Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance and Safety Data Sheet (SDS) Management

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires identification of hazardous materials within packaging and components, along with the preparation of Safety Data Sheets that comply with OSHA standards under 29 CFR 1910.1200, ensuring proper hazard communication and documentation. It also mandates that all labeling adheres to both federal regulations and military standards, specifically MIL-STD-129, to support uniform military logistics and safety protocols. The scope encompasses full compliance with hazardous material handling procedures from identification through labeling and documentation, requiring technical expertise in regulatory frameworks and military specification alignment. This is a subcontract set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program, with the NAICS code 541690 indicating it falls under Other Scientific and Technical Consulting Services. The solicitation was posted on August 2, 2026, with responses due by August 17, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. The place of performance and point of contact information are not specified, but the work is likely tied to defense logistics operations, requiring strict adherence to both civilian safety regulations and military documentation standards.

General Info

Small business contract for hazardous material identification, SDS compliance, and MIL-STD-129 labeling under OSHA and DoD requirements.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identify hazardous materials in packaging or components, prepare OSHA-compliant Safety Data Sheets (SDS), and ensure labeling meets 29 CFR 1910.1200 and MIL-STD-129 requirements.

Similar Contracts

Same NAICS industry code

Construction Safety Services IDIQThe Port of Seattle has initiated a proactive Construction Safety Services IDIQ to address the growing complexity and liability associated with construction activities on its property. With increasing legal obligations and heightened scrutiny from recent court rulings, the Port is formalizing a comprehensive safety program to ensure all construction projects are conducted without disrupting port operations and with the highest standards of worker and public safety. This initiative is designed to monitor, enforce, and continuously improve safety protocols across all construction sites under Port jurisdiction, reflecting a strategic shift toward risk mitigation and regulatory compliance. The contract is issued under NAICS code 541690 and is structured as an indefinite delivery/indefinite quantity agreement to provide flexible access to qualified safety service providers. The program will support a range of construction activities by integrating expert safety oversight, compliance auditing, and operational coordination directly into project workflows. Point of contact for inquiries is Sue Yi, with Bruce Gamble serving as the Project Manager, and further details can be found through the Port’s official solicitation portal. The forecasted posting date indicates the Port is preparing to solicit proposals in the near future to establish a pool of vetted safety service firms ready to respond to emergent and planned construction needs.

Construction Management

POSTED

about 7 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ProvisionThe contractor is required to identify, document, and submit Safety Data Sheets for all hazardous components present in the springs being supplied, ensuring full alignment with current hazard communication standards. This includes maintaining accurate and up-to-date SDS documentation for every substance classified as hazardous, and promptly providing these sheets upon request or as part of routine compliance reporting. The work must be performed in accordance with federal regulations governing the handling and communication of chemical hazards, with emphasis on clarity, completeness, and timeliness of information delivered to the end user. Performance of this subcontract is tied to the Department of Defense’s Fluid Handling Division, with the place of performance located in Phoenix, Arizona, 85043. The solicitation, classified under NAICS code 541690, is open for responses until August 13, 2026, following a posting date of August 2, 2026. The contractor must ensure continuous compliance throughout the term of the agreement, supporting the procurement chain with reliable and verified safety documentation to safeguard personnel and meet regulatory obligations under defense contracting protocols.

FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract pertains to regulatory consulting services focused on hazard communication compliance, specifically requiring the preparation of warning labels and safety data sheets (SDS) that meet both OSHA and military standards. This work is critical to ensuring proper handling, storage, and disposal of hazardous materials across defense operations, with all deliverables needing to align with federal safety regulations and Department of Defense requirements. The services will support the Defense Logistics Agency in maintaining stringent compliance for hazardous materials used in military supply chains and facilities. The contract is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services, and is issued by the Department of Defense through the Defense Logistics Agency. Performance is required at a designated location in Albany, Georgia, with a zip code of 31704-0325. The solicitation was posted on August 2, 2026, and responses must be submitted by August 13, 2026. There is no set-aside designation specified, indicating the opportunity is open to all qualified subcontractors regardless of size or status. All work must be completed in accordance with applicable federal regulations, and contractors are expected to demonstrate expertise in hazard communication standards and military-specific documentation protocols.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires comprehensive identification, labeling, and documentation of all hazardous materials used in or associated with cutting tools, ensuring full compliance with regulatory standards. This includes the accurate generation and maintenance of Safety Data Sheets (SDS) that meet required specifications, covering material composition, handling procedures, health and environmental hazards, and emergency response measures. All labeling must align with international and domestic regulations to ensure safe handling, storage, and transportation throughout the supply chain. The subcontract is issued by the Defense Logistics Agency under the Department of Defense, with performance required in Springfield, Missouri, and a response deadline of August 13, 2026. It falls under NAICS code 541690, indicating its focus on other scientific and technical consulting services, specifically relating to regulatory compliance and safety documentation. The solicitation is open to qualified subcontractors capable of delivering precise, auditable SDS records and robust hazardous materials management protocols to support defense-related manufacturing operations.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling Services

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract requires the provision of hazardous materials labeling, safety data sheet documentation, and comprehensive compliance management services for military shipments, strictly adhering to OSHA regulations and MIL-STD-129 standards. All services must ensure accurate identification, marking, and documentation of hazardous substances during transportation and storage within the Department of Defense supply chain, with specific performance obligations centered at Barstow, California, ZIP code 92311-5014. The work is categorized as a subcontract under NAICS code 541690, indicating specialized administrative and support services related to management and compliance, and is being procured by the Fluid Handling Division of the Department of Defense. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, requiring timely submission of proposals that demonstrate technical expertise and regulatory alignment.

FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract entails the preparation and timely submission of hazard warning labels and Safety Data Sheets for gas detection equipment, ensuring full alignment with current federal hazardous materials regulations. This includes ongoing monitoring of regulatory updates and adjustments to documentation to maintain continuous compliance, with a focus on accuracy, clarity, and adherence to standards governing the communication of chemical hazards. The work must be performed in a manner that supports safe handling, storage, and transportation of gas detectors across military and defense supply chains. The contract is structured as a subcontract under the NAICS code 541690 and is tied to the Department of Defense’s Maritime Supply Chain initiative, with performance required at the designated location in Tracy, California, zip code 95304-5000. Bidders must respond by the deadline of August 13, 2026, and the opportunity was posted on August 2, 2026. While no specific set-aside status is indicated, the subcontract underscores the critical need for precise, regulated documentation in high-stakes defense environments where safety and compliance directly impact operational readiness.

MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling SupportThe contract entails providing technical documentation and regulatory support for hazard warning labels on valves that contain hazardous substances, ensuring compliance with applicable safety and environmental regulations. The work requires precise labeling that accurately conveys risks associated with the materials within the valves, along with supporting documentation to validate adherence to federal and international hazardous materials standards. This is a subcontract under the NAICS code 541690, issued by the Department of Defense through its New Cumberland Facility, with performance required at the location in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 2, 2026, with a mandatory response deadline of August 13, 2026. There is no set-aside classification specified, and the contract is structured as a direct subcontract without public bid details beyond the provided DIBBS link. The focus is strictly on compliance-related technical services rather than manufacturing or supply, meaning the successful contractor must demonstrate expertise in hazard communication standards, regulatory frameworks, and the preparation of legally defensible labeling documentation for hazardous industrial components.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and Safety Data ManagementThe contract requires full compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 for all hazardous materials used in the production and handling of defense hardware. This includes the authoritative preparation and maintenance of Safety Data Sheets for each chemical substance involved, ensuring accurate hazard identification, risk communication, and regulatory adherence across the supply chain. Hazard labeling must be implemented precisely according to GHS standards, covering containers, work areas, and any materials transferred or stored during manufacturing or logistics operations. All activities must be performed in alignment with Defense Department protocols under the ASC Commodities Division, with performance centered at the New Cumberland location, zip code 17070-5002. The solicitation, issued as a subcontract under NAICS code 541690, demands timely submission by the August 10, 2026 deadline, and is structured to support ongoing defense hardware programs where chemical safety and regulatory integrity are critical to operational readiness and worker protection.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Hazardous Material Safety Data Sheet (SDS) PreparationThe contract requires the preparation and submission of Safety Data Sheets (SDS) for hazardous materials that fully comply with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), as well as the Defense Federal Acquisition Regulation Supplement (DFARS) and Occupational Safety and Health Administration (OSHA) standards. This work must be completed and delivered prior to contract award, ensuring all documentation aligns with federal and international regulatory frameworks governing hazardous substance communication. The SDS must accurately reflect the chemical composition, hazards, handling procedures, and emergency response measures for all applicable materials. The solicitation is issued as a subcontract under NAICS code 541690, indicating it falls under Other Scientific and Technical Consulting Services, and is being managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. The place of performance is designated as APO with ZIP code 96264-2022, suggesting operations may involve overseas or military logistical support environments. The response deadline is August 10, 2026, with the solicitation posted on August 2, 2026, providing a limited window for qualified vendors to submit proposals through the DIBBS platform. Compliance with all regulatory requirements is mandatory, and failure to meet GHS, DFARS, or OSHA standards will result in disqualification.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and Regulatory SupportThe contract requires comprehensive regulatory compliance services for hazardous materials, focusing on the preparation of safety data sheets, hazard communication, and proper labeling in accordance with OSHA’s Hazard Communication Standard and applicable military regulations. The contractor must assess and determine the applicability of exemptions under federal statutes including the Federal Food, Drug, and Cosmetic Act, the Federal Insecticide, Fungicide, and Rodenticide Act, the Consumer Product Safety Act, the Federal Hazardous Substances Act, and the Federal Aviation Administration Act to ensure accurate and legally sound compliance positioning. All work must align with the strict requirements of the Department of Defense, specifically under the Defense Logistics Agency, and be performed to support defense-related operations and material handling standards. This is a subcontract opportunity, posted on August 2, 2026, with a response deadline of August 13, 2026, and falls under the NAICS code 541690 for other scientific and technical consulting services. The place of performance and specific office location are not detailed, but the work is tied to DoD needs and may involve coordination across multiple military and federal regulatory frameworks. The solicitation is accessible via the DIBBS platform, and the contractor must be prepared to meet all technical, procedural, and documentation requirements to ensure full adherence to both civilian and military regulatory expectations.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

Hazard Communication & Safety Compliance SupportThe contract requires the development of hazard warning labels, safety data sheets, and compliance documentation for hazardous materials used in packaging or integrated into valve components, ensuring full adherence to DFARS and OSHA regulations. All deliverables must accurately reflect the chemical properties, handling procedures, and risk mitigations associated with the materials, supporting safe transportation, storage, and use within defense supply chains. The work must align with federal compliance standards and be delivered to meet stringent military procurement requirements. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a place of performance designated as FPO 96678. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. The North American Industry Classification System code is 541690, indicating it falls under other scientific and technical consulting services. There is no specified set-aside status, and the opportunity is open to qualified vendors capable of delivering compliant hazard communication materials on schedule.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

Bevel Gear Manufacturing and SupplyThe contract entails the manufacture and supply of precision bevel gears designated by NSN 3020-01-363-8103, specifically for use in heavy vehicle systems, with a potential delivery of up to 23 units under an indefinite delivery arrangement. These components will be distributed to both domestic and international government locations, ensuring operational readiness across a broad range of military and defense applications. The solicitation is structured as a subcontract with a total small business set-aside designation, reserved exclusively for small businesses under SBA guidelines as defined by FAR 19.5, with the NAICS code 333613 classifying it under the manufacturing of other agricultural, construction, and mining machinery. The contract was posted on August 2, 2026, with a response deadline of August 17, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. While specific performance locations and point of contact details are not provided, the procurement is administered through the DLA Dibbs platform, indicating its alignment with defense logistics protocols. All manufacturing must meet the stringent quality and technical standards required for defense-grade precision gearing, and the set-aside status ensures participation is limited to qualified small businesses capable of delivering reliable, mission-critical components under tight timelines.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Small Business Compliance and Representation ServicesThe contract titled Small Business Compliance and Representation Services is a subcontract issued under a Total Small Business Set-Aside by the Department of Defense’s Strategic Acq Program Directorate, targeting businesses certified as small under SBA guidelines. It requires comprehensive consulting support focused on small business representation, including accurate UEI and CAGE code management, and strict adherence to FAR 52.219-28 regulations governing small business subcontracting plans. The work is intended to ensure full compliance with federal sourcing requirements and proper documentation for small business status verification and reporting. The solicitation was posted on August 2, 2026, with responses due by August 17, 2026, and falls under NAICS code 541611 for management consulting services. The contract is administered through the DIBBS platform and does not specify a place of performance or point of contact, indicating possible remote or nationwide performance. Bidders must be small business entities eligible for the set-aside and capable of delivering expert guidance on federal contracting compliance, particularly in maintaining accurate representations and managing documentation critical to small business status under government procurement rules.

Administrative Management and General Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

Domestic Freight and Transportation LogisticsThe contract is for domestic freight and transportation logistics to deliver ventilators to locations within the United States, requiring proof of delivery and compliance with WAWF-DS for electronic documentation. It is a subcontract awarded under a Total Small Business Set-Aside classification, exclusively available to small businesses as defined by the SBA, with the NAICS code 484220 specifying freight transportation services. The U.S. Department of Defense, through its Strategic Acquisition Program Directorate, is the contracting organization, and the performance location spans multiple U.S. destinations without specific geographic restrictions listed. Interested parties must submit responses by the deadline of August 17, 2026, with the solicitation originally posted on August 2, 2026. All deliveries must be trackable and verified through official electronic systems to meet federal logistics and accountability standards.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

MIL-STD-129 and Commercial Packaging ServicesThe contract requires full compliance with MIL-STD-129 for labeling and marking of military shipments, ensuring all packaging meets standardized military specifications for identification, tracking, and handling. It also mandates adherence to RP001 palletization guidelines to ensure secure, uniform, and efficient loading and transport of cargo across defense logistics networks. All work must be performed by a small business as this is a total small business set-aside under SBA regulations, with the NAICS code 323111 indicating printing and related support activities. The solicitation is open for bid through August 17, 2026, and is issued by the Strategic Acquisition Program Directorate under the Department of Defense with performance expected to support military logistics operations. The subcontract is publicly accessible through the DIBBS platform, and successful bidders must demonstrate proven capability in military packaging standards without deviation.

Commercial Printing (except Screen and Books)

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThis contract seeks specialized packaging, labeling, and safety data sheet preparation services for hazardous materials in strict alignment with TQ IP025 and FED-STD-313 standards. It is structured as a subcontract under a Total Small Business Set-Aside, exclusively open to small businesses as defined by the SBA, ensuring that only eligible small business firms may bid. The North American Industry Classification System code 493190 applies, indicating the work involves other support activities for transportation, specifically tailored to hazardous material handling. The solicitation was posted on August 2, 2026, with responses due by August 17, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Performance locations are not specified, and no point of contact is listed. The full details and submission portal are accessible through the DIBBS platform using the provided link.

Other Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Air Circulator Ventilator Manufacturing SupplyThe contract is for the manufacture and supply of air circulator ventilators that must fully comply with DLA RA001 specifications, MIL-STD-129 labeling requirements, and ASTM D3951 packaging standards to ensure military-grade durability, identification, and protection during transit and storage. The work is classified as a small business set-aside under the SBA program, meaning only small business concerns are eligible to bid, and the North American Industry Classification System code 333415 identifies the industry as ventilation and air conditioning equipment manufacturing. The opportunity was posted on August 2, 2026, with a response deadline of August 17, 2026, and is structured as a subcontract under the Strategic Acquisition Program Directorate within the Department of Defense. All units must be produced, labeled, and packaged according to strict federal standards to meet operational demands, and performance is expected to align with the DLA’s logistical and quality control expectations for defense procurement.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of NSN 5330-01-181-4905 Seal Components with Military Packaging and LabelingThe contract calls for the procurement and delivery of 19 military-specification seals identified by NSN 5330-01-181-4905, with strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling requirements. All items must be properly marked and packaged in compliance with federal military standards, including handling of any hazardous materials if present, ensuring readiness for immediate use upon arrival. Delivery is specified as FOB Origin, meaning the buyer assumes all risks and responsibilities once the goods leave the supplier’s facility, with final acceptance occurring at the destination point. This is a small business set-aside subcontract under the SBA program, exclusively available to businesses certified as small under the NAICS code 332998. The solicitation was posted on August 2, 2026, with a submission deadline of August 17, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. The contract does not specify a physical location for performance or a point of contact, and the procurement is conducted through the DLA DIBBS platform, requiring vendors to participate electronically via the provided link to submit their proposals.

Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance NotificationThis contract requires the identification and timely notification of any radioactive or hazardous materials present in knives or their components to ensure compliance with DFARS 52.223-7. The subcontractor must thoroughly examine all items supplied under this agreement and immediately inform the government of the presence of such materials, maintaining strict adherence to regulatory requirements for defense-related procurement. The obligation applies to all phases of production and delivery, with no allowance for omission or delay in reporting. The solicitation is classified under NAICS code 541690 and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. The deadline for responses is August 17, 2026, with the request posted on August 2, 2026. Performance location and point of contact details are not specified, but the contract must be fulfilled in alignment with federal defense standards. Interested parties must access the official DIBBS portal using the provided link to submit their proposed compliance procedures and demonstrate capability to meet the specified reporting obligations without delay.

Other Scientific and Technical Consulting Services

POSTED

about 8 hours ago

DEADLINE

Specialized Packaging and Palletization ServicesThe contract requires the provision of military-compliant packaging, preservation, and palletization services for combat knives in strict accordance with Department of Defense standards, including RP001 and ASTM D3951. All work must ensure the protection, durability, and readiness of the knives during storage and transportation, with adherence to specified military packaging protocols for environmental resilience, rust prevention, and structural integrity. The scope encompasses complete handling from final product preparation through secure palletization, ensuring each unit meets rigorous defense logistics requirements. This subcontract opportunity is issued by the Strategic Acquisition Program Directorate under the Department of Defense, with a response deadline of August 17, 2026. The NAICS code 493190 categorizes the work under Other Transportation Support Activities, indicating the focus on specialized logistics and handling services rather than manufacturing. The place of performance and point of contact details are not specified, but compliance with all technical and procedural standards outlined in referenced military specifications is mandatory. Interested parties must submit proposals prior to the deadline to be considered for award.

Other Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Combat Knife Manufacturing and SupplyThe contract entails the manufacture and delivery of 1,864 combat knives adhering to strict technical specifications, including requirements for packaging, labeling, and secure transportation. All items are classified as ITAR-controlled defense articles, mandating full compliance with U.S. export control regulations and restricting unauthorized disclosure or transfer. The work must be performed under the authority of the Strategic Acq Program Directorate within the Department of Defense, with a deadline for responses set for August 17, 2026. The NAICS code 332994 indicates classification under Other Fabricated Metal Product Manufacturing, reflecting the specialized production capabilities required. The contract is structured as a subcontract and is publicly accessible via the DIBBS platform under solicitation number SPE7LX26U9128, though specific performance location and point of contact details are not provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 8 hours ago

DEADLINE

Packaging and Palletization Services for Fragile GoodsThe contract requires the provision of packaging, cushioning, and palletization services for fragile vehicular windows in full compliance with MIL-STD-129 standards, utilizing GF cushioning materials specifically designated for glass protection. All shipments must be marked with the special coding identifier '36' to indicate glass content and ensure proper handling throughout the supply chain. The work must be performed under a Total Small Business Set-Aside as defined by FAR 19.5, limiting participation to small businesses certified by the SBA. The North American Industry Classification System code for this solicitation is 561910, categorizing it under Other Support Activities for Transportation. The contract is issued under the Department of Defense’s Strategic Acquisition Program Directorate with a response deadline of August 17, 2026, and is classified as a subcontract opportunity. The place of performance and exact location details are unspecified, but work must align with the DOD’s logistical and handling protocols for fragile glass components.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Vehicular Window Supply and DeliveryThe contract pertains to the supply and delivery of military-spec vehicular windows identified by NSN 2510015665005 under an indefinite-delivery arrangement, requiring the subcontractor to fulfill orders in strict accordance with technical specifications, packaging standards, and FOB origin or delivery terms. All work must meet rigorous military quality and performance benchmarks, ensuring compatibility and reliability in operational environments. The solicitation is exclusively open to small businesses under a Total Small Business Set-Aside as defined by FAR 19.5, with the NAICS code 336399 categorizing the work within other transportation equipment manufacturing. The procuring entity is the Strategic Acquisition Program Directorate within the Department of Defense, and the response deadline is August 17, 2026, with the solicitation posted on August 2, 2026. Delivery performance is tied to FOB terms, meaning the subcontractor bears responsibility for logistics and compliance from the point of origin through to final destination as specified in each order.

All Other Motor Vehicle Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE