Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

16--DUCT ASSEMBLY,AIR C

Active

SPE4A726T628XFederal

Response Deadline08/14/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense, through DLA Aviation, is soliciting quotes for a Small Business Set Aside procurement of NSN 1660011626536, DUCT ASSEMBLY, AIR C, with a total requirement of eight units—seven to be delivered within 511 days and one within 90 days, both to DLA Distribution at W1A8. The solicitation, numbered SPE4A726T628X, was posted on August 6, 2026, and responses must be submitted electronically no later than August 14, 2026. This procurement is classified under NAICS code 331491 and is restricted exclusively to small businesses as defined by the SBA. All responsible suppliers are encouraged to respond, and submissions must be received by the deadline to be considered. Inquiry questions should be directed via email to the designated point of contact, DibbsBSM@dla.mil, with additional information accessible through the official DIBBS solicitation portal. The contract will be awarded to a vendor capable of meeting the delivery schedule and quality standards, with performance taking place under the jurisdiction of the Department of Defense.

General Info

Small business set aside for eight air duct assemblies, delivery by 90 and 511 days, bid due August 14, 2026.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

VA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedAug 6

Combined Synopsis

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 12:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / Agency

Department Of Defense → DLA Aviation

View Agency Profile

Office AddressRICHMOND, VA, 23237, USA

Contacts

contact@example.gov

Full Description

Show more

Proposed procurement for NSN 1660011626536 DUCT ASSEMBLY,AIR C: Line 0001 Qty 7 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0511 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0090 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

Aluminum Alloy Alclad Sheet ManufacturingThe contract involves the manufacture and supply of aluminum alloy Alclad sheets adhering strictly to military specifications, with exact requirements for dimensions, cladding thickness, and temper designation to ensure performance and durability under demanding operational conditions. The materials must meet rigorous quality standards to support defense applications, and the production process must verify compliance with established technical criteria throughout all phases of fabrication. The contract is a subcontract issued under the NAICS code 331491, with performance obligated at Tinker Air Force Base, Oklahoma, and a response deadline of August 17, 2026. The contracting entity is the Department of Defense through the Depot Oklahoma office, and the solicitation is managed through the DIBBS system under reference SPE8E426T1945. All proposals must be submitted prior to the deadline to be considered, and suppliers are expected to demonstrate proven capability in producing military-grade Alclad sheets to support critical defense infrastructure.

POSTED

DEADLINE

Precision Laminated Metal Shim Manufacturing

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Titanium Structural Beam Manufacturing & SupplyThe contract calls for the manufacture and supply of titanium alloy structural beams meeting the specifications outlined in MIL-T-81556, requiring strict adherence to dimensional tolerances and full heat and lot traceability to ensure material integrity and compliance with defense standards. The work involves producing precision-engineered components suitable for high-performance aerospace or defense applications, where material consistency and documentation are critical for certification and operational safety. All deliveries must be accompanied by complete traceability records for each heat lot to verify composition, processing history, and quality assurance. This is a small business set-aside subcontract under the SBA program, reserved exclusively for small businesses as defined by the Federal Acquisition Regulation, and is classified under NAICS code 331491 for other nonferrous metal rolling, drawing, and extruding. The solicitation was posted by the Defense Logistics Agency on behalf of the Department of Defense, with responses due by August 17, 2026. Performance location and point of contact details are not specified, but all work must align with federal defense procurement requirements and be submitted through the designated DIBBS platform. Contractors must be prepared to demonstrate compliance with military-grade manufacturing controls, including documentation, inspection protocols, and supply chain transparency.

Defense Logistics Agency

POSTED

DEADLINE

Titanium Metal Sheet SupplyThe contract requires the supply of four sheets of titanium metal that must strictly conform to SAE AMS4901V and SAE AMS2809B material specifications, ensuring the metal meets the required chemical composition, mechanical properties, and processing standards for high-performance applications. Each sheet must be accompanied by full certification documentation verifying compliance with these aerospace-grade standards and must be labeled in accordance with MIL-STD-129 requirements to ensure proper identification, traceability, and handling throughout the supply chain. The performance location is specified as Cherry Point, North Carolina, with a zip code of 28533-5040, indicating the delivery destination for the material. The contract, classified as a subcontract under NAICS code 331491, was posted on August 5, 2026, and responses are due by August 17, 2026, with the acquiring agency being the Department of Defense through the Construction & Equipment MRO SVC I office.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3385

This contract specifies the procurement of titanium metal sheet measuring 0.012 inches thick, 36 inches wide, and 96 inches long, with a weight of 6.76 pounds per sheet, supplied in whole-foot lengths only. The material must conform to SAE AMS4901V and SAE AMS2809B standards, with a required Certificate of Quality Compliance (Mill-Material Certification) included with every shipment, copied to the DLA Troop Support Contracting Officer. All units must bear continuous identification markings including the DLA delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stamping or stenciling using waterproof, non-contaminating fluids and be clearly legible to the unaided eye. Adhesive labels are required for thin bars, tubes, and wires under 0.250 inches nominal OD. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including four-corner and full-edge protection, fiberboard top and bottom protection, and specific special marking codes Z and ZZ as defined by ASTM A700. The product must be delivered FOB origin to DLA Distribution Cherry Point in North Carolina by January 18, 2027, with no variance allowed in quantity. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from this requirement must be explicitly declared. If the supplier is on the QSLD, government inspection requirements such as COQC, PVT, QAP-EQ003, and RQ006 are waived, though full compliance with all other technical and quality provisions remains mandatory. Non-compliance, including unauthorized substitutions from unapproved distributors, may result in criminal penalties. The Technical Data Package references specific CDRLs and quality requirements, accessible through the DLA Master List of Technical and Quality Requirements. The NSN 9535-00-596-2093 corresponds to four sheets, with procurement governed by DLA’s standardized unit of issue and shipping protocols outlined in DLAD Procurement Notes C19 and C20. All documentation, certifications, and packaging must strictly adhere to the specifications provided to avoid rejection of the end product.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3307

This procurement requires aluminum alloy sheet metal with specific dimensions of 0.012 inches thick, 48 inches wide, and 144 inches long, weighing approximately 8.304 pounds per sheet, and must be supplied in whole-foot lengths only. All material must comply with exact specifications and严禁 test coupons; non-conforming sheets will be rejected. A Certificate of Quality Compliance, or Mill-Material Certification, is mandatory for every shipment and must be included with the delivery and submitted separately to the DLA Troop Support Contracting Officer. The material must meet the technical standards referenced in the Technical Data Package, including SAE AMS-QQ-A-250B, ASTM B666/B666M-20, and ASTM B660-23, and must be of Alloy 7075 in T6 temper. Continuous identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, permanent, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches nominal OD. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation, and any deviation from this requirement must be explicitly stated by the offeror. Suppliers on the QSLD are exempt from source inspection unless otherwise specified, and compliance with the QSL program is strictly enforced—failure to comply may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, including robust four-corner protection, full edge coverage, and fiberboard or superior top and bottom protection. Marking must follow MIL-STD-129, with special codes ZZ indicating preservation in accordance with ASTM B660 and marking per ASTM B666. The delivery is FOB origin, with inspection and acceptance occurring at destination, and the entire order of 98 sheets must be delivered within 167 days to Warner Robins Air Force Base, Georgia. Failure to meet any requirement, including marking, packaging, or supplier qualification, will result in rejection of the product.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1954

The contract specifies the procurement of aluminum alloy plate measuring 0.250 inches thick, 48.00 inches wide, and 144.00 inches long, manufactured to SAE AMS-QQ-A-250/8C revision C and other referenced technical standards including ASTM B666/B666M-20 and ASTM B660-23, with a temper of H32 and alloy designation of 5052. The material must be supplied in whole-foot lengths only and conform strictly to the dimensional requirements without exception or allowance for test coupons. Continuous marking is mandatory on every unit, including the DLA contract delivery order number, NSN, specification number and revision, alloy grade and temper, manufacturer’s name, heat and lot number, and exact dimensions, using stamping or stenciling methods that are legible, waterproof, and non-contaminating; adhesive labels are permitted for thin bars and tubes. A Certificate of Quality Compliance must accompany each shipment and be forwarded to the contracting officer, and all packaging must adhere to MIL-STD-2073-1E and ASTM B660 Level A requirements with preservation code ZZ and marking code Z as specified. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from this requirement must be explicitly declared; non-compliant bids are subject to rejection and potential criminal penalties for unauthorized substitutions. Government inspection requirements such as COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006 are waived for QSLD-compliant suppliers, except in Foreign Military Sales cases. The material must be delivered FOB origin, within a 167-day window from the award, with zero tolerance for quantity variance. Packaging and marking must fully comply with MIL-STD-129R, and shipments are to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE8E4-26-T-1954, with a response deadline of August 17, 2026, and a required delivery date of November 27, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and supplemental documents such as the Technical Data Package and CDRLs must be reviewed for full compliance.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1942

This contract specifies the procurement of a metal plate made from aluminum alloy Alclad, measuring 0.313 inches thick, 36.00 inches wide, and 96.00 inches long, with a reference weight of 108.24 pounds per piece. The material must strictly conform to the technical requirements outlined in the DLA Master List of Technical and Quality Requirements and be manufactured in accordance with SAE AMS-QQ-A-250/5C and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23. The plate is designated as a critical application item, and only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid; any deviation from this requirement must be explicitly declared and may result in disqualification. Compliance with the QSL program is mandatory, and failure to meet its terms constitutes an unauthorized substitution with potential criminal penalties. Every shipment must include a Certificate of Quality Compliance, with continuous marking on each unit containing the contract number, NSN, specification revision, alloy, temper, manufacturer details, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material. Plates must be supplied in whole foot lengths only and packaged per MIL-STD-2073-1E and ASTM B660 with preservation code ZZ, and marked in compliance with MIL-STD-129R. The delivery requirement is for two pieces, with a delivery deadline of 167 days from award, FOB origin, and inspection and acceptance at destination. The procurement is a total small business set-aside under NAICS code 331491, managed by DLA Troop Support, with all technical, quality, and packaging controls governed by DLA directives and referenced documents.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

SHIM STOCK, LAMINATE

Solicitation # SPE8E9-26-T-3375

This contract specifies the procurement of laminated shim stock made from aluminum alloy with a thickness of 0.250 inches, a width of 24 inches, and a length of 48 inches, to be supplied in whole-foot increments only. The material must conform to technical standards including SAE AMS-DTL-22499B, ASTM B666/B666M-20, and ASTM B660-23, and requires continuous identification marking per Fed-Std-184 that includes the DLA contract order number, NSN, specification number and revision, alloy, grade, class, type, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stamping or stenciling using waterproof, non-contaminating fluids and must remain legible and stable under normal handling; adhesive labels are permitted for bars, tubes, and shapes under 0.250 inches nominal OD, while tags are acceptable for wire. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly declared. Compliance with the QSL program waives certain government inspection requirements such as COQC, PVT, QAP-EQ003, and ASQ H1331. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 with preservation methods following ASTM B660, and palletization must follow DLA packaging requirements. The shipment is to be delivered FOB origin in 153 days to Robins AFB, Georgia, with no variance allowed in quantity. The material is marked as a critical application item, and failure to meet any requirement, particularly regarding supplier qualification or marking, may result in rejection of the product and potential criminal penalties for unauthorized substitution.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

BEAM, STRUCTURAL

Solicitation # SPE8E4-26-T-2022

The contract specifies the procurement of a structural beam made from titanium alloy, classified as AB-1 annealed per MIL-T-81556, with precise dimensional requirements of 2.840 inches in height, 4.900 inches in width, and 0.100 inches in thickness, supplied in 12-foot lengths in whole-foot increments only. Each unit must be fully identified with mandatory markings including the DLA contract delivery order number, NSN, specification revision, alloy grade and temper, manufacturer's name, heat and lot number, and dimensions, using stamping or stenciling methods that are legible, waterproof, and non-contaminating. Adhesive labels are required for small bars, tubes, and shapes under 0.250 inches in nominal outer diameter. A Certificate of Quality Compliance, including mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking in compliance with MIL-STD-129 and no special marking codes applied. The NSN is 9540-01-428-5985, with a quantity of 17 linear feet, a delivery window of 20 days, and delivery terms FOB origin. The contract includes a 10% positive quantity variance with no tolerance for reduction. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement must be explicitly declared by the offeror. Products not supplied by approved QSLD distributors are considered unauthorized substitutions and may trigger criminal penalties. Source inspection requirements are waived for qualified QSLD suppliers, and quality conformance inspections referenced in RQ006, COQC, PVT, QAP-EQ003, and ASQ H1331 do not apply. The technical data package referenced is Revision A Gen 1, aligned with MIL-T-81556A, and all CDRLs including metal certification are mandatory. The solicitation is a total small business set-aside under NAICS code 331491, issued by the Defense Logistics Agency with a response deadline of August 17, 2026. All provisions incorporate the DLA Master List of Technical and Quality Requirements, and compliance with procurement note M03 regarding Q

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3392

A 2.500 inch thick, 48 inch wide, 144 inch long aluminum alloy plate made from alloy 7075 in temper T7351 is being procured under solicitation SPE8E9-26-T-3392, with a total quantity of nine pieces, each weighing 1745.280 pounds per piece. The material must strictly adhere to the exact dimensions specified, with no test coupons permitted, and must be supplied in whole foot lengths only. All units must be continuously marked with the DLA contract delivery order number, NSN, specification revision, alloy grade and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stamping or stenciling; adhesive labels are required for smaller bars and tubes under 0.250 inch nominal OD. A Certificate of Quality Compliance, or mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. The product must originate from a supplier listed on the Qualified Suppliers List for Distributors (QSLD); any deviation from this requirement constitutes an unauthorized substitution and may result in criminal penalties. References to source inspection and certain quality conformance tests are waived for qualified suppliers under the QSL program. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, specifically Level A of ASTM B660, with marking per MIL-STD-129R and special preservation code ZZ. Shipment must be palletized accordingly and delivered FOB origin to Tinker AFB, Oklahoma, with delivery required within 153 days of contract award, and no variance in quantity is permitted. The procurement is governed by multiple technical standards including SAE AMS4078, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R, and all data requirements are subject to the DLA Master List of Technical and Quality Requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3293

This procurement specifies a metal plate made of aluminum alloy 6061 in T651 temper, measuring 0.500 inches thick by 36 inches wide by 96 inches long, with a reference weight of 169.34 pounds per piece. The material must strictly conform to exact dimensions without allowances for test coupons and must be supplied in whole-foot lengths only. A Certificate of Quality Compliance, also known as mill-material certification, is mandatory and must accompany every shipment to the customer or DLA depot, with a copy forwarded to the DLA Troop Support Contracting Officer. Continuous marking is required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy grade and temper, manufacturer’s name, heat and lot numbers, and dimensions. Markings must be applied via stamping or stenciling, be legible to the unaided eye, waterproof, and stable under normal handling; adhesive labels are permitted for small bars, tubes, and shapes under 0.250 inches in nominal diameter. The material must comply with multiple technical standards including SAE AMS4027P Revision P, ASTM B666/B666M-20, and ASTM B660-23, and the Technical Data Package Rev B Gen 2 referenced in the contract. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM B660, with marking following MIL-STD-129 and additional requirements specified in the purchase order text. Delivery is FOB origin, with a requirement for 37 pieces to be delivered within 167 days to the DLA San Joaquin distribution center in Tracy, California. Acceptance and inspection occur at destination, with zero variance allowed in quantity. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid; any deviation must be explicitly declared, and non-compliance may result in rejection, penalties, or criminal liability. The solicitation waives source inspection requirements for approved QSLD suppliers, and all documentation, including CDRL-METALSCERT, must align with DLA’s Master List of Technical and Quality Requirements. The NSN is 9535-00-231-8236, the purchase request number is 7017757254, and the contract is designated a critical application item.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

LABOR - CONSTRUCTION AT DSCR

Solicitation # SP4703-26-Q-0065

This contract, issued by the Defense Logistics Agency Aviation under solicitation number SP4703-26-Q-0065, is a total small business set-aside for labor services related to the turnkey installation of an automatic lawn irrigation system at Buildings 46 and 47 of the Defense Supply Center Richmond in Virginia. The scope encompasses installing a fully operational underground irrigation network covering approximately 95,000 square feet, including all necessary equipment such as Schedule 80 PVC piping, fittings, gear-driven rotary sprinkler heads, controllers, backflow preventers, pressure reducing valves, and associated wiring. The contractor is required to furnish as-built drawings detailing all system components and adhere to stringent standards including UFC, IBC, IPC, NEC, NFPA codes, OSHA regulations, and manufacturer specifications. All work must align with the U.S. Army Corps of Engineers' three-phase inspection process involving preparatory, initial, and daily follow-up inspections, with a Quality Control System Manager mandated to be onsite during all active work. Submission of a site-specific Occupational Safety and Health Plan approved by DLA is mandatory before work commences, and all personnel must possess a favorable NACI clearance or equivalent and comply with strict facility access and dress code requirements. The contract mandates submission of preconstruction submittals including certificates of insurance, surety bonds, a comprehensive project narrative, a list of definable features of work, a detailed timeline, and documentation of at least five similar projects completed within the last five years. Payment is capped at 80% of the contract value until final inspection and acceptance are achieved. The period of performance runs from September 30, 2026, to January 29, 2027, with work required to conclude within 90 days of notice to proceed. Prevailing wage rates under 29 CFR 5.5(a)(1)(iii) apply, and the entire project must comply with environmental regulations including ISO 14001 and Section 106 of the National Historic Preservation Act. Proposals are evaluated solely on technical acceptability, with failure to submit any required documentation resulting in immediate rejection.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Packaging, Labeling, and Logistics for Military ShipmentThe contract requires the packaging, preservation, and labeling of headset assemblies in strict compliance with military standards, particularly MIL-STD-129, to ensure uniformity and readiness for defense logistics. All items must be properly preserved against environmental damage and clearly labeled with the required barcodes, data elements, and tracking information as mandated by federal military specifications. Shipping is to be conducted under FOB Destination terms, meaning the contractor assumes full responsibility for the condition and delivery of the goods until they reach the designated destination, with mandatory delivery confirmation required upon receipt. This is a Small Business Set Aside subcontract under NAICS code 493190, exclusively available to small businesses, and is managed by the Defense Logistics Agency Aviation under the Department of Defense. The opportunity was posted on August 7, 2026, with a firm response deadline of August 24, 2026, at 7:00 PM. While specific location details for performance or point of contact are not provided in the data, the work is tied to military supply chain requirements and must be executed to support defense readiness priorities. Participation is restricted to eligible small businesses through the SBA’s certification program.

Other Warehousing and Storage

POSTED

DEADLINE

Quality Assurance and Factory Acceptance Testing (FAT) ServicesThe contract requires comprehensive Quality Assurance and Factory Acceptance Testing services to verify that equipment meets military or original equipment manufacturer specifications through rigorous environmental, audio, and electrical performance evaluations. Execution of the Factory Acceptance Testing must be fully documented to ensure compliance with all applicable standards, with results subject to rigorous review and approval. The work is scoped as a subcontract under a Small Business Set Aside designation, specifically reserved for small businesses, and is classified under NAICS Code 541330 for professional, scientific, and technical services related to testing and inspection. All testing activities must be completed in alignment with defense requirements and delivered to the Department of Defense through DLA Aviation by the specified deadline of August 24, 2026. The solicitation was posted on August 7, 2026, and response submissions are due by 7:00 PM Eastern Time on the closing date.

Engineering Services

POSTED

DEADLINE

Precision Component and Connector SupplyThe contract titled Precision Component and Connector Supply is a Defense Logistics Agency Aviation subcontract under a Small Business Set Aside, exclusively reserved for small businesses, with a NAICS code of 334418 indicating classification under Other Electronic Component Manufacturing. It requires the supply of specialized connectors, microphones, earcup components, or wiring harnesses integral to the assembly of military-grade headsets, with strict adherence to defense standards requiring full traceability of components and compliance with applicable military specifications. All delivered items must meet rigorous quality and documentation protocols to ensure suitability for critical defense applications. The solicitation is open with a response deadline of August 24, 2026, at 7:00 PM, and was posted on August 7, 2026, with no designated place of performance or point of contact details provided. The contract is managed by the Department of Defense through DLA Aviation, emphasizing the critical nature of the components in supporting military communication systems. Bidders must be certified small businesses capable of fulfilling the technical, compliance, and supply chain demands of defense procurement, with an expectation of secure handling, documentation, and delivery of parts that meet exacting performance and accountability requirements.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Electronics Assembly and Headset ManufacturingThe contract involves the full-scale manufacturing of a military-grade headset assembly, requiring precise integration of audio components, wiring, connectors, and housing to fully comply with National Stock Number and Part Number specifications. All components must meet stringent defense standards for durability, performance, and reliability in operational environments. The work is classified as a subcontract under a Small Business Set Aside, exclusively reserved for small businesses as defined by the SBA, with the North American Industry Classification System code 334310 indicating electronic manufacturing services. Performance of the contract is under the authority of the Department of Defense through DLA Aviation, though specific location details for performance or contact information are not provided. Bids must be submitted no later than August 24, 2026, with the opportunity posted on August 7, 2026, offering a 17-day window for response.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Quality Assurance and Conformance TestingThis contract pertains to independent testing services required to verify that absorbent pads meet established commercial standards for absorbency, durability, and structural integrity before they can be accepted by the government. The testing must ensure that the products consistently perform under expected conditions and comply with technical specifications critical to government operational needs. The work is intended to serve as a final quality assurance step to confirm conformance prior to official acceptance, reducing risk and ensuring reliability of the materials used in government applications. The contract is classified as a subcontract under a Small Business Set Aside, fully reserved for small businesses as defined by the SBA, with the NAICS code 541380 indicating it falls under other scientific and technical consulting services. It is issued by the Defense Logistics Agency Aviation on behalf of the Department of Defense, with a solicitation window opening on August 7, 2026, and responses due by August 24, 2026. Performance location details are unspecified, but the testing must align with federal requirements and standards. All qualified small businesses must submit proposals by the deadline to compete for this opportunity.

Testing Laboratories and Services

POSTED

DEADLINE

Logistics and Freight Transportation ServicesThe contract pertains to the logistics and freight transportation of absorbent pads from the manufacturer to government-designated locations, with strict adherence to a 170 Days After Request Order delivery schedule. The work is classified as a subcontract under a Small Business Set Aside, ensuring eligibility and preference for small businesses as defined by the SBA. The North American Industry Classification System code 484220 indicates the scope involves truck transportation for local and regional freight, aligning with the required ground-based distribution network. The solicitation is managed by the Defense Logistics Agency Aviation, part of the Department of Defense, and is open for responses until August 24, 2026, with an initial posting date of August 7, 2026. Performance of the contract will occur at government-specified destinations without defined geographic constraints listed, emphasizing the need for flexible routing and reliable delivery timelines to meet operational requirements.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Packaging and Labeling of Absorbent PadsThe contract pertains to the commercial packaging and labeling of finished absorbent pads in a transport-ready configuration to comply with the Defense Logistics Agency Aviation’s FOB Destination delivery standards. The work involves ensuring the products are properly sealed, labeled, and prepared for shipping in accordance with military logistics requirements, with an emphasis on readiness for transportation and receipt at the designated destination. This is a subcontract opportunity set aside exclusively for small businesses under the SBA’s Small Business Set Aside program, classified under NAICS code 326111, which corresponds to plastic product manufacturing. The solicitation was posted on August 7, 2026, with a firm response deadline of August 24, 2026, at 7:00 PM Eastern Time. The contracting activity is managed by the Department of Defense through DLA Aviation, and performance is expected to fulfill delivery obligations under FOB Destination terms, meaning the contractor assumes responsibility for all costs and risks until the goods arrive at the specified delivery point. No specific place of performance or point of contact is provided in the available data, and the contract details can be accessed via the SAM.gov portal using the provided link.

Plastics Bag and Pouch Manufacturing

POSTED

DEADLINE

Absorbent Material Raw Supply (Polypropylene, Sorbent Fibers)The contract is a Small Business Set Aside under NAICS code 313230, issued by the Department of Defense through DLA Aviation, for the supply of raw materials including polypropylene fibers, synthetic sorbents, and non-woven fabrics essential for manufacturing absorbent pads to meet an annual demand of 973 kilotons. It is structured as a subcontract and is exclusively available to small businesses, ensuring eligibility and participation by qualifying small enterprises in fulfilling the ongoing production requirements. The materials are critical to maintaining continuous manufacturing operations and must be delivered to support steady supply chain function without interruption. The solicitation was posted on August 7, 2026, with a response deadline of August 24, 2026, requiring interested bidders to submit proposals within this window. The place of performance and specific office address details are not provided, indicating that delivery logistics may be coordinated based on the contractor’s operational capabilities. The contract’s purpose centers on securing a reliable, scalable source of specialized raw materials, emphasizing consistency in quality and volume to meet the Defense Logistics Agency’s substantial and sustained demand. Bidders must demonstrate capacity, compliance, and the ability to sustain production at scale under the terms outlined in the solicitation.

Nonwoven Fabric Mills

POSTED

DEADLINE

Manufacture of Hazardous Material Absorbent PadsThe contract is for the full-scale production of commercial off-the-shelf absorbent pads designed to manage hazardous materials, requiring adherence to established commercial performance standards for absorbency and containment. It is a subcontract under a Small Business Set Aside, specifically designated as a total set-aside for small businesses, and falls under NAICS code 325998 for other chemical product and preparation manufacturing. The opportunity is posted by the Defense Logistics Agency Aviation on behalf of the Department of Defense, with a response deadline of August 24, 2026, and was made available for bidding on August 7, 2026. Production must align with routine commercial specifications without requiring custom or government-unique formulations, ensuring scalability and cost-effectiveness for widespread deployment. Place of performance and point of contact details are not specified, but the work is intended to support Department of Defense operational needs through reliable, standardized absorbent solutions.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A526Q0676

The contract is a Small Business Set Aside solicitation for 50 gaskets with NSN 5330013784252, to be delivered to USS WAYNE E MEYER DDG 108 within 123 days of award. The approved source for this item is designated as 03538 1210B3238-1, and only responsible suppliers may submit quotes, which must be received electronically by the deadline. The solicitation, identified by number SPE4A5026Q0676, was posted on August 7, 2026, with responses due by August 11, 2026. No physical copies or technical documentation such as specifications, plans, or drawings are available; all information must be obtained through the provided online portal. The procurement is managed by the Defense Logistics Agency Aviation under the Department of Defense, with the contracting office located in Richmond, Virginia. All inquiries must be directed via email to the designated point of contact, as no other communication channels are authorized.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A7-26-R-0743

The Defense Logistics Agency Aviation is conducting market research under Sources Sought Notice 26R0743 to identify capable vendors for the new manufacture of four CANOPY, FIXED units identified by NSN 1560-01-654-1325 and part number M102-10X1000-11. This is not a formal solicitation, and no contract award is being sought at this time; instead, the government is gathering information to assess industry capacity, technical capability, and willingness to perform under a potential performance-based service acquisition contract. Respondents are expected to demonstrate their ability to manage the full lifecycle of production including procurement of component parts, inspection, testing, preservation, packaging, and shipping, while also showing capacity for supply chain management, logistics planning, forecasting, and addressing diminishing manufacturing sources. Key evaluation criteria for market responses include scope and scale alignment, application of financial and technical resources, project management effectiveness with emphasis on schedule compliance, cost containment, performance tracking, personnel retention, and risk mitigation. The government is considering whether to set aside the eventual procurement for small businesses or pursue full and open competition, with the possibility of multiple awards, based on the responses received. All submissions must be sent via email to Michelle R Scott by August 11, 2026, and must include organizational details, ownership size and type, and tailored capability statements that validate technical and operational readiness. No drawings, technical orders, or qualification requirements are available, and no formal pricing, delivery schedule, or contract clauses have been established. Participation is voluntary, with no reimbursement for costs incurred in responding.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE