Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance & Packaging

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the proper packaging, labeling, and documentation of military electronic components that may contain mercury, ensuring full adherence to hazardous materials regulations. All work must comply with federal standards for handling and transporting hazardous substances to safeguard personnel, the environment, and operational readiness. The effort is focused on securing and preparing sensitive components for safe transport and storage within defense systems, with strict attention to regulatory compliance and traceable recordkeeping. This subcontract is issued under the NAICS code 562910 for waste management services and is tied to the Department of Defense’s Nuclear Reactor Program. Performance is required at a designated location in San Diego, California, with a response deadline of August 10, 2026, and the solicitation was posted on July 30, 2026. The work is critical to maintaining compliance and operational safety, and failure to meet regulatory requirements could result in rejection of shipped components and potential disruptions to military logistics or system deployment.

General Info

Packaging, labeling, and documenting hazardous military electronic components with mercury per federal regulations in San Diego by August 10, 2026.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → NUCLEAR REACTOR PROGRAM

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure military electronic components are packaged, labeled, and documented in compliance with hazardous materials regulations due to potential mercury content.

Similar Contracts

Same NAICS industry code

Alum Applications at Casey Lake (Tama Co.)

Solicitation # 27CRDLWBMBALM-0001

The Iowa Department of Natural Resources is soliciting bids for the application of alum at Casey Lake in Tama County to mitigate internal phosphorus loading and enhance water quality. The project is part of a broader effort to restore and protect lake ecosystems through targeted chemical treatment. All bid submissions must be made exclusively through the IMPACS Electronic Procurement System, and no alternative submission methods are accepted. The solicitation, identified as 27CRDLWBMBALM-0001, was posted on July 11, 2026, and responses are due by July 29, 2026, at 4:00 PM Central Time. The contracting agency operates under the state of Iowa, with the primary point of contact for inquiries being Colton Lullmann, reachable via email at procurement@dnr.iowa.gov or phone at 515-361-0743. The office is located in Des Moines, Iowa, but the project work will be conducted entirely at Casey Lake. This solicitation does not specify a set-aside program or NAICS code, and all eligible vendors are encouraged to submit proposals through the official online portal.

Department of Natural Resources

POSTED

about 10 hours ago

DEADLINE

Lead Hazard Reduction & Healthy Homes Intervention 28 Mitchell AV, Waterbury, CT

Solicitation # 8895

The City of Waterbury is soliciting sealed bids for Lead Hazard Reduction and Healthy Homes Intervention services at 28 Mitchell Avenue, Waterbury, Connecticut. Bid number 8895, posted on July 31, 2026, has a mandatory pre-bid conference scheduled for August 17, 2026, at 10:00 AM at the property address, and attendance by a representative of each bidder is required to remain eligible. Bids must be submitted in sealed envelopes and received no later than 10:30 AM on August 25, 2026, at the office of the Director of Purchasing, where they will be publicly opened. The clarification deadline for questions is August 19, 2026, at 2:00 PM. All bids must be submitted in U.S. dollars and are governed under an Invitation to Bid (ITB) process. The primary point of contact for inquiries is mmccauley@waterburyct.org. Failure to attend the mandatory pre-bid conference will disqualify a bidder from submission.

City of Waterbury

POSTED

about 15 hours ago

DEADLINE

Lead Hazard Reduction & Healthy Homes Intervention 105 Bank ST, Waterbury, CT

Solicitation # 8896

The City of Waterbury is soliciting sealed bids for Lead Hazard Reduction and Healthy Homes Intervention services at 105 Bank Street in Waterbury, Connecticut, under Bid Number 8896. Bids must be submitted by 10:30 AM on August 26, 2026, and will be publicly opened at that time. Participation in a mandatory pre-bid conference on August 18, 2026, at 10:00 AM at the same address is required for all bidders, and attendance must be confirmed by signing in. The solicitation is issued as an Invitation to Bid and remains open for bidding through the city’s procurement platform. All proposals must be submitted in sealed form to the Director of Purchasing’s office and will not be accepted after the deadline. The contract aims to address lead hazards and promote healthier living conditions in the designated residential property. The opportunity is posted in USD and managed by the City of Waterbury’s procurement office, with primary contact information provided as mmccauley@waterburyct.org. Bidders must register through the official portal to access detailed documents and questions, though the process is conducted offline. The clarification deadline for any questions is set for August 19, 2026, at 2:00 PM, after which no further inquiries will be accepted. No set-aside preferences are indicated, and the solicitation falls under state, local, or educational (SLED) government procurement. Failure to attend the mandatory pre-bid meeting will disqualify a bidder from submission. The project seeks qualified contractors to perform comprehensive interventions to ensure compliance with healthy housing standards.

City of Waterbury

POSTED

about 15 hours ago

DEADLINE

Forestry and Parks - Request for Quotes - Dillberry Lake Provincial Park - Tornado Recovery

Solicitation # AB-2026-05447

A tornado caused extensive damage to Dillberry Lake Provincial Park, leaving behind a hazardous mix of downed trees, woody debris, and scattered waste materials including insulation, wood, metal, and plastics from destroyed RVs, buildings, and vehicles. These debris fields are dispersed throughout the campground and surrounding vegetation, creating public safety risks and rendering the entire campground unusable for the remainder of the 2026 operating season. While the day-use area remains open, the closed campground areas require immediate and specialized cleanup to mitigate dangers and allow for infrastructure assessment and eventual restoration. The project aims to enhance safety for both visitors and staff, restore access to affected zones, and pave the way for future recovery efforts. The request for quotes, issued by Forestry and Parks under solicitation number AB-2026-05447, seeks qualified contractors to handle the complex removal and disposal of mixed hazardous debris. Proposals are due by August 12, 2026, and all information regarding scope and requirements is contained within the full RFQ document. Primary point of contact for inquiries is Breann Haskim, Project Manager, reachable via email or phone.

Forestry and Parks

POSTED

about 16 hours ago

DEADLINE

432 SPTS JP-8 Fuel Spill Remediation and Sampling

Solicitation # F3G3JF6174A001

This solicitation, F3G3JF6174A001, is a combined synopsis and request for proposal issued under FAR Part 12 for commercial services related to the remediation and sampling of JP-8 fuel contamination on Bureau of Land Management land near Creech Air Force Base in Nevada. The effort requires a single mobilization to excavate approximately 70 cubic yards of soil contaminated at or above 100 mg/kg of total petroleum hydrocarbons, properly containerize and transport the hazardous waste to an NDEP-approved facility, backfill with clean native material, and fully restore the site to meet regulatory standards. The contractor must provide all personnel, equipment, materials, and supervision, including a Nevada Certified Environmental Manager to oversee the work and ensure compliance with NDEP, BLM, and federal hazardous waste regulations. Performance must be completed within 60 calendar days from the notice to proceed, with inspection and acceptance occurring at the site under FOB Destination terms, meaning the contractor retains responsibility for transport and delivery until the Government accepts the work on-site. The contract is a total small business set-aside under NAICS code 562910 with a $25 million size standard, and offerors must self-certify their small business status and provide valid UEI and CAGE codes. All bids must be submitted electronically by 1000 PDT on August 7, 2026, and only electronic questions submitted by July 28, 2026, will be considered. Evaluation will follow a lowest price, technically acceptable approach, where the lowest-priced offer that meets all technical requirements—demonstrated through a detailed work plan, compliance with sampling protocols, and proper documentation including disposal manifests and a formal NDEP closure report—will be selected. No trade-offs are permitted, and the Government will not engage in discussions. Technical acceptability is assessed on a binary basis, with adherence to specified analytical methods such as EPA 1311, 6010D, 7470A, and NDEP sampling standards being critical. Contractors must also comply with SAM registration, WAWF invoicing, and representation requirements including certifications regarding tax delinquency, responsibility, and socioeconomic status. Packaging and labeling require compliance with federal hazardous waste transport rules, use of approved containers, and display of UEI and CAGE codes, though no specific MIL-STDs apply. Amendments have been issued to update responses and

FA4861 99 Cons Lgc

POSTED

about 20 hours ago

DEADLINE

AD / West Gate Chapel Mold Remediation on Eglin AFB, FL

Solicitation # FA282326Q0063

The contract is for comprehensive mold and microbial remediation services at Building 2574, the West Gate Chapel, located at Eglin Air Force Base in Florida, covering approximately 7,000 square feet of facility space. The scope of work requires specialized remediation procedures to address mold and microbial contamination in accordance with industry standards and federal guidelines, with detailed requirements outlined on page 4 of the solicitation. All work must be performed on-site at the designated location, and contractors are expected to comply with military site protocols, environmental safety requirements, and health standards applicable to Department of Defense installations. This solicitation is a Small Business Set Aside, total, under NAICS code 562910 for Remediation Services, open exclusively to small businesses. The solicitation was posted on July 31, 2026, with a response deadline of August 7, 2026, at 6:00 PM ET. The contracting office is part of the Department of Defense, specifically under the FA2823 AFTC PZIO organization, based at Eglin AFB, Florida, with Stella D. Cayer serving as the primary point of contact for inquiries. Proposals must be submitted through the official SAM.gov portal, and successful offerors will be required to complete remediation activities while minimizing disruption to facility operations and ensuring full compliance with all applicable regulations governing federal facility maintenance and environmental health.

FA2823 Aftc Pzio

POSTED

about 20 hours ago

DEADLINE

Downtown Specific Plan Amendments and Regional Performing Arts Theater EIRThe City of Livermore has approved a construction contract to carry out the remediation of contaminated soil and groundwater at the Livermore Village site, fulfilling Mitigation Measure HAZ-4 from the 2009 Downtown Specific Plan Amendments and Regional Performing Arts Theater Subsequent Environmental Impact Report. This remediation involves the excavation, transportation, and lawful disposal of contaminated materials to address historical soil and groundwater pollution, ensuring the site meets environmental safety standards. The work is essential to enable the previously approved Downtown Livermore Apartments project and aligns with the environmental conclusions of the 2009 SEIR, which determined that such remediation would reduce potential contamination impacts to a less-than-significant level. No changes to the original scope of the project or the mitigation measures have occurred, and no new substantial information has emerged that would necessitate additional environmental review under CEQA Guidelines section 15162. The contract strictly implements the remediation actions already analyzed and approved in the 2009 SEIR, ensuring compliance without requiring a supplement or revision to the prior environmental documentation. The City of Livermore, through its Assistant City Engineer, is overseeing the effort, with the project located entirely within Livermore, California, and tied to the broader goal of advancing residential development in alignment with environmental accountability.

City of Livermore

POSTED

DEADLINE

Deadwood Creek Tributaries RestorationThe California Department of Fish and Wildlife has authorized a stream and lakebed alteration agreement to support restoration efforts within the historic Brown Bear Mine property, focusing on three specific components located in Donnelly Gulch, Thorne Gulch, and Deadwood Creek. These actions, approved under Section 1602 of the Fish and Game Code, are designed as minor but critical measures to support broader site remediation by decommissioning a degraded roadway in Donnelly Gulch, placing large woody debris in Thorne Gulch to enhance habitat structure, and removing an abandoned vehicle from Deadwood Creek to eliminate pollution and obstruction. The work is targeted strictly within the existing footprint of the mine site and aims to curb illegal dumping and unauthorized occupation by improving site accessibility and environmental conditions. The project is forecasted under the title Deadwood Creek Tributaries Restoration with a posted date of July 31, 2026, and is being administered by Region 1 of the California Department of Fish and Wildlife, based in Redding and Eureka. Senior Environmental Scientist Philip Cramer serves as the primary point of contact for regulatory oversight, while Mark Lancaster of the Northwest California Resource Conservation and Development Council is the executing agent responsible for implementation. All activities are coordinated through the state’s environmental permitting system, with full documentation available via the provided CEQA Net link, ensuring compliance with state ecological protection standards.

Fish and Wildlife, Region 1 - Northern Region, Redding and Eureka

POSTED

DEADLINE

Civida - Request for Quotes - Biohazard Cleaning Services

Solicitation # AB-2026-05424

Civida is soliciting qualified contractors to provide biohazard clean-up services on an as-needed basis across properties in Edmonton and its surrounding areas. The request, identified by solicitation number AB-2026-05424, was posted on July 30, 2026, with responses due by September 3, 2026. Contractors must be equipped to handle a range of biohazard scenarios including bloodborne pathogens, chemical spill cleanup, trauma scenes, and other hazardous material removal in compliance with all applicable safety and regulatory standards. Services are expected to be delivered promptly and professionally, with contractors required to maintain appropriate certifications, insurance coverage, and trained personnel capable of responding to emergency situations at any time. The contract does not specify a fixed term or volume of work, meaning services will be engaged based on actual client needs as they arise. All work must be performed within the designated geographic area, primarily focused on the City of Edmonton in Alberta. Interested parties should direct inquiries to Karndeep Pannu, Procurement Specialist, via phone or email provided in the solicitation. Full details and submission guidelines are available through the official Alberta Purchasing portal link, and all proposals must be submitted by the stated deadline to be considered.

POSTED

DEADLINE

in about 1 month

COC-RWR-FY27-31100: Sink Undercoating Abatement

Solicitation # BD-26-1144-CAMBR-CAMBR-131923

The City of Cambridge is soliciting bids for Sink Undercoating Abatement under solicitation number BD-26-1144-CAMBR-CAMBR-131923, with the bid available for viewing and download via the City’s eProcurement Portal. The proposal submission deadline is August 13, 2026, at 7:00 PM, and the solicitation was posted on July 30, 2026. The work is to be performed within Cambridge, Massachusetts, specifically at locations where sink undercoating removal and abatement are required, and the project falls under the jurisdiction of the City of Cambridge as a state and local government entity. Shuo Wang is designated as the primary point of contact, serving in the role of Purchaser for the procurement. There is no set-aside classification specified, and the NAICS code is not provided, but the contract is open to qualified vendors meeting the technical and regulatory requirements for hazardous material abatement work. Bidders are expected to follow all applicable safety, environmental, and labor standards associated with the removal of sink undercoating materials.

CAMBR - City of Cambridge

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract pertains to specialized packaging, hazard warning labeling, and preparation of Material Safety Data Sheets for an electronic accessory kit that may contain hazardous materials, ensuring compliance with safety and regulatory standards. Services are required to meet rigorous Department of Defense specifications, with performance location specified as New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation falls under NAICS code 562910, categorizing it as waste management and remediation services, and is structured as a subcontract opportunity under the ACTIVE DEVICES DIVISION. All proposals must be submitted by the deadline of August 10, 2026, with the solicitation posted on July 30, 2026, and accessible via the DIBBS portal. The requirement emphasizes accurate identification, containment, and documentation of hazardous components within the electronic kit to facilitate safe handling, transportation, and disposal.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Hazardous Material Handling and Compliance Services

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

Solicitation # SPE7M2-26-Q-0706

This contract specifies the procurement of a copper alloy socket-type tee fitting with a nominal pipe size of 1 inch, manufactured via metal casting and requiring specialized tooling for production. The item is identified by NSN 4730-00-542-5250, with a quantity of 385 units to be delivered within 100 days of award. The solicitation is a total small business set-aside under FAR 19.5, with full and open competition restricted to qualified small businesses. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and configuration changes are governed by engineering change proposals and variance request procedures. Government identification must be removed from non-accepted supplies. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable mercury-containing devices must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. Each delivery lot must be accompanied by a Certificate of Quality Compliance (COQC) prepared in accordance with the Supplemental Quality Assurance Provision, with one copy provided physically and an electronic copy uploaded to the iRAPT system. For government-inspected shipments, the COQC must be available for review at the time of acceptance. The contract data indicates the issuing agency is the Department of Defense’s Nuclear Reactor Program, with performance taking place in New Cumberland, PA, and primary point of contact is Alla Yakover.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7M2-26-T-5487

A gasket with NSN 5330-99-570-6558 is being solicited under contract number SPE7M2-26-T-5487 by the Defense Logistics Agency, a component of the Department of Defense. The request specifies a quantity of two units and was posted on July 7, 2026, with a response deadline of July 20, 2026. The solicitation is open to federal contractors and does not designate a specific set-aside or NAICS code, indicating it is broadly available. The place of performance and point of contact details are not provided, and the procurement is managed through the DIBBS system with the official link for submission and information access.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7M2-26-Q-0703

This contract specifies the procurement of 167 fixed bushings with a nut and sleeve design, identified by NSN 5310-00-916-7522 and titled NUT, SLEEVE. The component features a #6.138 inch-32 UNC-2B threaded nut size, constructed with a polytetrafluoroethylene locking insert and an aluminum alloy 2024 body, with cadmium surface treatment applied overall. It includes an integrated self-locking mechanism on the threads to prevent loosening under vibration or load. The item is classified as a commercial item, and manufacturing must comply with the current revision of the applicable military or consensus non-government standards, with prior revisions still acceptable for previously produced units. Packaging must meet DLA specifications, and all items are subject to quality conformance inspection requirements and the mandatory removal of government identification from non-accepted supplies. Mercury and mercury-containing compounds are strictly prohibited in manufacturing or direct contact, except for specific exempted applications defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. The contract is issued under solicitation SPE7M2-26-Q-0703 as a total small business set-aside, with a response deadline of August 7, 2026, and a delivery requirement of 100 days after award. The point of contact for inquiries is Alla Yakover, and performance is set at Hill AFB, Utah.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

LOCKOUT ASSEMBLY, AI

Solicitation # SPE7M2-26-Q-0701

The contract pertains to the procurement of two units of a Lockout Assembly, AI, identified by NSN 1710-01-550-4204, under solicitation SPE7M2-26-Q-0701, with a delivery requirement of 171 days after award. The supplier must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-1916 or an equivalent zero-based sampling plan for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. All items must meet NAVAIR aircraft launch and recovery equipment traceability standards and be marked with the contract number, NAWC CAGE code, and part number unless superseded by technical drawings. The supply is subject to DLA packaging requirements and tailored higher-level quality provisions applicable to both manufacturers and non-manufacturers, with configuration change management and deviation requests governed by formal engineering change proposal procedures. No mercury or mercury-containing compounds may be intentionally introduced into the product except for specific exempted applications such as functional batteries, lighting, or naval sensors, and any permitted mercury-containing components must be shockproof and contain a secondary containment boundary per NAVSEA 5100-003D. The contractor must be certified as a CMMC Level 2 C3PAO and comply with cybersecurity requirements for handling Covered Defense Information. Technical data associated with this item is subject to export controls under either ITAR or EAR, and its disclosure to foreign persons—including foreign nationals within the U.S.—is prohibited without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and access to controlled technical data is restricted to contractors with valid US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and formal DLA approval. The supplier must also remove all government identification from non-accepted supplies and is exempt from Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The contract was issued by the Department of Defense’s Nuclear Reactor Program, with performance occurring at New Cumberland, PA, and inquiries directed to Victoria Payne of DLA. The solicitation closed on August 6, 2026, with award expected

POSTED

about 15 hours ago

DEADLINE

Commercial Item Supplier / Reseller for NSN ComponentsThe contract seeks a commercial supplier or reseller to source specific power supply components identified by NATO Stock Numbers, ensuring full traceability and strict adherence to anti-counterfeit standards. The supplier must acquire these items directly from original equipment manufacturers or approved secondary markets, maintaining documented provenance and integrity throughout the supply chain to meet military-grade reliability requirements. All transactions must comply with defense procurement integrity protocols and demonstrate the ability to verify authenticity without exception. Performance is required to be delivered to the specified location in New Cumberland, Pennsylvania, with a response deadline of August 10, 2026. The NAICS code 423690 indicates this falls under miscellaneous electronic components wholesale, and the contracting entity is the Nuclear Reactor Program under the Department of Defense. While no set-aside provisions are identified, the supplier is expected to support critical defense infrastructure with reliable, documented, and authentic components under a subcontracting arrangement.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Electrostatic Discharge (ESD) Sensitive Item Packaging and HandlingThe contract requires the provision of electrostatic discharge sensitive packaging, handling, and shipping services for a power supply marked with Special Marking Code 39, indicating it is highly susceptible to damage from static electricity. All procedures must comply with industry standards to prevent ESD-related failures during transit and storage, ensuring the integrity of the sensitive component throughout the supply chain. The work is classified as a subcontract under NAICS code 493190, which pertains to other warehousing and storage activities, and is issued by the Department of Defense under the Nuclear Reactor Program. The solicitation was posted on July 30, 2026, with a response deadline set for August 10, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contract does not specify a set-aside type, indicating it is open to all eligible bidders without preference for specific small business categories. The task involves strict adherence to ESD controls during every phase of packaging and shipping, and the winning party must demonstrate capability to meet military-grade protection requirements without reliance on external certifications or file-based references.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Material Compliance & Labeling ServicesThe contract requires full compliance with DFARS 252.223-7001 for hazardous material identification and reporting related to power supply components. This includes a thorough assessment to detect all regulated hazardous substances within the power supply, accurate preparation of hazard warning labels that meet federal standards, and submission of complete Material Safety Data Sheet documentation to ensure regulatory adherence. All work must be performed in accordance with Department of Defense requirements and is scoped to the place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation is classified as a subcontract under NAICS code 541620, indicating professional, scientific, and technical services related to environmental consulting and hazardous materials management. The response deadline is set for August 10, 2026, and the contract is issued under the NUCLEAR REACTOR PROGRAM within the Department of Defense. There is no stated set-aside designation, and the solicitation is accessible through the DIBBS system, but no point of contact information is provided within the data.

Environmental Consulting Services

POSTED

DEADLINE

Power Supply Manufacturing or SupplyThe contract calls for the supply of a single commercial off-the-shelf power supply unit identified by NSN 6120016988498, intended for integration into defense systems. The requirement is structured as a subcontract under NAICS code 334310, which pertains to electronic component and product manufacturing. The procurement is managed by the Nuclear Reactor Program within the Department of Defense, with performance slated to take place at a location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 30, 2026, and responses must be submitted by August 10, 2026, leaving a limited window for potential suppliers to respond. No set-aside designation is specified, indicating the opportunity is open to all qualified contractors without restriction based on business size or classification. The contract is accessible through the DIBBS platform using the provided link, and all bids must meet the technical and compliance requirements associated with defense-grade power supply units.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance Support (NIST SP 800-171)This contract requires the implementation and assessment of NIST SP 800-171 security controls to protect covered defense information within contractor systems, as mandated by DFARS clause 252.240-7997. The work involves ensuring all relevant cybersecurity measures are properly deployed, monitored, and validated to meet federal requirements for handling sensitive defense data, with a focus on compliance, risk mitigation, and ongoing control effectiveness. The contractor must demonstrate full alignment with the NIST framework through documentation, testing, and audits to satisfy Department of Defense expectations. The contract is classified as a subcontract under NAICS code 541512, associated with the Nuclear Reactor Program within the Department of Defense, and performance is required at Robins Air Force Base, Georgia, with a zip code of 31098-1887. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. Although no set-aside designation or point of contact is specified, the urgency of the deadline and the critical nature of the cybersecurity requirements underscore the need for timely and precise execution of all compliance activities to support national defense operations.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires the preparation of hazard warning labels and Material Safety Data Sheets for hazardous materials, ensuring full compliance with MIL-STD-129 for military packaging and labeling standards. This includes creating accurate, standardized documentation and markings that meet stringent Department of Defense requirements for the safe handling, storage, and transportation of regulated substances. All deliverables must be aligned with federal guidelines to support military logistics and safety protocols. The work is to be performed at Robins Air Force Base, Georgia, under a subcontract agreement issued by the Nuclear Reactor Program under the Department of Defense. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026. The NAICS code 541380 indicates the work falls under other scientific and technical consulting services, emphasizing the need for specialized expertise in hazardous materials compliance rather than general packaging or logistics services.

Testing Laboratories and Services

POSTED

DEADLINE

Fixed Film Resistor SupplyThe contract calls for the supply of 34,000 fixed film resistors identified by the National Stock Number 5905010852186, which must meet stringent military specifications to ensure reliability and performance in defense applications. These components are destined for delivery to Robins Air Force Base, Georgia, with a specific zip code of 31098-1887, indicating the exact location of performance. The procurement is classified as a subcontract under the NAICS code 334416, which categorizes it within electronic component manufacturing, and is managed by the NUCLEAR REACTOR PROGRAM under the Department of Defense. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, leaving a limited window for qualified suppliers to submit proposals. Although no set-aside designation is specified, the requirement is non-negotiable in terms of compliance, quality, and delivery timelines, reflecting its critical role in defense systems. The official interface for submitting responses is accessible via the DIBBS platform using the provided link.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

DEADLINE

Military Labeling and Marking ServicesThe contract requires the application of permanent, machine-readable labels to each unit in full compliance with MIL-STD-129 for shipment marking and MIL-STD-130N for unique item identification, including the use of Data Matrix barcoding to ensure accurate tracking and inventory management. All labeling must meet rigorous military standards for durability, legibility, and data integrity under operational conditions, ensuring seamless integration into defense logistics systems. The work is designated as a subcontract under the NAICS code 811212, with performance scheduled to take place in Greensboro, North Carolina, at a ZIP code of 27409. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, and is issued by the Nuclear Reactor Program within the Department of Defense. While no specific set-aside or contracting office details are provided, the requirement is part of a broader effort to standardize identification and marking across military assets, supporting accountability and readiness. Contractors must demonstrate capability to execute precise labeling operations compliant with federal military specifications and deliver results that adhere strictly to the stated technical requirements without deviation.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE