Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aluminum Alloy Sheet Metal Manufacturing and Supply

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and supply of aluminum alloy Alclad sheets conforming to SAE AMS4100G, ASTM, and military packaging standards, ensuring high integrity and compliance with aerospace and defense specifications. The material must meet rigorous mechanical and chemical criteria for durability, corrosion resistance, and performance under operational conditions, with strict adherence to quality control protocols throughout production and inspection. Packaging and labeling must comply with military standards to preserve material condition during transit and storage. This is a subcontract issued under NAICS code 331491 by the Department of Defense through the Warner Robins office, with performance located at Robins Air Force Base, Georgia, 31098-1887. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. Interested parties must submit proposals that demonstrate capability to consistently deliver certified material meeting all technical requirements, with emphasis on traceability, documentation, and timely fulfillment. The contract does not specify a set-aside category, indicating open competition for qualified suppliers.

General Info

Manufacture and supply of Alclad aluminum sheets to aerospace and defense standards, due August 20, 2026.

Agency

Department Of Defense → WARNER ROBINSView Agency

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → WARNER ROBINS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → WARNER ROBINS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of aluminum alloy Alclad sheets meeting SAE AMS4100G, ASTM, and military packaging standards.

Similar Contracts

Same NAICS industry code

Supply of Aluminum Alloy Sheet Metal

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2072

The contract specifies the procurement of aluminum alloy sheet metal with precise dimensional and material requirements: 0.063 inches thick, 36 inches wide, and 72 inches long, weighing approximately 16 pounds per sheet. The material must conform to Alloy 6061 in T6 temper as defined by SAE AMS4027P and ASTM standards, with full compliance to Technical Data Package Rev B Gen 2 referenced under drawing number 14153 01735 and quality assurance program QAP 13873. A Certificate of Quality Compliance, including mill material certification, must accompany every shipment and be submitted to the contracting officer. Continuous identification markings are required on each unit, including the DLA contract number, NSN, specification revision, alloy, grade, temper, manufacturer name, heat and lot number, and dimensions. Markings must be applied via stamping or stenciling, be legible, waterproof, and non-contaminating, with adhesive labels mandatory for smaller bar and tube sizes. No test coupons are permitted, and all material must be supplied in whole-foot lengths only. The item is classified as a critical application and is subject to the Qualified Suppliers List for Distributors (QSLD) requirement, meaning only suppliers listed on the official QSLD are eligible to bid; non-compliant offers will be rejected or considered unauthorized substitutions with potential criminal penalties. Packaging must follow MIL-STD-2073-1E and ASTM B660 Level A requirements with preservation code ZZ and marking code Z, in accordance with MIL-STD-129R. Delivery is FOB origin to Tinker AFB, Oklahoma, with no variance allowed in quantity, and the required delivery date is December 2, 2026, with a need ship date of February 1, 2027. The solicitation number is SPE8E4-26-T-2072, and the NSN is 9535-00-084-4448 for a total of six sheets.

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E9-26-T-3409

The contract mandates the procurement of aluminum alloy metal sheets measuring 0.016 inches thick by 48 inches wide by 144 inches long, with exact dimensional compliance required and no test coupons permitted. Each sheet must be marked with continuous identification including the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot number, and dimensions, using only stamping or stenciling methods that are legible, waterproof, and non-contaminating; adhesive labels are required for smaller bars and tubes. A Certificate of Quality Compliance, issued by the mill, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001 requirements, with Level A preservation per ASTM B660, robust edge and corner protection, and full fiberboard top and bottom coverage. Marking must also comply with MIL-STD-129. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and failure to comply with QSLD requirements constitutes an unauthorized substitution with potential criminal penalties. The shipment of 200 sheets is bound for Robins Air Force Base, Georgia, and 12 additional sheets for Cherry Point, North Carolina, both with a 48-day delivery window and FOB origin terms. The NSN 9535-00-684-1439 is governed by ASTM B666/B666M-20 and ASTM B660-23 standards, with all documentation tied to the DLA Master List of Technical and Quality Requirements. No quantity variance is permitted, inspection and acceptance occur at destination, and the contract is a total small business set-aside under NAICS code 331491.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2073

The contract specifies a metal plate made of aluminum alloy 6061 in temper T651, with exact dimensions of 0.3125 inches thick, 48 inches wide, and 144 inches long, delivered in whole-foot lengths only. The item weighs approximately 212.16 pounds per piece and is identified by NSN 9535-00-231-8232, with a required quantity of nine pieces. Strict compliance with technical specifications is mandated under referenced standards including SAE AMS4027P, MIL-STD-129R, ASTM B666/B666M-20, and ASTM B660-23, with material certification required for every shipment in the form of a Certificate of Quality Compliance, which must accompany each delivery and be forwarded to the contracting officer. Continuous markings on each unit must include the DLA contract number, NSN, specification revision, alloy grade, manufacturer name, heat and lot numbers, dimensions, and temper, with only stamping or stenciling permitted as marking methods—labels required for smaller bars and tubes under 0.250 inches in diameter. The procurement is subject to the Qualified Suppliers List for Distributors (QSLD) requirement, limiting eligibility to suppliers listed on the official QSLD; any deviation must be explicitly declared and may be considered an unauthorized substitution with potential criminal penalties. Packaging must conform to MIL-STD-2073-1E, with preservation and marking following ASTM B660 and additional specified codes, and palletization governed by DLA packaging requirements. Delivery is FOB origin, with inspection and acceptance at destination, and no quantity variance is permitted. The delivery window is 164 days, with an original required delivery date of December 5, 2026, and a need ship date of February 1, 2027, to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. Government information may be potentially classified under RD003, and technical and quality requirements are governed by DLA’s Master List, with contract data requirements such as CDRL-METALSCERT mandatory unless waived under QSL compliance conditions.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2046

The contract specifies the procurement of copper alloy 464 metal bars in round, half-hard temper, with a diameter of 5.500 inches and lengths between 6 and 8 feet, delivered in whole-foot increments only. The material must comply with ASTM B21/B21M-20 Revision 20 and other referenced standards including ASTM B249/B249M-23, ASTM B900-16, and MIL-STD-129R, with full adherence to DLA’s technical and quality requirements as defined in the DLA Master List. A Certificate of Quality Compliance, including mill material certification, is mandatory and must accompany every shipment, with a copy routed to the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer details, heat and lot numbers, and dimensions using approved methods such as stenciling or adhesives, ensuring legibility, water resistance, and no product contamination. The bars must meet stringent dimensional tolerances and are subject to inspection at destination with a permitted quantity variance of plus or minus 10 percent. Packaging must conform to MIL-STD-2073-1E and RP001 DLA packaging requirements, with special preservation marking per ASTM B900 and labeling in compliance with MIL-STD-129, including the special marking code ZZ. Suppliers must be on the Qualified Suppliers List for Distributors (QSLD) and any deviation from this requirement constitutes a bid exception. Non-compliance may result in rejection, penalties, or criminal liability. Delivery is FOB origin to Tracy, CA, with a required delivery date of February 1, 2027, and an original deadline of January 8, 2027. All shipments must include both units of measure when applicable, and transportation must follow DLAD Procurement Notes C19 and C20.

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2074

This contract specifies the procurement of aluminum alloy sheet metal with precise dimensions: 0.020 inches thick, 36.00 inches wide, and 144.00 inches long, weighing approximately 10.15 pounds per sheet. The material must conform to SAE AMS4027P revision P dated April 1, 2022, and meet the requirements of ASTM B666/B666M-20 and ASTM B660-23, with a specified alloy of 6061 in T6 temper. All sheets must be supplied in whole-foot lengths only and strictly adhere to the stated dimensions without the use of test coupons. Continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling using non-contaminating, waterproof, and durable methods. Adhesive labels are required for thin bars, tubes, and shapes under 0.250 inches nominal OD, and tags are acceptable for wire. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement constitutes an exception that must be explicitly declared. Certificates of Quality Compliance, including mill-material certifications, must accompany every shipment and be submitted to the contracting officer. Packaging must comply with MIL-STD-2073-1E and ASTM B660 Level A requirements, with preservation and marking codes ZZ and Z as specified. All items must be marked in accordance with MIL-STD-129R, and palletization must follow DLA packaging standards. The order quantity is 40 sheets, with zero variance allowed, FOB origin, destination inspection and acceptance, and delivery required within 136 days from the award date, with an original delivery deadline of November 2, 2026, and a need ship date of January 4, 2027. The NSN is 9535-00-596-3789, and the contract number is SPE8E4-26-T-2074, with technical and quality requirements governed by the DLA Master List and applicable procurement note M03.

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2058

The contract specifies the procurement of titanium alloy sheet metal in hot rolled, annealed, and descaled condition, with exact dimensions of 0.071 inches thick, 36.00 inches wide, and 96.00 inches long, weighing approximately 41.92 pounds per sheet. The material must conform to SAE AMS4911T and SAE AMS4907M specifications for Grade 6AL-4V and 6AL-4V (ELI) in annealed condition, respectively. Strict dimensional compliance is mandatory; no test coupons are permitted, and material must be supplied in whole-foot lengths only. Comprehensive marking requirements mandate that each sheet be labeled with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that are legible, waterproof, and non-contaminating. Adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches nominal OD. Supplier eligibility is restricted to those listed on the Qualified Suppliers List for Distributors (QSLD) under DLA Troop Support guidelines, and any deviation or use of non-QSLD-sourced material constitutes an unauthorized substitution with potential criminal penalties. The contract waives source inspection requirements for QSLD-compliant suppliers, nullifying applicable quality conformance inspections such as COQC, PVT, and RQ006. A Certificate of Quality Compliance, or mill-material certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E and RP001, requiring robust four-corner and full-side edge protection with fiberboard or better top and bottom coverage. Markings must follow MIL-STD-129, and when dual units are referenced, both must appear on shipping labels. Two delivery lines specify quantities of two and three sheets respectively, with delivery to Robins AFB, GA and New Cumberland, PA, under FOB Origin terms, a zero percent quantity variance, and a mandatory delivery window of 136 days from the solicitation date, with a required ship date of January 4, 2027.

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2060

The contract calls for the delivery of three sheets of titanium alloy, specifically COMP 6AL-4V in annealed condition, with precise dimensions of 0.0800 inches thick, 36.00 inches wide, and 96.00 inches long, conforming to SAE AMS4911T, AMS2809B, and AMS4907M specifications. The material must be hot rolled, annealed, and descaled overall, with no test coupons permitted, and must be supplied in whole foot lengths only. All shipments must include a Certificate of Quality Compliance and metal certification per CDRL-METALSCERT-26124, with full traceability through continuous markings on each unit that include the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer details, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling—adhesive labels are required for narrow bars, tubes, or shapes under 0.250 inches in nominal OD, and tags are acceptable for wire. Packaging must fully comply with MIL-STD-2073-1E, including robust four-corner and side edge protection, fiberboard top and bottom coverage, and palletization per DLA packaging requirements, with all units marked in accordance with MIL-STD-129. Delivery is FOB origin to Robins Air Force Base, Georgia, with inspection and acceptance at destination, and must be completed within 164 days of order award, with a need ship date of February 1, 2027. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement must be explicitly declared; non-compliant products are considered unauthorized substitutions and may result in criminal penalties. The procurement is subject to stringent quality assurance protocols, including waiver of source inspection for QSLD-compliant suppliers, and is governed by FAR and DFARS clauses related to employment equity, trafficking in persons, sustainable products, hazardous materials, subcontracting, and cybersecurity assessment requirements. Offerors must submit electronic proposals via DIBBS, possess a valid UEI and CAGE code, and adhere to the Berry Amendment and Buy American Act requirements. The contract value is estimated at $13,500 based on historical pricing, though no unit price is stated in the solicitation, and payment will be

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2066

This contract specifies the procurement of aluminum alloy sheet metal with exact dimensions of 0.125 inches thickness, 48.00 inches width, and 144.00 inches length, totaling 84.672 pounds per sheet. The material must conform to ASTM B209/B209M Revision A dated 12/01/2021, with alloy 1100 in temper H14, and must strictly adhere to reference drawing 14153 01735 Revision A. All units must be supplied in whole feet lengths only, with no test coupons permitted, and must meet minimum and maximum length requirements specified in the technical data package. Continuous identification markings are mandatory on every unit, including the DLA contract delivery order number, NSN, specification number and revision, alloy grade and temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stamping or stenciling using waterproof, non-contaminating fluids and must remain legible under normal handling conditions. The procurement is governed by DLA Troop Support’s Qualified Suppliers List for Distributors (QSLD), and only suppliers listed on the QSLD are eligible for award; deviations must be explicitly declared. Compliance with the QSL program waives certain inspection requirements such as COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006, except in the case of Foreign Military Sales. A Certificate of Quality Compliance must accompany each shipment and be forwarded to the designated DLA Contracting Officer. Packaging must follow MIL-STD-2073-1E and ASTM B660 with preservation code ZZ, and marking must adhere to MIL-STD-129R. Palletization, preservation, and labeling must comply with the full text of RP001 and any additional requirements stated in the purchase order text. Delivery is FOB origin, with a required delivery date of October 27, 2026, and a need ship date of February 1, 2027. Shipment must be sent to the specified DLA distribution center in Tracy, California, with zero tolerance for quantity variance. Failure to comply with any technical, marking, packaging, or supplier eligibility requirements renders the product subject to rejection and potential criminal penalties.

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2071

This contract specifies the procurement of aluminum alloy Alclad sheet metal with precise dimensions of 0.063 inches thick, 48.00 inches wide, and 144.00 inches long, weighing approximately 43.545 pounds per sheet. The material must fully comply with SAE AMS4100G Revision G, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R, and is designated as a critical application item with stringent quality and traceability requirements. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement must be explicitly disclosed. Non-compliant products, including those manufactured to specification but sourced through unauthorized distributors, are considered unauthorized substitutions and may incur criminal penalties. Each sheet must be permanently and legibly marked with the DLA contract number, NSN, specification revision, alloy, temper, heat and lot number, manufacturer, and exact dimensions using approved methods such as stenciling or stamping—adhesive labels are permitted for smaller items. Continuous identification is mandatory, and material must be delivered in whole-foot lengths only. The contract mandates full compliance with DLA packaging standards per MIL-STD-2073-1E and ASTM B660, requiring Level A preservation, robust edge and corner protection, and full coverage top and bottom protection using fiberboard or better. Packaging must be marked in accordance with MIL-STD-129, with special codes ZZ and Z indicating compliance with specific preservation and marking standards. A Certificate of Quality Compliance, also known as a Mill-Material Certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. No test coupons are permitted, and units must strictly adhere to the required dimensions without tolerance deviations. Delivery is FOB origin to Warner Robins AFB, Georgia, with a required delivery date of June 23, 2026, and a maximum allowable lead time of 53 days. The contract requires strict adherence to all Technical Data Package (TDP) provisions, and failure to meet any marking, certification, or compliance requirement will result in rejection of the product.

POSTED

about 3 hours ago

DEADLINE

CABLE, POWER, ELECTRI

Solicitation # SPE7M1-26-T-269Y

This contract requires the procurement of 32,500 feet of power cable identified by NSN 6145-00-913-2402, to be delivered in continuous length based on the advice code specified in the shipping information, with compliance to strict packaging and preservation standards outlined in MIL-STD-2073-1E and MIL-DTL-12000. The cable must conform to technical specifications MIL-DTL-915/8H and MIL-DTL-915G Sup 1A, and is subject to qualification requirements as it is listed on a Qualified Products List or Qualified Manufacturers List. All supplies must be free of intentional mercury or mercury compounds except for specific exempted uses such as functional batteries, fluorescent lights, sensors, weapon systems, or authorized chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. Delivery is FOB origin with a 165-day delivery window and a ±5% quantity variance permitted, inspection and acceptance occurring at destination, with packaging and marking strictly adhering to MIL-STD-129 and DLA packaging guidelines. The contract is a total small business set-aside under NAICS code 331491, with full and open competition applying, and requires compliance with DLA’s Master List of Technical and Quality Requirements referenced by R or I numbers. The delivery address is the DLA Distribution facility in New Cumberland, PA, with an original required delivery date of October 20, 2027, and a need ship date of February 2, 2027. The solicitation number is SPE7M1-26-T-269Y, issued on August 9, 2026, with responses due by August 20, 2026, and point of contact is Alisha Blanton.

MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

16--DUCT ASSEMBLY,AIR C

Solicitation # SPE4A726T628X

The U.S. Department of Defense, through DLA Aviation, is soliciting quotes for a Small Business Set Aside procurement of NSN 1660011626536, DUCT ASSEMBLY, AIR C, with a total requirement of eight units—seven to be delivered within 511 days and one within 90 days, both to DLA Distribution at W1A8. The solicitation, numbered SPE4A726T628X, was posted on August 6, 2026, and responses must be submitted electronically no later than August 14, 2026. This procurement is classified under NAICS code 331491 and is restricted exclusively to small businesses as defined by the SBA. All responsible suppliers are encouraged to respond, and submissions must be received by the deadline to be considered. Inquiry questions should be directed via email to the designated point of contact, DibbsBSM@dla.mil, with additional information accessible through the official DIBBS solicitation portal. The contract will be awarded to a vendor capable of meeting the delivery schedule and quality standards, with performance taking place under the jurisdiction of the Department of Defense.

POSTED

DEADLINE

More opportunities from Department Of Defense → WARNER ROBINS

Same awarding agency

Export Control and Technical Data ManagementThis contract mandates strict adherence to U.S. export control regulations, specifically ITAR and EAR, for the handling and access of technical data. All personnel involved must undergo training to ensure compliance, maintain detailed access logs for auditability, and follow the protocols of the U.S. and Canada Joint Certification Program to authenticate and authorize access to controlled information. The requirement applies to all phases of technical data management, from receipt to transmission, and is non-negotiable for project execution. The contract is a subcontract issued under the Department of Defense, with performance centered at Robins Air Force Base, Georgia, and is classified under NAICS code 541611 for management consulting services. Responses are due by August 20, 2026, and the solicitation was posted on August 9, 2026. While no specific set-aside designation is indicated, compliance with export control regimes remains the central objective, and failure to meet these terms will result in disqualification or contract termination.

Administrative Management and General Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

Cybersecurity and CUI SafeguardingThe contract entails the implementation and ongoing maintenance of comprehensive cybersecurity controls to ensure compliance with CMMC Level 2 and NIST SP 800-171 standards for systems handling controlled unclassified information. The work is focused on safeguarding CUI within the operational environment at Robins Air Force Base, Georgia, under the Department of Defense’s Warner Robins organization. The contractor must establish, validate, and sustain a robust security posture that aligns with federal requirements, addressing technical, administrative, and physical controls necessary to protect sensitive data from unauthorized access, disclosure, or compromise. This is a subcontract opportunity with a NAICS code of 541512, indicating it pertains to computer systems design services. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, providing a tight window for qualified entities to submit proposals. Performance must be executed at the specified location in Robins AFB, and the contractor is expected to demonstrate proven experience in delivering CMMC and NIST compliance solutions, including documentation, auditing, and continuous monitoring capabilities. The absence of a set-aside designation means the opportunity is open to all eligible small and large businesses, with evaluation likely centered on technical capability, past performance, and compliance readiness.

Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

Hazardous and Radioactive Materials ComplianceThe contract requires comprehensive management of hazardous and radioactive materials employed in manufacturing and packaging operations, including precise identification, safe handling procedures, and proper labeling in accordance with established regulatory standards. A critical component involves the preparation and maintenance of Safety Data Sheets to ensure regulatory compliance and worker safety, alongside adherence to MIL-STD-129 for the packaging, marking, and documentation of hazardous shipments. All activities must align with strict Department of Defense protocols to ensure the secure and lawful transportation and use of dangerous substances. The work is to be performed at Robins Air Force Base, Georgia, 31098-1887, under a subcontract solicitation issued by the Department of Defense through the Warner Robins office. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 541620, which categorizes scientific and technical consulting services. Contractors must demonstrate proven expertise in hazardous materials handling and DOD compliance to meet the requirements, with no set-aside provisions specified for small or disadvantaged businesses.

Environmental Consulting Services

POSTED

about 3 hours ago

DEADLINE

Military Packaging, Labeling, and Marking ComplianceThe contract requires compliance with military packaging, labeling, and marking standards for valve units, specifically adhering to ASTM D3951, MIL-STD-129, and DLA RP001. All units must be properly preserved to prevent damage during storage and transit, palletized in accordance with prescribed military protocols, and labeled with 2D data matrix barcodes to ensure traceability and automated handling throughout the supply chain. The work is classified as a subcontract under NAICS code 493190, and performance is designated for Robins AFB, Georgia, with a zip code of 31098-1887. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with the contracting activity under the Department of Defense and managed by the Warner Robins office.

Other Warehousing and Storage

POSTED

about 3 hours ago

DEADLINE

Precision Manufacturing of Directional Control Linear ValvesThe contract requires the manufacture of twelve precision directional control linear valves featuring sleeve and slide-type designs, built to meet rigorous military specifications governing dimensional accuracy, material composition, and operational performance under demanding conditions. Each unit must be produced with stringent quality controls to ensure reliability and consistency in high-stakes defense applications, adhering to industry standards for precision machining and material integrity. The valves are intended for use in critical systems where failure is not an option, necessitating full compliance with technical requirements beyond commercial norms. The work is to be performed at Robins AFB, Georgia, with a delivery deadline tied to the contract’s response due date of August 20, 2026. This is a subcontract opportunity under the NAICS code 332912, indicating classification within other fabricated metal product manufacturing, and is managed by the Department of Defense through the Warner Robins organization. Proposals must be submitted through the DIBBS platform by the stated deadline, and all manufacturers must demonstrate capability to meet exacting military performance thresholds without deviation, including documented evidence of material sourcing, quality assurance protocols, and testing procedures.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

Mill Certification and Quality Documentation ServicesThe contract requires the preparation and submission of Certificate of Quality Compliance, commonly referred to as Mill-Material Certification, for every shipment made under the agreement, in strict accordance with Defense Logistics Agency requirements and the Contract Data Requirements List item METALSCERT. This entails ensuring that all metallic materials shipped are accompanied by documented proof of material conformity, including chemical composition, mechanical properties, and manufacturing process verification, as mandated by federal defense standards. The work is part of a subcontract under the NAICS code 541380, with performance centered at Robins AFB, Georgia, 31098-1887, and is administered by the Department of Defense through the Warner Robins agency. Responses must be submitted by August 20, 2026, with the solicitation posted on August 9, 2026, and all activities must align with DLA’s quality control protocols for military-supplied materials.

Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

Barcoding and Shipment Marking ServicesThe contract requires the application of permanent 2D Data Matrix barcodes and continuous identification markings on aluminum sheets in strict compliance with MIL-STD-129R standards, ensuring durable and legible labeling for military logistics and tracking purposes. The work must be performed at Robins AFB, Georgia, with the contractor responsible for meeting all technical specifications related to barcode sizing, placement, material adhesion, and marking durability under environmental and operational conditions typical of defense supply chains. This subcontract is issued under NAICS code 541690 and is solicited by the Department of Defense through the Warner Robins office, with responses due by August 20, 2026. The contract involves precision labeling services critical for inventory control and supply chain integrity, and bidders must demonstrate the capability to execute high-volume, high-accuracy marking operations that adhere fully to federal military standards without reliance on proprietary or non-standard methods. All work is expected to be completed at the specified performance location, and the successful vendor must support the broader defense logistics infrastructure through reliable, auditable, and repeatable marking processes.

Other Scientific and Technical Consulting Services

POSTED

about 3 hours ago

DEADLINE

Hazard Communication and Labeling Compliance ServicesThe contract requires the development and application of hazard labels and Material Safety Data Sheets (MSDS) to ensure full compliance with OSHA, DFARS, and MIL-STD-129 standards for all defense material shipments. The work must be performed in alignment with federal regulations governing the safe handling, storage, and transportation of hazardous materials within the Department of Defense supply chain. This subcontract is focused on accurate labeling and documentation to meet rigorous military and occupational safety requirements, with performance specifically tied to Robins Air Force Base, Georgia, 31098-1887. Submission of proposals is due by August 20, 2026, and the solicitation falls under NAICS code 541690 for other scientific and technical consulting services. All activities must support defense logistics integrity by maintaining consistent, auditable compliance across all labeled and documented shipments.

Other Scientific and Technical Consulting Services

POSTED

about 3 hours ago

DEADLINE

Packaging and Preservation Services for Defense ShipmentsThe contract requires the provision of military-compliant packaging, preservation, and marking services specifically for aluminum sheets, with strict adherence to Level A preservation standards and the use of fiberboard protection to ensure durability and environmental resistance during transport and storage. All materials must meet rigorous defense specifications to safeguard the integrity of the aluminum sheets throughout the supply chain, particularly under demanding operational conditions. The work is to be performed at Robins AFB, Georgia, with a delivery deadline set for August 20, 2026, and the solicitation was posted on August 9, 2026, under the NAICS code 493190 for other warehousing and storage. The contract is structured as a subcontract and falls under the authority of the Department of Defense, managed by the Warner Robbins office, with all packaging and preservation protocols aligned with military regulatory requirements to support defense logistics.

Other Warehousing and Storage

POSTED

about 3 hours ago

DEADLINE

Packaging, Preservation & Marking ServicesThe contract requires the provision of defense-compliant packaging, preservation, and marking services to meet stringent military standards, including CLNG/DRY preservation methods, adherence to MIL-STD-2073-1E packaging specifications, and the application of dual-unit markings for accurate identification and logistics tracking. All work must align with Department of Defense requirements to ensure long-term readiness, protection, and traceability of equipment throughout the supply chain. The services are critical to maintaining operational readiness and must be performed with precision under conditions that safeguard the integrity of sensitive defense materials. The solicitation is issued as a subcontract under NAICS code 493190, with a response deadline of August 20, 2026, and a posting date of August 9, 2026. Performance is designated to occur at Robins Air Force Base, Georgia, with a ZIP code of 31098-1887. The contracting office is part of the Warner Robins organization within the Department of Defense, and vendors must be prepared to meet all technical, regulatory, and logistical expectations associated with federal defense contract fulfillment. No set-aside designation is specified, indicating the opportunity is open to all qualified subcontractors.

Other Warehousing and Storage

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThis contract requires full compliance with OSHA’s Hazard Communication Standard for all hazardous materials, ensuring accurate labeling and timely submission of associated safety documentation. The work is scoped to maintain regulatory adherence in the handling, storage, and transport of dangerous substances, with an emphasis on clear, standardized labeling and complete recordkeeping to meet federal safety mandates. The contract is listed as a subcontract under NAICS code 541690, issued by the Department of Defense through the Warner Robins office, with the place of performance located at Robins Air Force Base, Georgia, 31098-1887. It was posted on August 9, 2026, and responses are due by August 20, 2026. All work must be executed in alignment with federal occupational safety requirements, and compliance will be strictly enforced at the designated installation.

Other Scientific and Technical Consulting Services

POSTED

about 3 hours ago

DEADLINE

Aluminum Alloy Bar Supply (Round, Drawn)The contract calls for the supply of aluminum alloy 2024 in T851 temper in the form of round drawn bars, meeting exacting dimensional specifications and stringent compliance requirements under federal and defense material standards. This material is intended for critical aerospace and defense applications where structural integrity, fatigue resistance, and precise mechanical properties are non-negotiable. The product must conform to established military and industry specifications to ensure performance under extreme operational conditions. Performance of this contract is mandated to occur at Robins AFB, Georgia, with a response deadline of August 20, 2026, and the solicitation was posted on August 9, 2026. The contracting entity is under the Department of Defense through the Warner Robins office, and the NAICS code 331511 identifies this as a nonferrous metal rolling, drawing, and extruding operation. This is a subcontract opportunity with no set-aside designation, and all suppliers must be prepared to meet the rigorous quality assurance and delivery timelines expected for defense-critical components.

POSTED

about 3 hours ago

DEADLINE