Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance and Labeling

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires identification of hazardous components within the AX PICK HEAD or its packaging, ensuring all materials are properly assessed for chemical, physical, or biological risks. Compliance mandates the authoring of Safety Data Sheets that meet regulatory standards and the application of accurate hazard labels in strict adherence to DFARS and Federal Standard No. 313. All activities must align with defense procurement requirements, focusing on safe handling, storage, and transportation of hazardous substances throughout the supply chain. This subcontract under NAICS code 541620 is issued by the Department of Defense through its Construction & Equipment MRO SVC I office, with performance centered at FPO 96675-9600. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. Work must be executed within the context of federal defense contracting regulations, emphasizing documentation accuracy, labeling compliance, and risk mitigation for military logistics systems. No set-aside provisions are indicated, and the contract is open to qualified contractors capable of meeting stringent defense material safety standards.

General Info

Identify hazardous components in AX PICK HEAD, comply with DFARS and Federal Standard 313, provide Safety Data Sheets and proper labels for defense supply chain.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

FPO, AP, 96675-9600, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identify hazardous components in the AX PICK HEAD or packaging, author compliant Safety Data Sheets (SDS), and apply hazard labels per DFARS and Federal Standard No. 313.

Similar Contracts

Same NAICS industry code

Forestry and Parks - Request for Proposal - Water & Wastewater Systems Professional Consulting Services - Provincial Water and Wastewater Regulatory Requirements Throughout the Province

Solicitation # AB-2026-05394

Alberta Parks is seeking qualified consultants to conduct a comprehensive province-wide assessment of its potable water and wastewater systems to ensure full compliance with provincial regulatory requirements under the Environmental Protection and Enhancement Act, the Water Act, Public Health Act drinking-water standards, and other directives from Alberta Environment and Protected Areas. These systems, used across seasonal and year-round recreational facilities, vary widely in size, configuration, and operational cycles, leading to inconsistent monitoring, reporting, and compliance tracking due to differing regional practices and high seasonal staff turnover. The absence of standardized processes has hindered Alberta Parks’ ability to reliably verify compliance, detect gaps, and implement consistent improvements across regions. To resolve this, the project will identify all regulatory obligations for each facility, evaluate current adherence, and provide actionable recommendations to close compliance gaps. The outcome will include a standardized Regulatory Compliance Key Performance Indicator Matrix and a centralized annual dashboard to visually display regional performance, enabling assured, annual confirmation that all water and wastewater compliance obligations are consistently met across the province. The solicitation, AB-2026-05394, is open for proposals until August 31, 2026, with Shaun Polley, Project Manager, serving as the primary point of contact.

Forestry and Parks

POSTED

DEADLINE

in about 1 month

Stormwater Drainage Inspection and AssessmentThe contract involves the comprehensive inspection and assessment of stormwater drainage systems to ensure proper functionality and long-term reliability. Contractors are required to perform both visual and structural evaluations, utilizing advanced technologies such as CCTV and sonar to detect blockages, signs of deterioration, and design flaws within the drainage infrastructure. These inspections are critical for identifying issues that could lead to flooding, erosion, or system failure, and must be executed with precision to support maintenance and repair planning. This subcontract is issued by the Georgia Department of Transportation with a solicitation response deadline of August 25, 2026, and falls under NAICS code 541620, which corresponds to environmental consulting services. The work is expected to be performed across various locations within Georgia, though specific sites are not detailed in the provided data. The contract is open to qualified subcontractors capable of delivering technical inspection services, with no set-aside provisions indicated. All proposals must be submitted by the stated deadline through the official portal linked in the contract posting.

Department of Transportation

POSTED

DEADLINE

Airport Master Planning & Environmental ComplianceThe contract seeks qualified firms to develop comprehensive airport master plans, including airport layout plans, environmental assessments, noise compatibility studies, and land use planning initiatives, all in support of airport development and regulatory compliance. The scope of work requires detailed technical expertise to ensure alignment with federal and state aviation standards, public safety requirements, and environmental regulations, with deliverables designed to facilitate long-term infrastructure planning and community integration. All tasks must be executed with precision to support the Georgia-based Early County Government’s objectives for sustainable aviation growth and environmental stewardship. Subcontractors must submit proposals by August 28, 2026, under a solicitation linked to the Georgia Department of Administrative Services’ procurement system. The contract is classified under NAICS code 541620 for environmental consulting services and is structured as a subcontract, indicating it will be awarded to a firm working under a prime contractor or larger project framework. While specific location details are not provided, performance is expected to focus on airport facilities within Early County, Georgia, requiring on-site analysis, stakeholder coordination, and adherence to regional planning priorities. The procurement is managed through the state’s official government procurement portal, and interested parties must ensure full compliance with submission guidelines and deadlines to be considered.

Early County Government

POSTED

DEADLINE

Environmental Compliance and Site Inspection SupportThe contract involves providing pre-demolition environmental screening and compliance support for public infrastructure projects within regulated right-of-way areas, with specific focus on asbestos assessment and stormwater management controls. This work is critical to ensure regulatory adherence before any demolition activities commence, safeguarding public health and environmental integrity by identifying hazardous materials and implementing proper containment and runoff prevention measures. The services required are technical and compliance-oriented, falling under NAICS code 541620, which covers environmental consulting services. The opportunity is structured as a subcontract under the Georgia Department of Transportation, with a response deadline of August 7, 2026, and was posted on July 29, 2026. While specific performance locations are not detailed in the data, the work is expected to take place across state-managed infrastructure sites within Georgia. The procurement does not specify a set-aside classification, and no point of contact information is provided, requiring interested parties to refer to the official online portal for further details and submission requirements.

Department of Transportation

POSTED

DEADLINE

Recovered Materials Procurement SupportThe contract titled Recovered Materials Procurement Support requires the provision of advisory services and operational support to ensure the procurement of recovered materials complies with Environmental Protection Agency regulations and Resource Conservation and Recovery Act requirements. This subcontract is part of an initiative by the Massachusetts agency COCC1 - Finance & Procurement to align material acquisition practices with federal environmental standards, emphasizing sustainable sourcing and proper handling of recycled content. The work is to be performed at Moody Street in Lowell, Massachusetts, with a deadline for responses set for August 28, 2026, and the solicitation was posted on July 29, 2026. The North American Industry Classification System code 541620 indicates that the services fall under environmental consulting, specifically targeting technical guidance on compliance, documentation, and procurement processes tied to waste and material recovery. The contract does not specify a set-aside status or type, nor does it identify a point of contact or detailed performance metrics, but it implies a need for specialized expertise in navigating federal environmental regulations within procurement workflows. Contractors are expected to have experience in regulatory adherence for recovered materials, including tracking, reporting, and validation under RCRA, and must deliver services that integrate seamlessly with the agency’s broader sustainability and fiscal oversight objectives. The absence of a solicitation number and organizational details suggests a streamlined internal or state-led procurement process, with the primary focus on legal and operational compliance rather than competitive bidding parameters.

COCC1 - Finance & Procurement

POSTED

DEADLINE

Energy Efficiency Compliance ServicesThe contract requires adherence to state-mandated energy conservation standards as defined by federal and Massachusetts regulations, ensuring all materials and equipment supplied or installed meet the required efficiency criteria. Work is to be performed at Moody Street in Lowell, with a strict deadline for response submission on August 28, 2026, and the contract is structured as a subcontract under NAICS Code 541620, indicating professional, scientific, and technical services related to energy efficiency compliance. The contracting entity is the Massachusetts Finance & Procurement division, underscoring the public sector nature of the obligation and the necessity for strict regulatory alignment. There is no set-aside designation specified, and the place of performance is localized to a specific address in Lowell, requiring on-site coordination and verification of compliance.

COCC1 - Finance & Procurement

POSTED

DEADLINE

Environmental Compliance and RemediationThe contract titled Environmental Compliance and Remediation is a subcontract issued by the San Diego Unified School District under NAICS code 541620, targeting services related to the assessment, monitoring, and mitigation of environmental impacts tied to construction activities or site operations within San Diego, California, specifically in the 92124 ZIP code area. The solicitation was posted on July 29, 2026, with a firm response deadline of August 20, 2026, requiring proposers to demonstrate technical capability in identifying environmental risks, implementing regulatory compliance protocols, and executing remediation measures in alignment with applicable state and federal standards. The performance location is fixed at the designated site in San Diego, and while details on set-aside status or point of contact are not provided, the scope requires specialized environmental consulting services to support safe and lawful development activities under the district’s authority.

San Diego Unified School District

POSTED

DEADLINE

Environmental Compliance and Monitoring ServicesThe contract is for Environmental Compliance and Monitoring Services through a subcontract under the Imperial Irrigation District in California, specifically focused on the development and implementation of updated dust control and stormwater pollution prevention plans to ensure adherence to regulatory requirements. The scope includes creating comprehensive plans tailored to the site in Calipatria, with ongoing monitoring activities to verify compliance, identify potential environmental impacts, and implement corrective actions as needed. This work is critical to maintaining environmental integrity at the location and aligning with applicable state and federal environmental standards. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is classified under NAICS code 541620 for environmental consulting services. The place of performance is clearly defined as Calipatria, California, with a zip code of 92233, indicating the specific operational area. Although the type of set aside is not specified, the subcontract nature implies participation through a secondary contractor supporting the primary project execution. All deliverables must be completed in alignment with regulatory expectations, maintaining detailed records, and ensuring continuous compliance throughout the project lifecycle.

Imperial Irrigation District

POSTED

DEADLINE

Hazard Communication & Safety Data Sheet (SDS) ComplianceThe contract requires the preparation and submission of hazard warning labels and Safety Data Sheets (SDS) for all hazardous materials used in manufacturing or packaging operations, ensuring full compliance with OSHA’s Hazard Communication Standard. All documentation must accurately reflect the identities, hazards, and safety precautions associated with the chemicals involved, and must be formatted and presented in accordance with regulatory requirements to support workplace safety and legal adherence. The scope centers on delivering complete, up-to-date, and verified SDS documentation and corresponding labels that align with current federal safety mandates. This is a subcontract under the NAICS code 541620, issued by the Department of Defense through its LAND SUPPLY CHAIN office, with the place of performance located in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. The contract is not subject to any set-aside classifications, and interested parties must submit their proposals through the DIBBS platform using the provided UI link. Timing and accuracy in delivery are critical, as compliance directly impacts the safe handling and transportation of hazardous materials across defense-related supply chains.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance and Safety DataThe contract requires strict adherence to hazardous materials compliance through the accurate authoring of safety data sheets, proper labeling, and comprehensive documentation in alignment with DFARS and OSHA HAZCOM standards. This subcontract underscores the need for precise and regulatory-compliant handling of hazardous substances within the defense supply chain, ensuring all materials are properly identified, communicated, and managed to protect personnel and meet federal requirements. The work must be executed with attention to detail and full synchronization with current safety protocols to maintain operational integrity and legal compliance. The solicitation, issued under NAICS code 541620 by the Department of Defense's Aviation Supply Chain ESOc Buys, opens for responses on July 29, 2026, with a firm deadline of August 6, 2026. All deliverables must be submitted through the DIBBS platform, and there is no designated set-aside designation or geographic restriction specified. Performance location and point of contact details are not provided, implying flexibility in execution but demanding full regulatory accountability from the subcontractor regardless of operational location.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)The contract requires written notification and comprehensive compliance documentation for any item containing radioactive materials that exceed the thresholds outlined in 10 CFR 71.3. This obligation applies to all deliverables under the subcontract and demands strict adherence to federal regulations governing the handling, labeling, and reporting of radioactive substances. The contractor must ensure that all relevant technical and regulatory information is meticulously documented and submitted timely to demonstrate full alignment with safety and compliance standards. The solicitation is classified under NAICS code 541620 and is issued by the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON. Performance is required at the location in Dickson, Tennessee, with a zip code of 37055-0248. The response deadline is August 10, 2026, and the opportunity was posted on July 29, 2026. While no set-aside designation or point of contact is specified, interested parties must respond through the provided DIBBS portal before the deadline to be considered for award.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Radioactive Materials Notification & Labeling ComplianceThe contract requires the assessment of materials for radioactive content to ensure compliance with federal standards, including the mandatory notification of government authorities if any detected levels exceed established thresholds. This obligation applies to all materials under the scope of the agreement, and failure to identify or report such contaminants could result in noncompliance penalties. The contractor must also implement proper labeling of all affected items in strict accordance with MIL-STD-129, ensuring that radioactive or potentially contaminated materials are clearly and accurately marked for safe handling, storage, and transport throughout the supply chain. The work is to be performed at Hill AFB, Utah, and the contract is structured as a subcontract under the Department of Defense with a NAICS code of 541620, indicating it falls under engineering services for scientific and technical consulting. Responses are due by August 6, 2026, with the solicitation posted on July 29, 2026, and the performance location designated as a key military installation requiring stringent safety and regulatory adherence.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

Commercial Product Subcontracting and Distribution ManagementThe contract under the title Commercial Product Subcontracting and Distribution Management requires management of subcontracting flow-downs for commercial items in accordance with FAR 52.244-6, ensuring proper adherence to federal acquisition regulations governing commercial subcontracting practices. A key responsibility includes compliance with Electronic Funds Transfer protocols and facilitating accelerated payments to small business subcontractors to support timely cash flow and workforce stability. The work is tied to NAICS code 493130, which relates to logistics and supply chain support services within the Department of Defense framework, specifically under the Construction & Equipment MRO SVC I program. The solicitation was posted on July 29, 2026, with a firm deadline for responses on August 5, 2026, indicating a short window for qualified contractors to submit proposals. The nature of the contract is classified as a subcontract, and while no specific set-aside type is indicated, the emphasis on small business subcontractor payments suggests a strong preference for small business participation. Performance location and point of contact details are not provided, but the solicitation is accessible via the DIBBS portal for further submission instructions and requirements.

Farm Product Warehousing and Storage

POSTED

DEADLINE

Supply Chain Traceability and Logistics DocumentationThe contract requires consistent maintenance of supply chain traceability and accurate management of shipment data through the Department of Defense’s Vendor Shipment Module, ensuring full alignment with DLAD Proc Notes and WAWF reporting standards. This involves rigorous documentation and real-time data entry to support visibility across the logistics chain, enabling timely and compliant fulfillment of defense-related material deliveries. The effort is classified as a subcontract under NAICS code 488510, focused on transportation and logistics support services, with a response deadline of August 5, 2026, and a posting date of July 29, 2026. Performance is tied to DLA’s systems and procural guidelines, requiring strict adherence to federal supply chain protocols. Although specific location details are not provided, the work supports the Department of Defense’s broader supply chain operations, and all activities must be executed to maintain audit readiness and operational continuity.

Freight Transportation Arrangement

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling Compliance ServicesThe contract seeks technical consulting services to ensure that EAR MUFF packaging and labeling comply with OSHA regulations, FAR 52.223-1, and DLA requirements for hazardous materials, with a specific focus on pre-award label submission. The work involves providing expert guidance to align all packaging and labeling practices with federal safety and hazardous materials standards, ensuring full regulatory compliance prior to contract award. This subcontract is issued under NAICS code 541690 and is part of the Department of Defense’s Construction & Equipment MRO SVC I program, with responses required by August 5, 2026, and the solicitation posted on July 29, 2026. The place of performance and point of contact details are not specified, but the work will be conducted remotely or through coordination with the contracting office.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

EAR Muff Manufacturing and SupplyThe contract seeks the manufacture and supply of 17,500 units of ear muffs identified by NSN 4240-01-469-8738, requiring full compliance with Department of Defense technical specifications, packaging standards, labeling requirements, and hazardous materials regulations. All delivered items must meet rigorous military-grade quality and safety criteria to ensure operational effectiveness and logistical compatibility. The solicitation is structured as a subcontract under NAICS code 339920, targeting specialized manufacturers capable of fulfilling defense procurement mandates. The proposal submission deadline is August 5, 2026, with the solicitation posted on July 29, 2026, offering a seven-day window for responses. The contract falls under the purview of the Department of Defense, managed by the Construction & Equipment MRO Service I office, though specific performance location and point of contact details are not provided. All vendors must adhere to DLA’s stringent documentation and compliance protocols to be considered for award.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

Military Shipment Packaging and LabelingThe contract requires precise packaging and labeling of the AX PICK HEAD in full compliance with military logistics standards, specifically MIL-STD-2073-1E for preservation, packaging, and packing, and MIL-STD-129 for labeling and marking of items for shipment. The delivery must be made directly to a naval vessel at FOB DESTINATION, meaning the contractor assumes responsibility for the entire logistics chain up to and including final delivery on board the vessel, with no further transportation required by the government. The work must adhere strictly to defense supply chain requirements, ensuring items are properly protected, documented, and marked for seamless integration into naval inventory systems. The solicitation is categorized as a subcontract under NAICS code 493190, indicating a focus on other transportation support activities, and is issued by the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MRO SVC I. The place of performance is listed as FPO with ZIP 96675-9600, reflecting a military postal address typically used for overseas or shipboard deliveries. The response deadline is August 10, 2026, and the posting date is July 29, 2026, providing a narrow window for submission. The contract does not indicate a specific set-aside designation, and all work must be executed in alignment with DoD standards without deviation to ensure readiness and logistical compatibility.

Other Warehousing and Storage

POSTED

DEADLINE

AX Pick Head Manufacturing and SupplyThe contract seeks the manufacture or sourcing of a military-spec AX PICK HEAD with NSN 4210-01-653-2182, requiring full compliance with Defense Logistics Agency standards covering technical specifications, quality control protocols, and accurate identification marking. All delivered units must meet stringent defense-grade requirements to ensure performance, durability, and traceability in operational environments. The work must be performed in accordance with established DLA guidelines, with emphasis on precision engineering and adherence to documented material and finish criteria. This is a subcontract opportunity under NAICS code 333998, with a response deadline of August 10, 2026, and a posted date of July 29, 2026. The place of performance is designated as FPO, ZIP 96675-9600, indicating delivery to a military postal location. The contract is managed by the Department of Defense under the Construction & Equipment MRO SVC I office, with no set-aside designation specified. All proposals must be submitted through the DIBBS portal using the referenced solicitation link, and suppliers are expected to demonstrate proven capability in producing certified military hardware with full documentation trail for inspection and audit readiness.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Transportation and Logistics Coordination (First Destination)The contract pertains to the coordination of first destination military freight logistics, requiring full management of scheduling, real-time tracking, and strict adherence to Department of Defense shipment protocols. It encompasses end-to-end oversight of transportation activities to ensure timely, secure, and compliant movement of military cargo to its initial destination, with all operations aligning with DoD standards and regulatory requirements. The subcontract is categorized under NAICS code 488510, indicating focus on freight transportation arrangement and logistics support services. The opportunity was posted on July 29, 2026, with a response deadline of August 4, 2026, and is issued under the agency name Construction & Equipment MRO SVC I, which operates within the Department of Defense. The place of performance is not specified, implying that services may be required across multiple locations or as directed by operational needs. The solicitation is accessible via the DIBBS portal, and while no set-aside designation is listed, the nature of the contract suggests that qualified providers must demonstrate proven experience in military logistics and compliance with federal defense transportation guidelines.

Freight Transportation Arrangement

POSTED

DEADLINE

First Article Testing (FAT) and Quality DocumentationThe contract requires the execution and documentation of First Article Testing in accordance with DI-NDTI-80809B, encompassing comprehensive test planning, appropriate sampling procedures, and formal submission to government authorities. This subcontract is focused on ensuring that initial production units meet all specified performance, design, and quality requirements before full-scale manufacturing begins. The work must adhere strictly to the technical standards outlined in the referenced directive, with all test results, data, and supporting documentation thoroughly compiled and submitted for government review and approval. The solicitation is categorized under NAICS code 541380, indicating specialized engineering services, and is issued by the Department of Defense under the Construction & Equipment MRO SVC I program. The response deadline is August 4, 2026, with the opportunity posted on July 29, 2026. Although specific location and point of contact details are not provided, the place of performance and administrative responsibilities will align with DoD subcontracting protocols. All deliverables must be traceable, accurate, and compliant with federal quality assurance expectations for defense-related manufacturing processes.

Testing Laboratories and Services

POSTED

DEADLINE

Packaging, Labeling, and Barcoding ServicesThe contract calls for military-compliant packaging, labeling, and barcode application services for items supplied to the Department of Defense or its contractors, fully adhering to DoD standards. All work must meet stringent government specifications for durability, identification, and traceability, ensuring items are properly prepared for storage, shipment, and inventory management within military supply chains. The requirement is structured as a subcontract under NAICS code 385110, with responses due by August 4, 2026, following a posting date of July 29, 2026. The performance location and specific agency office details are not provided, but the contracting organization is identified as Construction & Equipment MRO SVC I under the Department of Defense, indicating the scope is aligned with maintenance, repair, and overhaul operations for military equipment. All submitted solutions must include accurate barcode labeling that integrates with DOD logistics systems, and compliance with federal and defense regulations is mandatory.

POSTED

DEADLINE

Repair Parts Supply (Non-Expendable)The contract entails the supply of non-expendable repair parts to support Department of Defense maintenance, repair, and overhaul operations, with strict requirements for full traceability of all components throughout the supply chain. All provided parts must meet rigorous compliance standards for shipment and logistics reporting, ensuring accurate documentation and accountability at every stage from procurement to delivery. The scope is focused on sustaining critical military equipment through reliable, high-integrity replacement components that adhere to defense-specific quality and operational specifications. The solicitation is structured as a subcontract under NAICS code 423830 and is administered by the Construction & Equipment MRO Service I organization within the Department of Defense. Although the solicitation number and point of contact details are not provided, the response deadline is set for August 4, 2026, with the announcement posted on July 29, 2026. Performance is expected to support DoD operations globally, with no specific location designated for place of performance, indicating a potential multi-site or worldwide fulfillment requirement. All participants must ensure full compliance with defense logistics protocols, including reporting mechanisms and traceability systems, to maintain mission readiness and supply chain integrity.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Industrial Damper Supply (Flue Dampers)The contract involves the supply of industrial flue dampers that must comply with military specifications, ensuring robust performance and reliability in defense applications. All units require full traceability throughout manufacturing and delivery, along with secure packaging and precise labeling that meets strict military standards. First Article Testing is mandatory to verify conformance before production, validating design, materials, and functionality against required specifications. The work is governed under NAICS code 332999 for other fabricated metal product manufacturing and is structured as a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program. Responses are due by August 4, 2026, with the solicitation publicly accessible through the DLA DIBBS portal for qualified suppliers.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E9-26-Q-0635

The contract specifies the procurement of 17,500 units of ear muffs with NSN 4240-01-469-8738 under solicitation SPE8E9-26-Q-0635, with a firm delivery deadline of 60 days after award. All supplies must comply with DLA packaging requirements detailed in RP001 and MIL-STD-2073-1E, including specific packaging methods, containment materials, and unit container specifications. The items are to be delivered FOB origin and inspected and accepted at destination, with no tolerance for quantity variance. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries or sensors, and any permitted mercury-containing devices must include a secondary containment barrier in accordance with NAVSEA 5100-003D. Packaging and marking must follow MIL-STD-129 without special codes, and palletization must adhere to the DLA RP001 standard. Hazardous material shipping procedures are governed by DLAD PROC NOTE C19 and C20, with shipments directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The government’s material need date is set for September 30, 2026, and the point of contact for inquiries is Luis Marrero, with the solicitation response deadline on August 5, 2026.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE