Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Export Control and Technical Data Management

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract mandates strict adherence to U.S. export control regulations, specifically ITAR and EAR, for the handling and access of technical data. All personnel involved must undergo training to ensure compliance, maintain detailed access logs for auditability, and follow the protocols of the U.S. and Canada Joint Certification Program to authenticate and authorize access to controlled information. The requirement applies to all phases of technical data management, from receipt to transmission, and is non-negotiable for project execution. The contract is a subcontract issued under the Department of Defense, with performance centered at Robins Air Force Base, Georgia, and is classified under NAICS code 541611 for management consulting services. Responses are due by August 20, 2026, and the solicitation was posted on August 9, 2026. While no specific set-aside designation is indicated, compliance with export control regimes remains the central objective, and failure to meet these terms will result in disqualification or contract termination.

General Info

Must comply with ITAR/EAR, train personnel, log access, follow U.S.-Canada certification, perform at Robins AFB.

Agency

Department Of Defense → WARNER ROBINSView Agency

NAICS

541611 - Administrative Management and General Management Consulting ServicesView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → WARNER ROBINS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → WARNER ROBINS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure ITAR/EAR compliance for technical data access, including training, access logging, and adherence to US/Canada Joint Certification Program requirements.

Similar Contracts

Same NAICS industry code

Supply Chain Compliance & Regulatory ReportingThe contract titled Supply Chain Compliance & Regulatory Reporting is a subcontract issued by the Department of Defense through DLA DIST SAN JOAQUIN, with a place of performance in Tracy, California, zip code 95304-5000. It is aimed at supporting critical regulatory obligations related to the defense supply chain, including the mandatory disclosure of covered defense telecommunications equipment, identification and management of foreign providers, and accurate upkeep of UEI and CAGE codes. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 541611, indicating management, scientific, and technical consulting services. The requirement emphasizes strict adherence to federal compliance standards essential for national security and supply chain integrity, though no set-aside designation or point of contact details are provided. Interested parties must respond via the provided DIBBS link before the deadline.

DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

Export Control and Technical Data ComplianceThis contract requires strict adherence to export control regulations, specifically DFARS 252.225-7048 and RQ032, ensuring all technical data and documentation are managed in compliance with ITAR and EAR requirements. Responsibilities include implementing robust access controls, secure handling procedures, and maintaining full audit readiness to demonstrate compliance throughout the contract lifecycle. The work is to be performed at Tracy, California, with a zip code of 95304-5000, and falls under the NAICS code 541611, indicating it is related to scientific research and development services. The contract is structured as a subcontract, with a response deadline of August 20, 2026, and was posted on August 9, 2026, under the Department of Defense’s Electrical Devices Division. All technical data must be safeguarded against unauthorized access or disclosure, and systems must be configured to support ongoing compliance monitoring and documentation retention as required by federal export control standards.

ELECTRICAL DEVICES DIV

POSTED

about 4 hours ago

DEADLINE

ITAR/EAR Compliance and Technical Data ManagementThe contract requires strict management of export-controlled technical data and full compliance with the International Traffic in Arms Regulations and the Export Administration Regulations throughout all phases of manufacturing and subcontracting. It mandates rigorous controls over the handling, storage, transmission, and access to sensitive technical information to prevent unauthorized disclosure to foreign persons or entities, ensuring adherence to U.S. national security and foreign policy objectives. All subcontractors and suppliers must be vetted and contractually bound to maintain equivalent compliance standards, with documented procedures for personnel training, recordkeeping, and internal audits. The work is to be performed at Hill Air Force Base, Utah, under a subcontract structure with a NAICS code indicating engineering services, and is managed by the Department of Defense. The solicitation was posted on August 9, 2026, with a firm deadline for responses on August 20, 2026, requiring proposers to demonstrate proven experience in ITAR/EAR compliance, robust data control systems, and a clear understanding of defense manufacturing supply chain obligations. Non-compliance could result in severe penalties, contract termination, or loss of export privileges, making regulatory diligence a central requirement for award and performance.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

Small Business Subcontracting & Representation SupportThe contract titled Small Business Subcontracting & Representation Support is issued by the Department of Defense through DEPOT OKLAHOMA for services related to post-award small business representation at TINKER AFB with a zip code of 73145-8000. It focuses on ensuring compliance with small business regulations by providing support for size status updates, socioeconomic disclosures, and re-representations prior to option periods, which are critical for maintaining eligibility and adherence to federal subcontracting requirements. The work falls under NAICS code 541611, indicating a scope tied to management consulting services, likely involving administrative and compliance guidance for subcontractors. This is a subcontract action with no set-aside designation, open for responses between August 9 and August 20, 2026. The contract does not specify a point of contact or detailed organization type, and no solicitation number is provided. Bidders must ensure they have the capability to manage dynamic representation obligations tied to small business status changes and can deliver timely, accurate documentation to sustain compliance throughout the contract’s lifecycle, particularly around option period elections. The work is performance-based and centered on sustaining regulatory integrity in subcontracting relationships under a Department of Defense prime contract.

POSTED

about 4 hours ago

DEADLINE

Export-Controlled Technical Data ManagementThis contract pertains to the management and protection of export-controlled technical data in strict compliance with the International Traffic in Arms Regulations and the Export Administration Regulations, alongside secure handling protocols to ensure the confidentiality and integrity of sensitive information. The work involves safeguarding technical data that is subject to U.S. government export controls, requiring implementation of rigorous security measures, personnel training, and procedural controls to prevent unauthorized access, disclosure, or transfer. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to respond, as designated by the Small Business Administration and governed by FAR 19.5. The North American Industry Classification System code 541611 indicates the scope aligns with administrative management and general management consulting services, suggesting the need for expert advisory and compliance oversight rather than direct manufacturing or engineering. The contract is managed by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at the facility located in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, indicating a relatively short turnaround window for qualified small businesses to prepare and submit proposals. Contractors must demonstrate proven capability in handling sensitive technical data under ITAR and EAR frameworks, with documented compliance programs, secure facilities, and trained personnel who understand the legal and operational demands of protecting defense-related technology. Failure to adhere to these requirements may result in severe penalties, including loss of clearance, financial liability, and potential criminal charges, making compliance as critical as the technical execution of the work.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Small Business Subcontracting and Socioeconomic Compliance SupportThe contract seeks consulting support to assist a prime contractor in achieving small business subcontracting goals and ensuring full compliance with socioeconomic program requirements, including accurate reporting and proper disclosure of joint ventures. The scope of work is focused on providing expert guidance to navigate federal subcontracting regulations, help meet utilization targets for small, disadvantaged, and other designated business categories, and maintain documentation that satisfies federal audit and compliance standards. Support services will be delivered in alignment with NAICS code 541611 and are required to be performed at a designated location in San Diego, California, with a response deadline of August 20, 2026. The contract is issued under the Department of Defense and is intended to strengthen the prime contractor’s ability to fulfill its federal obligations related to small business participation and socioeconomic program adherence, with particular attention to transparency and regulatory accuracy in all subcontracting activities.

POSTED

about 4 hours ago

DEADLINE

Domestic Content and Material Disclosure ComplianceThe contract requires strict verification and documentation of domestic versus non-domestic materials used in the manufacturing of valves, ensuring full compliance with the Defense Federal Acquisition Regulation Supplement (DFARS). All subcontractors must accurately track, report, and disclose the origin of materials to meet federal sourcing requirements, with submissions due by the established deadline. This obligation is critical to affirm adherence to domestic preference statutes and to support national security objectives through transparent and auditable supply chain practices. Performance of this contract is centered at the New Cumberland facility with a zip code of 17070-5002, under the oversight of the Department of Defense’s DDSP New Cumberland Facility. The contract is classified as a subcontract and falls under the NAICS code 541611, indicating it involves administrative management and general management consulting services related to compliance and procurement. Response submissions must be completed by August 20, 2026, and the solicitation remains open for responses until that time. All parties must ensure their documentation accurately reflects material origins and meets DFARS reporting standards without exception.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Small Business Subcontracting and Accelerated Payment AdministrationThe contract titled Small Business Subcontracting and Accelerated Payment Administration is a total small business set-aside under the SBA program, meaning only eligible small businesses can compete for it. It requires the contractor to administer subcontracting efforts specifically directed toward small business concerns including Women-Owned Small Businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone firms, and 8(a) participants. A core component of the contract is the implementation of accelerated payment terms as mandated by FAR clauses to ensure timely cash flow for these designated small businesses. The work is scoped under NAICS code 541611 and will be performed in San Diego, CA, with a response deadline of August 20, 2026. The contract is being managed by the Department of Defense through its San Diego office, and all activities must align with federal contracting requirements to foster small business participation and financial stability within the subcontracting chain.

POSTED

about 4 hours ago

DEADLINE

Subcontract Management for Commercial ItemsThe contract requires the administration of subcontracting activities for commercial products and services under the Defense Federal Acquisition Regulation Supplement section 252.244-7999, with a strict focus on compliance with applicable flow-down clauses and the specific requirements for commercial items. The contractor must ensure all subcontractors adhere to the regulatory framework governing commercial item procurements, including proper documentation, evaluation, and oversight to maintain alignment with federal mandates and avoid noncompliance risks. This role necessitates a thorough understanding of commercial item definitions, subcontractor selection criteria, and the proper incorporation of contractual clauses without imposing unnecessary or nonapplicable federal requirements. The contract is issued by the Defense Logistics Agency under the Department of Defense and is classified under NAICS code 541611, which pertains to management consulting services. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026. While the place of performance and point of contact details are unspecified, the contract is accessible via the DIBBS platform for further submission details. There is no set-aside designation, and the contract type is clearly identified as a subcontract, emphasizing the need for effective subcontract management rather than direct performance of services.

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

Domestic and Ethical Sourcing Compliance MonitoringThe contract titled Domestic and Ethical Sourcing Compliance Monitoring is a subcontract under the Department of Defense, managed by the Warner Robbins office, with performance required at Robins AFB, Georgia, 31098-1887. It mandates strict adherence to prohibitions against the use of materials linked to forced labor or human trafficking, requiring full compliance with labor ethics standards throughout the supply chain. All parties must implement monitoring procedures to ensure no prohibited materials enter production, maintain documented evidence of ethical sourcing, and uphold transparency in vendor relationships to align with federal and international labor compliance regulations. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 541611 for management consulting services.

POSTED

about 4 hours ago

DEADLINE

Defense Telecommunications Equipment Compliance (Supplier Vetting)This contract requires suppliers to ensure that no covered foreign telecommunications equipment is utilized within any IT systems under their control, enforcing strict compliance through comprehensive supply chain audits and accurate representation in the System for Award Management. The obligation extends to verifying the origins and components of all telecommunications hardware and software to prevent the inclusion of equipment deemed a national security risk under applicable U.S. regulations. Suppliers must demonstrably implement vetting procedures that trace equipment through every tier of their supply chain and maintain documented evidence to support compliance during audits or inspections. The contract is issued as a subcontract under the Department of Defense, with performance centered at Tinker Air Force Base, Oklahoma, and is categorized under NAICS code 541611 for management consulting services. Bidders must respond by the specified deadline of August 20, 2026, and are expected to demonstrate established protocols for ongoing monitoring and verification of equipment sourcing. Failure to comply with the prohibition on covered foreign telecommunications equipment will result in non-compliance with federal procurement standards and may lead to termination or penalties. The contracting activity is managed by Depot Oklahoma, underscoring the importance of maintaining secure and trusted IT infrastructure within defense operations.

POSTED

about 4 hours ago

DEADLINE

Export Compliance and Regulatory SupportThe contract requires full compliance with International Traffic in Arms Regulations and Export Administration Regulations, encompassing the management of documentation, licensing support, and accurate CAGE and UEI reporting to ensure adherence to federal export control standards. It demands rigorous supply chain transparency to verify the origin and handling of controlled items, with an emphasis on maintaining rigorous audit-ready records and proactive regulatory alignment throughout the contracting lifecycle. This is a small business set-aside subcontract under NAICS code 541611, issued by the Department of Defense through DLA Dist San Joaquin, with performance location in Tracy, California, 95304-5000. The solicitation opened on August 9, 2026, and responses are due by August 20, 2026, targeting qualified small business entities to provide specialized export compliance services supporting defense-related logistics and regulatory frameworks.

DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → WARNER ROBINS

Same awarding agency

Cybersecurity and CUI SafeguardingThe contract entails the implementation and ongoing maintenance of comprehensive cybersecurity controls to ensure compliance with CMMC Level 2 and NIST SP 800-171 standards for systems handling controlled unclassified information. The work is focused on safeguarding CUI within the operational environment at Robins Air Force Base, Georgia, under the Department of Defense’s Warner Robins organization. The contractor must establish, validate, and sustain a robust security posture that aligns with federal requirements, addressing technical, administrative, and physical controls necessary to protect sensitive data from unauthorized access, disclosure, or compromise. This is a subcontract opportunity with a NAICS code of 541512, indicating it pertains to computer systems design services. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, providing a tight window for qualified entities to submit proposals. Performance must be executed at the specified location in Robins AFB, and the contractor is expected to demonstrate proven experience in delivering CMMC and NIST compliance solutions, including documentation, auditing, and continuous monitoring capabilities. The absence of a set-aside designation means the opportunity is open to all eligible small and large businesses, with evaluation likely centered on technical capability, past performance, and compliance readiness.

Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

Hazardous and Radioactive Materials ComplianceThe contract requires comprehensive management of hazardous and radioactive materials employed in manufacturing and packaging operations, including precise identification, safe handling procedures, and proper labeling in accordance with established regulatory standards. A critical component involves the preparation and maintenance of Safety Data Sheets to ensure regulatory compliance and worker safety, alongside adherence to MIL-STD-129 for the packaging, marking, and documentation of hazardous shipments. All activities must align with strict Department of Defense protocols to ensure the secure and lawful transportation and use of dangerous substances. The work is to be performed at Robins Air Force Base, Georgia, 31098-1887, under a subcontract solicitation issued by the Department of Defense through the Warner Robins office. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 541620, which categorizes scientific and technical consulting services. Contractors must demonstrate proven expertise in hazardous materials handling and DOD compliance to meet the requirements, with no set-aside provisions specified for small or disadvantaged businesses.

Environmental Consulting Services

POSTED

about 4 hours ago

DEADLINE

Military Packaging, Labeling, and Marking ComplianceThe contract requires compliance with military packaging, labeling, and marking standards for valve units, specifically adhering to ASTM D3951, MIL-STD-129, and DLA RP001. All units must be properly preserved to prevent damage during storage and transit, palletized in accordance with prescribed military protocols, and labeled with 2D data matrix barcodes to ensure traceability and automated handling throughout the supply chain. The work is classified as a subcontract under NAICS code 493190, and performance is designated for Robins AFB, Georgia, with a zip code of 31098-1887. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with the contracting activity under the Department of Defense and managed by the Warner Robins office.

Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

Precision Manufacturing of Directional Control Linear ValvesThe contract requires the manufacture of twelve precision directional control linear valves featuring sleeve and slide-type designs, built to meet rigorous military specifications governing dimensional accuracy, material composition, and operational performance under demanding conditions. Each unit must be produced with stringent quality controls to ensure reliability and consistency in high-stakes defense applications, adhering to industry standards for precision machining and material integrity. The valves are intended for use in critical systems where failure is not an option, necessitating full compliance with technical requirements beyond commercial norms. The work is to be performed at Robins AFB, Georgia, with a delivery deadline tied to the contract’s response due date of August 20, 2026. This is a subcontract opportunity under the NAICS code 332912, indicating classification within other fabricated metal product manufacturing, and is managed by the Department of Defense through the Warner Robins organization. Proposals must be submitted through the DIBBS platform by the stated deadline, and all manufacturers must demonstrate capability to meet exacting military performance thresholds without deviation, including documented evidence of material sourcing, quality assurance protocols, and testing procedures.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

Mill Certification and Quality Documentation ServicesThe contract requires the preparation and submission of Certificate of Quality Compliance, commonly referred to as Mill-Material Certification, for every shipment made under the agreement, in strict accordance with Defense Logistics Agency requirements and the Contract Data Requirements List item METALSCERT. This entails ensuring that all metallic materials shipped are accompanied by documented proof of material conformity, including chemical composition, mechanical properties, and manufacturing process verification, as mandated by federal defense standards. The work is part of a subcontract under the NAICS code 541380, with performance centered at Robins AFB, Georgia, 31098-1887, and is administered by the Department of Defense through the Warner Robins agency. Responses must be submitted by August 20, 2026, with the solicitation posted on August 9, 2026, and all activities must align with DLA’s quality control protocols for military-supplied materials.

Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

Barcoding and Shipment Marking ServicesThe contract requires the application of permanent 2D Data Matrix barcodes and continuous identification markings on aluminum sheets in strict compliance with MIL-STD-129R standards, ensuring durable and legible labeling for military logistics and tracking purposes. The work must be performed at Robins AFB, Georgia, with the contractor responsible for meeting all technical specifications related to barcode sizing, placement, material adhesion, and marking durability under environmental and operational conditions typical of defense supply chains. This subcontract is issued under NAICS code 541690 and is solicited by the Department of Defense through the Warner Robins office, with responses due by August 20, 2026. The contract involves precision labeling services critical for inventory control and supply chain integrity, and bidders must demonstrate the capability to execute high-volume, high-accuracy marking operations that adhere fully to federal military standards without reliance on proprietary or non-standard methods. All work is expected to be completed at the specified performance location, and the successful vendor must support the broader defense logistics infrastructure through reliable, auditable, and repeatable marking processes.

Other Scientific and Technical Consulting Services

POSTED

about 4 hours ago

DEADLINE

Hazard Communication and Labeling Compliance ServicesThe contract requires the development and application of hazard labels and Material Safety Data Sheets (MSDS) to ensure full compliance with OSHA, DFARS, and MIL-STD-129 standards for all defense material shipments. The work must be performed in alignment with federal regulations governing the safe handling, storage, and transportation of hazardous materials within the Department of Defense supply chain. This subcontract is focused on accurate labeling and documentation to meet rigorous military and occupational safety requirements, with performance specifically tied to Robins Air Force Base, Georgia, 31098-1887. Submission of proposals is due by August 20, 2026, and the solicitation falls under NAICS code 541690 for other scientific and technical consulting services. All activities must support defense logistics integrity by maintaining consistent, auditable compliance across all labeled and documented shipments.

Other Scientific and Technical Consulting Services

POSTED

about 4 hours ago

DEADLINE

Packaging and Preservation Services for Defense ShipmentsThe contract requires the provision of military-compliant packaging, preservation, and marking services specifically for aluminum sheets, with strict adherence to Level A preservation standards and the use of fiberboard protection to ensure durability and environmental resistance during transport and storage. All materials must meet rigorous defense specifications to safeguard the integrity of the aluminum sheets throughout the supply chain, particularly under demanding operational conditions. The work is to be performed at Robins AFB, Georgia, with a delivery deadline set for August 20, 2026, and the solicitation was posted on August 9, 2026, under the NAICS code 493190 for other warehousing and storage. The contract is structured as a subcontract and falls under the authority of the Department of Defense, managed by the Warner Robbins office, with all packaging and preservation protocols aligned with military regulatory requirements to support defense logistics.

Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

Aluminum Alloy Sheet Metal Manufacturing and SupplyThe contract requires the manufacture and supply of aluminum alloy Alclad sheets conforming to SAE AMS4100G, ASTM, and military packaging standards, ensuring high integrity and compliance with aerospace and defense specifications. The material must meet rigorous mechanical and chemical criteria for durability, corrosion resistance, and performance under operational conditions, with strict adherence to quality control protocols throughout production and inspection. Packaging and labeling must comply with military standards to preserve material condition during transit and storage. This is a subcontract issued under NAICS code 331491 by the Department of Defense through the Warner Robins office, with performance located at Robins Air Force Base, Georgia, 31098-1887. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. Interested parties must submit proposals that demonstrate capability to consistently deliver certified material meeting all technical requirements, with emphasis on traceability, documentation, and timely fulfillment. The contract does not specify a set-aside category, indicating open competition for qualified suppliers.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 4 hours ago

DEADLINE

Packaging, Preservation & Marking ServicesThe contract requires the provision of defense-compliant packaging, preservation, and marking services to meet stringent military standards, including CLNG/DRY preservation methods, adherence to MIL-STD-2073-1E packaging specifications, and the application of dual-unit markings for accurate identification and logistics tracking. All work must align with Department of Defense requirements to ensure long-term readiness, protection, and traceability of equipment throughout the supply chain. The services are critical to maintaining operational readiness and must be performed with precision under conditions that safeguard the integrity of sensitive defense materials. The solicitation is issued as a subcontract under NAICS code 493190, with a response deadline of August 20, 2026, and a posting date of August 9, 2026. Performance is designated to occur at Robins Air Force Base, Georgia, with a ZIP code of 31098-1887. The contracting office is part of the Warner Robins organization within the Department of Defense, and vendors must be prepared to meet all technical, regulatory, and logistical expectations associated with federal defense contract fulfillment. No set-aside designation is specified, indicating the opportunity is open to all qualified subcontractors.

Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThis contract requires full compliance with OSHA’s Hazard Communication Standard for all hazardous materials, ensuring accurate labeling and timely submission of associated safety documentation. The work is scoped to maintain regulatory adherence in the handling, storage, and transport of dangerous substances, with an emphasis on clear, standardized labeling and complete recordkeeping to meet federal safety mandates. The contract is listed as a subcontract under NAICS code 541690, issued by the Department of Defense through the Warner Robins office, with the place of performance located at Robins Air Force Base, Georgia, 31098-1887. It was posted on August 9, 2026, and responses are due by August 20, 2026. All work must be executed in alignment with federal occupational safety requirements, and compliance will be strictly enforced at the designated installation.

Other Scientific and Technical Consulting Services

POSTED

about 4 hours ago

DEADLINE

Aluminum Alloy Bar Supply (Round, Drawn)The contract calls for the supply of aluminum alloy 2024 in T851 temper in the form of round drawn bars, meeting exacting dimensional specifications and stringent compliance requirements under federal and defense material standards. This material is intended for critical aerospace and defense applications where structural integrity, fatigue resistance, and precise mechanical properties are non-negotiable. The product must conform to established military and industry specifications to ensure performance under extreme operational conditions. Performance of this contract is mandated to occur at Robins AFB, Georgia, with a response deadline of August 20, 2026, and the solicitation was posted on August 9, 2026. The contracting entity is under the Department of Defense through the Warner Robins office, and the NAICS code 331511 identifies this as a nonferrous metal rolling, drawing, and extruding operation. This is a subcontract opportunity with no set-aside designation, and all suppliers must be prepared to meet the rigorous quality assurance and delivery timelines expected for defense-critical components.

POSTED

about 4 hours ago

DEADLINE