Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Compliance and Labeling Services

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of Safety Data Sheets and the application of hazard warning labels for hazardous materials, ensuring full compliance with DFARS 252.223-7001 and MIL-STD-129 standards. This subcontract is focused on accurate documentation and labeling to meet Department of Defense safety and transport requirements, with performance centered at Albany, Georgia, 31704-0325. The work must align with federal regulations governing the handling and identification of dangerous goods in military supply chains, maintaining consistency in hazard communication across all distributed materials. Responses are due by August 10, 2026, and the opportunity is classified under NAICS code 541690 for other scientific and technical consulting services. The solicitation is managed by the Land Supplier Operations Vehicle Support unit under the Department of Defense, with no specific set-aside designation. Contractors must be prepared to deliver compliant SDS documentation and properly formatted hazard labels that meet military specifications, with all deliverables tied directly to the performance location in Albany. The contract is accessible via the DIBBS platform for qualified subcontractors seeking to support defense logistics with safety-compliant hazardous material services.

General Info

Provide compliant SDS and hazard labels for hazardous materials in Albany, Georgia, per DFARS and MIL-STD-129.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

ALBANY, GA, 31704-0325, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide Safety Data Sheets (SDS) and apply hazard warning labels in compliance with DFARS 252.223-7001 and MIL-STD-129 for hazardous materials.

Similar Contracts

Same NAICS industry code

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # C2305

The Elsinore Valley Municipal Water District (EVMWD) is seeking professional design, bidding support, and engineering services to replace the existing Corydon well with a new municipal groundwater production well on the same site, utilizing existing transmission infrastructure to meet growing water demand. The project is funded through a combination of district funds and a Department of the Interior Bureau of Reclamation WaterSMART Planning and Project Design Grant, which imposes federal compliance requirements including Buy America provisions, the use of the Treasury’s ASAP payment system, and adherence to whistleblower protections and grant reporting obligations. The scope of work is divided into two phases: Phase 1 includes civil site design, technical specifications, line-bid items for drilling and abandonment of the existing well, along with full-time on-site construction management and bidding assistance; Phase 2 covers architectural, structural, mechanical, electrical, and instrumentation and controls design for equipping, testing, and commissioning the new well, including continued engineering support during construction. Deliverables require signed and stamped plans, comprehensive specifications, permit completions, an engineer’s cost opinion, and record drawings. The solicitation emphasizes a performance-based evaluation with weightings for relevant qualifications (25%), technical approach (25%), schedule and risk management (20%), innovation (10%), cost (10%), and overall proposal quality (10%), with award based on demonstrated competence rather than lowest price. Respondents must be a qualified firm or team capable of delivering hydrology/hydraulic modeling, structural and electrical engineering, geotechnical investigations, and utility locating services under NAICS codes 541690, 541330, 541380, and 561990. The contract requires strict compliance with federal and state regulations, including Riverside County and California State Water Resources Control Board standards, and adherence to Executive Order N-6-22, the Build America Act, and 2 CFR Part 184 for domestic material sourcing. All proposers must submit mandatory certifications including non-collusion, non-debarment, lobbying disclosures, American Iron and Steel compliance, and conflict of interest disclosures via Attachment 2, along with detailed information on Disadvantaged, Minority, and Women Business Enterprises (DBE/MBE/WBE) subcontractors. Insurance requirements mandate commercial general liability coverage of $2 million per occurrence and $4 million aggregate, $1 million in umbrella and auto liability, and $2 million in workers’ compensation coverage. The contractor must register with California

TKE Engineering, Inc.

POSTED

about 6 hours ago

DEADLINE

Grain Monitoring Program

Solicitation # T8080-260021

The Grain Monitoring Program, sponsored by the Department of Transport under the Government of Canada, aims to deliver a comprehensive analysis of the grain supply chain’s performance through the development of standardized qualitative and quantitative indicators. This initiative will generate time series data to assess the efficiency and effectiveness of key stakeholders including grain producers, shippers, railway operators, and port authorities, drawing on established models like those available at grainmonitor.ca. The program seeks to produce regular, transparent public reports that track performance trends and structural shifts over time, ensuring accountability and informing policy and operational decisions across the sector. To support this effort, the program will actively engage with both government and industry stakeholders to facilitate the consistent collection, sharing, and validation of critical data. Building collaborative relationships is essential to ensure data accuracy, timeliness, and relevance. The solicitation, issued under reference number T8080-260021 and posted on August 7, 2026, requires responses by September 8, 2026, and is open to qualified entities capable of delivering analytical rigor and public reporting capabilities. Primary contact for inquiries is Cathrine Louise Curtis, Contracting Authority, reachable through the provided email and phone number. The work is to be performed across Canada, reflecting the national scope of the grain transportation network.

Department of Transport

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Research & Policy AnalysisThe contract requires the performance of comprehensive research and policy analysis focused on education policy, funding models, and the legislative impacts affecting public education, with the explicit goal of informing the advocacy positions and strategic decisions of the Dekalb County School District. The work must provide actionable insights that align with the district’s objectives, leveraging data-driven analysis to support policy development and decision-making at the local level. The deliverables are expected to contribute directly to the district’s ability to respond effectively to evolving educational landscapes and to advocate for resources and reforms that benefit students and stakeholders. This is a subcontract opportunity under NAICS code 541690, which covers other scientific and technical consulting services, and the response deadline is August 27, 2026. The solicitation was posted on August 6, 2026, and is available through the Dekalb County School District’s procurement portal. There is no specified set-aside classification, and the place of performance and point of contact details are not provided, indicating that the work may be conducted remotely or at the district’s discretion. Bidders must ensure their proposals demonstrate expertise in education policy research and a clear understanding of Georgia’s educational governance structure.

Dekalb County School District

POSTED

DEADLINE

City of Martenville Space Planning Study Expression of Interest

Solicitation # COM-EOI2026

The City of Martensville is inviting qualified firms to submit Expressions of Interest for a Facilities Needs Assessment and Space Planning Study, identified by solicitation number COM-EOI2026, with a submission deadline of August 21, 2026. The study aims to evaluate current and projected space needs across all municipal operational departments to identify inefficiencies, optimize facility use, and inform long-term capital planning efforts. The work will require detailed analysis of existing infrastructure, future growth projections, and operational requirements to produce actionable recommendations that align with the city’s strategic goals. All proposals must be submitted through the Saskatchewan Public Sector tendering platform, with the primary point of contact for inquiries being Matthew Gruza, reachable via email at mgruza@martensville.ca or phone at 306-931-2166. The project is scoped solely for work within the City of Martensville, Saskatchewan, and there is no set-aside designation for specific business categories. Interested firms are expected to demonstrate relevant experience in municipal facility planning, space optimization, and capital asset assessment, with proposals evaluated based on qualifications, methodology, and capacity to deliver a comprehensive, data-driven study within the required timeframe.

City of Martensville

POSTED

DEADLINE

Toxicity Reduction Evaluation (TRE) SupportThe City of Stockton is seeking technical support to advance efforts in reducing or eliminating toxicants in wastewater effluent through a combination of treatment optimization, pilot testing, and strategic compliance planning. The work will focus on identifying sources of toxicity, evaluating treatment methods to mitigate harmful substances, and developing actionable strategies to ensure regulatory adherence and environmental protection. This subcontract opportunity is open to qualified contractors with expertise in environmental engineering, wastewater treatment, and toxicological assessment to deliver science-driven solutions that improve effluent quality and support long-term sustainability goals. The contract, titled Toxicity Reduction Evaluation (TRE) Support, requires a thorough understanding of environmental regulations and practical experience in on-site testing and process improvement. Proposals must be submitted by September 3, 2026, and the scope of work will be performed in alignment with the City’s objectives to enhance water quality and meet state and federal discharge standards. Although details regarding the physical location of performance and specific funding sources are not provided, the work is intended to directly assist the city in addressing toxicity challenges within its wastewater systems. Contractors are expected to deliver measurable results through data analysis, operational recommendations, and compliance roadmap development.

City of Stockton

POSTED

DEADLINE

STANDARDS OF COVER STUDY - City of Decatur Fire Department

Solicitation # PE-64458-NONST-2027-000000033

The City of Decatur is seeking qualified consulting firms to conduct a comprehensive Standards of Cover (SOC) Study for the Decatur Fire Rescue Department, aligned with CFAI/CPSE methodology and NFPA standards. The study will evaluate the department’s current deployment model, service delivery, operational effectiveness, and community risk through a detailed analysis that includes a Community Risk Assessment, GIS-based response modeling, unit hour utilization, staffing evaluation, and an assessment of apparatus and capital needs. An optional accreditation readiness evaluation may also be included. Firms must demonstrate proven experience in fire service deployment analysis, GIS modeling, and community risk assessment for municipal fire agencies, and are required to submit a proposal detailing their qualifications, proposed methodology, project timeline, team structure, references, and all associated fees. Proposals must be submitted no later than 2:00 p.m. on Tuesday, September 8, 2026, to the City Manager's Office at 509 North McDonough Street, Decatur, Georgia, addressed to Fire Chief Toni Washington. The full Request for Proposals will be posted on the City’s website on August 10, 2026, and submission of a proposal constitutes acceptance of all RFP conditions. The City retains the right to award the contract to the proposer whose submission and subsequent negotiations best serve the City’s interests, and all submissions become public records under the Georgia Open Records Act. Questions and further information should be directed to Fire Chief Toni Washington at (678) 553-6582 or toni.washington@decaturga.com.

City of Decatur

POSTED

DEADLINE

in about 1 month

Quality Control & Close-Out DocumentationThe contract titled Quality Control & Close-Out Documentation is a subcontract under NAICS code 541690 issued by the Georgia Transportation Efficiency Authority, requiring the development and delivery of comprehensive quality control plans and all necessary close-out documentation. This includes as-built drawings, operation and maintenance manuals, warranties, and training materials, ensuring full compliance with project standards and readiness for handover. The work must be completed in accordance with the authority’s specifications, with deliverables designed to support long-term facility operation and regulatory requirements. Responses are due by September 24, 2026, and the opportunity was posted on August 6, 2026. The place of performance and specific location details are not provided, but all work is expected to support Georgia transportation infrastructure projects. There is no set-aside designation indicated, and while the point of contact information is unavailable, interested parties can access further details through the official online portal linked in the posting. Contractors must demonstrate proven capability in producing high-quality documentation packages aligned with transportation sector standards.

Georgia Transportation Efficiency Authority

POSTED

DEADLINE

in about 2 months

Small Business / HUB Subcontracting ParticipationHistorically Underutilized Businesses, including Veteran-Owned, Minority-Owned, Women-Owned, and Disabled Veteran-Owned enterprises, are invited to participate as subcontractors on contracts valued at $100,000 or more under the Texas Department of Transportation’s Small Business / HUB Subcontracting Participation initiative. This opportunity is aligned with NAICS code 541690 and aims to increase the involvement of underrepresented business groups in state-funded projects by providing them with meaningful subcontracting roles. The solicitation is open for submissions until August 20, 2026, with the opportunity posted on August 6, 2026, and is accessible through the Texas SmartBuy portal. Participation is designed to support diversity in contracting and promote economic inclusion, with no specific set-aside designation but a clear focus on HUBs as preferred subcontractors. All performance is expected to occur within Texas under the oversight of the Texas Department of Transportation.

Texas Department of Transportation

POSTED

DEADLINE

Professional Consulting & Technical ServicesThe contract entitled Professional Consulting & Technical Services is a subcontract issued by the Texas Department of Transportation under NAICS code 541690, seeking qualified providers to deliver specialized consulting or technical services that demand skilled, experienced professionals capable of performing in a professional and workmanlike manner aligned with industry standards. The solicitation was posted on August 6, 2026, with responses due by August 20, 2026, and is open to contractors who can demonstrate the capability to meet the technical and professional requirements without specified set-aside conditions. The place of performance and organizational details are not explicitly defined, indicating flexibility in project execution scope while maintaining alignment with Texas Department of Transportation objectives. All submissions and inquiries must be made through the provided Texas SmartBuy portal link.

Texas Department of Transportation

POSTED

DEADLINE

Project Compliance and Regulatory CoordinationThe contract requires comprehensive compliance with federal, state, and local regulations related to the construction and operation of water systems, including the coordination of permits and engagement with regulatory agencies. The scope encompasses ensuring all activities adhere to applicable environmental, safety, and operational standards throughout the project lifecycle, with a focus on seamless agency coordination to facilitate approvals and avoid regulatory delays. This subcontract, posted on August 6, 2026, with a response deadline of September 8, 2026, is managed by the Mississippi Department of Finance and Administration under NAICS code 541690, indicating it falls within other scientific and technical consulting services. The place of performance and agency contact details are not specified, though the solicitation originates from Mississippi and is accessible via an official state portal. Bidders must be prepared to demonstrate expertise in regulatory frameworks governing water infrastructure and a proven ability to navigate complex permitting processes across multiple jurisdictions.

POSTED

DEADLINE

in about 1 month

Permitting and Utility Interconnection Management

PUR0001 - Purchasing Department

POSTED

DEADLINE

Preventive Maintenance Program ManagementThe City of Roswell, Georgia is seeking a subcontractor to develop and manage a comprehensive preventive maintenance program for water tanks, focusing on mechanical inspections, corrosion monitoring, and regulatory compliance reporting through the use of computerized maintenance management system tools. The scope of work requires consistent and systematic maintenance activities to ensure the integrity and functionality of water storage infrastructure, with detailed documentation and reporting to meet operational and safety standards. All tasks must be executed in alignment with industry best practices and local regulatory requirements, leveraging CMMS technology to track work orders, schedule inspections, and maintain an auditable record of maintenance history. The contract is being issued as a subcontract under NAICS code 541690, with a posted date of August 6, 2026 and a response deadline of September 10, 2026. The performance location is within the jurisdiction of the City of Roswell, though specific site details are not provided. Interested parties must submit proposals by the stated deadline to be considered, and the work is expected to contribute directly to the long-term reliability and safety of the city’s water storage systems. While no set-aside classification is designated, the subcontractor must demonstrate proven experience in water infrastructure maintenance and proficiency with CMMS platforms to fulfill the contract requirements effectively.

City of Roswell

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Small Business Subcontracting Support (Administrative)The contract supports the prime contractor in managing small business subcontracting activities, including representation, compliance, and administrative tasks related to UEI and CAGE code maintenance after award. It focuses on ensuring adherence to federal small business regulations and facilitating proper documentation and reporting required for subcontracting obligations. The scope is strictly administrative, centered on post-award support rather than direct service delivery or operational execution. This subcontract opportunity is under the NAICS code 541611 for management consulting services and is associated with the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The contract type is a subcontract with no designated set-aside, and interested parties can access further details via the provided DIBBS portal link.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging and Palletization ServicesThe contract requires precise packaging and palletization of gaskets in full compliance with military and Defense Logistics Agency standards to support government shipment and distribution operations. All work must adhere to strict specifications for material handling, labeling, and load configuration to ensure safe, efficient transport and storage across military supply chains. The performance location is designated as New Cumberland with a ZIP code of 17070-5002, indicating the work must be executed at or near this facility to meet logistical requirements. This is a subcontract opportunity under NAICS code 493190, which relates to other warehousing and storage services, and is issued by the Department of Defense under the Land Supplier Operations Vehicle Support organization. Proposals must be submitted by the response deadline of August 17, 2026, with the solicitation posted on August 5, 2026. While no set-aside designation or point of contact is specified, interested parties must access the official DIBBS platform via the provided link to obtain full solicitation details and submit responses in accordance with government procurement protocols.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Material Compliance and LabelingThe contract requires the provision of comprehensive hazard communication documentation that meets OSHA standards, including accurate safety data sheets and proper labeling for hazardous materials, all in full alignment with DFARS regulations and specific contractual obligations. This work is part of a subcontract under the Department of Defense, managed by LAND SUPPLIER OPNS VEHICLE SPT, with performance mandated to occur in New Cumberland, Pennsylvania, ensuring that all materials handled or supplied comply with federal safety and reporting mandates for military supply chains. The solicitation, posted on August 5, 2026, has a firm response deadline of August 17, 2026, and falls under NAICS code 541690, which encompasses other scientific and technical consulting services, indicating that the contractor must deliver not only physical labeling and documentation but also expert compliance verification. The nature of the contract demands precision in documentation accuracy, adherence to federal defense supply protocols, and readiness for audit or inspection, with no set-aside provisions specified, meaning any qualified subcontractor may respond. Performance must be executed with strict attention to regulatory requirements to ensure safety and operational readiness within Department of Defense logistics.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Gasket Manufacturing and TestingThe contract requires the manufacture, testing, and delivery of precision gaskets that must fully comply with military specifications and federal sourcing requirements, ensuring adherence to stringent quality and performance standards. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with the ZIP code 17070-5002, and the NAICS code 332996 identifies the industry category as Other Fabricated Metal Product Manufacturing. This is a subcontract opportunity issued under the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization, indicating the end-use is for vehicle support systems within defense operations. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, leaving a twelve-day window for potential subcontractors to submit proposals. The contract is not subject to a specific set-aside designation, meaning it is open to all eligible parties without restrictions based on business size or status. All submissions must be made through the DIBBS platform via the provided link, and compliance with all technical, logistical, and regulatory obligations outlined in the military specs is mandatory for award consideration.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Government Logistics and Distribution CoordinationThe contract requires coordination of FOB Origin shipping to MCLB Albany, Georgia, ensuring all logistics activities align with government transportation standards and destination inspection protocols. The vendor must manage the entire shipping process from origin to the final delivery point, maintaining strict compliance with WAWF documentation requirements to facilitate seamless electronic processing and acceptance at the receiving location. All shipments must meet specific inspection criteria established by the destination facility to guarantee readiness and accountability upon arrival. This is a subcontract under NAICS code 484220, related to truck transportation and distribution services for the Department of Defense’s Land Supplier Operations Vehicle Support organization. The opportunity was posted on August 5, 2026, with responses due by August 10, 2026, and performance must be delivered to the specified location in Albany, GA, with a zip code of 31704-0325. Participation requires familiarity with defense logistics systems and adherence to federal shipping and documentation practices, with no set-aside designation specified, meaning all eligible contractors may bid. All activities must be conducted through the designated DIBBS portal for submission and tracking.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Mechanical Parts and Hardware Supply (CAGE 0DZR6)The contract involves the supply of mechanical hardware components including fasteners, washers, and seals under CAGE code 0DZR6, with demand subject to variability and fulfillment on an as-needed basis. All materials must comply with the Defense Federal Acquisition Regulation Supplement (DFARS) requirements, ensuring sourcing and manufacturing adhere to U.S. federal defense standards for material origin and quality. The solicitation is structured as a subcontract under NAICS code 332722, which pertains to screw, nut, and bolt manufacturing, and is managed by the Department of Defense under the agency name LAND SUPPLIER OPNS VEHICLE SPT. Performance of the contract is to be executed in Albany, Georgia, with a zip code of 31704-0325, and the opportunity is open for responses until August 10, 2026, following a posting date of August 5, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Gasket Supply and Material FulfillmentThe contract seeks the procurement and delivery of standard and custom gaskets identified by NSN 5330013644771, with strict adherence to military packaging and labeling requirements as defined by MIL-STD-129, along with full compliance with all associated documentation standards. The gaskets must meet exacting specifications to ensure compatibility and performance in defense-related vehicle systems, with deliveries required to align with government logistics and supply chain protocols. The solicitation is classified as a subcontract under the NAICS code 332996, targeting suppliers capable of fulfilling specialized industrial component needs for the Department of Defense, specifically through the LAND SUPPLIER OPNS VEHICLE SPT organization. The place of performance is designated as Albany, Georgia, with a response deadline of August 10, 2026, and the posting date is August 5, 2026. All submissions must be made via the DIBBS platform, and contractors are expected to provide complete technical, logistical, and compliance documentation to support the delivery and acceptance of the gaskets within the military supply infrastructure.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Military Packaging & Preservation ServicesThe contract requires the packaging and preservation of gaskets in strict compliance with MIL-STD-2073-1E, emphasizing climate-controlled drying processes and UV-protective bagging to ensure long-term integrity and environmental resilience. All packaging must adhere to MIL-STD-129 requirements for labeling and barcoding, ensuring traceability and seamless integration into military logistics systems. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is classified as a subcontract under NAICS code 493190. The opportunity was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense under the Land Supplier Operations Vehicle Support agency. All submissions must meet the exacting standards for defense-grade packaging without exception, and the contract is open to eligible subcontractors through the DIBBS platform.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires the identification and thorough documentation of hazardous materials contained within gaskets or packaging, with strict adherence to regulatory standards including OSHA, DFARS, and Federal Standard No. 313. This involves accurately determining the presence, composition, and classification of hazardous substances and preparing Safety Data Sheets that fully comply with all applicable federal and defense acquisition requirements. The work must ensure complete traceability and regulatory alignment to support safe handling, transportation, and disposal throughout the supply chain. The solicitation is issued under the NAICS code 541690 for other scientific and technical consulting services, classified as a subcontract with a response deadline of August 17, 2026. The performance location is specified as New Cumberland, Pennsylvania, 17070-5002, with the contracting activity under the Department of Defense through the Land Supplier Operations Vehicle Support office. While no specific point of contact is provided, bidders must submit their proposals through the DIBBS platform at the designated URL before the deadline to be considered for award.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Precision Gasket Manufacturing & SupplyThe contract requires the manufacture and supply of 119 gaskets identified by NSN 5330012307033, fully compliant with military specifications governing material, dimensional accuracy, and performance under operational conditions. All units must adhere to zero-defect inspection standards, ensuring every gasket meets exacting quality benchmarks before acceptance. Packaging and preservation protocols must align with defense logistics requirements to prevent degradation during transit and storage, with documentation confirming adherence to these standards submitted with delivery. The contract is a subcontract under the Department of Defense, managed by LAND SUPPLIER OPNS VEHICLE SPT, with performance located in New Cumberland, Pennsylvania, 17070-5002. It was posted on August 5, 2026, with responses due by August 17, 2026, and falls under the NAICS code 332999 for other fabricated metal product manufacturing. The solicitation is accessible through the DIBBS platform, and successful bidders must demonstrate capacity to deliver defect-free components on schedule while complying with all federal defense procurement regulations.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of PITMAN ARM, STEERING (Automotive Steering Component)

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

Supply of Qualified Materials & ComponentsThe contract pertains to the supply of military-compliant materials, specifically stainless steel conforming to ASTM A240/A240M and A666/A666M standards, sourced exclusively from suppliers listed on the Qualified Products List or Qualified Manufacturer List. These materials are critical for defense applications and must meet stringent quality and performance criteria required by the Department of Defense. The solicitation is issued as a subcontract under NAICS code 331110, indicating involvement in the primary smelting and refining of steel, with performance obligated at New Cumberland, Pennsylvania, ZIP 17070-5002. All offers must be submitted by the response deadline of August 17, 2026, and the contract will be managed under the LAND SUPPLIER OPNS VEHICLE SPT organization, reflecting its direct support to vehicle and logistics systems within the DoD supply chain.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE