Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHEET, METAL

Active
SPE8E9-26-T-3307Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This procurement requires aluminum alloy sheet metal with specific dimensions of 0.012 inches thick, 48 inches wide, and 144 inches long, weighing approximately 8.304 pounds per sheet, and must be supplied in whole-foot lengths only. All material must comply with exact specifications and严禁 test coupons; non-conforming sheets will be rejected. A Certificate of Quality Compliance, or Mill-Material Certification, is mandatory for every shipment and must be included with the delivery and submitted separately to the DLA Troop Support Contracting Officer. The material must meet the technical standards referenced in the Technical Data Package, including SAE AMS-QQ-A-250B, ASTM B666/B666M-20, and ASTM B660-23, and must be of Alloy 7075 in T6 temper. Continuous identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, permanent, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches nominal OD. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation, and any deviation from this requirement must be explicitly stated by the offeror. Suppliers on the QSLD are exempt from source inspection unless otherwise specified, and compliance with the QSL program is strictly enforced—failure to comply may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, including robust four-corner protection, full edge coverage, and fiberboard or superior top and bottom protection. Marking must follow MIL-STD-129, with special codes ZZ indicating preservation in accordance with ASTM B660 and marking per ASTM B666. The delivery is FOB origin, with inspection and acceptance occurring at destination, and the entire order of 98 sheets must be delivered within 167 days to Warner Robins Air Force Base, Georgia. Failure to meet any requirement, including marking, packaging, or supplier qualification, will result in rejection of the product.

General Info

Aluminum alloy 7075-T6 sheets, 0.012x48x144 inches, QSLD-only, certified, marked, packed per MIL-STD, FOB origin, 98 sheets in 167 days.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

SPE8E9-26-T-3307.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHEET,METAL
METAL SHEET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ALUMINUM ALLOY
0.012 IN THK 48 IN W 144 IN LG
8.304 LB/SH (REFERENCE)
No sheets will be accepted unless they conform to exact dimensions per the item description: Test coupons are not allowed.
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
AWARDS OF THIS NSN MUST BE SOURCE INSPECTED
UNLESS AWARDED TO A QSLM/QSLD SUPPLIER THAT
IS LISTED ON THE APPLICABLE QSL LIST AND
SUPPLYING MATERIAL THAT IS IN COMPLIANCE
WITH THE QSL PROGRAM.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
SPE8E9-26-T-3307
SECTION B
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
CRITICAL APPLICATION ITEM
SPE8E9-26-T-3307
SECTION B
TDP Rev A Gen 1 IAW BASIC NON GOVT STD AN149051THRUAN149150 REV 3(1) NOT 2SAE A REVISION NR A DTD 12/01/2013 PART PIECE NUMBER: ALLOY 7075 TMPR T6
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14153 01735 REVISION NR A DTD 05/09/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS-QQ-A-250B REVISION NR B DTD 06/12/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B666/B666M-20 REVISION NR M DTD 11/01/2020 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B660-23 REVISION NR DTD 11/01/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017758061 0001 SH 98.000
NSN/MATERIAL:9535006106927
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:00 OPI:A
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE8E9-26-T-3307
SECTION B
PR: 7017758061 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
WHEN PREP FOR DELIVERY REQUIREMENTS SPECIFY CODE ZZ, PACKAGING SHALL BE
IN ACCORDANCE WITH LEVEL A REQUIREMENTS OF ASTM B660 AND DISC DRAWING
NUMBER 01735 PRESERVATION ZZ = IAW ASTM B660 MARKING Z = IAW ASTM B666
AND ADDITIONAL REQUIREMENTS STATED IN THE PURCHASE ORDER TEXT(POT).
UNIT OR INTERMEDIATE UNIT CONTAINER PACKAGING REQUIRES:
ROBUST FOUR CORNER MATERIAL PROTECTION
FULL COVERAGE MATERIAL SIDE EDGE PROTECTION
FIBERBOARD OR BETTER TOP AND BOTTOM FULL COVERAGE MATERIAL PROTECTION
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:02/01/2027 Original Required Delivery Date:01/23/2027
SPE8E9-26-T-3307 NSN/Part Number: 9535-00-610-6927 Quantity: 98 SH Purchase Request: 7017758061QTY: 98 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1954
The contract specifies the procurement of aluminum alloy plate measuring 0.250 inches thick, 48.00 inches wide, and 144.00 inches long, manufactured to SAE AMS-QQ-A-250/8C revision C and other referenced technical standards including ASTM B666/B666M-20 and ASTM B660-23, with a temper of H32 and alloy designation of 5052. The material must be supplied in whole-foot lengths only and conform strictly to the dimensional requirements without exception or allowance for test coupons. Continuous marking is mandatory on every unit, including the DLA contract delivery order number, NSN, specification number and revision, alloy grade and temper, manufacturer’s name, heat and lot number, and exact dimensions, using stamping or stenciling methods that are legible, waterproof, and non-contaminating; adhesive labels are permitted for thin bars and tubes. A Certificate of Quality Compliance must accompany each shipment and be forwarded to the contracting officer, and all packaging must adhere to MIL-STD-2073-1E and ASTM B660 Level A requirements with preservation code ZZ and marking code Z as specified. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from this requirement must be explicitly declared; non-compliant bids are subject to rejection and potential criminal penalties for unauthorized substitutions. Government inspection requirements such as COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006 are waived for QSLD-compliant suppliers, except in Foreign Military Sales cases. The material must be delivered FOB origin, within a 167-day window from the award, with zero tolerance for quantity variance. Packaging and marking must fully comply with MIL-STD-129R, and shipments are to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE8E4-26-T-1954, with a response deadline of August 17, 2026, and a required delivery date of November 27, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and supplemental documents such as the Technical Data Package and CDRLs must be reviewed for full compliance.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1942
This contract specifies the procurement of a metal plate made from aluminum alloy Alclad, measuring 0.313 inches thick, 36.00 inches wide, and 96.00 inches long, with a reference weight of 108.24 pounds per piece. The material must strictly conform to the technical requirements outlined in the DLA Master List of Technical and Quality Requirements and be manufactured in accordance with SAE AMS-QQ-A-250/5C and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23. The plate is designated as a critical application item, and only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid; any deviation from this requirement must be explicitly declared and may result in disqualification. Compliance with the QSL program is mandatory, and failure to meet its terms constitutes an unauthorized substitution with potential criminal penalties. Every shipment must include a Certificate of Quality Compliance, with continuous marking on each unit containing the contract number, NSN, specification revision, alloy, temper, manufacturer details, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material. Plates must be supplied in whole foot lengths only and packaged per MIL-STD-2073-1E and ASTM B660 with preservation code ZZ, and marked in compliance with MIL-STD-129R. The delivery requirement is for two pieces, with a delivery deadline of 167 days from award, FOB origin, and inspection and acceptance at destination. The procurement is a total small business set-aside under NAICS code 331491, managed by DLA Troop Support, with all technical, quality, and packaging controls governed by DLA directives and referenced documents.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E9-26-T-3293
This procurement specifies a metal plate made of aluminum alloy 6061 in T651 temper, measuring 0.500 inches thick by 36 inches wide by 96 inches long, with a reference weight of 169.34 pounds per piece. The material must strictly conform to exact dimensions without allowances for test coupons and must be supplied in whole-foot lengths only. A Certificate of Quality Compliance, also known as mill-material certification, is mandatory and must accompany every shipment to the customer or DLA depot, with a copy forwarded to the DLA Troop Support Contracting Officer. Continuous marking is required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy grade and temper, manufacturer’s name, heat and lot numbers, and dimensions. Markings must be applied via stamping or stenciling, be legible to the unaided eye, waterproof, and stable under normal handling; adhesive labels are permitted for small bars, tubes, and shapes under 0.250 inches in nominal diameter. The material must comply with multiple technical standards including SAE AMS4027P Revision P, ASTM B666/B666M-20, and ASTM B660-23, and the Technical Data Package Rev B Gen 2 referenced in the contract. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM B660, with marking following MIL-STD-129 and additional requirements specified in the purchase order text. Delivery is FOB origin, with a requirement for 37 pieces to be delivered within 167 days to the DLA San Joaquin distribution center in Tracy, California. Acceptance and inspection occur at destination, with zero variance allowed in quantity. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid; any deviation must be explicitly declared, and non-compliance may result in rejection, penalties, or criminal liability. The solicitation waives source inspection requirements for approved QSLD suppliers, and all documentation, including CDRL-METALSCERT, must align with DLA’s Master List of Technical and Quality Requirements. The NSN is 9535-00-231-8236, the purchase request number is 7017757254, and the contract is designated a critical application item.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1953
The contract specifies the procurement of aluminum alloy metal plates measuring 0.500 inches thick, 36.00 inches wide, and 96.00 inches long, with a reference weight of 167.616 pounds per piece, totaling six units. The material must conform to SAE AMS-QQ-A-250/8C Revision D and other referenced standards including ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R, with a specified alloy of 5052 in H32 temper. Full compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory, and only suppliers listed on the QSLD are eligible for award; any deviation must be explicitly declared and may result in rejection. The material must be supplied in whole-foot increments and bear continuous identification markings on each unit including the contract number, NSN, specification revision, alloy grade, manufacturer details, heat and lot numbers, and dimensions, applied via stamping or stenciling that is legible, waterproof, and non-contaminating. Certificates of Quality Compliance, including mill material certifications, must accompany each shipment and be forwarded to the contracting officer. Packaging must adhere to MIL-STD-2073-1E and ASTM B660 Level A requirements with preservation and marking codes ZZ and Z as specified, and palletization must follow DLA packaging guidelines. All items are to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with a delivery deadline of 167 days from the contract award, no quantity variance permitted, and inspection and acceptance points at destination. Failure to meet any requirement, including marking or QSLD compliance, may result in rejection of the product and potential criminal penalties.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1958
This contract specifies the procurement of two metal plates made from high magnesium aluminum alloy, each measuring 0.750 inches thick, 60.00 inches wide, and 240.00 inches long, with a nominal weight of 1,036.8 pounds per piece. The material must conform to the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including compliance with ASTM B928/B928M-15, MIL-STD-129R, ASTM B666/B666M-20, and ASTM B660-23 standards, as referenced in the Technical Data Package. The alloy is designated as 5086 in temper H116 and must be supplied in whole-foot lengths only, with strict dimensional tolerances enforced—no test coupons or deviations from exact specifications are permitted. Continuous identification markings are required on every unit, including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot numbers, and dimensions, using approved methods such as stenciling or stamping that ensure legibility and durability without contaminating the material. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any offer not based on an approved QSLD distributor must explicitly state the deviation, as noncompliance may result in rejection or criminal penalties. Government inspection requirements are waived for approved QSLD suppliers, with certification of quality compliance via mill material certification mandatory with each shipment and forwarded to the contracting officer. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, with preservation and marking codes strictly enforced. All shipments must be palletized according to DLA packaging guidelines, labeled with full unit quantities in dual units if applicable, and delivered FOB origin to the specified DLA distribution facility in New Cumberland, Pennsylvania, no later than 167 days after the award. The required delivery date is December 4, 2026, with a need ship date of February 1, 2027, and the order is subject to zero variance in quantity.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1945
This contract specifies the procurement of aluminum alloy alclad sheet metal with precise technical parameters: 0.071 inches thick, 36 inches wide, and 72 inches long, with a 0.001 inch thick alclad coating on both sides, weighing approximately 18.40 pounds per sheet. The material must conform to SAE AMS-QQ-A-250/5C and ASTM standards, with a 2024-T3 temper, and must be supplied in whole foot lengths only. All units require continuous identification markings including the DLA contract number, NSN, specification revision, alloy, temper, manufacturer details, heat and lot numbers, and dimensions, applied via stamping or stenciling that is legible, waterproof, and non-contaminating. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Contracting Officer. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award; non-compliant bids are considered exceptions and subject to rejection. The product is designated as a critical application item, requiring strict adherence to packaging guidelines under MIL-STD-2073-1E and ASTM B660 for preservation and marking, with special code ZZ applied. Palletization must follow DLA packaging requirements, and shipment markings must reflect dual units where applicable. Deliveries are to be made FOB origin to two designated DLA distribution depots with exact quantity tolerance of plus or minus zero percent and inspection and acceptance occurring at destination. The contract demands strict compliance with quality conformance requirements, waived for QSL-compliant suppliers, and explicitly prohibits test coupons. Failure to meet any specification, including dimensional tolerances or marking protocols, constitutes grounds for rejection and may incur civil or criminal penalties.
DEPOT OKLAHOMA

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L3-26-T-147W
The contract pertains to the procurement of five units of a housing, mechanical drive component with NSN/Part Number 0001S00000052 under solicitation SPE7L3-26-T-147W, issued by the Department of Defense through the Defense LogisticsAgency. Delivery is required within 359 days after award, with inspection and acceptance taking place at the supplier’s origin. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract includes stringent export control provisions under ITAR or EAR, restricting all handling, disclosure, and transfer of technical data to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Only contractors with approved U.S./Canada Joint Certification Program status, completed DLA export control training, and authorized access may handle the controlled data. Cybersecurity requirements include CMMC Level 2 certification by a third-party assessment organization, and the solicitation is open to full and open competition. The designated place of performance is in Tracy, California, 95304-5000, with Karen McCarley as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-614K
The contract pertains to the procurement of a single unit of DUCT ASSEMBLY,AIR C with NSN/Part Number 0001S00000052, under solicitation SPE4A7-26-T-614K, with a delivery requirement of 260 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access via the DLA questionnaire are permitted to receive or work with this information. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance scheduled for Key West, Florida, 33040-9059, and the primary point of contact is Georgina Vass at georgina.vass@dla.mil. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under a federal contracting mechanism with NAICS code 331491.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 331491
New
Federal
ANODE,CORROSION PRE
Solicitation # 70Z08526Q30099B00
The contract is for an anode used in corrosion prevention and is solicited under number 70Z08526Q30099B00 by the Department of Homeland Security through the Sflc Procurement Branch 2. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, at 4:00 PM Eastern Time. There is no set-aside designation applied to this procurement, meaning it is open to all eligible contractors without restriction based on business size or category. The North American Industry Classification System code is 331491, indicating the product falls under other fabricated metal product manufacturing. The office responsible is located in Alameda, California, with a ZIP code of 94501, and the point of contact for primary inquiries is Stephanie Garity, reachable at 410-762-6496 or stephanie.a.garity@uscg.mil, with Chad Ball as the secondary contact at 571-607-2534 or chad.a.ball@uscg.mil. The place of performance has not been specified in the provided data, and interested parties must access the full solicitation details through the SAM.gov portal link provided.
Sflc Procurement Branch 2(00085)

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 331491
New
DIBBS
ARMOR PLATE
Solicitation # SPE8E4-26-T-1925
The contract requires the procurement of aluminum alloy armor plate meeting precise specifications: 1.250 inches thick, 48.00 inches wide, 144.00 inches long, weighing approximately 829.44 pounds per piece, and produced from Alloy 5083. The material must undergo ballistic testing in accordance with MIL-DTL-46027N and conform to all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including the Qualified Suppliers List for Distributors (QSLD) mandate, which restricts award eligibility solely to suppliers listed on the QSLD. Non-compliance with this requirement constitutes an exception and may result in disqualification or criminal penalties if unauthorized substitution occurs. A Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are required on each unit, including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer details, heat and lot numbers, and dimensions, applied via stamping or stenciling — not die stamping — and must be legible, durable, and waterproof. For items under 0.250 inches nominal OD, adhesive labels are required; for wire, tags are acceptable. Dual-unit shipments must display both quantities on markings. Packaging must adhere to MIL-STD-2073-1E, with preservation per ASTM B660, and marking per MIL-STD-129R, including UCC-128/GS1-128 barcoding where applicable. Palletization follows DLA’s RP001 packaging requirements. Delivery is FOB origin to the DDSP New Cumberland Facility in Pennsylvania, with an original required delivery date of January 15, 2027, and a need ship date of January 18, 2027, within 167 days after award. The contract mandates compliance with cybersecurity requirements including CMMC Level 2 self-assessment, safeguarding covered defense information under DFARS 252.204-7012, and NIST SP 800-171 implementation. The prohibition on acquiring covered defense telecommunications equipment applies, and sea transport must occur via U.S.-flag vessels unless waived. Invoicing is exclusively through Wide Area WorkFlow (WAWF), and suppliers must be registered in SAM
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in about 22 hours
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3205
The contract is for the procurement of 476 sheets of aluminum alloy, specifically grade 5052 temper H32, with precise dimensions of 0.063 inches thick, 48 inches wide, and 96 inches long, weighing approximately 28.16 pounds per sheet. All material must conform exactly to the specified dimensions without the use of test coupons, and must be supplied in whole-foot lengths only. The product must satisfy technical requirements referenced in the DLA Master List of Technical and Quality Requirements and must be certified under the Qualified Suppliers List for Distributors (QSLD), meaning only suppliers listed in the QSLD as of June 1994 are eligible to bid or deliver. Any deviation from the QSLD requirement must be explicitly declared by the offeror, and failure to comply may result in criminal penalties for unauthorized substitution. Each unit must be continuously marked with the DLA contract delivery order number, NSN, specification number and revision, alloy, grade, class, type, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions using either stamping (excluding die stamp) or stenciling; markings must be legible, waterproof, stable under normal handling, and applied with non-contaminating fluid. Packaging must follow MIL-STD-2073-1E and Level A requirements of ASTM B660, with preservation method ZZ, and palletization must adhere to DLA packaging standards. Marking for shipment must comply strictly with MIL-STD-129, including the use of special marking code ZZ and inclusion of both units of measure when applicable. A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment and must be provided to the customer or DLA depot and forwarded to the Contracting Officer. Inspection and acceptance occur at the destination point, governed by FAR 52.246-2, with no supplier inspection waived except under the QSL program. Delivery is required within 17 days after receipt of order, FOB origin, to the designated DLA distribution facility in New Cumberland, Pennsylvania, with a need ship date of August 21, 2026, and an original required delivery date of December 7, 2026. Invoicing must be submitted electronically via WAWF, and all compliance with DFARS clauses regarding cybersecurity, hazardous materials, trafficking in persons, employment verification, and export control are mandatory
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in about 22 hours
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E9-26-T-3212
The contract is for the procurement of aluminum alloy metal plate, specifically 0.375 inches thick, 36 inches wide, and 96 inches long, with a reference weight of 126.96 pounds per piece, compliant with SAE AMS4027P Revision P and ASTM B666/B666M-20, identified by NSN 9535-00-495-7813 and alloy grade 6061-T651. Delivery is required within 55 days of order placement, with an original required delivery date of November 15, 2026, and a need ship date of July 13, 2026, to be delivered FOB origin to the DLA Distribution San Joaquin facility in Tracy, California. A minimum quantity of 33 pieces is specified with zero variance allowed, and all plates must be supplied in whole-foot increments with no test coupons permitted. Each unit must be continuously marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, part and die numbers, temper, manufacturer’s name, heat and lot number, and dimensions using only stamping or stenciling methods that are legible, waterproof, stable under normal handling, and non-contaminating. Adhesive labels are required for bars, tubes, and shapes under 0.250 inches nominal OD, while tags are acceptable for wires. Packaging must conform to MIL-STD-2073-1E and Level A requirements of ASTM B660-23, including robust four-corner and side-edge protection with full coverage top and bottom fiberboard or better, and palletization per RP001. Marking must also comply with MIL-STD-129, and preservation uses code ZZ per ASTM B660. A Certificate of Quality Compliance (Mill-Material Certification) is mandatory with every shipment, and a copy must be forwarded to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible, and any deviation from this requirement must be explicitly declared, with non-compliance treated as an unauthorized substitution that may incur criminal penalties. The offeror must be a small business as defined under NAICS 331491 with valid socioeconomic certifications, and the contract incorporates numerous DFARS and FAR clauses regarding cybersecurity, hazardous materials
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in about 22 hours
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 332420
New
DIBBS
Small Business Subcontracting Participation
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 483110
New
DIBBS
Transportation of Supplies by Sea

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332420
New
DIBBS
Fire Extinguisher Supply (NSN 4210-00-203-0217)
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339113
New
DIBBS
CARRIER ASSEMBLY
Solicitation # SPE8E9-26-Q-0643
The contract awards 202 units of the Carrier Assembly, Protective Mask, identified by NSN 4240-01-224-4196, under solicitation SPE8E9-26-Q-0643, with a firm fixed price and no variance allowed in quantity. Delivery is required within 60 days after contract award, with freight shipped from origin and acceptance occurring at destination. Packaging must comply strictly with MIL-STD-2073-1E and DLA Packaging Requirements, using specified methods for preservation, wrapping, and containment, while avoiding plastic materials whenever possible. Marking must adhere to MIL-STD-129 with no special coding required. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional components like batteries or sensors, and any exempted items must meet NavSea 5100-003D standards for shock resistance and secondary containment. The item is destined for DLA Distribution at the New Cumberland facility, with transportation governed by DLAD procedural notes. The supply is critical to a Department of Defense requirement with a material need date of May 19, 2028, and technical and quality standards referenced from the DLA Master List of Requirements in effect on the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314994
New
DIBBS
MARLINE
Solicitation # SPE8E9-26-T-3289
This contract under the MARLINE designation issued by the Navy through DLA mandates the supply of 230 coils of material, each weighing 20 pounds, identified by NSN 4020-00-240-2185 and purchase request 7017757212, meeting Type 4, Class 1 specifications. The material must be packaged in snug-fitting weather-resistant fiberboard boxes compliant with ASTM D5118, and all packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except in specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents as authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The jute material replaces hemp in packaging, and the minimum breaking strength is reduced to 140 lbs instead of 175 lbs, with ASTM-D681 permissible for tar content determination. Source inspection is required if the vendor has not supplied this item within the past three years, and inspection and acceptance occur at the destination point. Delivery is scheduled to occur within 525 days from the contract award, with delivery terms set at FOB Origin and no variation allowed in quantity. The shipment must be sent to the designated receiving warehouse in Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract references the DLA Master List of Technical and Quality Requirements for all R and I-numbered specifications, with the applicable revision determined by the solicitation or award date depending on acquisition size. The material specification T-R-650 Revision A Gen 1 applies, with all packaging and handling instructions aligned to DLA’s procurement standards. The contract was solicited on August 5, 2026, with responses due by August 17, 2026, and performance is managed under NAICS code 314994 by the Department of Defense, with Matthew Kruc as the primary point of contact.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
SLOT FILLER MODULE
Solicitation # SPE8E9-26-T-3350
The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
URINAL, STATIONARY
Solicitation # SPE8E9-26-T-3310
The contract is for 78 stationary urinals with part numbers 5672 and U5672, manufactured by Anchor Fabricators Inc. in Clayton, OH, and is identified by NSN 4510-00-691-3979. The items must be color white and comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which are incorporated by full text. Packaging must meet DLA packaging specifications, and any non-accepted supplies must have government identification removed before return. The solicitation number is SPE8E9-26-T-3310, issued under a Women-Owned Small Business Set-Aside, with a NAICS code of 332913. The request was made under purchase request 7017757728, and delivery is required within 187 days after order. The place of performance is Tinker Air Force Base, Oklahoma, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. Primary point of contact is Matthew Kruc of the Department of Defense, Construction & Equipment MRO SVC I.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR UNIT, REF
Solicitation # SPE8E9-26-T-3321
The contract is for the procurement of ten refrigerator compressor units identified by NSN 4130-01-090-9093 under solicitation SPE8E9-26-T-3321, issued as a total small business set-aside under NAICS code 333415. Delivery is required within 167 days of contract award, with a specific ship date of February 1, 2027, and an original required delivery date of October 30, 2027. Items must be shipped FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, requiring each unit to be individually encased in a wooden box and secured with plywood planks to prevent movement, with marking per MIL-STD-129 and no special marking codes. The delivery destination is DLA Distribution Puget Sound in Bremerton, Washington. Strict prohibitions apply regarding mercury or mercury-containing compounds, which must not be intentionally added or come into direct contact with any supplied hardware except for specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Transportation regulations are governed by DLAD Proc Notes C19 and C20, and the unit of issue is specified per DoD standards. The point of contact for inquiries is Matthew Kruc, with additional contract details accessible via the DIBBS system.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DU
Solicitation # SPE8E9-26-T-3360
The contract specifies the procurement of two cooling coils, air, du, identified by NSN 4130015338172 and part numbers 1262-01-D REV A and 6W8-34-5608T, under solicitation SPE8E9-26-T-3360. The quantity is fixed at two units with no variance allowed, and delivery is required within 167 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation, packaging, and container specifications, and marking must adhere to MIL-STD-129 with no special marking required. All packaging and handling requirements are governed by DLA’s official packaging standards, and the shipment must be sent to the designated receiving warehouse in Tracy, California. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and defense information protections under RD003 may apply. The contract includes transportation guidelines referenced in DLAD Proc Notes C19 and C20, and the original required delivery date is May 18, 2027, with a need ship date of February 1, 2027. The NAICS code is 333415, and the responsible contracting office is under the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
DRAFTING INSTRUMENT
Solicitation # SPE8E9-26-T-3303
This contract governs the procurement of drafting instruments under NSN 6675-00-641-3531, with a quantity of 64 units, pursuant to solicitation SPE8E9-26-T-3303. The technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RP001, RQ006, and RA001, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless a solicitation amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary as mandated by NAVSEA 5100-003D. The product specification deviates from CID A-A-52034 in specific ways: the center horn must be a transparent plastic disc with defined diameter and tolerance, paired with a centered rubber gasket having prescribed dimensions and protrusion, and revised nomenclature replaces obsolete classifications for protractors and triangles, now correctly identifying them as semicircular protractors and triangles with specified angles and dimensions. The contract item is procured as a fully competitive commercial item under federal specification, with delivery due 167 days after award, and is managed by the Department of Defense’s Construction & Equipment MRO Service I, with performance located in New Cumberland, Pennsylvania.
All Other Miscellaneous Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELEC
Solicitation # SPE8E9-26-T-3314
The contract is for the procurement of 46 electric soldering irons with a part number of 3439-00-965-0090, specified as 200 watts with shape B tips, requiring two tips per unit. The item is not classified as hazardous and does not require a Safety Data Sheet, though the hazardous item indicator must remain unchanged. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents authorized by NAVSEA. Any portable devices containing mercury must be shock-proof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging, identification, and marking of non-accepted supplies must comply with DLA standards including removal of government identification and physical marking requirements. The solicitation number is SPE8E9-26-T-3314, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332216 for federal procurement administered by the Department of Defense’s Construction & Equipment MRO Service I. Deliveries are due within 167 days of award, and the place of performance is New Cumberland, PA, with Matthew Kruc listed as the primary point of contact.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BRACKET, CYLINDER ST
Solicitation # SPE8E9-26-T-3323
The contract pertains to the procurement of a BRACKET, CYLINDER ST with NSN 4210-01-141-4027 and part number 52427, supplied by TYCO FIRE PRODUCTS LP. A total of 27 units are required at a unit price of $27.00, resulting in a total contract value of $729.00. Delivery is scheduled to occur within 167 days from the contract date, with FOB origin terms and inspection and acceptance points set at the destination. All packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is classified as a commercial item, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and solicitation timeline. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, and the shipment must comply with DLA transportation notes C19 and C20 for freight and first destination handling. The required ship date is February 1, 2027, and the original delivery deadline is April 16, 2027. The solicitation was issued under contract number SPE8E9-26-T-3323, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Construction & Equipment MRO Service I under NAICS code 333998.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details