Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Hazardous Materials Compliance & Documentation Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive identification, labeling, and documentation of hazardous components within materials supplied under the agreement, with strict adherence to the OSHA Hazard Communication Standard. This includes the preparation and maintenance of Safety Data Sheets (SDS) for all regulated substances, ensuring accurate hazard communication across the supply chain and compliance with federal safety regulations. All deliverables must align with current regulatory requirements to support workplace safety and regulatory audits. This is a small business set-aside subcontract under NAICS code 541620, issued by the Department of Defense through the Cherry Point Phantom Road facility, with performance required at the specified location in Cherry Point, NC, 28533-5040. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, with all applicants required to qualify as a total small business under SBA guidelines. The scope demands meticulous attention to detail in hazard communication practices to support defense-related operations while maintaining full regulatory compliance.

General Info

Small business subcontract for hazardous material labeling and SDS compliance at Cherry Point, NC, per OSHA and DoD requirements.

Agency

Department Of Defense → CHERRY POINT PHANTOM RD BLDGView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

CHERRY POINT, NC, 28533-5040, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CHERRY POINT PHANTOM RD BLDG
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → CHERRY POINT PHANTOM RD BLDG
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Identification, labeling, and documentation of hazardous components in supplied materials, including SDS preparation and compliance with OSHA Hazard Communication Standard.

Similar Contracts

Same NAICS industry code

NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract requires identification of hazardous components within navigational lights and the preparation of Safety Data Sheets compliant with OSHA standards, ensuring all chemical and material risks are accurately documented and classified. The submitted SDS documents must align with federal regulatory requirements and be formally approved by relevant government authorities. Integration with MIL-STD-129 labeling standards is mandatory, ensuring that all hazardous materials are properly marked and coded for consistent identification, handling, and storage across defense logistics systems. This work supports safety, regulatory compliance, and operational readiness within Department of Defense environments. Performance is centered at the New Cumberland facility with a zip code of 17070-5002 and is classified under NAICS code 541620, indicating technical, scientific, or laboratory services related to environmental or safety compliance. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, and is structured as a subcontract under the Department of Defense’s DDSP New Cumberland Facility. No set-aside provisions are specified, making it open to eligible subcontractors capable of meeting the rigorous technical and regulatory demands of defense-grade hazardous materials documentation and labeling.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Identification & LabelingThe contract requires the identification of hazardous materials within shipments and the accurate application of labels compliant with OSHA’s Hazard Communication Standard 29 CFR 1910.1200, ensuring all chemical hazards are properly communicated through standardized labeling practices. This includes the generation of Safety Data Sheets (SDS) and the pre-award submission of labels for review and approval, which are critical to meeting regulatory requirements before any materials are transported or handled. The work demands a thorough understanding of chemical classification, labeling criteria, and documentation procedures to ensure full compliance and safety across the supply chain. The contract is a subcontract under the NAICS code 541620, associated with environmental consulting services, and is issued by the Department of Defense through LSO COMBAT VEHICLES AND ARMAMENT. The place of performance is in Tampa, Florida, with a response deadline of August 3, 2026. Although the solicitation number and point of contact are not provided, the UI link directs to the DIBBS platform where full details may be accessed. The absence of a set-aside designation suggests the opportunity is open to all eligible contractors without preference, and all work must align with federal hazardous material handling standards applicable to defense-related logistics.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → CHERRY POINT PHANTOM RD BLDG

Same awarding agency

NAICS: 327999
New
DIBBS
TAPE, PROTECTIVE, PLASTIThe contract specifies the procurement of 24 rolls of protective plastic tape, identified by NSN 9390016510036 and part number 1814-12, with each roll measuring 12 inches by 36 yards and packaged as one roll per unit of issue. The total quantity is divided into two line items: nine rolls for delivery to Cherry Point, North Carolina, and fifteen rolls for delivery to San Diego, California, with both shipments requiring delivery within 41 days of the ship date. The tape must comply with all DLA Packaging Requirements for Procurement, including palletization and labeling per MIL-STD-129, and packaging standards under ASTM D3951 if non-hazardous, or TQ requirement IP025 if hazardous under FED-STD-313, with DLA’s Master List of Technical and Quality Requirements overriding any conflicting specifications. Delivery is FOB origin with zero quantity variance allowed, and inspection and acceptance occur at the destination. The contract, issued under solicitation SPE8E5-26-T-3659, is a total small business set-aside with a response deadline of August 3, 2026, and is managed by the Department of Defense through the Defense Logistics Agency. The unit of issue is RO, and the pricing details are included in the contract line item numbers, though specific unit and total prices are not fully detailed in the provided text. Shipments must adhere to DLA transportation procedural notes C19 and C20, and the required delivery date for both locations is November 5, 2026, with respective ship dates of July 28 and September 17, 2026.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
PARTS KIT, PRESSUREOfferors must comply with strict requirements regarding the sourcing and representation of materials and equipment under this solicitation, including adherence to the Berry Amendment and Buy American Act, with thresholds now set at $150,000 for domestic material compliance. Any non-domestic materials require explicit disclosure to the point of contact. The offeror certifies it will not provide covered telecommunications equipment or services as defined under FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit required representations for eligibility under designated small business categories. Due to frequent changes in demand, offerors are strongly encouraged to submit quantity ranges rather than fixed numbers to facilitate award flexibility without administrative delays, though this does not apply to Auto IDC. Quotes submitted after the closing date must include a “No Bid” entry on DIBBS with an anticipated quote date or reason for non-submission to maintain visibility and avoid assumption of non-responsiveness. All contractors must register through DLA’s new Account Management & Provisioning System (AMPS) within two months to maintain access to the Vendor Shipment Module and continue shipping to DLA; users of VSM WebServices must update their schema by the specified date to avoid loss of access. Additive manufacturing is prohibited unless prior written approval is obtained from the contracting officer, and offers including AM-produced items will be deemed non-responsive. The solicitation pertains to a Parts Kit, Pressure with NSN 4820-01-449-7575, requiring 97 units for delivery to Cherry Point, NC, within 364 days of award, with a response deadline of August 3, 2026, and primary point of contact listed as Marisa Thompson. Fast Pay is not applicable to this procurement.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 336412
New
DIBBS
BODY, VALVEThe contract pertains to the procurement of a relief valve housing, identified by NSN 4820009631187 and part number 26468-1, with a quantity of ten units to be delivered FOB origin within 439 days. The item is classified as a critical application item, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements referenced by R numbers, and packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including adherence to MIL-STD-129 for marking. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Cybersecurity compliance is mandated at CMMC Level 2 through self-assessment, and the item is governed by Covered Defense Information requirements. The delivery destination is DLA Distribution Cherry Point in North Carolina, with no variance permitted in quantity and inspection and acceptance occurring at origin. A separate first article test line item is included for one unit, with no separate pricing expected unless explicitly cited, and waiver of the test nullifies payment for this line. The contract is issued under solicitation SPE7MC-26-T-143U, with a response deadline of August 3, 2026, and is categorized under NAICS 336412. Technical data is deemed proprietary or insufficient for competitive procurement with no approved technical data package currently available.
Aircraft Engine and Engine Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
Manufacture of Breathing Gas Regulator Parts KitThe contract requires the full-scale production, assembly, quality assurance, and timely delivery of 4,000 units of a military-spec breathing gas regulator parts kit identified by NSN 4240-01-542-8151. All manufacturing and assembly activities must comply with stringent defense standards including DFARS requirements, source inspection protocols, and specific packaging guidelines to ensure operational readiness and field reliability. The work must be executed with strict adherence to military quality control procedures, and all components must meet or exceed the technical specifications outlined for the regulator system. This is a subcontract opportunity under the Department of Defense, with performance obligations tied to the defense industrial base. The solicitation was posted on July 17, 2026, and responses are due by July 23, 2026, indicating a short turnaround window for qualified suppliers to submit proposals. The NAICS code 332994 classifies this as a miscellaneous fabricated metal product manufacturing activity, emphasizing precision engineering and components production. While no specific location for performance or point of contact is provided, the contract is administered through a Defense Logistics Agency platform, and successful offerors will be expected to meet strict defense supply chain integrity standards without deviation.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

6 days ago

DEADLINE

in about 6 hours
View Details
NAICS: 332994
New
DIBBS
Precision Manufacturing of Breathing Gas Regulator Parts KitThe contract calls for the manufacture and supply of 12,000 units of a precision parts kit designed for demand-type breathing gas pressure regulators, which are critical safety components used in life-supporting applications. Each kit must include all necessary components for either assembly or repair, ensuring full operational integrity and compliance with stringent safety standards. The requirement is classified under NAICS code 332994, indicating it falls under other fabricated metal product manufacturing, and is structured as a subcontract under the Department of Defense. All work must be completed and delivered in accordance with technical specifications that prioritize reliability, precision, and consistency, given the life-critical nature of the end-use application. The solicitation was posted on July 17, 2026, with a response deadline of July 23, 2026, indicating a short turnaround window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, but the contract is managed through the Defense Logistics Agency’s DIBBS system, suggesting a formal procurement process governed by federal contracting protocols. The absence of a set-aside designation implies the opportunity is open to all eligible contractors without preference given to small, disadvantaged, or veteran-owned businesses. Successful bidders must demonstrate capability in high-precision manufacturing, quality control, and adherence to defense-grade standards to meet the operational demands of this essential equipment.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

6 days ago

DEADLINE

in about 6 hours
View Details
New
DIBBS
PARTS KIT, REGULATOR BRThe contract specifies the procurement of 12,000 units of a parts kit for a regulator controlling breathing gas pressure, identified by NSN 4240-01-542-8152, with a firm fixed price and no variance allowed in quantity. Delivery is required within 90 days after award, with inspection and acceptance occurring at origin. The item is classified as both a critical application and critical safety item, necessitating strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and cushioning, along with MIL-STD-129 marking without special codes. The item is supplied under two part numbers from Aerial Machine & Tool Corporation and Aqualung USA, Inc., and all units must be palletized per DLA guidelines. The delivery and shipping destination is DLA Distribution Cherry Point in North Carolina, with transportation governed by DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE8E6-26-Q-0572, with a response deadline in July 2026 and an award expected shortly thereafter. Covered Defense Information may apply, and documentation for source approval must follow RC001 requirements. Removal of government identification from non-accepted supplies is mandated under RQ011, and the unit of issue aligns with DoD standards as defined in the official DLA unit conversion spreadsheet. All contractual obligations are binding upon suppliers, with compliance enforced through origin inspection and acceptance.

POSTED

6 days ago

DEADLINE

in about 6 hours
View Details