Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Compliance and Labeling

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires strict adherence to OSHA Hazard Communication Standard and DFARS 252.223-7001, mandating proper hazard communication, labeling, and submission of Material Safety Data Sheets for all regulated materials incorporated into components. All suppliers must ensure that chemical hazards are clearly identified and documented in compliance with federal safety regulations, with accurate and timely MSDS documentation provided for any hazardous substances used in manufacturing or assembly processes. Compliance is non-negotiable and applies to every stage of component production and delivery. The contract is issued under NAICS code 541620 by the Department of Defense’s LAND SUPPLIER OPNS VEHICLE SPT office, with performance required at Williamsburg, Virginia, 23185-5831. It is structured as a subcontract with a response deadline of August 20, 2026, and was posted on August 9, 2026. All parties must meet regulatory obligations without exception, and failure to comply with labeling or documentation requirements may constitute a material breach of contract terms. The solicitation can be accessed via the DIBBS portal for full procedural details and submission guidelines.

General Info

Must comply with OSHA and DFARS hazard communication, labeling, and MSDS requirements for all regulated materials in Williamsburg, VA.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

WILLIAMSBURG, VA, 23185-5831, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure compliance with OSHA HCS and DFARS 252.223-7001, including hazard communication, labeling, and submission of MSDS for any regulated materials used in components.

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance & LabelingThe contract requires the preparation and submission of globally harmonized system–compliant hazard warning labels and safety data sheets for hazardous materials, ensuring full alignment with OSHA’s Hazard Communication Standard. All deliverables must meet regulatory requirements to accurately communicate chemical hazards to workers and downstream users, with strict adherence to formatting, content, and language standards mandated by 29 CFR 1910.1200. The work is classified as a subcontract under NAICS code 541620, indicating it involves scientific and technical consulting services related to environmental compliance and safety documentation. Performance is required at Tracy, California, with a zip code of 95304-5000, and the proposal submission deadline is August 20, 2026. The contract was posted on August 9, 2026, under the Department of Defense’s Construction & Equipment MRO SVC I procurement office, indicating its application within military or defense-related operations. While no set-aside designation is specified, the solicitation is accessible via the DIBBS platform, and responders must ensure timely and accurate delivery of all GHS-compliant documentation to satisfy federal safety and labeling obligations.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires identification of all hazardous materials utilized in manufacturing or coating operations and the ongoing maintenance of Safety Data Sheets that comply with OSHA regulations as well as Department of Defense federal requirements. Responsibility includes ensuring accurate, up-to-date documentation for every chemical or substance involved in production processes, with strict adherence to federal standards for hazard communication and worker safety. All SDS must be systematically managed, accessible, and aligned with current regulatory frameworks to support compliance during inspections and operational audits. Performance is based in Tracy, California, with a response deadline of August 17, 2026, and the contract is classified as a subcontract under NAICS code 541620, which pertains to environmental consulting services. The procuring entity is the ASC Commodities Division within the Department of Defense, indicating the work supports defense-related manufacturing or supply chain activities. Full compliance with both OSHA and DoD mandates is non-negotiable, and the contractor must demonstrate proven capability in hazardous materials management, documentation accuracy, and regulatory vigilance to meet the obligations of this engagement.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data ManagementThe contract requires the identification and documentation of hazardous materials contained in delivered items, with a focus on ensuring full compliance with OSHA regulations. This includes the accurate preparation of Safety Data Sheets for each hazardous substance and the application of standardized hazard labeling that meets federal safety standards. The work demands precision in material analysis, thorough recordkeeping, and strict adherence to regulatory requirements to support safe handling, storage, and transportation of hazardous goods within the supply chain. The contract is a subcontract under the NAICS code 541620, issued by the Department of Defense through DLA DIST SAN JOAQUIN, with performance required at a facility in Tracy, California, zip code 95304-5000. It was posted on August 9, 2026, and responses must be submitted by August 20, 2026. There is no set-aside designation, and the opportunity is open to qualified subcontractors capable of delivering compliant hazardous materials documentation and labeling services. The procurement is conducted through the DIBBS platform, and all technical and regulatory obligations must be fulfilled to meet Department of Defense safety and compliance expectations.

DLA DIST SAN JOAQUIN

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Labeling and Safety DataThe contract requires the provision of hazard labels and Material Safety Data Sheets for all hazardous components in compliance with OSHA 29 CFR 1910.1200, ensuring proper identification and handling of dangerous materials. This subcontract is issued under the NAICS code 541620 and is managed by the Electrical Devices Division within the Department of Defense, with performance required at Tracy, California, zip code 95304-5000. The solicitation was posted on August 9, 2026, and responses must be submitted by August 20, 2026, to meet the deadline. All materials and documentation must adhere strictly to federal safety regulations to support safe operations and regulatory compliance across the supply chain.

ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

DLA Packaging and Marking Compliance SupportThe contract seeks advisory or fulfillment services to ensure full compliance with DLA packaging standards for medical supply shipments, specifically focusing on RP001 packaging requirements, unit container sealing, and labeling in accordance with Medical Marking Standard No. 1. These services are critical to maintaining regulatory adherence and operational readiness for medical logistics within the Department of Defense supply chain. The work involves precise execution of packaging protocols and marking procedures to guarantee accurate identification, traceability, and handling of medical materiel throughout distribution channels. This is a subcontract opportunity under NAICS code 541620, with a response deadline of August 17, 2026, and a posted date of August 9, 2026. Performance is required at the designated location in Jacksonville with ZIP code 28545-6070. The contracting entity is the Medical Supply Chain FSH under the Department of Defense, and while no specific set-aside status is indicated, interested parties must adhere to all technical and compliance specifications outlined in the referenced standards to qualify for award.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling SupportThe contract requires comprehensive hazard communication compliance services for DLA medical supply shipments, specifically focusing on the creation of accurate hazard labels, preparation of material safety data sheets, and proper regulatory classification under OSHA’s 29 CFR 1910.1200 standard. All work must align with federal requirements to ensure safe handling, storage, and transportation of hazardous materials within the medical supply chain. The services are critical to maintaining regulatory adherence and safeguarding personnel involved in the handling and distribution of these materials. This subcontract is issued under NAICS code 541620 and is part of the Department of Defense’s Medical Supply Chain FSH initiative. The performance location is designated as Jacksonville with a ZIP code of 28545-6070. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026. The contract details are accessible through the DIBBS platform under reference number SPE2DH26T5884. No specific set-aside or organizational type is indicated, and the point of contact information is not provided in the solicitation.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Labeling & ComplianceThis contract requires the application and verification of hazard warning labels on packaging for any components or systems that contain hazardous substances, ensuring full compliance with the DFARS clause 252.223-7001. The work involves precise labeling procedures to communicate risks accurately and meet federal defense standards, with all activities centered around the designated place of performance in New Cumberland, Pennsylvania, under the oversight of the Department of Defense’s Active Devices Division. The solicitation is structured as a subcontract and is exclusively reserved for small businesses through a total small business set-aside, as defined by the SBA and FAR 19.5, with the NAICS code 541620 indicating that the work falls under professional, scientific, and technical services related to environmental compliance and safety. Responses must be submitted by August 20, 2026, following the posting date of August 9, 2026, with all efforts focused on meeting rigorous regulatory requirements for hazard communication in defense-related packaging.

ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

Hazardous Material Compliance and LabelingThe contract titled Hazardous Material Compliance and Labeling requires the provision of specialized services to ensure full adherence to federal and military regulations governing the labeling of hazardous materials. Specifically, the contractor must comply with DFARS 252.223-7001, OSHA 1910.1200, and MIL-STD-129, which mandate accurate hazard communication, standardized labeling formats, and uniform packaging identification for defense-related shipments. The work is performance-based and must be executed to support the Department of Defense’s logistics infrastructure, with all activities centered at the designated place of performance in Tracy, California, zip code 95304-5000. The subcontract is classified under NAICS code 541620, indicating it involves management consulting services related to compliance and operational safety standards. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is managed by the Land Supply Chain organization within the Department of Defense. While no set-aside designation or point of contact is specified, the contract expects the contractor to deliver precise, auditable labeling systems that meet stringent military and occupational safety requirements. The services are critical to maintaining regulatory compliance across the supply chain, preventing mislabeling risks, and ensuring the safe handling, transportation, and storage of hazardous substances within defense operations.履约必须符合所有适用法规的字面要求和实质意图，确保标签内容完整、清晰、持久且在各种环境条件下保持可读性。

LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires identification of hazardous components and application of OSHA-compliant hazard communication labels in accordance with 29 CFR 1910.1200, or alternative regulatory frameworks such as FIFRA or FFDCA when applicable for government approval. This effort is critical to ensuring proper labeling of hazardous materials to meet federal safety and compliance standards, particularly for materials used in defense-related construction and equipment maintenance, repair, and overhaul activities. All labeling must clearly communicate chemical hazards, precautionary measures, and required protective actions as mandated by law. The work is positioned as a subcontract under NAICS code 541620, indicating a focus on environmental consulting and related technical services. The performance location is specified as New Cumberland, Pennsylvania, with a postal code of 17070-5002, and the contracting agency is the Department of Defense under the Construction & Equipment MRO SVC I procurement category. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and all submissions must be made through the DIBBS system using the provided link. Compliance with applicable federal regulations and accurate documentation of labeling procedures are essential to fulfill contract obligations.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires the provision and management of Safety Data Sheets (SDS) and full compliance with hazardous materials regulations under OSHA's Hazard Communication Standard (29 CFR 1910.1200) and Federal Standard No. 313, ensuring all hazardous substances are properly documented, labeled, and handled in accordance with federal requirements. The contractor must also navigate and apply relevant regulatory exemptions where applicable to maintain compliance without unnecessary administrative burden. This subcontracts work under the NAICS code 541620, which pertains to environmental consulting services, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office. Performance is centered at Fort Stewart, Georgia, with a zip code of 31314-5185, indicating the operational focus on military medical supply operations. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026, with no set-aside designation specified, leaving the opportunity open to all eligible vendors.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and SDS Documentation

ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

Hazardous and Radioactive Materials ComplianceThe contract requires comprehensive management of hazardous and radioactive materials employed in manufacturing and packaging operations, including precise identification, safe handling procedures, and proper labeling in accordance with established regulatory standards. A critical component involves the preparation and maintenance of Safety Data Sheets to ensure regulatory compliance and worker safety, alongside adherence to MIL-STD-129 for the packaging, marking, and documentation of hazardous shipments. All activities must align with strict Department of Defense protocols to ensure the secure and lawful transportation and use of dangerous substances. The work is to be performed at Robins Air Force Base, Georgia, 31098-1887, under a subcontract solicitation issued by the Department of Defense through the Warner Robins office. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 541620, which categorizes scientific and technical consulting services. Contractors must demonstrate proven expertise in hazardous materials handling and DOD compliance to meet the requirements, with no set-aside provisions specified for small or disadvantaged businesses.

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Transportation and Delivery Logistics (FOB Destination)The contract requires the arrangement and execution of shipment for 29 units to a DLA destination under FOB Destination terms, meaning all transportation risks, costs, and responsibilities fall on the contractor until the goods reach the specified delivery point in Texarkana, Texas, with ZIP code 75507-5000. The contractor is fully accountable for ensuring timely, secure, and compliant delivery, including any potential delays, damage, or loss during transit. This is a subcontract under NAICS code 484220, categorized as a transportation and delivery logistics service, with the Department of Defense through its LAND SUPPLIER OPNS VEHICLE SPT office overseeing the requirement. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with all submissions required to meet the terms outlined on the DIBBS platform via the provided link. Performance must align with FOB Destination stipulations, which dictate title and risk transfer only upon physical arrival at the designated location. The contracting entity operates under federal defense logistics protocols, and the contractor must demonstrate full compliance with all federal shipping standards, documentation requirements, and delivery timelines to fulfill contractual obligations successfully.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA Hazardous Communications Standard and DFARS clause 252.223-7001 for the proper labeling, documentation, and management of hazardous materials. All hazardous substances must be accurately labeled in accordance with GHS standards, and complete Safety Data Sheets must be prepared, maintained, and submitted as required. The work involves ensuring that all material handling, storage, and transportation practices meet federal safety and defense acquisition regulations, with a focus on transparency, traceability, and regulatory adherence. Failure to meet these requirements may result in non-compliance penalties or contract termination. Performance is to be carried out at the designated location in Texarkana, Texas, with a response deadline of August 20, 2026. This is a subcontract under NAICS code 541690, indicating it relates to other scientific and technical consulting services. The contracting entity operates under the Department of Defense, specifically the Land Supplier Operations Vehicle Support division, and the work is governed by federal defense supply chain protocols. The contractor must be prepared to demonstrate continuous compliance throughout the contract term and provide all necessary documentation upon request.

Other Scientific and Technical Consulting Services

POSTED

about 8 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract involves providing quality assurance and inspection services aligned with MIL-STD-1916 or ASQ Z1.4 standards to ensure product conformance, along with the preparation of a Certificate of Quality Compliance to verify that delivered items meet required specifications. Support is also included for origin acceptance activities, ensuring that the source and authenticity of materials or components are validated in accordance with defense procurement protocols. The work is designated as a subcontract under NAICS code 541380 and is associated with the Department of Defense’s Land Supplier Operations Vehicle Support organization, with performance required at the designated location in Texarkana, Texas, zip code 75507-5000. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with all technical and contractual obligations centered on delivering certified quality documentation and inspection support for military equipment and supply chains.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

Packaging, Preservation, and Marking (MIL-STD-129 Compliance)The contract requires full compliance with military packaging, preservation, labeling, and palletization standards, specifically MIL-STD-129, ASTM D3951, and RP001, ensuring all items are prepared for secure storage, transportation, and handling within DoD logistics systems. All work must adhere strictly to these specifications to guarantee uniformity, durability, and traceability of military-supplied materiel. The effort is structured as a subcontract under NAICS code 561910, indicating it relates to support services for transportation and logistics operations, and performance is designated for the location of Texarkana with a zip code of 75507-5000. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026, under the oversight of the Department of Defense’s Land Supplier Operations Vehicle Support division. While no specific set-aside status or point of contact is provided, the requirement is tied to essential logistics infrastructure supporting military supply chains. Interested parties must ensure their capabilities meet the rigorous standards outlined and deliver end-to-end packaging and marking solutions aligned with federal and military logistics protocols, with no deviations permitted without explicit authorization.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Precision Metal Casting and MachiningThe contract entails the precise manufacturing of an auxiliary power unit housing through advanced metal casting, machining, and finishing processes, all aligned with strict military specifications and technical drawings. The work must meet exacting quality and performance standards required for defense applications, ensuring structural integrity, dimensional accuracy, and durability under demanding operational conditions. The production will be carried out at the designated place of performance in Texarkana, Texas, with the delivered product expected to conform fully to military-grade requirements. This is a subcontract opportunity under the NAICS code 332721 for metal casting, issued by the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT organization. The solicitation was posted on August 9, 2026, with a strict response deadline of August 20, 2026, giving potential bidders a limited window to submit proposals. While no set-aside provisions or specific point of contact are detailed, interested parties must access the official DIBBS portal through the provided link to obtain full solicitation documents and complete the submission process. Any offeror must demonstrate proven capability in high-precision metal fabrication for defense-related components.

Precision Turned Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Cybersecurity and Covered Defense Information (CDI) Safeguarding

Computer Systems Design Services

POSTED

about 8 hours ago

DEADLINE

Logistics and FOB Destination Delivery Coordination

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

Packaging, Marking, and Hazard Labeling Compliance

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Manufacturing of Access Cover (NSN: 5340016963168)

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Small Business Subcontracting Support (Administrative)The contract provides administrative and compliance support for postaward small business program reporting under FAR 52.219-28, focusing on the accurate management and submission of joint venture disclosures for businesses seeking or maintaining WOSB, EDWOSB, SDVOSB, or HUBZone status. This support ensures adherence to federal requirements governing small business subcontracting obligations, including documentation, reporting timelines, and regulatory alignment with SBA guidelines. The effort is critical to maintaining eligibility and compliance for federal contract set-asides designated for small businesses. The solicitation is a total small business set-aside under FAR 19.5, with a NAICS code of 541611, indicating the work involves management consulting services tailored to administrative and compliance functions. It is issued by the Department of Defense under the Land Supplier Operations Vehicle Support office, with performance required at New Cumberland, Pennsylvania, 17070-5002. Responses are due by August 20, 2026, and the opportunity was posted on August 9, 2026, targeting qualified small business contractors with expertise in federal regulatory reporting and subcontracting oversight.

Administrative Management and General Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

Barcoding and Shipment Marking ServicesThe contract involves providing barcoding and shipment marking services for Defense Logistics Agency shipments in strict compliance with MIL-STD-129 requirements, utilizing Code 39, Code 128, and PDF417 2D barcodes with the special marking code ZZ. This subcontract is designated as a Total Small Business Set-Aside under the SBA program, ensuring exclusive eligibility for small businesses, and is classified under NAICS code 518210, which pertains to data processing, hosting, and related services. The work is to be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the solicitation closing date is August 20, 2026, with the opportunity posted on August 9, 2026. The performing organization must be prepared to meet all military standards for labeling, coding, and marking of shipment containers to ensure accurate and efficient logistics tracking throughout the Department of Defense supply chain.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract seeks specialized packaging, preservation, and labeling services for hazardous material shipments, strictly adhering to DFARS 252.223-7001, 29 CFR 1910.1200, and MIL-STD-2073-1E standards to ensure full regulatory compliance and safe handling throughout the transportation lifecycle. All work must be performed in accordance with rigorous defense and occupational safety requirements, with an emphasis on proper containment, hazard communication, durable labeling, and long-term preservation techniques tailored to sensitive military cargo. The scope demands precise execution by qualified vendors capable of meeting the unique demands of Department of Defense logistics while maintaining complete traceability and documentation integrity. This is a small business set-aside subcontract under NAICS code 561990, open exclusively to SBA-certified small businesses with a response deadline of August 20, 2026. Performance is required at the facility located in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and is managed by the Land Supplier Operations Vehicle Support organization under the Department of Defense. The opportunity is posted on the DIBBS platform with the solicitation number SPE7L326T169U, and interested parties must submit proposals prior to the deadline to be considered for award, with no alternative set-aside options available beyond the total small business restriction.

All Other Support Services

POSTED

about 8 hours ago

DEADLINE