Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous and Radioactive Materials Compliance

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive management of hazardous and radioactive materials employed in manufacturing and packaging operations, including precise identification, safe handling procedures, and proper labeling in accordance with established regulatory standards. A critical component involves the preparation and maintenance of Safety Data Sheets to ensure regulatory compliance and worker safety, alongside adherence to MIL-STD-129 for the packaging, marking, and documentation of hazardous shipments. All activities must align with strict Department of Defense protocols to ensure the secure and lawful transportation and use of dangerous substances. The work is to be performed at Robins Air Force Base, Georgia, 31098-1887, under a subcontract solicitation issued by the Department of Defense through the Warner Robins office. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 541620, which categorizes scientific and technical consulting services. Contractors must demonstrate proven expertise in hazardous materials handling and DOD compliance to meet the requirements, with no set-aside provisions specified for small or disadvantaged businesses.

General Info

Manage hazardous and radioactive materials at Robins AFB per DOD protocols and MIL-STD-129 with compliant SDS and labeling.

Agency

Department Of Defense → WARNER ROBINSView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → WARNER ROBINS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → WARNER ROBINS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identification, handling, and labeling of hazardous or radioactive materials used in manufacturing or packaging, including SDS preparation and compliance with MIL-STD-129 for hazardous shipments.

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance & LabelingThe contract requires the preparation and submission of globally harmonized system–compliant hazard warning labels and safety data sheets for hazardous materials, ensuring full alignment with OSHA’s Hazard Communication Standard. All deliverables must meet regulatory requirements to accurately communicate chemical hazards to workers and downstream users, with strict adherence to formatting, content, and language standards mandated by 29 CFR 1910.1200. The work is classified as a subcontract under NAICS code 541620, indicating it involves scientific and technical consulting services related to environmental compliance and safety documentation. Performance is required at Tracy, California, with a zip code of 95304-5000, and the proposal submission deadline is August 20, 2026. The contract was posted on August 9, 2026, under the Department of Defense’s Construction & Equipment MRO SVC I procurement office, indicating its application within military or defense-related operations. While no set-aside designation is specified, the solicitation is accessible via the DIBBS platform, and responders must ensure timely and accurate delivery of all GHS-compliant documentation to satisfy federal safety and labeling obligations.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data ManagementThe contract requires the identification and documentation of hazardous materials contained in delivered items, with a focus on ensuring full compliance with OSHA regulations. This includes the accurate preparation of Safety Data Sheets for each hazardous substance and the application of standardized hazard labeling that meets federal safety standards. The work demands precision in material analysis, thorough recordkeeping, and strict adherence to regulatory requirements to support safe handling, storage, and transportation of hazardous goods within the supply chain. The contract is a subcontract under the NAICS code 541620, issued by the Department of Defense through DLA DIST SAN JOAQUIN, with performance required at a facility in Tracy, California, zip code 95304-5000. It was posted on August 9, 2026, and responses must be submitted by August 20, 2026. There is no set-aside designation, and the opportunity is open to qualified subcontractors capable of delivering compliant hazardous materials documentation and labeling services. The procurement is conducted through the DIBBS platform, and all technical and regulatory obligations must be fulfilled to meet Department of Defense safety and compliance expectations.

DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Labeling and Safety DataThe contract requires the provision of hazard labels and Material Safety Data Sheets for all hazardous components in compliance with OSHA 29 CFR 1910.1200, ensuring proper identification and handling of dangerous materials. This subcontract is issued under the NAICS code 541620 and is managed by the Electrical Devices Division within the Department of Defense, with performance required at Tracy, California, zip code 95304-5000. The solicitation was posted on August 9, 2026, and responses must be submitted by August 20, 2026, to meet the deadline. All materials and documentation must adhere strictly to federal safety regulations to support safe operations and regulatory compliance across the supply chain.

ELECTRICAL DEVICES DIV

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires identification of hazardous components and application of OSHA-compliant hazard communication labels in accordance with 29 CFR 1910.1200, or alternative regulatory frameworks such as FIFRA or FFDCA when applicable for government approval. This effort is critical to ensuring proper labeling of hazardous materials to meet federal safety and compliance standards, particularly for materials used in defense-related construction and equipment maintenance, repair, and overhaul activities. All labeling must clearly communicate chemical hazards, precautionary measures, and required protective actions as mandated by law. The work is positioned as a subcontract under NAICS code 541620, indicating a focus on environmental consulting and related technical services. The performance location is specified as New Cumberland, Pennsylvania, with a postal code of 17070-5002, and the contracting agency is the Department of Defense under the Construction & Equipment MRO SVC I procurement category. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and all submissions must be made through the DIBBS system using the provided link. Compliance with applicable federal regulations and accurate documentation of labeling procedures are essential to fulfill contract obligations.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data SupportThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets for hazardous materials in full compliance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200 standards. This effort is critical to ensure proper identification, handling, and communication of hazards associated with materials used or supplied under the agreement, with strict adherence to federal regulatory requirements for workplace safety and defense contracting. All documentation must be accurate, up to date, and formatted in accordance with the specified guidelines to meet military and occupational safety protocols. This subcontract, issued by the Active Devices Division of the Department of Defense, falls under NAICS code 541620, indicating it involves scientific and technical consulting services related to safety and regulatory compliance. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The performance location and point of contact details are not specified, but the work must be executed to support the defense supply chain’s safety and regulatory obligations. Interested parties must respond through the designated DIBBS system portal before the deadline to be considered for award.

ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive identification and documentation of hazardous materials at the DOD’s New Cumberland facility, with a focus on preparing and maintaining Safety Data Sheets (SDS) that meet OSHA compliance standards for government submission. The work involves ensuring all hazardous substances are accurately characterized, categorized, and documented in accordance with federal regulations, and that SDS documents are consistently updated to reflect changes in material composition, handling procedures, or regulatory requirements. The contractor must demonstrate technical expertise in hazardous material management and SDS preparation to support the Department of Defense’s compliance obligations. This is a total small business set-aside under NAICS code 541620, reserved exclusively for small businesses as defined by the SBA, and is issued as a subcontract under a solicitation posted on August 9, 2026, with responses due by August 20, 2026. Performance is required at the New Cumberland location with ZIP code 17070-5002, and the contracting activity is managed by the Department of Defense through its DDSP New Cumberland Facility. The contractor is expected to operate under strict regulatory guidelines and deliver accurate, timely, and auditable SDS documentation to support federal safety and environmental compliance efforts.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThis contract requires the preparation and submission of Safety Data Sheets for valves that involve hazardous substances, ensuring full compliance with federal regulations governing hazardous materials handling. The work demands accurate documentation and adherence to safety standards to mitigate risks associated with chemical exposure and transportation, with a focus on regulatory precision and timely delivery of SDS documentation. The subcontract is set aside exclusively for Women-Owned Small Businesses under the WOSB program, and the North American Industry Classification System code 541620 indicates it falls under scientific and technical consulting services, specifically environmental consulting and related compliance support. Performance of the contract is centered in Tracy, California, with a zip code of 95304-5000, and bids must be submitted by August 20, 2026. The solicitation is managed by the DLA Dist San Joaquin under the Department of Defense, indicating a direct connection to defense supply chain requirements. Although no point of contact is listed publicly, interested parties can access additional details through the official DIBBS portal. The contract emphasizes regulatory diligence and environmental safety, making technical expertise in hazardous materials compliance and SDS formatting essential for qualified bid applicants.

DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires the identification, documentation, and timely submission of Safety Data Sheets for all hazardous materials used in manufacturing or packaging operations, adhering to both OSHA and Defense Logistics Agency standards. The work is focused on ensuring full regulatory compliance through accurate recordkeeping and submission protocols, with an emphasis on maintaining up-to-date SDS documentation for all applicable substances across the supply chain. This effort supports the safe handling, storage, and transportation of hazardous materials within DLA operations at Hill Air Force Base. This is a total small business set-aside solicitation under NAICS code 541620, open exclusively to qualified small businesses, with responses due by August 20, 2026. The contract falls under the Fluid Handling Division of the Department of Defense and is managed as a subcontract opportunity. Performance will be conducted at Hill AFB, Utah, with all SDS submissions required to meet federal safety and environmental guidelines. The procurement emphasizes precision and compliance, with failure to provide complete, accurate, and current SDS documentation potentially impacting contract fulfillment and operational safety.

FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract involves the preparation, validation, and ongoing management of Safety Data Sheets (SDS) to ensure full compliance with OSHA and Defense Logistics Agency (DLA) regulations. This work is critical for maintaining hazardous materials safety standards at Tinker Air Force Base, where the performance location is designated. The subcontractor will be responsible for accurately developing SDS documents, verifying their alignment with federal safety requirements, and sustaining updates as chemical inventories or regulatory standards evolve. The effort supports the Department of Defense’s obligation to safeguard personnel, environmental health, and operational continuity through rigorous hazardous materials documentation practices. The solicitation, posted on August 9, 2026, requires responses by August 20, 2026, and falls under NAICS code 541620 for scientific and technical consulting services. While no set-aside type is specified, the contract is structured as a subcontract under the Depot Oklahoma organization of the Department of Defense. Performance will occur exclusively at Tinker AFB with a zip code of 73145-8000, and the technical scope demands precise adherence to federal compliance frameworks. Contractors must demonstrate proven capability in SDS lifecycle management with direct experience in defense or government hazardous materials environments to meet the rigorous expectations of this requirement.

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance and DocumentationThe contract requires comprehensive identification and documentation of hazardous materials in accordance with OSHA’s Hazard Communication Standard and DFARS 252.223-7001, ensuring all regulated substances are properly categorized and disclosed. Contractors must prepare, maintain, and submit accurate Safety Data Sheets for each hazardous material, along with ensuring all containers and storage areas are labeled in full compliance with federal regulations. The work is scoped to support DoD maintenance, repair, and operations activities, with performance centered in San Diego, California, under a Small Business Set-Aside designation as defined by the SBA and FAR 19.5. The NAICS code 541620 indicates this effort falls under environmental consulting services, and submissions must be completed by the response deadline of August 20, 2026, following the solicitation posted on August 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance & Documentation SupportThe contract requires full compliance with environmental regulations prohibiting the use of ozone-depleting substances and mercury in all materials and processes, ensuring that no prohibited substances are introduced at any stage of performance. It also mandates support for hazardous communication labeling and the provision of accurate material certifications to verify the safety and regulatory status of all components and substances used. All activities must adhere strictly to federal environmental and safety standards, with documentation submitted to confirm adherence. This is a small business set-aside subcontract under NAICS code 541620, issued by the Department of Defense’s Fluid Handling Division with a place of performance in San Diego, California. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. Only small business concerns are eligible to bid, as specified by the SBA’s Total Small Business Set-Aside rules. The contract emphasizes rigorous documentation and traceability of materials to ensure environmental compliance and occupational safety.

FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

Hazard Communication & Labeling Compliance

CHERRY POINT PHANTOM RD BLDG

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → WARNER ROBINS

Same awarding agency

Export Control and Technical Data ManagementThis contract mandates strict adherence to U.S. export control regulations, specifically ITAR and EAR, for the handling and access of technical data. All personnel involved must undergo training to ensure compliance, maintain detailed access logs for auditability, and follow the protocols of the U.S. and Canada Joint Certification Program to authenticate and authorize access to controlled information. The requirement applies to all phases of technical data management, from receipt to transmission, and is non-negotiable for project execution. The contract is a subcontract issued under the Department of Defense, with performance centered at Robins Air Force Base, Georgia, and is classified under NAICS code 541611 for management consulting services. Responses are due by August 20, 2026, and the solicitation was posted on August 9, 2026. While no specific set-aside designation is indicated, compliance with export control regimes remains the central objective, and failure to meet these terms will result in disqualification or contract termination.

Administrative Management and General Management Consulting Services

POSTED

about 4 hours ago

DEADLINE

Cybersecurity and CUI SafeguardingThe contract entails the implementation and ongoing maintenance of comprehensive cybersecurity controls to ensure compliance with CMMC Level 2 and NIST SP 800-171 standards for systems handling controlled unclassified information. The work is focused on safeguarding CUI within the operational environment at Robins Air Force Base, Georgia, under the Department of Defense’s Warner Robins organization. The contractor must establish, validate, and sustain a robust security posture that aligns with federal requirements, addressing technical, administrative, and physical controls necessary to protect sensitive data from unauthorized access, disclosure, or compromise. This is a subcontract opportunity with a NAICS code of 541512, indicating it pertains to computer systems design services. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, providing a tight window for qualified entities to submit proposals. Performance must be executed at the specified location in Robins AFB, and the contractor is expected to demonstrate proven experience in delivering CMMC and NIST compliance solutions, including documentation, auditing, and continuous monitoring capabilities. The absence of a set-aside designation means the opportunity is open to all eligible small and large businesses, with evaluation likely centered on technical capability, past performance, and compliance readiness.

Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

Military Packaging, Labeling, and Marking ComplianceThe contract requires compliance with military packaging, labeling, and marking standards for valve units, specifically adhering to ASTM D3951, MIL-STD-129, and DLA RP001. All units must be properly preserved to prevent damage during storage and transit, palletized in accordance with prescribed military protocols, and labeled with 2D data matrix barcodes to ensure traceability and automated handling throughout the supply chain. The work is classified as a subcontract under NAICS code 493190, and performance is designated for Robins AFB, Georgia, with a zip code of 31098-1887. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with the contracting activity under the Department of Defense and managed by the Warner Robins office.

Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

Precision Manufacturing of Directional Control Linear ValvesThe contract requires the manufacture of twelve precision directional control linear valves featuring sleeve and slide-type designs, built to meet rigorous military specifications governing dimensional accuracy, material composition, and operational performance under demanding conditions. Each unit must be produced with stringent quality controls to ensure reliability and consistency in high-stakes defense applications, adhering to industry standards for precision machining and material integrity. The valves are intended for use in critical systems where failure is not an option, necessitating full compliance with technical requirements beyond commercial norms. The work is to be performed at Robins AFB, Georgia, with a delivery deadline tied to the contract’s response due date of August 20, 2026. This is a subcontract opportunity under the NAICS code 332912, indicating classification within other fabricated metal product manufacturing, and is managed by the Department of Defense through the Warner Robins organization. Proposals must be submitted through the DIBBS platform by the stated deadline, and all manufacturers must demonstrate capability to meet exacting military performance thresholds without deviation, including documented evidence of material sourcing, quality assurance protocols, and testing procedures.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

Mill Certification and Quality Documentation ServicesThe contract requires the preparation and submission of Certificate of Quality Compliance, commonly referred to as Mill-Material Certification, for every shipment made under the agreement, in strict accordance with Defense Logistics Agency requirements and the Contract Data Requirements List item METALSCERT. This entails ensuring that all metallic materials shipped are accompanied by documented proof of material conformity, including chemical composition, mechanical properties, and manufacturing process verification, as mandated by federal defense standards. The work is part of a subcontract under the NAICS code 541380, with performance centered at Robins AFB, Georgia, 31098-1887, and is administered by the Department of Defense through the Warner Robins agency. Responses must be submitted by August 20, 2026, with the solicitation posted on August 9, 2026, and all activities must align with DLA’s quality control protocols for military-supplied materials.

Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

Barcoding and Shipment Marking ServicesThe contract requires the application of permanent 2D Data Matrix barcodes and continuous identification markings on aluminum sheets in strict compliance with MIL-STD-129R standards, ensuring durable and legible labeling for military logistics and tracking purposes. The work must be performed at Robins AFB, Georgia, with the contractor responsible for meeting all technical specifications related to barcode sizing, placement, material adhesion, and marking durability under environmental and operational conditions typical of defense supply chains. This subcontract is issued under NAICS code 541690 and is solicited by the Department of Defense through the Warner Robins office, with responses due by August 20, 2026. The contract involves precision labeling services critical for inventory control and supply chain integrity, and bidders must demonstrate the capability to execute high-volume, high-accuracy marking operations that adhere fully to federal military standards without reliance on proprietary or non-standard methods. All work is expected to be completed at the specified performance location, and the successful vendor must support the broader defense logistics infrastructure through reliable, auditable, and repeatable marking processes.

Other Scientific and Technical Consulting Services

POSTED

about 4 hours ago

DEADLINE

Hazard Communication and Labeling Compliance ServicesThe contract requires the development and application of hazard labels and Material Safety Data Sheets (MSDS) to ensure full compliance with OSHA, DFARS, and MIL-STD-129 standards for all defense material shipments. The work must be performed in alignment with federal regulations governing the safe handling, storage, and transportation of hazardous materials within the Department of Defense supply chain. This subcontract is focused on accurate labeling and documentation to meet rigorous military and occupational safety requirements, with performance specifically tied to Robins Air Force Base, Georgia, 31098-1887. Submission of proposals is due by August 20, 2026, and the solicitation falls under NAICS code 541690 for other scientific and technical consulting services. All activities must support defense logistics integrity by maintaining consistent, auditable compliance across all labeled and documented shipments.

Other Scientific and Technical Consulting Services

POSTED

about 4 hours ago

DEADLINE

Packaging and Preservation Services for Defense ShipmentsThe contract requires the provision of military-compliant packaging, preservation, and marking services specifically for aluminum sheets, with strict adherence to Level A preservation standards and the use of fiberboard protection to ensure durability and environmental resistance during transport and storage. All materials must meet rigorous defense specifications to safeguard the integrity of the aluminum sheets throughout the supply chain, particularly under demanding operational conditions. The work is to be performed at Robins AFB, Georgia, with a delivery deadline set for August 20, 2026, and the solicitation was posted on August 9, 2026, under the NAICS code 493190 for other warehousing and storage. The contract is structured as a subcontract and falls under the authority of the Department of Defense, managed by the Warner Robbins office, with all packaging and preservation protocols aligned with military regulatory requirements to support defense logistics.

Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

Aluminum Alloy Sheet Metal Manufacturing and SupplyThe contract requires the manufacture and supply of aluminum alloy Alclad sheets conforming to SAE AMS4100G, ASTM, and military packaging standards, ensuring high integrity and compliance with aerospace and defense specifications. The material must meet rigorous mechanical and chemical criteria for durability, corrosion resistance, and performance under operational conditions, with strict adherence to quality control protocols throughout production and inspection. Packaging and labeling must comply with military standards to preserve material condition during transit and storage. This is a subcontract issued under NAICS code 331491 by the Department of Defense through the Warner Robins office, with performance located at Robins Air Force Base, Georgia, 31098-1887. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. Interested parties must submit proposals that demonstrate capability to consistently deliver certified material meeting all technical requirements, with emphasis on traceability, documentation, and timely fulfillment. The contract does not specify a set-aside category, indicating open competition for qualified suppliers.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 4 hours ago

DEADLINE

Packaging, Preservation & Marking ServicesThe contract requires the provision of defense-compliant packaging, preservation, and marking services to meet stringent military standards, including CLNG/DRY preservation methods, adherence to MIL-STD-2073-1E packaging specifications, and the application of dual-unit markings for accurate identification and logistics tracking. All work must align with Department of Defense requirements to ensure long-term readiness, protection, and traceability of equipment throughout the supply chain. The services are critical to maintaining operational readiness and must be performed with precision under conditions that safeguard the integrity of sensitive defense materials. The solicitation is issued as a subcontract under NAICS code 493190, with a response deadline of August 20, 2026, and a posting date of August 9, 2026. Performance is designated to occur at Robins Air Force Base, Georgia, with a ZIP code of 31098-1887. The contracting office is part of the Warner Robins organization within the Department of Defense, and vendors must be prepared to meet all technical, regulatory, and logistical expectations associated with federal defense contract fulfillment. No set-aside designation is specified, indicating the opportunity is open to all qualified subcontractors.

Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThis contract requires full compliance with OSHA’s Hazard Communication Standard for all hazardous materials, ensuring accurate labeling and timely submission of associated safety documentation. The work is scoped to maintain regulatory adherence in the handling, storage, and transport of dangerous substances, with an emphasis on clear, standardized labeling and complete recordkeeping to meet federal safety mandates. The contract is listed as a subcontract under NAICS code 541690, issued by the Department of Defense through the Warner Robins office, with the place of performance located at Robins Air Force Base, Georgia, 31098-1887. It was posted on August 9, 2026, and responses are due by August 20, 2026. All work must be executed in alignment with federal occupational safety requirements, and compliance will be strictly enforced at the designated installation.

Other Scientific and Technical Consulting Services

POSTED

about 4 hours ago

DEADLINE

Aluminum Alloy Bar Supply (Round, Drawn)The contract calls for the supply of aluminum alloy 2024 in T851 temper in the form of round drawn bars, meeting exacting dimensional specifications and stringent compliance requirements under federal and defense material standards. This material is intended for critical aerospace and defense applications where structural integrity, fatigue resistance, and precise mechanical properties are non-negotiable. The product must conform to established military and industry specifications to ensure performance under extreme operational conditions. Performance of this contract is mandated to occur at Robins AFB, Georgia, with a response deadline of August 20, 2026, and the solicitation was posted on August 9, 2026. The contracting entity is under the Department of Defense through the Warner Robins office, and the NAICS code 331511 identifies this as a nonferrous metal rolling, drawing, and extruding operation. This is a subcontract opportunity with no set-aside designation, and all suppliers must be prepared to meet the rigorous quality assurance and delivery timelines expected for defense-critical components.

POSTED

about 4 hours ago

DEADLINE