Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hazardous Materials Compliance and Safety Data Management

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541690
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # C2305
The Elsinore Valley Municipal Water District (EVMWD) is soliciting proposals for the Corydon Well Replacement Project, which involves the professional design, bidding support, and engineering services required to replace and abandon the existing Corydon well in Wildomar, California. The project is divided into two primary phases: Phase 1 focuses on civil site design, technical specifications, and construction management for the drilling of the new well and abandonment of the old one; Phase 2 covers the architectural, civil, mechanical, structural, electrical, and instrumentation design for equipping, testing, and commissioning the new groundwater production well. The project is funded through District funds and a Department of the Interior Bureau of Reclamation WaterSMART Planning and Project Design Grant, necessitating compliance with federal requirements, including the Build America Act, Buy America Preference, and the use of the Automated Standard Application for Payments (ASAP) system. TKE Engineering, Inc. is seeking qualified DBE, MBE, and WBE firms specializing in hydrology/hydraulic consulting, structural and electrical engineering, geotechnical investigation, and utility potholing. Proposals are due by 10:00 a.m. on September 1, 2026, via the PlanetBids Vendor Portal. Selection is based on demonstrated competence and professional qualifications, with evaluation weighted toward relevant experience (25%), project approach (25%), and scope/schedule (20%), while cost and innovation each account for 10%. The total estimated project cost is 2,260,788 dollars, though the final contract will be a negotiated not-to-exceed dollar limit. Awardees must adhere to strict federal and state regulations, including whistleblower protections, drug-free workplace standards, and specific insurance and bonding requirements for contracts exceeding the simplified acquisition threshold.
TKE Engineering, Inc.

POSTED

about 8 hours ago

DEADLINE

in 6 days

AI Contract Overview

Show more

The contract titled Hazardous Materials Compliance and Safety Data Management requires full adherence to federal hazardous materials regulations, with specific emphasis on proper labeling, Safety Data Sheet (SDS) management, and comprehensive documentation in accordance with OSHA and FAR standards. The work is focused on ensuring all hazardous material handling procedures meet stringent safety and regulatory requirements to protect personnel and maintain operational compliance within a Department of Defense setting. This is a small business set-aside subcontract under NAICS code 541690, indicating it is reserved exclusively for total small business participation. The solicitation was posted on July 16, 2026, with a response deadline of July 24, 2026. The performance location is designated as New Cumberland, Pennsylvania, 17070-5002, and the contracting activity is under the ASC Commodities Division. All proposals must be submitted through the DIBBS platform at the provided link, and the contractor will be responsible for delivering services that support secure, accurate, and auditable hazardous materials documentation and management practices.

General Info

Small business subcontract for hazardous materials compliance, SDS management, and OSHA/FAR adherence in New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A6-26-T-07HJ.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BUSHING, SLEEVE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Ensure compliance with hazardous materials regulations including labeling, SDS management, and documentation per OSHA and FAR requirements.

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-26-T-17LV
Solicitation SPE4A6-26-T-17LV is a fixed-price request for quotations issued by the DLA Aviation, ASC Commodities Division, for the procurement of 267 self-locking hexagon nuts under NSN 5310-00-982-5064. The items are to be delivered to DLA Distribution Jacksonville with a required delivery date of March 28, 2027, and a delivery period of 171 days. The procurement is fully competitive and requires hardware to be manufactured according to the current revision of the applicable part standard. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of Technical and Quality Requirements and requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Inspection and acceptance are designated at the destination per FAR 52.246-2, though some provisions reference origin acceptance. Sampling must adhere to MIL-STD-1916 or ASQ H1331, and identification marking must follow MIL-STD-130N. Packaging must comply with MIL-STD-2073-1E and RP001, with a strict prohibition on the use of mercury or mercury-containing compounds. Offerors must comply with the Buy American Act and Berry Amendment, providing disclosure for any non-domestic materials. The government will not evaluate offers utilizing additive manufacturing. Payment and receiving reports must be processed electronically via Wide Area WorkFlow. A price evaluation preference is available for certified HUBZone small businesses. Quotations were due by August 24, 2026, to the point of contact, Erin Edwards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334519
New
DIBBS
GAGE, DIFFERENTIAL, DIAL
Solicitation # SPE4A6-26-T-17YY
Solicitation SPE4A6-26-T-17YY is a total small business set-aside request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of nine dial indicating differential pressure gages, identified by NSN 6685-01-073-8428. The requirement specifies a delivery timeframe of 171 days after order, with an original required delivery date of January 14, 2027, and a need ship date of February 12, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-2073-1E, with marking governed by MIL-STD-129. Quality assurance will be conducted using MIL-STD-1916 or ASQ H1331 zero-based sampling plans. Key material restrictions include a prohibition on the intentional addition of mercury or mercury-containing compounds, except where functionally required and shock-proofed per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The solicitation is governed by NAICS code 334519 and incorporates various FAR and DFARS clauses, including cybersecurity reporting under DFARS 252.204-7012 and Buy American Act compliance.
Other Measuring and Controlling Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
WASHER, SPRING TENSION
Solicitation # SPE4A6-26-T-17MB
Solicitation SPE4A6-26-T-17MB is a Request for Quotations issued by DLA Aviation, ASC Commodities Division, for the procurement of 11 units of spring tension washers, identified by NSN 5310-01-445-1502. The delivery is set for 171 days after award, with a required delivery date of December 11, 2026, and a need ship date of February 12, 2027. Shipping is FOB Destination to DLA Distribution San Joaquin in Tracy, California. The procurement is not a small business set-aside and falls under NAICS code 332722. Notably, there is no approved technical data package available for this item as the data is either proprietary or insufficient for competitive procurement. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Preservation must follow ASTM D3951, and the use of mercury or mercury compounds in preservation, packaging, and marking is strictly prohibited. Inspection and acceptance will occur at the destination, with sampling conducted according to MIL-STD-1916 or ASQ H1331, targeting zero non-conformances. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and adherence to DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted through the DLA Internet Bid Board System.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details