at Tinker Air Force Base, where the performance location is designated. The subcontractor will be responsible for accurately developing SDS documents, verifying their alignment with federal safety requirements, and sustaining updates as chemical inventories or regulatory standards evolve. The effort supports the Department of Defense’s obligation to safeguard personnel, environmental health, and operational continuity through rigorous hazardous materials documentation practices. The solicitation, posted on August 9, 2026, requires responses by August 20, 2026, and falls under NAICS code 541620 for scientific and technical consulting services. While no set-aside type is specified, the contract is structured as a subcontract under the Depot Oklahoma organization of the Department of Defense. Performance will occur exclusively at Tinker AFB with a zip code of 73145-8000, and the technical scope demands precise adherence to federal compliance frameworks. Contractors must demonstrate proven capability in SDS lifecycle management with direct experience in defense or government hazardous materials environments to meet the rigorous expectations of this requirement.

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance and DocumentationThe contract requires comprehensive identification and documentation of hazardous materials in accordance with OSHA’s Hazard Communication Standard and DFARS 252.223-7001, ensuring all regulated substances are properly categorized and disclosed. Contractors must prepare, maintain, and submit accurate Safety Data Sheets for each hazardous material, along with ensuring all containers and storage areas are labeled in full compliance with federal regulations. The work is scoped to support DoD maintenance, repair, and operations activities, with performance centered in San Diego, California, under a Small Business Set-Aside designation as defined by the SBA and FAR 19.5. The NAICS code 541620 indicates this effort falls under environmental consulting services, and submissions must be completed by the response deadline of August 20, 2026, following the solicitation posted on August 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

Hazard Communication & Labeling Compliance

CHERRY POINT PHANTOM RD BLDG

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe contract entails the identification, documentation, and continuous management of hazardous materials used within Department of Defense operations, with a primary focus on ensuring full compliance with OSHA’s Hazard Communication Standard and DFARS regulations. This includes the preparation, maintenance, and timely updating of Safety Data Sheets (SDS) for all applicable substances, requiring rigorous tracking, accurate chemical disclosure, and alignment with federal safety and reporting mandates. Work must be performed in San Diego, California, at the specified ZIP code, and is structured as a subcontract under NAICS code 541620, indicating a focus on scientific and technical consulting services related to environmental and safety compliance. All proposals must be submitted by the deadline of August 20, 2026, following the release of the solicitation on August 9, 2026. While no set-aside designation is specified, the contract is managed by the Defense Logistics Agency under the broader oversight of the Department of Defense, reflecting its importance to military supply chain safety and regulatory adherence. The successful vendor will be responsible for maintaining ongoing SDS accuracy, responding to regulatory changes, and ensuring all hazardous material documentation meets DoD standards for operational continuity and personnel protection. The work will be carried out remotely or on-site as needed, but performance location is fixed in San Diego.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

Supply Chain Compliance & Regulatory ReportingThe contract titled Supply Chain Compliance & Regulatory Reporting is a subcontract issued by the Department of Defense through DLA DIST SAN JOAQUIN, with a place of performance in Tracy, California, zip code 95304-5000. It is aimed at supporting critical regulatory obligations related to the defense supply chain, including the mandatory disclosure of covered defense telecommunications equipment, identification and management of foreign providers, and accurate upkeep of UEI and CAGE codes. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 541611, indicating management, scientific, and technical consulting services. The requirement emphasizes strict adherence to federal compliance standards essential for national security and supply chain integrity, though no set-aside designation or point of contact details are provided. Interested parties must respond via the provided DIBBS link before the deadline.

Administrative Management and General Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

Military-Compliant Packaging & Marking ServicesThe contract requires preservation packaging and marking of piston-valve assemblies in full compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring proper moisture protection and adherence to MIL-STD-129 for labeling requirements. The work must meet rigorous military specifications for long-term storage and transportation readiness, with all packaging processes designed to safeguard the assemblies from environmental degradation and ensure traceability through standardized markings. This subcontract is issued under NAICS code 561910 by DLA Dist San Joaquin under the Department of Defense and is performance-based at Tracy, California, with a zip code of 95304-5000. Proposals must be submitted by August 20, 2026, following the solicitation posted on August 9, 2026, and the work is intended to support defense logistics operations requiring certified military-grade packaging solutions.

Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

Precision Machined Valve Piston ManufacturingThe contract entails the manufacture of a high-integrity piston-valve assembly designed to meet Navy Critical Safety Item standards, demanding strict adherence to military specifications and rigorous quality controls. Production must include full material traceability, lot and serial number control, and documented compliance throughout all manufacturing stages to ensure safety, reliability, and performance under extreme operational conditions. The work is classified as a subcontract under NAICS code 332999, with performance designated to occur at Tracy, California, 95304-5000, under the oversight of DLA Dist San Joaquin, a Department of Defense entity. All deliverables must align with defense-grade requirements for critical systems, where failure is not an option. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, leaving a limited window for qualified vendors to submit proposals. No set-aside preferences or organizational type restrictions are specified, indicating an open competition among eligible subcontractors capable of meeting the stringent technical and compliance benchmarks. While no point of contact is listed, the official bid portal is accessible via the provided DIBBS link, where complete technical data, drawings, and regulatory requirements must be reviewed prior to submission. Success requires not only precision machining capability but also proven experience in defense-related components with full documentation and audit readiness.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

Military-Compliant Marking and Labeling ServicesThe contract requires the application of continuous, legible, and durable identification markings in strict accordance with MIL-STD-129R standards, ensuring all items are properly labeled with the NSN, alloy composition, temper designation, and lot number. This work falls under a Total Small Business Set-Aside as defined by FAR 19.5 and is classified under NAICS code 561910, indicating it is an administrative and support services subcontract focused on specialized labeling and marking services. The performance location is designated as Tracy, California, with a zip code of 95304-5000, and the contracting entity is DLA Dist San Joaquin under the Department of Defense. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and interested parties must submit through the DIBBS platform using the provided link, ensuring full compliance with military-grade marking specifications and timelines.

Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive packaging, preservation, and palletization services strictly aligned with MIL-STD-2073-1E and ASTM B660-23 standards, including the application of preservation code ZZ to ensure military-grade protection of equipment and materials. All work must meet rigorous defense specifications for environmental resistance, durability, and long-term storage readiness, with strict adherence to prescribed methods for corrosion inhibition, moisture control, and secure containerization. The services are to be performed at the designated place of performance in Tracy, California, with precise compliance expected in every phase of the operation. This is a small business set-aside subcontract under NAICS code 561910, managed by the Department of Defense through DLA Dist San Joaquin, and is exclusively available to small business concerns as defined by the SBA. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with all submissions required through the DIBBS platform. While no specific point of contact is listed, bidders must ensure full alignment with federal procurement regulations and deliverables consistent with defense logistics standards.

Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

Metal Certification and Quality Documentation ServicesThis contract requires the provision of Certificate of Quality Compliance, also known as Mill or Material Certification, for every shipment to ensure full traceability and strict adherence to Department of Defense Logistics Agency and ASTM standards. The focus is on delivering accurate, verifiable documentation that confirms material specifications and regulatory compliance with each delivery. The solicitation, titled Metal Certification and Quality Documentation Services, is designated as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility to small businesses as defined by NAICS code 541380. Performance is required at Tracy, California, with a zip code of 95304-5000, and the response deadline is set for August 20, 2026. The contract is issued under the Department of Defense through DLA Dist San Joaquin, emphasizing the critical nature of documentation integrity in defense supply chain operations.

Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

High Magnesium Aluminum Alloy Plate ManufacturingThe contract calls for the manufacture and supply of high magnesium aluminum alloy plates that must comply with ASTM B928/B928M-15 and applicable military specifications, ensuring precise dimensional accuracy and complete material traceability from production through delivery. The products are intended for defense-related applications requiring stringent quality control and documented provenance, with all materials subject to rigorous testing and certification requirements. The work is designated as a Total Small Business Set-Aside under SBA rules, restricting eligibility solely to small businesses as defined by the Small Business Administration. The solicitation, issued by the DLA Dist San Joaquin under the Department of Defense, has a response deadline of August 20, 2026, and is classified as a subcontract. The North American Industry Classification System code is 331314, indicating this pertains to aluminum rolling, drawing, and extruding. Performance of the contract will occur at Tracy, California, with a zip code of 95304-5000. Interested parties must submit proposals through the DIBBS system at the provided web link prior to the deadline to be considered for award.

Secondary Smelting and Alloying of Aluminum

POSTED

about 3 hours ago

DEADLINE

Domestic and International Freight Logistics

Deep Sea Freight Transportation

POSTED

about 3 hours ago

DEADLINE

Military-Compliant Packaging and Labeling Services

Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

Commercial Fan Supply and Packaging

Motor and Generator Manufacturing

POSTED

about 3 hours ago

DEADLINE

Small Business or Socioeconomic Prime Subcontracting OpportunityA subcontracting opportunity is available for small or socioeconomically certified businesses to support a prime contractor in the defense metal supply chain. The opportunity, posted on August 9, 2026, requires responses by August 20, 2026, and is classified under NAICS code 331492, which pertains to other nonferrous metal casting and related activities. The prime contractor is working under the Department of Defense through DLA DIST SAN JOAQUIN, with work expected to be performed at a location in Tracy, California, zip code 95304-5000. This subcontracting effort is designed to leverage the capabilities of small or certified businesses to ensure the integrity and efficiency of critical defense material sourcing, though no specific set-aside designation is indicated. Interested parties must access the opportunity through the official DIBBS platform using the provided link to obtain full details and submit proposals.

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 3 hours ago

DEADLINE