Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hazardous Materials Compliance & Labeling Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541620
New
SLED
Environmental Impact and Permitting Services
Lower Loup Natural Resources District

POSTED

about 21 hours ago

DEADLINE

in 20 days
NAICS: 541620
New
SLED
Hydrogeologic Study and Groundwater Modeling
Lower Loup Natural Resources District

POSTED

about 21 hours ago

DEADLINE

in 20 days
NAICS: 541620
New
SLED
Monroe Area Recharge Project
Solicitation # RFP-2026-0001
The Lower Loup Natural Resources District is seeking a qualified professional engineering consultant for the Monroe Area Recharge Project in southwestern Platte County, Nebraska. The project aims to design and implement a system to divert water from the Loup Power Canal into identified wetlands and drainages to facilitate groundwater recharge and baseflow retiming. The scope of work includes an existing conditions assessment, site identification and prioritization, conceptual and final design, permitting support, and the development of a final hydrologic modeling report and an operations and maintenance plan. All designs must adhere to Federal Energy Regulatory Commission requirements, including specific mandates for minimum flow in bypass reaches, run-of-canal operations, water temperature limits of 93 degrees Fahrenheit, and a maximum diversion of 2,000 cfs between March 1 and June 30. Proposals are due by 5:00 pm on October 2, 2026, and must consist of four hard copies and one digital version delivered to the district office in Ord, Nebraska. Selection will be based on technical qualifications, a proven track record with similar water retiming projects, the proposed approach, and cost effectiveness. Work is scheduled to commence by December 1, 2026, with a timeline to be mutually agreed upon following the award. The contract requires the consultant to be fully insured for general liability and workers compensation. Payment will be processed on a monthly basis, subject to a 10 percent retainage that will be released upon project completion.
Lower Loup Natural Resources District

POSTED

about 21 hours ago

DEADLINE

in 20 days
NAICS: 541620
New
SLED
Environmental Sustainability and Resilience Analysis
City Plan

POSTED

about 22 hours ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Regulatory Permitting & Environmental Compliance
County of Cleveland

POSTED

about 22 hours ago

DEADLINE

in 27 days
NAICS: 541620
New
SLED
Environmental Assessment & Permitting Specialist
City of South Fulton

POSTED

about 23 hours ago

DEADLINE

in about 2 months
NAICS: 541620
New
SLED
DPH | As-Needed Radiation Safety Consulting Svc
Solicitation # SFGOV-0000011986
The San Francisco Department of Public Health is seeking proposals from experienced firms to provide qualified staff to serve as a Radiation Safety Officer. The selected provider will ensure the safe and compliant use of ionizing radiation by managing regulatory compliance, developing nuclear medicine programs, conducting audits, overseeing personnel dosimetry, and providing consultation during regulatory inspections. These services are critical for maintaining current compliance and supporting the growth of future radiation-producing services. The solicitation process began on September 11, 2026, with a proposal submission deadline of 2:00 PM PT on October 14, 2026. An award announcement is expected by November 13, 2026, with an estimated contract start date of March 1, 2027. Interested proposers can coordinate through the primary point of contact, Lisa Lui, and refer to solicitation number SFGOV-0000011986 for further details.
San Francisco Department of Public Health

POSTED

about 24 hours ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Environmental Technical Consulting
MS DEPT ENVIRONMENTAL QUALITY

POSTED

1 day ago

DEADLINE

in 30 days
NAICS: 541620
New
SLED
Lead Compliance Planning
County of Kern

POSTED

1 day ago

DEADLINE

in 18 days
NAICS: 541620
New
SLED
Energy Efficiency Consulting and Certification
California Department of General Services

POSTED

1 day ago

DEADLINE

in 16 days
NAICS: 541620
New
International
Regulatory Health Compliance Consulting
South Central Ambulance Service Nhs Foundation Trust

POSTED

1 day ago

DEADLINE

in 27 days
NAICS: 541620
New
International
Asbestos Surveying & Hazardous Material Management
Frinton & Walton Town Council

POSTED

1 day ago

DEADLINE

in about 2 months

AI Contract Overview

Show more

The contract requires comprehensive identification, documentation, and labeling of hazardous materials utilized in manufacturing and packaging processes, with strict adherence to federal and military regulatory standards. This includes the generation and maintenance of Safety Data Sheets (SDS) to ensure accurate communication of chemical hazards, handling procedures, and emergency response protocols. All activities must align with established compliance frameworks to safeguard personnel, operations, and the environment, particularly within the context of defense-related manufacturing. Performance is mandated at the New Cumberland location with a zip code of 17070-5002, and the work is structured as a subcontract under NAICS code 541620, which corresponds to management, scientific, and technical consulting services. The solicitation was posted on July 14, 2026, with responses due by July 22, 2026, and is managed by the ASC Supplier Operations OEM Division within the Department of Defense. Contractors must demonstrate proven expertise in hazardous materials compliance, labelling accuracy, and SDS certification to meet the stringent requirements of military supply chain operations.

General Info

Hazardous materials compliance, SDS management, and labeling required at New Cumberland under DoD subcontract.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-26-T-287M.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STOP, LANDING GEAR

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Identification, documentation, and labeling of hazardous materials used in manufacturing or packaging, including SDS generation and compliance with federal and military standards.

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336340
New
DIBBS
Supply of Motor Brake Linings (NSN 3040000553504)
Motor Vehicle Brake System Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334513
New
DIBBS
Supply of Velocity Transducer (NSN 6680016026138)
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335121
New
DIBBS
Supply of Electric Floodlights (NSN 6220-01-273-7424)
Residential Electric Lighting Fixture Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 335132
New
DIBBS
FLOODLIGHT, ELECTRIC
Solicitation # SPE4A5-26-Q-0746
Solicitation SPE4A5-26-Q-0746 is a request for quotation issued by DLA Aviation for the procurement of 12,000 electric floodlights, identified by NSN 6220-01-273-7424. This firm fixed price requirement specifies a delivery timeline of 341 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The items are identified as commercial products and critical application items, with approved sources including Ontic Engineering and Manufacturing and Grimes Aerospace Company. The award will be based on a best value determination, weighing price, quoted delivery, and past performance, with a heavy emphasis on SPRS quality and delivery assessments. Technical compliance requires adherence to SAE AS9100 quality standards, CMMC Level 2 self-assessment, and specific packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The solicitation also incorporates various federal regulations regarding supply chain security, the Buy American Act, and prohibitions on inverted domestic corporations.
Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
SETSCREW
Solicitation # SPE4A5-26-T-406H
Solicitation SPE4A5-26-T-406H is a fixed-price request for quotations issued by the DLA Aviation ASC Supplier Oper OEM Division for the procurement of two set screws under NSN 5305015034425. This is a source-controlled, critical application item identified as a commercial product. Acquisition is strictly limited to approved sources specified on the source control drawing, specifically referencing Breeze-Eastern Corp and SPS Technologies, LLC. Offerors not currently cited as approved sources must obtain and submit OEM source approval and a technical data package to be eligible for award. The items must be delivered FOB Origin to the USCG Aviation Logistics Center in Elizabeth City, North Carolina, within five days of order. The contract mandates strict adherence to quality and marking standards, including MIL-STD-130N for bare item marking and MIL-STD-129 for packaging labels. Packaging must comply with ASTM D3951 and RP001, with the DLA Master List of Technical and Quality Requirements taking precedence. Quality assurance will be conducted via destination inspection using sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and the prohibition of hexavalent chromium.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334513
New
DIBBS
TRANSDUCER, VELOCITY
Solicitation # SPE4A5-26-T-334S
Solicitation SPE4A5-26-T-334S is a request for quotation issued by the Defense Logistics Agency for the procurement of one velocity transducer, also identified as a velocity angular transducer, with NSN 6680016026138 and part number 0002541. The item is to be delivered to the Naval Construction Group One in Port Hueneme, California, with a required delivery date of July 30, 2026, and a delivery window of 20 days after award. The shipment is designated as FOB Origin, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Key regulatory requirements include compliance with the Buy American Act, DFARS 252.204-7012 for safeguarding covered defense information, and the use of the Wide Area WorkFlow system for electronic invoicing and payment. Item Unique Identification is not required for this procurement.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334514
New
DIBBS
LASER PINED MOD ND
Solicitation # SPE4A5-26-T-406A
Solicitation SPE4A5-26-T-406A, issued by DLA Aviation's ASC Supplier Oper OEM Division, is a request for quotations for 12 units of Laser Pined Mod ND, identified by NSN 4920015542660. The procurement falls under NAICS code 334514 and requires delivery within 98 days of award, with an original required delivery date of September 2, 2026. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will take place at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to DLA Master List technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951, though DLA requirements take precedence. Quality assurance involves sampling methods per MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Additionally, the contractor must meet CMMC Level 2 self-assessment standards and comply with DFARS 252.204-7012 regarding the safeguarding of covered defense information. Payment processing is to be handled electronically through the Wide Area WorkFlow system.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 333611
New
DIBBS
VANE ASSY, COMPR 4TH
Solicitation # SPE4A5-26-T-404W
Solicitation SPE4A5-26-T-404W is a request for quotations issued by DLA Aviation for the procurement of six units of Vane Assy, Compr 4th, identified by NSN 2835005557595 and Rolls-Royce part number 6876104. This is a Foreign Military Sales requirement for Taiwan, with the final delivery destination being the General Depot of Naval Supplies in Kaohsiung City. The required delivery date is September 2, 2026, with a delivery window of five days after order. Shipping terms are FOB Origin, and both inspection and acceptance will occur at the origin. The contract mandates strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-130N(1) for identification marking. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance requires sampling per MIL-STD-1916 or ASQ H1331, with a requirement of zero non-conformances for acceptance. Additionally, the contractor must ensure that no mercury or mercury-containing compounds are intentionally added to the hardware, except where functionally required. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the requirement for offerors to be registered in the System for Award Management. Compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001 is required for quotes exceeding the micro-purchase threshold. Cybersecurity protections are enforced via DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted through the DLA Internet Bid Board System.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
SHUTTLE, CABLE TENSI
Solicitation # SPE4A5-26-T-404M
Solicitation SPE4A5-26-T-404M is a fixed-price request for the procurement of one Cable Tensioner Shuttle, identified by NSN 1560-00-122-1689 and Sikorsky Aircraft Corporation part number 65301-03083-041. This is a critical application item intended for the Government of Israel Ministry of Defense. The item is manufactured via a metal casting process requiring specific tooling. Delivery is required within five days of award, with an original required delivery date of September 8, 2026. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to quality and technical standards, including ISO 9001:2015 compliance for manufacturers. Sikorsky Corporation is permitted to use an alternate sampling plan, QAP 1201, provided it meets ASQ H331 or MIL-STD-1916 standards. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Additional requirements include CMMC Level 2 self-assessment, physical bare item marking, and compliance with the Buy American Act and Berry Amendment. All payment requests and receiving reports must be processed through the Wide Area WorkFlow system.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 333613
New
DIBBS
LINING, MOTOR BRAKE
Solicitation # SPE4A5-26-T-370H
Solicitation SPE4A5-26-T-370H is a fixed-price request for the procurement of 48 units of motor brake lining, identified by NSN 3040-00-055-3504. Issued by DLA Aviation under NAICS code 333613, the contract requires delivery within 170 days after the award, with a target ship date of February 12, 2027. Shipping is established as FOB Origin, with both inspection and acceptance occurring at the destination in San Diego, California. The procurement mandates strict adherence to quality and material standards, specifically requiring that all supplied items be entirely free of asbestos. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with the Buy American Act and Berry Amendment regarding domestic material restrictions.
Mechanical Power Transmission Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONAL PI
Solicitation # SPE4A5-26-T-406J
Solicitation SPE4A5-26-T-406J, issued by DLA Aviation, is for the procurement of three motional pickup transducers, identified by NSN 6695010516478. This critical application item is classified as a commercial product under NAICS code 334519. The delivery schedule is set for 307 days after award, with a required delivery date of July 16, 2027. Shipping is established as FOB Origin and will be delivered to the DLA Distribution Depot at Hill AFB, Utah, under the First Destination Transportation program. The contract mandates strict quality and technical compliance, requiring sampling per MIL-STD-1916 or ASQ H1331 and packaging according to MIL-STD-2073-1E and MIL-STD-129. Inspection and acceptance will occur at the destination. Key regulatory requirements include a CMMC Level 2 Self-Assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. The procurement also incorporates various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and the prohibition of certain telecommunications equipment.
Other Measuring and Controlling Device Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334512
New
DIBBS
INDICATOR, TEMPERATU
Solicitation # SPE4A5-26-T-405X
Solicitation SPE4A5-26-T-405X is a Request for Quotations issued by the DLA Aviation ASC Supplier Operations OEM Division for the procurement of one temperature indicator, identified by NSN 6685-01-652-3534. This item is classified as a Commercial Off the Shelf critical application item, with referenced part numbers from Aerco International, Inc. and Eurotherm Controls Inc. The required delivery date is August 28, 2026, with a delivery timeframe of 20 days after award. Shipping is FOB Origin, and the item is to be delivered to the USS America LHA 6 at FPO AP 96660. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, specifically noting that the item is a delicate instrument. A critical restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required. Quality and technical requirements are governed by the DLA Master List, including specific standards for source approval and measuring equipment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses regarding the Buy American Act, safeguarding covered defense information, and the prohibition of trafficking in persons.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

1 day ago

DEADLINE

in 4 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS