Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Air Circulator Ventilator Manufacturing Supply

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the manufacture and supply of air circulator ventilators that must fully comply with DLA RA001 specifications, MIL-STD-129 labeling requirements, and ASTM D3951 packaging standards to ensure military-grade durability, identification, and protection during transit and storage. The work is classified as a small business set-aside under the SBA program, meaning only small business concerns are eligible to bid, and the North American Industry Classification System code 333415 identifies the industry as ventilation and air conditioning equipment manufacturing. The opportunity was posted on August 2, 2026, with a response deadline of August 17, 2026, and is structured as a subcontract under the Strategic Acquisition Program Directorate within the Department of Defense. All units must be produced, labeled, and packaged according to strict federal standards to meet operational demands, and performance is expected to align with the DLA’s logistical and quality control expectations for defense procurement.

General Info

Small business set-aside for military-grade air circulators complying with DLA RA001, MIL-STD-129, and ASTM D3951.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of air circulator ventilators compliant with DLA RA001, MIL-STD-129 labeling, and ASTM D3951 packaging standards.

Similar Contracts

Same NAICS industry code

REFRIGERATOR-FREEZE

Solicitation # SPE3SE-26-T-1084

The contract mandates the procurement of one refrigerator-freezer unit, identified by NSN 4110016717250 and part number GBE21ASKSS or GBE21DYKFS, manufactured by General Electric Company DBA GE. Delivery is required within 20 days after the delivery order, to the destination located at V30667, MSRON TEN, 6801 Roosevelt Blvd, Building 938, Jacksonville, FL 32212, under FOB Destination terms with zero variance allowed in quantity. The unit must be packaged and preserved in strict accordance with MIL-STD-2073-1E using Packaging Code U, with preservation method 10 (clng/dry), and no cushioning, wrap, or preservation materials specified. Marking and labeling must comply fully with MIL-STD-129, including machine-readable barcodes, and no special marking is required. The contract prohibits the use of R290A refrigerant on naval vessels, permitting only R134A and R404A, and requires adherence to DLA’s packaging and procurement standards. Transportation must be traceable; parcel post is forbidden. The contract value is $2,116.00 for a single unit fixed-price line item, with payment processing mandated through the Wide Area WorkFlow system. All supplies are subject to destination inspection and acceptance by the government. Technical and quality requirements referenced in the DLA Master List must be met, along with applicable clauses including safeguarding covered defense information, cyber incident reporting, and prohibition of hazardous materials like hexavalent chromium. The contractor must maintain active SAM registration, provide UEI and CAGE codes, and comply with whistleblower rights, subcontracting rules, and electronic payment requirements. No option periods, additional quantities, or expanded scope beyond the single unit are included. The award basis and evaluation criteria are not detailed in the provided documentation.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

CAP, SEAL, VALVE STEM

Solicitation # SPE8E8-26-T-4931

The contract pertains to the procurement of 26 units of CAP SEAL VALVE STEM, identified by NSN 4130017335794 and part number 6065384-4, under solicitation SPE8E8-26-T-4931 issued by DLA Dist San Joaquin. The total contract value is $26.00 with a unit price of $1.00 per unit, and delivery is required within 143 days after the date of order, with a need ship date of January 4, 2027, and original required delivery date of February 24, 2027. Delivery is FOB origin, and acceptance and inspection occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must fully comply with MIL-STD-2073-1E, including dry preservation method, clean and dry storage conditions, and no preservation materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA Packaging Requirements for Procurement (RP001). The contractor is obligated to comply with all applicable defense and federal regulations, including the Hazard Communication Standard (29 CFR 1910.1200), submission of Safety Data Sheets for any hazardous materials, and labeling in accordance with MIL-STD-129 for hazardous and radioactive substances. The contract incorporates multiple FAR and DFARS clauses including 52.219-28 for small business representation, 252.204-7012 for safeguarding covered defense information, 52.240-93 for basic safeguarding of contractor information systems, and 52.232-39 and 52.232-40 for unauthorized obligations and accelerated payments to small business subcontractors. Invoicing must be processed through WAWF, and the contractor must be registered on the WAWF portal. An affirmative response to whether the contractor will provide covered defense telecommunications equipment triggers additional disclosure requirements including UEI, CAGE code, and entity roles. The offeror must also certify size status and socioeconomic qualifications such as Small Business, SDVOSB, HUBZone, or WOSB. Technical and quality requirements are referenced from

DLA DIST SAN JOAQUIN

POSTED

about 8 hours ago

DEADLINE

FILTER ELEMENT, AIR

Solicitation # SPE8E8-26-T-4937

The contract specifies the procurement of one air filter element with NSN 4130017362705 and part number 332/X6963 from JCB INC., with a delivery requirement of five days FOB origin, no quantity variance allowed, and inspection and acceptance occurring at the destination. The item must be packaged in compliance with ASTM D3951 and marked and labeled according to MIL-STD-129, with palletization adhering strictly to DLA’s RP001 packaging requirements. All technical and quality specifications referenced by R or I numbers in the DLA Master List of Technical and Quality Requirements take precedence over ASTM standards. Shipping must occur via traceable freight methods; parcel post is prohibited. Delivery is directed to two locations: one to Camp Lejeune, NC for the 2nd Combat Engineer Battalion and another to Blount Island, Jacksonville, FL for the Maritime Prepositioning Force. Each shipment has distinct freight and parcel post addresses, tracking numbers, RDDs, project codes, and government-use identifiers. The original required delivery dates are May 27, 2026, and June 30, 2026, respectively, under solicitation SPE8E8-26-T-4937, issued by the Defense Logistics Agency under NAICS code 333415. Unit of issue is each, with a unit price of $1.00 for the first quantity and $5.00 for the second, totaling six units across two CLINs.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

SPEK Field Kitchen Kit AssemblyThe contract entails the complete integration of TRH, burners, FSU, and associated support components into standardized, deployable SPEK field kitchen units designed for rapid deployment in military operations. All subsystems must be seamlessly assembled to meet rigorous durability, safety, and performance standards required for field use under austere conditions, ensuring consistent operational readiness across diverse environments. The work involves precise manufacturing, testing, and validation processes to guarantee uniformity and reliability across all units produced under this agreement. The contract is classified as a subcontract under the NAICS code 333415, issued by the Defense Logistics Agency within the Department of Defense, with a posting date of August 1, 2026. Performance will occur at locations designated by the agency, though specific geographic details are not provided. The units produced will support field feeding capabilities for U.S. military personnel, with an emphasis on modularity, ease of transport, and quick setup. All components must comply with defense specifications and undergo final inspection prior to delivery to ensure mission-critical functionality in operational theaters.

Defense Logistics Agency

POSTED

DEADLINE

Airtronic Burner Supply and IntegrationThe contract involves the supply and integration of Airtronic burners into field kitchen systems, ensuring full compliance with military fuel efficiency and safety standards. This subcontract is aimed at enhancing the operational capabilities of field kitchens by incorporating advanced burner technology that meets rigorous Department of Defense requirements for performance, reliability, and environmental adaptability in tactical environments. The work is tied to the NAICS code 333415, indicating industrial machinery manufacturing, with the Defense Logistics Agency serving as the overseeing agency under the Department of Defense. Integration activities include technical modifications and testing to ensure seamless compatibility with existing field kitchen infrastructure, along with documentation and quality assurance protocols to validate adherence to military specifications. Although no specific location is listed for performance or delivery, the contract supports logistical operations across military deployments. The solicitation was posted on August 1, 2026, and the agreement is referenced under contract number SPE3SE26D0003 with delivery order SPE3SE26F0828.

Defense Logistics Agency

POSTED

DEADLINE

Tray Ration Heater (TRH) Systems AssemblyThe contract involves the full assembly and integration of Tray Ration Heaters designed for military field operations, encompassing all essential components such as fuel lines, sensors, mounting brackets, and associated collateral equipment. The work is to be performed under a subcontract as part of a larger program managed by the Defense Logistics Agency under the Department of Defense, with the project classified under NAICS code 333415 for other commercial and industrial machinery manufacturing. The heater systems must meet rigorous military standards for reliability, durability, and performance in demanding operational environments. The contract is publicly listed with a posting date of August 1, 2026, and is tied to the primary contract SPE3SE26D0003 with delivery order SPE3SE26F0828, indicating it is part of a coordinated procurement effort to support field rations for U.S. military personnel.

Defense Logistics Agency

POSTED

DEADLINE

HVAC Unit Supply (Equipment Procurement)The contract entails the procurement and delivery of a complete commercial HVAC unit package for installation in Huntsville, TX, as defined by detailed technical specifications. The scope of work is focused on supplying all necessary equipment to meet performance, efficiency, and compliance standards outlined in the documentation, with no customization or design changes permitted without formal approval. The contract is classified as a subcontract under NAICS code 333415, indicating it involves the manufacturing of heating, ventilation, and air conditioning equipment. Issued by the Texas Department of Criminal Justice under the Texas SmartBuy program, the solicitation was posted on July 31, 2026, with responses due by August 21, 2026. There is no designated set-aside or preference category, and the place of performance is fixed at Huntsville, TX, requiring the vendor to account for local delivery logistics and installation readiness. All equipment must be delivered in fully operational condition, ready for prompt installation by authorized personnel, with no provision for partial shipments unless explicitly agreed upon. The contract requires strict adherence to all technical and regulatory requirements, and failure to meet specifications may result in rejection or termination.

Texas Department of Criminal Justice

POSTED

DEADLINE

HVAC Unit Supply (Equipment Procurement)The contract is for the procurement and delivery of a complete, manufacturer-certified HVAC unit package to be installed at the Garza East Unit in Beeville, Texas, under a subcontract awarded by the Texas Department of Criminal Justice. The equipment must meet all manufacturer specifications and certifications to ensure proper performance and compliance with facility requirements. The solicitation was posted on July 31, 2026, with a firm response deadline of August 21, 2026, and falls under the NAICS code 333415, which corresponds to HVAC equipment manufacturing. Performance of the contract is specifically tied to the Garza East Unit, necessitating coordination for delivery and installation at that location. All submissions must be managed through the Texas SmartBuy portal, and full compliance with the terms of the subcontract is required to fulfill obligations.

Texas Department of Criminal Justice

POSTED

DEADLINE

Air Conditioning Flush Kit SupplyThe contract involves the supply of air conditioning flush kits as discrete hardware components for federal logistics delivery, specifically designated under NAICS code 333415 for air conditioning and refrigeration equipment manufacturing. It is structured as a subcontract with a response deadline of August 5, 2026, and was posted on July 31, 2026. The placing agency is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania, at zip code 17070-5002. The components must meet federal logistics specifications and are intended for use in military or defense-related air conditioning systems, requiring precise adherence to technical and delivery standards. While no set-aside designation or point of contact is provided, all bids must be submitted through the DIBBS portal linked in the contract notice.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

FLUSH KIT, AIR CONDI

Solicitation # SPE8E8-26-T-4482

The contract pertains to the procurement of a Flush Kit for Air Conditioning, identified by NSN 4130-01-615-4267 and part number 39MA660001, with a quantity of 12 units. The item must be delivered FOB origin within 167 days, with a required ship date of December 21, 2026, and an original delivery deadline of October 15, 2026. Inspection and acceptance occur at the destination, and no quantity variance is permitted. All packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 packaging requirements, and the DLA Master List of Technical and Quality Requirements takes precedence over any other standard. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with parcel and freight shipping addresses specified accordingly. The contract is governed by DLA procedural notes C19 and C20 for transportation and first destination shipment. The solicitation number is SPE8E8-26-T-4482, issued under a federal procurement with NAICS code 333415, and the unit price is $12.00, for a total price of $144.00. All supplies are subject to potential Covered Defense Information requirements, and government identification must be removed from non-accepted items. The point of contact is Alexis Selby, reachable via email and phone provided.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

MERV 10+ Disposable Pleated Air Filter SupplySpokane Public Schools is seeking suppliers to provide disposable pleated air filters with MERV ratings of 10, 13, and 14 in a variety of sizes to support the maintenance and air quality standards of its HVAC systems across school facilities. The contract is structured as a subcontract with a response deadline of August 21, 2026, and is categorized under NAICS code 333415, which relates to heating, ventilation, and air conditioning equipment manufacturing. The filters must meet specific performance criteria to ensure effective particulate filtration and compatibility with existing HVAC infrastructure in the district’s buildings. All deliveries are expected to be performed at locations within Washington State where the schools operate, and suppliers must be prepared to meet ongoing demand with consistent product quality and reliable logistics. This solicitation is open to qualified vendors who can demonstrate capacity to supply the required filter types at competitive pricing and within established delivery timelines.

Spokane Public Schools

POSTED

DEADLINE

High-Efficiency Split-System HVAC Unit SupplyThe contract requires the supply of new high-efficiency split-system HVAC units designed for installation in Ottawa, with strict performance criteria including a minimum 16 SEER cooling efficiency and 96% AFUE heating efficiency. All units must use environmentally compliant refrigerants, specifically R-454B or R-32, and must fully conform to ASHRAE standards and Canadian building codes to ensure safety, energy efficiency, and regulatory alignment. The units are intended for use by the U.S. Embassy in Ottawa under the Department of State, necessitating reliable performance in a cold climate with precise temperature control and low environmental impact. This is a subcontract opportunity posted on July 31, 2026, with a response deadline of August 21, 2026. The North American Industry Classification System code 333415 applies, indicating the focus on commercial and industrial HVAC equipment manufacturing. There is no set-aside designation specified, and the place of performance is limited to Ottawa, meaning all equipment must be delivered and ready for installation at that location. The contract does not include details on the point of contact or specific procurement procedures beyond the submission deadline, and interested parties should refer to the linked SAM.gov portal for additional instructions or requirements not stated in the public posting.

Usembassy Ottawa

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

Bevel Gear Manufacturing and SupplyThe contract entails the manufacture and supply of precision bevel gears designated by NSN 3020-01-363-8103, specifically for use in heavy vehicle systems, with a potential delivery of up to 23 units under an indefinite delivery arrangement. These components will be distributed to both domestic and international government locations, ensuring operational readiness across a broad range of military and defense applications. The solicitation is structured as a subcontract with a total small business set-aside designation, reserved exclusively for small businesses under SBA guidelines as defined by FAR 19.5, with the NAICS code 333613 classifying it under the manufacturing of other agricultural, construction, and mining machinery. The contract was posted on August 2, 2026, with a response deadline of August 17, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. While specific performance locations and point of contact details are not provided, the procurement is administered through the DLA Dibbs platform, indicating its alignment with defense logistics protocols. All manufacturing must meet the stringent quality and technical standards required for defense-grade precision gearing, and the set-aside status ensures participation is limited to qualified small businesses capable of delivering reliable, mission-critical components under tight timelines.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Small Business Compliance and Representation ServicesThe contract titled Small Business Compliance and Representation Services is a subcontract issued under a Total Small Business Set-Aside by the Department of Defense’s Strategic Acq Program Directorate, targeting businesses certified as small under SBA guidelines. It requires comprehensive consulting support focused on small business representation, including accurate UEI and CAGE code management, and strict adherence to FAR 52.219-28 regulations governing small business subcontracting plans. The work is intended to ensure full compliance with federal sourcing requirements and proper documentation for small business status verification and reporting. The solicitation was posted on August 2, 2026, with responses due by August 17, 2026, and falls under NAICS code 541611 for management consulting services. The contract is administered through the DIBBS platform and does not specify a place of performance or point of contact, indicating possible remote or nationwide performance. Bidders must be small business entities eligible for the set-aside and capable of delivering expert guidance on federal contracting compliance, particularly in maintaining accurate representations and managing documentation critical to small business status under government procurement rules.

Administrative Management and General Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

Domestic Freight and Transportation LogisticsThe contract is for domestic freight and transportation logistics to deliver ventilators to locations within the United States, requiring proof of delivery and compliance with WAWF-DS for electronic documentation. It is a subcontract awarded under a Total Small Business Set-Aside classification, exclusively available to small businesses as defined by the SBA, with the NAICS code 484220 specifying freight transportation services. The U.S. Department of Defense, through its Strategic Acquisition Program Directorate, is the contracting organization, and the performance location spans multiple U.S. destinations without specific geographic restrictions listed. Interested parties must submit responses by the deadline of August 17, 2026, with the solicitation originally posted on August 2, 2026. All deliveries must be trackable and verified through official electronic systems to meet federal logistics and accountability standards.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

MIL-STD-129 and Commercial Packaging ServicesThe contract requires full compliance with MIL-STD-129 for labeling and marking of military shipments, ensuring all packaging meets standardized military specifications for identification, tracking, and handling. It also mandates adherence to RP001 palletization guidelines to ensure secure, uniform, and efficient loading and transport of cargo across defense logistics networks. All work must be performed by a small business as this is a total small business set-aside under SBA regulations, with the NAICS code 323111 indicating printing and related support activities. The solicitation is open for bid through August 17, 2026, and is issued by the Strategic Acquisition Program Directorate under the Department of Defense with performance expected to support military logistics operations. The subcontract is publicly accessible through the DIBBS platform, and successful bidders must demonstrate proven capability in military packaging standards without deviation.

Commercial Printing (except Screen and Books)

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThis contract seeks specialized packaging, labeling, and safety data sheet preparation services for hazardous materials in strict alignment with TQ IP025 and FED-STD-313 standards. It is structured as a subcontract under a Total Small Business Set-Aside, exclusively open to small businesses as defined by the SBA, ensuring that only eligible small business firms may bid. The North American Industry Classification System code 493190 applies, indicating the work involves other support activities for transportation, specifically tailored to hazardous material handling. The solicitation was posted on August 2, 2026, with responses due by August 17, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Performance locations are not specified, and no point of contact is listed. The full details and submission portal are accessible through the DIBBS platform using the provided link.

Other Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Supply of NSN 5330-01-181-4905 Seal Components with Military Packaging and LabelingThe contract calls for the procurement and delivery of 19 military-specification seals identified by NSN 5330-01-181-4905, with strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling requirements. All items must be properly marked and packaged in compliance with federal military standards, including handling of any hazardous materials if present, ensuring readiness for immediate use upon arrival. Delivery is specified as FOB Origin, meaning the buyer assumes all risks and responsibilities once the goods leave the supplier’s facility, with final acceptance occurring at the destination point. This is a small business set-aside subcontract under the SBA program, exclusively available to businesses certified as small under the NAICS code 332998. The solicitation was posted on August 2, 2026, with a submission deadline of August 17, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. The contract does not specify a physical location for performance or a point of contact, and the procurement is conducted through the DLA DIBBS platform, requiring vendors to participate electronically via the provided link to submit their proposals.

Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance NotificationThis contract requires the identification and timely notification of any radioactive or hazardous materials present in knives or their components to ensure compliance with DFARS 52.223-7. The subcontractor must thoroughly examine all items supplied under this agreement and immediately inform the government of the presence of such materials, maintaining strict adherence to regulatory requirements for defense-related procurement. The obligation applies to all phases of production and delivery, with no allowance for omission or delay in reporting. The solicitation is classified under NAICS code 541690 and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. The deadline for responses is August 17, 2026, with the request posted on August 2, 2026. Performance location and point of contact details are not specified, but the contract must be fulfilled in alignment with federal defense standards. Interested parties must access the official DIBBS portal using the provided link to submit their proposed compliance procedures and demonstrate capability to meet the specified reporting obligations without delay.

Other Scientific and Technical Consulting Services

POSTED

about 8 hours ago

DEADLINE

Specialized Packaging and Palletization ServicesThe contract requires the provision of military-compliant packaging, preservation, and palletization services for combat knives in strict accordance with Department of Defense standards, including RP001 and ASTM D3951. All work must ensure the protection, durability, and readiness of the knives during storage and transportation, with adherence to specified military packaging protocols for environmental resilience, rust prevention, and structural integrity. The scope encompasses complete handling from final product preparation through secure palletization, ensuring each unit meets rigorous defense logistics requirements. This subcontract opportunity is issued by the Strategic Acquisition Program Directorate under the Department of Defense, with a response deadline of August 17, 2026. The NAICS code 493190 categorizes the work under Other Transportation Support Activities, indicating the focus on specialized logistics and handling services rather than manufacturing. The place of performance and point of contact details are not specified, but compliance with all technical and procedural standards outlined in referenced military specifications is mandatory. Interested parties must submit proposals prior to the deadline to be considered for award.

Other Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Combat Knife Manufacturing and SupplyThe contract entails the manufacture and delivery of 1,864 combat knives adhering to strict technical specifications, including requirements for packaging, labeling, and secure transportation. All items are classified as ITAR-controlled defense articles, mandating full compliance with U.S. export control regulations and restricting unauthorized disclosure or transfer. The work must be performed under the authority of the Strategic Acq Program Directorate within the Department of Defense, with a deadline for responses set for August 17, 2026. The NAICS code 332994 indicates classification under Other Fabricated Metal Product Manufacturing, reflecting the specialized production capabilities required. The contract is structured as a subcontract and is publicly accessible via the DIBBS platform under solicitation number SPE7LX26U9128, though specific performance location and point of contact details are not provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 8 hours ago

DEADLINE

Packaging and Palletization Services for Fragile GoodsThe contract requires the provision of packaging, cushioning, and palletization services for fragile vehicular windows in full compliance with MIL-STD-129 standards, utilizing GF cushioning materials specifically designated for glass protection. All shipments must be marked with the special coding identifier '36' to indicate glass content and ensure proper handling throughout the supply chain. The work must be performed under a Total Small Business Set-Aside as defined by FAR 19.5, limiting participation to small businesses certified by the SBA. The North American Industry Classification System code for this solicitation is 561910, categorizing it under Other Support Activities for Transportation. The contract is issued under the Department of Defense’s Strategic Acquisition Program Directorate with a response deadline of August 17, 2026, and is classified as a subcontract opportunity. The place of performance and exact location details are unspecified, but work must align with the DOD’s logistical and handling protocols for fragile glass components.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe contract requires identification of hazardous materials within packaging and components, along with the preparation of Safety Data Sheets that comply with OSHA standards under 29 CFR 1910.1200, ensuring proper hazard communication and documentation. It also mandates that all labeling adheres to both federal regulations and military standards, specifically MIL-STD-129, to support uniform military logistics and safety protocols. The scope encompasses full compliance with hazardous material handling procedures from identification through labeling and documentation, requiring technical expertise in regulatory frameworks and military specification alignment. This is a subcontract set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program, with the NAICS code 541690 indicating it falls under Other Scientific and Technical Consulting Services. The solicitation was posted on August 2, 2026, with responses due by August 17, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. The place of performance and point of contact information are not specified, but the work is likely tied to defense logistics operations, requiring strict adherence to both civilian safety regulations and military documentation standards.

Other Scientific and Technical Consulting Services

POSTED

about 8 hours ago

DEADLINE

Vehicular Window Supply and DeliveryThe contract pertains to the supply and delivery of military-spec vehicular windows identified by NSN 2510015665005 under an indefinite-delivery arrangement, requiring the subcontractor to fulfill orders in strict accordance with technical specifications, packaging standards, and FOB origin or delivery terms. All work must meet rigorous military quality and performance benchmarks, ensuring compatibility and reliability in operational environments. The solicitation is exclusively open to small businesses under a Total Small Business Set-Aside as defined by FAR 19.5, with the NAICS code 336399 categorizing the work within other transportation equipment manufacturing. The procuring entity is the Strategic Acquisition Program Directorate within the Department of Defense, and the response deadline is August 17, 2026, with the solicitation posted on August 2, 2026. Delivery performance is tied to FOB terms, meaning the subcontractor bears responsibility for logistics and compliance from the point of origin through to final destination as specified in each order.

All Other Motor Vehicle Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE