This Solicitation opportunity from Department Of Defense was posted on August 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BAR, METAL

Closed

SPE8E4-26-T-2046Federal

Submission Closed08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331491

New

DIBBS

Nickel-Copper Alloy Plate SupplierThis subcontract opportunity through the Department of Defense DDSP New Cumberland Facility seeks a supplier to provide specialized Nickel-Copper Alloy, Class A, Form 6 metal plates. The required materials must be in Hot Finished As Rolled condition, measuring 0.750 by 36.00 by 120.00 inches, and must strictly comply with SAE AMS2807C Revision C standards. The order consists of two plates, each weighing approximately 1035.99 pounds, intended for prime contractors supporting DLA Troop Support contracts. Eligible bidders must possess a valid UEI, CAGE code, and active SAM registration. The procurement falls under NAICS code 331491, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Nonmetallic Special Shaped Section Seals (NSN 5330010520009)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0188

Solicitation SPE8E4-27-T-0188 is a small business set-aside fixed-price contract for the procurement of 16 feet of non-electrical nickel-copper alloy wire. The required material is round, spring temper, with a diameter of 0.093 inches and a length of 2.00 feet per piece. Delivery is required within 138 days after receipt of the order, with a need ship date of March 28, 2027, and a final required delivery date of April 25, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contractor must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Strict marking and packaging requirements apply, including continuous identification of the DLA contract delivery order number, NSN, manufacturer, and material specifications. Markings must be waterproof and legible, with tags being an acceptable method for wires. The procurement adheres to several technical standards, including QQ-N-281D(2), SAE AMS2806, and ASTM A700. Inspection and acceptance will occur at the destination.

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0184

Solicitation SPE8E4-27-T-0184 is a fixed-price request for 25 sheets of nickel-copper alloy metal sheeting, Class A, Form 4, in a cold rolled annealed condition. The material must be 0.125 inches thick, 36.00 inches wide, and 96.00 inches long, conforming to exact dimensions as test coupons are not permitted. Delivery is required within 138 days after order, with a need ship date of March 28, 2027, and a final required delivery date of June 1, 2027, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is subject to strict quality and eligibility requirements, specifically requiring suppliers to be listed on the Qualified Suppliers List for Manufacturers (QSLM) or Distributors (QSLD). Key technical standards include QQ-N-281D(2), MIL-STD-129R(3), ASTM A700-14, and SAE AMS2807C. Contractors must provide a Certificate of Quality Compliance (Mill-Material Certification) and adhere to comprehensive continuous identification marking requirements. Inspection and acceptance will occur at the destination. The contract also incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0185

Solicitation SPE8E4-27-T-0185 is a fixed-price procurement for two units of metal plate consisting of a nickel-copper alloy, class A, form 6, in a hot finished as-rolled condition. Each plate must measure 0.750 inches thick, 36.00 inches wide, and 120.00 inches long, with a reference weight of 1035.99 lbs per unit. The material must comply with SAE AMS2807C and other specified technical standards. Delivery is required by May 20, 2027, with a need ship date of April 26, 2027, delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates rigorous quality controls, including a required Certificate of Quality Compliance (Mill-Material Certification) and adherence to Metal Certification Contract Data Requirements Lists. Packaging and preservation must follow ASTM A700 and MIL-STD-2073-1E, while marking must comply with MIL-STD-129, including specific continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. Inspection and acceptance will occur at the destination. The procurement also incorporates standard FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and hazardous material identification.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0528

Solicitation SPE7M2-27-T-0528 is a small business set-aside for the procurement of electrical wire under NSN 6145-00-949-8006, managed by the DLA Weapons Support Nuclear Reactor Program. The requirement consists of three line items totaling 67,762 feet of wire, to be delivered in 500-foot spools. Deliveries are scheduled for 105 days after order and are destined for DLA Distribution Depots in Hill AFB, Utah; Tinker AFB, Oklahoma; and New Cumberland, Pennsylvania. The contract is established as FOB Origin, with inspection and acceptance occurring at the destination. Technical compliance is critical, as the item is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL approved at the time of award. The wire must adhere to SAE AS22759/11A and SAE AS22759E standards, and the contractor must ensure that mercury or mercury-containing compounds are not intentionally added. Packaging and preservation must comply with MIL-DTL-12000 and MIL-STD-2073-1E, while marking must follow MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and adherence to DFARS cybersecurity and domestic sourcing regulations, including the Buy American Act.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0168

Solicitation SPE8E4-27-T-0168 is a request for quotations for the procurement of aluminum alloy metal sheets, specifically NSN 9535-00-084-4370. The material must be 0.063 inches thick, 36 inches wide, and 72 inches long, conforming to SAE AMS-QQ-A-250/4B and reference drawing 14153 01735. The requirement is split into two line items totaling 33 sheets, with 15 sheets for DLA Distribution Warner Robins and 18 sheets for DLA Distribution Depot Oklahoma. Delivery is required within 55 days after order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Contractors must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and adhere to strict marking and packaging standards, including MIL-STD-129, MIL-STD-2073-1E, and ASTM B660. The contract emphasizes that failure to comply with exact dimensions and marking requirements will result in the rejection of the product. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and HUBZone price evaluation preferences.

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0427

Solicitation SPE7M2-27-T-0427 is a procurement request by the Defense Logistics Agency Weapons Support Nuclear Reactor Program for 319 spools of electrical wire, identified by NSN 6145-00-239-1304. Each spool must contain one continuous length of 500 feet. The requirement is designated as a critical application item and must adhere to basic CID A-A-59544A. Delivery is required within 167 days, with a need ship date of April 26, 2027, and an original required delivery date of July 12, 2027. The contract is awarded on a full and open competition basis, though it is noted as a total small business set-aside under FAR 19.5 in the metadata. Technical specifications mandate that mercury or mercury-containing compounds must not be intentionally added to the hardware or used in preservation, packaging, and marking. Packaging and preservation must comply with MIL-DTL-12000, MIL-STD-2073-1E, and RP001 for palletization, while marking must follow MIL-STD-129 with special marking code ZZ. Inspection and acceptance will occur at the destination per FAR 52.246-2. The shipment is FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California. Invoicing and payment must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0310

Solicitation SPE8E9-27-T-0310 is a request for quotations for the procurement of 13 sheets of aluminum alloy metal sheet, measuring 0.125 inches thick, 36 inches wide, and 144 inches long, with a weight of 64.80 lbs per sheet. The contract is issued by DLA Troop Support, Construction and Equipment MRO SVC I, with a required delivery date of February 26, 2027, and a need ship date of April 26, 2027. Delivery is FOB Origin to DLA Distribution Warner Robins at Robins AFB, Georgia. Award eligibility is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD), and the procurement incorporates technical and quality requirements from the DLA Master List. Key deliverables include a mandatory Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Packaging must adhere to MIL-STD-2073-1E and ASTM B660 Level A, featuring robust four-corner and full-coverage edge protection. Marking must comply with MIL-STD-129 and ASTM B666, requiring continuous identification including the contract delivery order number, NSN, specification number, alloy grade, and manufacturer details via stamping or stenciling. The contract is subject to the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements. Invoicing must be processed through the Wide Area WorkFlow (WAWF) system, and inspection and acceptance will occur at the destination.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Special Purpose Electrical Cable (NSN 6145011911479)This subcontract involves the manufacture or procurement of 22 units of special purpose electrical cabling, identified as NSN 6145011911479, for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. All units must strictly adhere to MIL-DTL-12000 specifications and be delivered with a Certificate of Conformance in accordance with FAR 52.246-15. Packaging and marking must comply with RP001, MIL-STD-2073-1E, and MIL-STD-129 standards. The contract requires strict adherence to cybersecurity and data protection mandates, specifically CMMC Level 2 and DFARS 252.204-7012 compliance. Performance for this requirement is centered in New Cumberland, Pennsylvania, under NAICS code 331491. Interested parties must meet the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0232

Solicitation SPE8E9-27-T-0232 is a Defense Logistics Agency requirement for three aluminum alloy metal plates, identified by NSN 9535004081729. Each plate must measure exactly 1.500 inches thick, 36 inches wide, and 96 inches long. This is designated as a critical application item, and the government will not accept test coupons or sheets that deviate from the exact dimensions. Delivery is required within 167 days, with a need ship date of April 12, 2027, shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Contractors must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Strict adherence to marking and packaging standards is mandatory, including MIL-STD-129 for marking and ASTM B660 for preservation and packing. Each unit must feature continuous identification markings, including the DLA contract delivery order number, NSN, specification number, alloy, and manufacturer details. Failure to comply with these marking requirements will result in the rejection of the product. The procurement is conducted as an automated simplified acquisition via the DIBBS system, with a price evaluation preference for certified HUBZone small businesses. It incorporates various FAR and DFARS clauses, including the Buy American Act and Berry Amendment for domestic sourcing. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Inspection and acceptance will occur at the destination.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0417

Solicitation SPE7M2-27-T-0417 is issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 22 units of special purpose electrical cable, identified by NSN 6145-01-191-1479. The contract requires delivery within 53 days after receipt of order, with a need ship date of August 4, 2026, and a final delivery destination at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Terms are set as FOB Origin, and invoicing must be processed electronically through the Wide Area WorkFlow system. The procurement is subject to strict regulatory controls, including ITAR and EAR export restrictions, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorization to access technical data. Quality and packaging must adhere to MIL-DTL-12000, MIL-STD-2073-1E, and MIL-STD-129, with inspection and acceptance occurring at the origin. Compliance requirements include the Buy American Act, DFARS cybersecurity standards such as CMMC Level 2 and DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. The solicitation is open to various small business categories under NAICS code 331491.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

2 days ago

DEADLINE

in 11 days

AI Contract Overview

The contract is for the procurement of copper alloy 464 metal bars, specified as round, half hard, with a diameter of 5.500 inches and lengths between six and eight feet, delivered in whole-foot increments only. The material must comply with ASTM B21/B21M-20 Revision 20 and other referenced standards including ASTM B249/B249M-23, SAE AMS-STD-185A, and ASTM B900-16 (R2022), with a mandatory Certificate of Quality Compliance provided with each shipment and forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are required on every unit, including the DLA delivery order number, NSN, specification revision, alloy grade, manufacturer details, heat and lot numbers, and dimensions, using only stamping or stenciling methods that are legible, waterproof, non-contaminating, and durable. Adhesive labels are mandated for bars, tubes, or shapes under 0.250 inches in nominal outer diameter, and tags are acceptable for wire. Packaging must conform to MIL-STD-2073-1E, with preservation following ASTM B900-16, and marking must adhere to MIL-STD-129R(3) with the special marking code ZZ for preservation compliance. Palletization is governed by DLA’s RP001 standards. The contract requires suppliers to be listed on the Qualified Suppliers List for Distributors (QSLD); only approved QSLD vendors are eligible for award, and any deviation must be explicitly declared. Failure to comply with QSLD requirements may result in criminal penalties. Inspection and acceptance occur at the destination, specifically at the DLA San Joaquin Distribution Center in Tracy, California, with a 164-day delivery lead time from award, a 10% quantity variance allowed, and FOB origin terms. The solicitation number is SPE8E4-26-T-2046, posted on August 9, 2026, with responses due by August 20, 2026, and the original delivery requirement is January 8, 2027. All invoicing must be processed via WAWF, and the contractor is subject to cybersecurity controls under NIST SP 800-171, hazard communication standards, and other FAR and DFARS clauses including

General Info

Copper alloy 464 bars, 5.5-inch diameter, 6–8 feet, ASTM B21/B21M-20, DLA compliant, certified, marked, packaged per MIL-STD, delivered FOB origin by Feb 1, 2027.

Agency

Department Of Defense → DLA DIST SAN JOAQUIN

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

RFQ SPE8E4-26-T-2046 for Metals Construction Equipment

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 9

Solicitation

Response DeadlineAug 20

Deadline has passed

Submission Closed

08/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Office AddressUSA

Contacts

Pamela Duffey

contact@example.gov

+1 (555) 000-0000

Full Description

BAR,METAL
BAR, METAL
COPPER ALLOY 464
ROUND, HALF HARD
5.500 IN DIA
6 TO 8 FT LG
86.700 LB/FT (REFERENCE)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
SPE8E4-26-T-2046
SECTION B
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev A Gen 1 IAW BASIC NON GOVT STD ASTM B21/B21M-20 REVISION NR 20 DTD 04/01/2020 PART PIECE NUMBER: ALLOY C46400 TMPR H02-1/2 HARD
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124
SPE8E4-26-T-2046
SECTION B
REVISION NR DTD 12/04/2025
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS-STD-185A REVISION NR A DTD 03/01/2014 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B249/B249M-23 REVISION NR DTD 10/01/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B900-16 (R 2022) REVISION NR DTD 10/01/2016 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017758535 0001 FT 6.000
NSN/MATERIAL:9530002289278
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:M
INTRMDTE CONT:10 INTRMDTE CONT QTY:000
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM B900 PACKING Z = IAW ASTM B900 MARKING IAW MIL-STD-129
ADDITIONAL MARKING REQUIREMENTS: WHEN THE
SPE8E4-26-T-2046
SECTION B
PR: 7017758535 PRLI: 0001 CONT’D
CONTRACT OR ORDER REFLECTS TWO UNITS
(EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.)
SHIPMENT MARKINGS SHALL INCLUDE THE
QUANTITY OF BOTH UNITS. THIS MARKING
DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:02/01/2027 Original Required Delivery Date:01/08/2027
SPE8E4-26-T-2046 NSN/Part Number: 9530-00-228-9278 Quantity: 6 FT Purchase Request: 7017758535QTY: 6 Delivery: 164 days ADO