Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHEET, METAL

Active
SPE8E9-26-T-3385Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of titanium metal sheet measuring 0.012 inches thick, 36 inches wide, and 96 inches long, with a weight of 6.76 pounds per sheet, supplied in whole-foot lengths only. The material must conform to SAE AMS4901V and SAE AMS2809B standards, with a required Certificate of Quality Compliance (Mill-Material Certification) included with every shipment, copied to the DLA Troop Support Contracting Officer. All units must bear continuous identification markings including the DLA delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stamping or stenciling using waterproof, non-contaminating fluids and be clearly legible to the unaided eye. Adhesive labels are required for thin bars, tubes, and wires under 0.250 inches nominal OD. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including four-corner and full-edge protection, fiberboard top and bottom protection, and specific special marking codes Z and ZZ as defined by ASTM A700. The product must be delivered FOB origin to DLA Distribution Cherry Point in North Carolina by January 18, 2027, with no variance allowed in quantity. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from this requirement must be explicitly declared. If the supplier is on the QSLD, government inspection requirements such as COQC, PVT, QAP-EQ003, and RQ006 are waived, though full compliance with all other technical and quality provisions remains mandatory. Non-compliance, including unauthorized substitutions from unapproved distributors, may result in criminal penalties. The Technical Data Package references specific CDRLs and quality requirements, accessible through the DLA Master List of Technical and Quality Requirements. The NSN 9535-00-596-2093 corresponds to four sheets, with procurement governed by DLA’s standardized unit of issue and shipping protocols outlined in DLAD Procurement Notes C19 and C20. All documentation, certifications, and packaging must strictly adhere to the specifications provided to avoid rejection of the end product.

General Info

Titanium sheet procurement per AMS standards, marked and packaged to MIL specs, delivered FOB origin by Jan 18, 2027, QSLD suppliers only.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E9-26-T-3385 for DLA Troop Support Construction & Equipment MRO

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
TAYLOR BARLETTA
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHEET,METAL
METAL SHEET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
TITANIUM
0.012 IN THK 36 IN W 96 IN LG
6.76 LB/SH
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
SPE8E9-26-T-3385
SECTION B
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS4901V REVISION NR V DTD 02/25/2025 PART PIECE NUMBER: CP-1, CDA, HR, ANLD
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS2809B
SPE8E9-26-T-3385
SECTION B
REVISION NR B DTD 05/01/2024
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017586027 0001 SH 4.000
NSN/MATERIAL:9535005962093
DELIVERY (IN DAYS):0153
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:A
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPECIAL PACKAGING CODES Z AND ZZ SHALL BE AS SPECIFIED IN ASTM A700.
MARKING Z= MARKING SPECIFICATION(S) LISTED IN CONTRACT AND ADDITIONAL
REQUIREMENTS IN THE PURCHASE ORDER TEXT(POT).
Packaging The product shall be prepared for shipment in accordance with commercial practice and in compliance with applicable rules and regulations pertaining to the handling, packaging, and transportation of the product to ensure carrier acceptance and safe delivery.
UNIT OR INTERMEDIATE UNIT CONTAINER PACKAGING REQUIRES:
- ROBUST FOUR CORNER MATERIAL PROTECTION
- FULL COVERAGE MATERIAL SIDE EDGE PROTECTION
- FIBERBOARD OR BETTER TOP AND BOTTOM FULL COVERAGE MATERIAL PROTECTION
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
SPE8E9-26-T-3385
SECTION B
PR: 7017586027 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:01/18/2027 Original Required Delivery Date:02/13/2027
SPE8E9-26-T-3385 NSN/Part Number: 9535-00-596-2093 Quantity: 4 SH Purchase Request: 7017586027QTY: 4 Delivery: 153 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331491
New
Federal
16--DUCT ASSEMBLY,AIR C
Solicitation # SPE4A726T628X
The U.S. Department of Defense, through DLA Aviation, is soliciting quotes for a Small Business Set Aside procurement of NSN 1660011626536, DUCT ASSEMBLY, AIR C, with a total requirement of eight units—seven to be delivered within 511 days and one within 90 days, both to DLA Distribution at W1A8. The solicitation, numbered SPE4A726T628X, was posted on August 6, 2026, and responses must be submitted electronically no later than August 14, 2026. This procurement is classified under NAICS code 331491 and is restricted exclusively to small businesses as defined by the SBA. All responsible suppliers are encouraged to respond, and submissions must be received by the deadline to be considered. Inquiry questions should be directed via email to the designated point of contact, DibbsBSM@dla.mil, with additional information accessible through the official DIBBS solicitation portal. The contract will be awarded to a vendor capable of meeting the delivery schedule and quality standards, with performance taking place under the jurisdiction of the Department of Defense.
DLA Aviation

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 331491
New
DIBBS
Aluminum Alloy Alclad Sheet ManufacturingThe contract involves the manufacture and supply of aluminum alloy Alclad sheets adhering strictly to military specifications, with exact requirements for dimensions, cladding thickness, and temper designation to ensure performance and durability under demanding operational conditions. The materials must meet rigorous quality standards to support defense applications, and the production process must verify compliance with established technical criteria throughout all phases of fabrication. The contract is a subcontract issued under the NAICS code 331491, with performance obligated at Tinker Air Force Base, Oklahoma, and a response deadline of August 17, 2026. The contracting entity is the Department of Defense through the Depot Oklahoma office, and the solicitation is managed through the DIBBS system under reference SPE8E426T1945. All proposals must be submitted prior to the deadline to be considered, and suppliers are expected to demonstrate proven capability in producing military-grade Alclad sheets to support critical defense infrastructure.
DEPOT OKLAHOMA

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
Precision Laminated Metal Shim Manufacturing
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
Titanium Structural Beam Manufacturing & SupplyThe contract calls for the manufacture and supply of titanium alloy structural beams meeting the specifications outlined in MIL-T-81556, requiring strict adherence to dimensional tolerances and full heat and lot traceability to ensure material integrity and compliance with defense standards. The work involves producing precision-engineered components suitable for high-performance aerospace or defense applications, where material consistency and documentation are critical for certification and operational safety. All deliveries must be accompanied by complete traceability records for each heat lot to verify composition, processing history, and quality assurance. This is a small business set-aside subcontract under the SBA program, reserved exclusively for small businesses as defined by the Federal Acquisition Regulation, and is classified under NAICS code 331491 for other nonferrous metal rolling, drawing, and extruding. The solicitation was posted by the Defense Logistics Agency on behalf of the Department of Defense, with responses due by August 17, 2026. Performance location and point of contact details are not specified, but all work must align with federal defense procurement requirements and be submitted through the designated DIBBS platform. Contractors must be prepared to demonstrate compliance with military-grade manufacturing controls, including documentation, inspection protocols, and supply chain transparency.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
Titanium Metal Sheet SupplyThe contract requires the supply of four sheets of titanium metal that must strictly conform to SAE AMS4901V and SAE AMS2809B material specifications, ensuring the metal meets the required chemical composition, mechanical properties, and processing standards for high-performance applications. Each sheet must be accompanied by full certification documentation verifying compliance with these aerospace-grade standards and must be labeled in accordance with MIL-STD-129 requirements to ensure proper identification, traceability, and handling throughout the supply chain. The performance location is specified as Cherry Point, North Carolina, with a zip code of 28533-5040, indicating the delivery destination for the material. The contract, classified as a subcontract under NAICS code 331491, was posted on August 5, 2026, and responses are due by August 17, 2026, with the acquiring agency being the Department of Defense through the Construction & Equipment MRO SVC I office.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3307
This procurement requires aluminum alloy sheet metal with specific dimensions of 0.012 inches thick, 48 inches wide, and 144 inches long, weighing approximately 8.304 pounds per sheet, and must be supplied in whole-foot lengths only. All material must comply with exact specifications and严禁 test coupons; non-conforming sheets will be rejected. A Certificate of Quality Compliance, or Mill-Material Certification, is mandatory for every shipment and must be included with the delivery and submitted separately to the DLA Troop Support Contracting Officer. The material must meet the technical standards referenced in the Technical Data Package, including SAE AMS-QQ-A-250B, ASTM B666/B666M-20, and ASTM B660-23, and must be of Alloy 7075 in T6 temper. Continuous identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, permanent, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches nominal OD. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation, and any deviation from this requirement must be explicitly stated by the offeror. Suppliers on the QSLD are exempt from source inspection unless otherwise specified, and compliance with the QSL program is strictly enforced—failure to comply may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, including robust four-corner protection, full edge coverage, and fiberboard or superior top and bottom protection. Marking must follow MIL-STD-129, with special codes ZZ indicating preservation in accordance with ASTM B660 and marking per ASTM B666. The delivery is FOB origin, with inspection and acceptance occurring at destination, and the entire order of 98 sheets must be delivered within 167 days to Warner Robins Air Force Base, Georgia. Failure to meet any requirement, including marking, packaging, or supplier qualification, will result in rejection of the product.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1954
The contract specifies the procurement of aluminum alloy plate measuring 0.250 inches thick, 48.00 inches wide, and 144.00 inches long, manufactured to SAE AMS-QQ-A-250/8C revision C and other referenced technical standards including ASTM B666/B666M-20 and ASTM B660-23, with a temper of H32 and alloy designation of 5052. The material must be supplied in whole-foot lengths only and conform strictly to the dimensional requirements without exception or allowance for test coupons. Continuous marking is mandatory on every unit, including the DLA contract delivery order number, NSN, specification number and revision, alloy grade and temper, manufacturer’s name, heat and lot number, and exact dimensions, using stamping or stenciling methods that are legible, waterproof, and non-contaminating; adhesive labels are permitted for thin bars and tubes. A Certificate of Quality Compliance must accompany each shipment and be forwarded to the contracting officer, and all packaging must adhere to MIL-STD-2073-1E and ASTM B660 Level A requirements with preservation code ZZ and marking code Z as specified. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from this requirement must be explicitly declared; non-compliant bids are subject to rejection and potential criminal penalties for unauthorized substitutions. Government inspection requirements such as COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006 are waived for QSLD-compliant suppliers, except in Foreign Military Sales cases. The material must be delivered FOB origin, within a 167-day window from the award, with zero tolerance for quantity variance. Packaging and marking must fully comply with MIL-STD-129R, and shipments are to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE8E4-26-T-1954, with a response deadline of August 17, 2026, and a required delivery date of November 27, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and supplemental documents such as the Technical Data Package and CDRLs must be reviewed for full compliance.
DDSP NEW CUMBERLAND FACILITY

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1942
This contract specifies the procurement of a metal plate made from aluminum alloy Alclad, measuring 0.313 inches thick, 36.00 inches wide, and 96.00 inches long, with a reference weight of 108.24 pounds per piece. The material must strictly conform to the technical requirements outlined in the DLA Master List of Technical and Quality Requirements and be manufactured in accordance with SAE AMS-QQ-A-250/5C and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23. The plate is designated as a critical application item, and only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid; any deviation from this requirement must be explicitly declared and may result in disqualification. Compliance with the QSL program is mandatory, and failure to meet its terms constitutes an unauthorized substitution with potential criminal penalties. Every shipment must include a Certificate of Quality Compliance, with continuous marking on each unit containing the contract number, NSN, specification revision, alloy, temper, manufacturer details, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material. Plates must be supplied in whole foot lengths only and packaged per MIL-STD-2073-1E and ASTM B660 with preservation code ZZ, and marked in compliance with MIL-STD-129R. The delivery requirement is for two pieces, with a delivery deadline of 167 days from award, FOB origin, and inspection and acceptance at destination. The procurement is a total small business set-aside under NAICS code 331491, managed by DLA Troop Support, with all technical, quality, and packaging controls governed by DLA directives and referenced documents.
DLA DIST SAN JOAQUIN

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
SHIM STOCK, LAMINATE
Solicitation # SPE8E9-26-T-3375
This contract specifies the procurement of laminated shim stock made from aluminum alloy with a thickness of 0.250 inches, a width of 24 inches, and a length of 48 inches, to be supplied in whole-foot increments only. The material must conform to technical standards including SAE AMS-DTL-22499B, ASTM B666/B666M-20, and ASTM B660-23, and requires continuous identification marking per Fed-Std-184 that includes the DLA contract order number, NSN, specification number and revision, alloy, grade, class, type, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stamping or stenciling using waterproof, non-contaminating fluids and must remain legible and stable under normal handling; adhesive labels are permitted for bars, tubes, and shapes under 0.250 inches nominal OD, while tags are acceptable for wire. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly declared. Compliance with the QSL program waives certain government inspection requirements such as COQC, PVT, QAP-EQ003, and ASQ H1331. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 with preservation methods following ASTM B660, and palletization must follow DLA packaging requirements. The shipment is to be delivered FOB origin in 153 days to Robins AFB, Georgia, with no variance allowed in quantity. The material is marked as a critical application item, and failure to meet any requirement, particularly regarding supplier qualification or marking, may result in rejection of the product and potential criminal penalties for unauthorized substitution.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
BEAM, STRUCTURAL
Solicitation # SPE8E4-26-T-2022
The contract specifies the procurement of a structural beam made from titanium alloy, classified as AB-1 annealed per MIL-T-81556, with precise dimensional requirements of 2.840 inches in height, 4.900 inches in width, and 0.100 inches in thickness, supplied in 12-foot lengths in whole-foot increments only. Each unit must be fully identified with mandatory markings including the DLA contract delivery order number, NSN, specification revision, alloy grade and temper, manufacturer's name, heat and lot number, and dimensions, using stamping or stenciling methods that are legible, waterproof, and non-contaminating. Adhesive labels are required for small bars, tubes, and shapes under 0.250 inches in nominal outer diameter. A Certificate of Quality Compliance, including mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking in compliance with MIL-STD-129 and no special marking codes applied. The NSN is 9540-01-428-5985, with a quantity of 17 linear feet, a delivery window of 20 days, and delivery terms FOB origin. The contract includes a 10% positive quantity variance with no tolerance for reduction. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement must be explicitly declared by the offeror. Products not supplied by approved QSLD distributors are considered unauthorized substitutions and may trigger criminal penalties. Source inspection requirements are waived for qualified QSLD suppliers, and quality conformance inspections referenced in RQ006, COQC, PVT, QAP-EQ003, and ASQ H1331 do not apply. The technical data package referenced is Revision A Gen 1, aligned with MIL-T-81556A, and all CDRLs including metal certification are mandatory. The solicitation is a total small business set-aside under NAICS code 331491, issued by the Defense Logistics Agency with a response deadline of August 17, 2026. All provisions incorporate the DLA Master List of Technical and Quality Requirements, and compliance with procurement note M03 regarding Q
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E9-26-T-3392
A 2.500 inch thick, 48 inch wide, 144 inch long aluminum alloy plate made from alloy 7075 in temper T7351 is being procured under solicitation SPE8E9-26-T-3392, with a total quantity of nine pieces, each weighing 1745.280 pounds per piece. The material must strictly adhere to the exact dimensions specified, with no test coupons permitted, and must be supplied in whole foot lengths only. All units must be continuously marked with the DLA contract delivery order number, NSN, specification revision, alloy grade and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stamping or stenciling; adhesive labels are required for smaller bars and tubes under 0.250 inch nominal OD. A Certificate of Quality Compliance, or mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. The product must originate from a supplier listed on the Qualified Suppliers List for Distributors (QSLD); any deviation from this requirement constitutes an unauthorized substitution and may result in criminal penalties. References to source inspection and certain quality conformance tests are waived for qualified suppliers under the QSL program. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, specifically Level A of ASTM B660, with marking per MIL-STD-129R and special preservation code ZZ. Shipment must be palletized accordingly and delivered FOB origin to Tinker AFB, Oklahoma, with delivery required within 153 days of contract award, and no variance in quantity is permitted. The procurement is governed by multiple technical standards including SAE AMS4078, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R, and all data requirements are subject to the DLA Master List of Technical and Quality Requirements.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E9-26-T-3293
This procurement specifies a metal plate made of aluminum alloy 6061 in T651 temper, measuring 0.500 inches thick by 36 inches wide by 96 inches long, with a reference weight of 169.34 pounds per piece. The material must strictly conform to exact dimensions without allowances for test coupons and must be supplied in whole-foot lengths only. A Certificate of Quality Compliance, also known as mill-material certification, is mandatory and must accompany every shipment to the customer or DLA depot, with a copy forwarded to the DLA Troop Support Contracting Officer. Continuous marking is required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy grade and temper, manufacturer’s name, heat and lot numbers, and dimensions. Markings must be applied via stamping or stenciling, be legible to the unaided eye, waterproof, and stable under normal handling; adhesive labels are permitted for small bars, tubes, and shapes under 0.250 inches in nominal diameter. The material must comply with multiple technical standards including SAE AMS4027P Revision P, ASTM B666/B666M-20, and ASTM B660-23, and the Technical Data Package Rev B Gen 2 referenced in the contract. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM B660, with marking following MIL-STD-129 and additional requirements specified in the purchase order text. Delivery is FOB origin, with a requirement for 37 pieces to be delivered within 167 days to the DLA San Joaquin distribution center in Tracy, California. Acceptance and inspection occur at destination, with zero variance allowed in quantity. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid; any deviation must be explicitly declared, and non-compliance may result in rejection, penalties, or criminal liability. The solicitation waives source inspection requirements for approved QSLD suppliers, and all documentation, including CDRL-METALSCERT, must align with DLA’s Master List of Technical and Quality Requirements. The NSN is 9535-00-231-8236, the purchase request number is 7017757254, and the contract is designated a critical application item.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

4 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 423830
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE8E9-26-Q-0668
The contract pertains to the procurement of one centrifugal fan identified by NSN 4140-01-621-1521 under solicitation SPE8E9-26-Q-0668, issued by the Department of Defense through the Construction & Equipment MRO Service I office. The item is subject to a firm fixed price with no variance in quantity, requiring delivery within 60 days after award, and specifies destination as both the inspection and acceptance point. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization aligned to DLA’s RP001 packaging requirements, and all DLA Master List of Technical and Quality Requirements take precedence over any civilian standards. The product is to be shipped using the fastest traceable method, explicitly prohibiting parcel post, with the freight destination at Underwater Construction Team 2 in Port Hueneme, CA. The government’s internal identifiers, including RDD 777 and Project ZH9, are provided for tracking, and the material is needed by January 29, 2026. The contract incorporates all referenced technical and quality standards from the DLA Master List, effective based on the solicitation issue date, and requires complete removal of government identification from non-accepted supplies. Covered defense information provisions apply, and the unit of issue is per EA, with pricing left blank for vendor submission.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI Protection
Computer Systems Design Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 484121
New
DIBBS
Domestic and International Transportation / Freight Logistics
General Freight Trucking, Long-Distance, Truckload

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Labeling Services for Defense Shipments
Packaging and Labeling Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
Manufacturing of Breathing Facepiece Assemblies
Surgical Appliance and Supplies Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Marking, and SDS ComplianceThe contract requires precise packaging and labeling of respirator units in full compliance with DLA RP001 standards, ensuring that each unit is properly prepared for safe transport and storage. Alongside physical preparation, the contractor must generate and submit accurate Safety Data Sheets for any hazardous materials included in or associated with the respirator units, adhering strictly to federal transport and handling regulations. This work is essential to maintain regulatory compliance and operational readiness for defense-related logistics. The contract is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA in accordance with FAR 19.5, meaning only small businesses are eligible to respond. It falls under NAICS code 561910, which classifies it within other support activities for air transportation, though the actual scope centers on packaging and compliance services. The solicitation was posted on August 5, 2026, with responses due by August 12, 2026, and is managed by the Department of Defense under the Construction & Equipment MRO SVC I organization. All work must be performed in accordance with government specifications, and the primary focus remains on quality, compliance, and timely documentation.
Packaging and Labeling Services

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 423450
New
DIBBS
Critical Safety Item (CSI) Sourcing and Traceability ComplianceThe contract requires the sourcing of critical safety items including filters, seals, and valves from approved vendors, ensuring full supply chain traceability and comprehensive documentation to comply with military Critical Safety Item (CSI) standards. All components must be procured with verifiable provenance, maintaining uninterrupted lineage from raw materials to final assembly to meet stringent defense requirements for reliability and accountability. The subcontract is designated as a Total Small Business Set-Aside under SBA regulations, exclusively available to small businesses as defined by the North American Industry Classification System code 423450, which pertains to merchant wholesalers of hardware, plumbing, and heating equipment. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the Department of Defense under the Construction & Equipment MRO SVC I procurement office, with performance expected to support defense maintenance, repair, and overhaul operations without a specified geographic location.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 339113
New
DIBBS
Reconditioned Respirator Outfit SupplyThe contract calls for the procurement, reconditioning, and delivery of 17 military-spec respirator outfits sourced from surplus government property, requiring full refurbishment to restore each unit to like-new condition. This includes comprehensive testing and certification to ensure all units meet established military standards for functionality, safety, and performance, with no compromises on quality or compliance. The work must be performed in accordance with exacting technical requirements to guarantee readiness for operational use by trained personnel. This opportunity is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 339113 indicating classification within medical equipment and supplies manufacturing. The solicitation was posted on August 5, 2026, with responses due by August 12, 2026, under the Department of Defense’s Construction & Equipment MRO SVC I program. All units must be delivered to an unspecified location within the United States, and while no point of contact or detailed address is provided, the procurement is accessible through the DIBBS system via the official RFQ link.
Surgical Appliance and Supplies Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Covered Defense Information (CDI) SafeguardingThis contract requires the implementation of NIST SP 800-171 controls to safeguard Covered Defense Information (CDI) across all applicable systems and processes. The scope includes conducting comprehensive system assessments to verify compliance, establishing strict access controls to limit authorization to authorized personnel only, and ensuring timely cyber incident reporting in accordance with federal standards. The work must be performed at Tinker AFB with a zip code of 73145-8000, and all activities must align with the requirements of the Department of Defense under the Construction & Equipment MRO SVC I contracting vehicle. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, meaning only small businesses are eligible to respond. The North American Industry Classification System code is 541512, indicating the work falls under Computer Systems Design and Related Services. Responses are due by August 17, 2026, with the solicitation posted on August 5, 2026, and the contract is structured as a subcontract under a larger federal acquisition framework.
Computer Systems Design Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 483111
New
DIBBS
Domestic and International Shipping with U.S.-Flag Vessel ComplianceThe contract requires comprehensive transportation and logistics management services with mandatory use of U.S.-flag vessels to deliver cargo to Tinker AFB, ensuring full compliance with the Jones Act and Department of Defense shipping regulations. All shipments must adhere to stringent federal maritime and military logistics standards, emphasizing domestic vessel usage and secure, timely delivery protocols. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses qualifying under SBA guidelines, with the NAICS code 483111 identifying it as water transportation of freight. Responses are due by August 17, 2026, following a posting date of August 5, 2026, and the place of performance is fixed at Tinker AFB with a ZIP code of 73145-8000. The contracting activity falls under the Department of Defense’s Construction & Equipment MRO SVC I office, which oversees maintenance, repair, and overhaul support services. While no specific point of contact is listed, the solicitation number SPE8E926T3355 provides the primary reference for submission and inquiries through the DIBBS system. All offerors must demonstrate proven capability in managing complex domestic and international shipping networks while maintaining strict adherence to U.S.-flag vessel requirements and DoD compliance frameworks.
Deep Sea Freight Transportation

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 541350
New
DIBBS
Radioactive Materials Notification and Handling ComplianceThe contract requires comprehensive detection, labeling, and advance notification services for any items containing radioactive materials that exceed established regulatory thresholds as defined by the Department of Defense and the Nuclear Regulatory Commission. Performance must align strictly with federal safety and compliance standards to ensure secure handling, proper identification, and timely communication of radioactive content throughout the supply chain. The work is targeted at identifying and managing potential hazards before they reach sensitive DoD locations, with an emphasis on preventing exposure, enforcing regulatory adherence, and maintaining operational safety. This is a total small business set-aside subcontract under NAICS code 541350, open only to small businesses certified by the SBA, with a response deadline of August 17, 2026. The contract is issued under the Department of Defense’s Construction & Equipment MRO SVC I program and will be performed at Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000. The solicitation, identified by the number SPE8E926T3355, was posted on August 5, 2026, and contractors must demonstrate proven capability in radiation detection technologies, regulatory compliance protocols, and secure logistics procedures to meet the stringent demands of defense-related radioactive material management.
Building Inspection Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Hazardous Materials Packaging and Labeling ServicesThe contract seeks specialized services for packaging hazardous materials, applying hazard warning labels, and preparing accurate Safety Data Sheets in full compliance with federal and military regulations. All work must adhere to stringent standards governing the safe handling, transportation, and documentation of dangerous goods, ensuring alignment with Department of Defense requirements and relevant hazardous materials transportation codes. The services are critical to supporting secure and compliant logistics operations for defense-related shipments. This is a small business set-aside subcontract under NAICS code 561910, exclusively available to small businesses as defined by the SBA. The opportunity was posted on August 5, 2026, with proposals due by August 17, 2026, and performance is expected to be centered at Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000. The contracting activity falls under the Department of Defense, specifically the Construction & Equipment MRO SVC I office, and the successful vendor will be responsible for delivering all packaging, labeling, and SDS documentation services on time and to exacting quality standards to support military readiness and safety protocols.
Packaging and Labeling Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details