Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Compliance & Safety Data Sheet (SDS) Management

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates the identification, classification, and thorough documentation of all hazardous components within the strap assembly, ensuring full compliance with OSHA and DFARS regulations. This includes the preparation of accurate Safety Data Sheets (SDS) that detail the chemical composition, physical and health hazards, safe handling procedures, and emergency response measures for each hazardous element. Hazard labeling must be applied in strict accordance with standardized requirements to ensure visibility, clarity, and regulatory adherence throughout the supply chain and use lifecycle of the product. The work is scoped for performance at Robins Air Force Base with a zip code of 31098-1887, and the contract falls under NAICS code 541620, indicating it is a professional, scientific, and technical service related to environmental and safety consulting. It is designated as a subcontract with a response deadline of August 13, 2026, and was posted on August 5, 2026, under the Department of Defense’s ASC Supplier Oper AE and AF Division. All deliverables must meet federal defense standards, and compliance with both occupational safety and defense acquisition regulations is non-negotiable. The contractor is expected to maintain rigorous documentation practices to support audits and ensure traceability of hazard management efforts.

General Info

Identify, classify, and document hazardous components in strap assembly per OSHA and DFARS at Robins AFB by August 13, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identification, classification, and documentation of hazardous components in the strap assembly, including SDS preparation and hazard labeling per OSHA and DFARS requirements.

Similar Contracts

Same NAICS industry code

F--VAMMS Unit design Optimization of vehicle add-on m

Solicitation # 68HERW26R0072

The Environmental Protection Agency’s Tribal & Science Division Water is seeking proposals to optimize the design of a vehicle add-on mobile smoke monitoring system under solicitation number 68HERW26R0072. This effort, identified by NAICS code 541620, aims to enhance the functionality, efficiency, and deployment capabilities of the VAMMS unit for real-time smoke detection and analysis during environmental incidents. Proposals must be submitted by August 13, 2026, at 4:00 PM Eastern Time, with the solicitation posted on July 30, 2026. The work is to be performed in support of the EPA’s broader environmental monitoring mission, with the primary point of contact being Kasual Sharp at the agency’s office in Cincinnati, Ohio. The contract is open to all eligible entities without specific set-asides, and responses should address technical innovation, system integration, durability under field conditions, and the ability to provide accurate, timely smoke data from mobile platforms. All communication and submissions must be directed through the designated point of contact, and interested parties are encouraged to review the official solicitation on SAM.gov for detailed technical requirements and evaluation criteria. The success of this project hinges on delivering a scalable, reliable, and cost-effective upgrade to existing monitoring capabilities that aligns with federal environmental response protocols.

Tribal & Science Division Water

POSTED

about 5 hours ago

DEADLINE

USDA Forest Service Land Management Integrated Resources (LMIR) BPAs Land Mgmt Plan for Greater Sage Grouse

Solicitation # 1284LM26Q0117

The USDA Forest Service is preparing to issue a competitive Blanket Purchase Agreement (BPA) Call Order under the Land Management Integrated Resources (LMIR) BPA to secure professional environmental consulting services in support of the Greater Sage-Grouse Programmatic Land Management Plan Amendment. The work will encompass the full spectrum of environmental analysis from evaluating public scoping comments through to the development of the final Record of Decision, aligning with NEPA requirements. This BPA Call Order is restricted exclusively to firms already approved and listed on the LMIR BPA, with 150 pre-qualified contractors receiving direct notification via email. The requirement is structured as a total small business set-aside under NAICS code 541620 and is being administered by the USDA Forest Service’s Intermountain Region office in Ogden, Utah, with performance centered in Fort Collins, Colorado. This notice serves solely as a synopsis of intent and is not a solicitation for proposals; no response is required at this stage. The actual Call Order Request for Quotations will be distributed via email to BPA holders, and any amendments will follow the same channel. The LMIR BPA itself is an ongoing, nationwide multiple-award contract accessible to all federal agencies, and new vendors may apply to join at any time by contacting the LMIR team. The deadline for responses to the forthcoming Call Order is August 6, 2026, with JoAnne Meiers listed as the primary point of contact for inquiries. Contractors are directed to SAM.gov using solicitation number 12363N23Q4023 for general BPA details, but should reach out directly to joanne.meiers@usda.gov for access to Attachment C04g, which is incompatible with SAM.gov’s system.

Csa Intermountain 2 Usda-Fs

POSTED

about 5 hours ago

DEADLINE

Civic Center and Downtown West End Gateway Project Supplemental Environmental Impact Report

Solicitation # PL25-0104

The project, located in downtown Napa, California, at 1251/1351 Second Street, 820 Randolph Street, and 801/809 Coombs Street, encompasses a 1.44-acre site targeted for comprehensive redevelopment under municipal entitlements. The primary components include the adaptive reuse of the historic Franklin Station Post Office building—a locally designated landmark and National Register property—into a five-story upscale hotel with up to 120 guest rooms, a rooftop café and bar, a restaurant, and event and meeting spaces. Adjacent to this, a new five-story structure is planned for the former parking lot parcel to house up to 37 branded residential for-sale units, along with shared amenities and ground-floor retail. An additional three existing condominium units in the adjacent Young Building will be integrated into the residential component, bringing the total for-sale hotel units to 40. All development is designed to include on-site parking and ground-floor retail, with the project sites identified by multiple APNs spanning several parcels. The redevelopment is authorized through a series of entitlements including a Development Agreement, Zoning Amendment to the PD-37 Planned Development Overlay, Tentative Parcel Map, Certificate of Appropriateness, and Design Review Permit, all required due to the site's historic status and mixed-use nature. The project is administered under the jurisdiction of the City of Napa as the lead agency, with regulatory review governed by the California Environmental Quality Act (CEQA), including compliance with CEQA Guidelines Sections 15162, 15163, 15164, and 15168. An Environmental Impact Report was prepared and supplemented with addenda, and a Negative Declaration was also adopted for certain components, concluding that environmental impacts would be mitigated to less than significant levels. The State Clearinghouse Number 2010042043 has been assigned and all documents are available for public inspection at the City’s Community Development Department. Key contacts include Ryder Dilley, Planning Manager, and James Keller, the applicant/property owner. There is no indication of federal contracting mechanisms such as FAR clauses, federal payment systems, accounting codes, or procurement types; instead, the process is purely local, centered on land use approvals, environmental compliance, and historic preservation. No contract value is specified, as this is not a federal acquisition but a municipal land use and development entitlement process, with payments such as environmental filing fees handled locally

POSTED

about 10 hours ago

DEADLINE

Wetlands and Aquatic Resources Technical Support

Solicitation # 68HERW26R0034

The U.S. Environmental Protection Agency is seeking qualified contractors to provide Wetlands and Aquatic Resources Technical Support under solicitation 68HERW26R0034, with a response deadline of August 13, 2026. This federal procurement is set aside by the Small Business Administration and falls under NAICS code 541620, indicating it is for environmental consulting services. The contract will support technical efforts related to wetland and aquatic resource management, likely involving data analysis, field assessments, regulatory compliance, and scientific reporting to aid EPA programs. The work will be performed remotely or at various locations as needed, with no specific place of performance designated, and all communications and submissions must be directed through the contracting officer, Keith Pfeffer, reachable via email at pfeffer.keith@epa.gov. The solicitation was posted on the FedConnect platform on July 13, 2026, and interested parties must respond before the close of business on the deadline date to be considered.

POSTED

about 13 hours ago

DEADLINE

Environmental Compliance and MonitoringThe contract encompasses environmental compliance and monitoring services for construction projects within the City of Austin, focusing on stormwater management, erosion and sediment control inspections, and the preparation of required compliance reports. The work involves regular field visits to ensure adherence to local, state, and federal environmental regulations throughout the construction lifecycle, with an emphasis on preventing pollution and minimizing environmental impact. All activities must be documented and reported systematically to maintain regulatory compliance and support the city’s environmental protection goals. The contract is structured as a subcontract under NAICS code 541620, indicating it falls under environmental consulting services. It was posted on August 5, 2026, with a deadline for responses set for August 27, 2026. All services are to be performed in alignment with the City of Austin’s environmental standards, and the place of performance is tied to construction sites within the city’s jurisdiction. While specific performance locations and contact details are not provided, the solicitation is managed through the City of Austin’s finance and procurement systems, requiring interested parties to submit responses through the official portal prior to the stated deadline.

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials & HAZCOM ComplianceThe contract requires strict adherence to OSHA HAZCOM standards and MIL-STD-129 for the proper labeling, handling, and packaging of all hazardous materials involved in manufacturing or packaging operations, ensuring that all documentation, signage, and safety procedures meet federal regulatory requirements. A critical prohibition is included against the use of hexavalent chromium in any form within the processes covered by this agreement, aligning with environmental and worker safety mandates. Performance is to occur at the designated location in Texarkana, Texas, with all activities governed by the specifications outlined in the referenced standards to maintain consistency and compliance across the supply chain. The subcontract is classified under NAICS code 541620 and is issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 13, 2026, and a posting date of August 5, 2026. All parties must ensure that packaging and labeling comply with MIL-STD-129 for uniformity and traceability, while HAZCOM obligations require accessible safety data sheets, employee training, and hazard communication protocols. Failure to comply with the hexavalent chromium prohibition or labeling standards may result in contract violation, necessitating rigorous internal controls and audits to demonstrate ongoing adherence throughout the contract period.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive identification, labeling, and documentation of all hazardous materials utilized in the alarm control unit, ensuring full adherence to regulatory standards. This includes the timely submission of Safety Data Sheets (SDS) for each hazardous substance, with accuracy and completeness verified against current federal and industry requirements. The work must align with environmental, health, and safety regulations to mitigate risks associated with handling, storage, and disposal of these materials within the alarm control unit system. Performance is to be carried out for the ASC COMMODITIES DIVISION under the Department of Defense, with the place of performance located in Tracy, California, 95304-5000. The contract is classified as a subcontract under NAICS code 541620, indicating professional, scientific, and technical services related to environmental, health, and safety engineering. Responses are due by August 13, 2026, with the solicitation posted on August 5, 2026, and must be submitted through the designated DIBBS platform to ensure eligibility and compliance with procurement protocols.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Environmental Compliance & MonitoringThe contract under the title Environmental Compliance & Monitoring seeks a subcontractor to implement and maintain stormwater management systems and erosion control measures at a specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The scope of work includes regular inspections to ensure adherence to environmental regulations, as well as the preparation and submission of detailed environmental reporting documentation. The contractor is expected to support compliance with federal and local environmental standards tied to construction or land disturbance activities associated with the Department of Defense. The North American Industry Classification System code 541620 categorizes this as an environmental consulting service, indicating a need for专业 technical expertise in environmental monitoring and regulatory compliance. Bid responses are due by August 17, 2026, with the solicitation posted on August 5, 2026. The contract is issued under the Land Supply Chain organization within the Department of Defense, and the performance location is fixed at the specified address. While the solicitation number and point of contact details are not provided, interested parties must respond through the DIBBS portal using the provided UI link. This subcontract does not specify a type of set aside, meaning it is open to all eligible businesses without preference for small, minority-owned, or other designated categories.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance & Safety LabelingThe contract governs the identification, handling, and labeling of hazardous materials within defense manufacturing and packaging operations, ensuring full adherence to OSHA's Hazard Communication Standard and Defense Logistics Agency requirements. Work must be performed in strict compliance with federal safety regulations to protect personnel, maintain operational integrity, and support defense supply chain readiness. The scope includes accurate material classification, proper signage, safety data sheet management, and labeling protocols aligned with updated regulatory frameworks. This is a subcontract categorized under a Women-Owned Small Business Set-Aside, with the NAICS code 541620 indicating environmental consulting and related services. The solicitation was posted on August 5, 2026, and responses are due by August 20, 2026. The work is performed under the purview of the Strategic Acquisition Program Directorate within the Department of Defense. All activities must align with federal defense contracting standards, and the successful bidder must demonstrate proven expertise in hazardous materials compliance within government-contracted manufacturing environments.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires identification of hazardous components within protective covers, preparation and submission of complete Safety Data Sheets in accordance with regulatory standards, and validation that all labeling complies with OSHA’s Hazard Communication Standard before any delivery occurs. The work is tied to ensuring that material safety information is accurate, accessible, and properly displayed to protect personnel and meet federal compliance requirements. All activities must be completed prior to shipment or handover of the protective covers to ensure full regulatory alignment. This subcontract falls under NAICS code 541620 and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026. While specific performance location details are not provided, the requirement centers on compliance with federal hazardous materials communication protocols, and the work is intended to support defense-related procurement activities through rigorous safety documentation and labeling processes.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Sustainable Procurement AdvisoryThe contract mandates expert guidance and verification to ensure compliance with FAR 52.223-23 regarding the procurement of sustainable products, requiring all materials to align with EPA environmental standards for federal acquisitions. The work centers on assessing supply chains and product specifications to confirm adherence to federal sustainability mandates, with a focus on reducing environmental impact through approved materials and practices. Performance is tied to Robins AFB, Georgia, with the scope extending to oversight of subcontracted efforts within the Department of Defense procurement framework. This subcontract, classified under NAICS code 541620 for environmental consulting, is open for response until August 17, 2026, and was posted on August 5, 2026. It is not subject to any specific set-aside designation and operates under the Warner Robins office of the Department of Defense. Contractors must demonstrate proficiency in federal sustainability regulations and possess the capacity to audit and validate environmental compliance across product lines. The work is critical to supporting defense logistics through environmentally responsible sourcing, with all deliverables expected to meet stringent federal guidelines for green procurement.

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract titled Hazardous Materials Compliance and SDS Management requires the identification of hazardous components within materials and systems used in defense-related construction and equipment manufacturing, with full adherence to OSHA’s Hazard Communication Standard for the preparation of accurate Safety Data Sheets. It mandates strict compliance with both DFARS and FAR regulations governing hazardous materials, ensuring that all documentation, handling, storage, and disposal practices meet federal defense standards. The work is to be performed at a designated location in Barstow, California, with a response deadline of August 17, 2026, and is structured as a subcontract under NAICS code 541620, indicating specialized environmental and technical services for the Department of Defense. All activities must be completed with precision to support operational safety and regulatory accountability across the defense supply chain.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Electrical Insulation Tape Supply

Paint and Coating Manufacturing

POSTED

DEADLINE

Export-Controlled Technical Data ManagementThis contract requires the secure management and governance of technical data subject to International Traffic in Arms Regulations and Export Administration Regulations, ensuring full compliance with Defense Federal Acquisition Regulation Supplement clause 252.225-7048 and the US/Canada Joint Certification Program. The subcontractor must implement controls to safeguard sensitive defense-related information, including physical, digital, and procedural safeguards, and maintain strict access limitations to authorized personnel only. Compliance with all applicable export control laws is mandatory throughout the performance period, with documented procedures for handling, storing, transmitting, and destroying controlled technical data. The work is to be performed at Tinker Air Force Base, Oklahoma, under a subcontracting arrangement issued by the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV. The NAICS code 541690 indicates this pertains to other scientific and technical consulting services, suggesting the subcontractor will provide specialized expertise in export control compliance and data security rather than manufacturing or direct production. Responses are due by August 13, 2026, and the solicitation was posted on August 5, 2026, indicating a short turnaround for qualified vendors to demonstrate capability in meeting stringent regulatory requirements for defense-related technical data.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Packaging, Labeling, and Marking ComplianceThis contract requires full compliance with U.S. military packaging, labeling, and barcoding standards including MIL-STD-2073-1E for protective packaging, MIL-STD-129 for uniform labeling and barcoding of military shipments, and DLA RP001 for defense logistics agency requirements. All items must be properly marked with standardized barcodes and hazard labels where applicable, ensuring safe handling and identification of hazardous materials in accordance with Department of Defense regulations. The work must be performed to support military supply chain operations with exacting precision in documentation, marking, and packaging integrity. The solicitation is classified as a subcontract under NAICS code 561910 for other support services and was posted on August 5, 2026, with a response deadline of August 13, 2026. Performance is designated for Tinker Air Force Base, Oklahoma, 73145-8000, under the oversight of the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. All parties must adhere strictly to the specified standards and timelines to meet operational readiness requirements for military logistics.

Packaging and Labeling Services

POSTED

DEADLINE

Surface Treatment and Coating ServicesThe contract pertains to surface treatment and coating services for aluminum components requiring oxygen-compatible durability, specifying the application of anodizing, chemical film, and plating processes in strict compliance with MIL-A-8625, QQ-A-601F, and MIL STD 453 standards. These military specifications ensure the coatings provide the necessary corrosion resistance, electrical insulation, and material integrity under high-oxygen environments, critical for aerospace and defense applications. The work is to be performed at Tinker Air Force Base, Oklahoma, with a response deadline of August 13, 2026, and the solicitation was posted on August 5, 2026. This is a subcontract opportunity under NAICS code 332812, falling under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, indicating it targets specialized providers capable of meeting exacting military surface treatment requirements.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Precision Machining of Aerospace CouplingsThe contract involves the high-precision machining of aluminum alloy liquid oxygen seat couplings that must meet stringent aerospace industry standards including QQ-A-200/8F for aluminum alloy specifications, MIL-A-8625 for anodic coating requirements, and MIL SPEC 21180D for dimensional and functional performance criteria. The work is classified as a subcontract under NAICS code 332721 and is solicited by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with performance required at Tinker Air Force Base, Oklahoma, zip code 73145-8000. All deliverables must adhere to exacting quality controls and documentation standards expected for critical aerospace propulsion components, ensuring compatibility and safety in oxygen-rich environments. The solicitation was posted on August 5, 2026, with a mandatory response deadline of August 13, 2026, leaving a narrow window for qualified subcontractors to submit proposals. While no set-aside designation or point of contact information is specified, the location of performance and governing standards indicate this is a specialized procurement targeting experienced contractors with verified capability in high-tolerance machining of aerospace-grade materials. The contract emphasizes technical precision, compliance verification, and supply chain reliability, with all submissions expected to demonstrate proven experience with similar aerospace components and adherence to government-mandated material and surface treatment protocols.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Domestic and Export-Controlled Logistics SupportThe contract requires comprehensive logistics management for sea transport using U.S.-flag vessels in strict accordance with MARAD regulations, ensuring compliance with domestic shipping mandates. It includes the processing of waivers and the preparation of all necessary export control documentation to meet ITAR and EAR requirements, emphasizing rigorous adherence to federal security and regulatory standards for controlled goods. The work is to be performed at Robins Air Force Base, Georgia, with a response deadline of August 13, 2026, and is structured as a subcontract under NAICS code 488510, falling under the Department of Defense’s ASC Supplier Oper AE and AF Division. All activities must support the secure and lawful movement of regulated materials via maritime channels, with full responsibility for documentation accuracy, regulatory compliance, and operational coordination.

Freight Transportation Arrangement

POSTED

DEADLINE

Cybersecurity Compliance & NIST SP 800-171 AssessmentThe contract requires the implementation and assessment of NIST SP 800-171 security controls to ensure the protection of covered defense information, with a focus on achieving full compliance across all applicable requirements. This includes executing necessary technical and administrative safeguards, documenting control implementation, and maintaining ongoing readiness for assessment. The contractor must also support annual Department of Defense assessments and submit accurate Supplier Performance Risk System (SPRS) reporting to demonstrate compliance status, ensuring transparency and alignment with DOD cybersecurity expectations. Performance is required at Robins Air Force Base, Georgia with a delivery date of March 31 2027. The contract is structured as a subcontract and falls under NAICS code 541512 for computer systems design services. Respondents must submit proposals by August 13 2026 to meet the deadline set by the Department of Defense’s ASC Supplier Operations AE and AF Division. Full compliance with NIST controls, accurate SPRS updates, and successful annual assessment outcomes are critical to contract fulfillment and continued eligibility for defense-related work.

Computer Systems Design Services

POSTED

DEADLINE

Manufacture of Panel Retainer StrapsThe contract calls for the fabrication and delivery of 130 units of STRAP, RETAINER, PANEL with the National Stock Number 1680010537707, requiring strict adherence to military specifications and a zero defect tolerance standard. All items must be packaged in accordance with MIL-STD-129, ensuring uniformity, traceability, and readiness for military logistics and deployment. The work is to be performed as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, with the place of performance designated at Robins Air Force Base, Georgia, 31098-1887. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, indicating a tight turnaround with high compliance expectations. The NAICS code 332722 identifies the industrial classification as Machine Shop; Turned Product; and Screw, Nut, and Bolt Manufacturing, signaling the precision manufacturing nature of the work required.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance and Data SafeguardingThis contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard covered defense information, ensuring compliance with federal cybersecurity standards. Key responsibilities include enforcing access control measures, establishing robust incident reporting protocols, and ensuring that all subcontractors are contractually bound to adhere to the same security requirements through proper flow-down clauses. The scope is focused on protecting sensitive data throughout the supply chain, with continuous monitoring and documentation to validate adherence to the framework. The contract is issued as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, and is tied to the NAICS code 541512, indicating information technology services. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026. Performance location and point of contact details are unspecified, but compliance with NIST controls is mandatory regardless of where the work is executed. The contractual obligations extend beyond initial implementation to include sustained operational security, making ongoing assessment and adaptation to evolving threats a core requirement.

Computer Systems Design Services

POSTED

DEADLINE

Packaging and Labeling of Defense ComponentsThe contract requires the military-compliant packaging and labeling of defense components adhering to DLA RP001 and MIL-STD-129 standards, ensuring all items are properly preserved in a clean and dry condition to maintain integrity during storage and transport. Each package must include accurate barcoding and labeling based on National Stock Numbers to enable seamless tracking and inventory management within the Department of Defense supply chain. The work involves precise application of labeling systems and packaging techniques that meet rigorous military specifications for durability, identification, and compatibility with automated logistics systems. This is a subcontract opportunity under NAICS code 493190, issued by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with a response deadline of August 13, 2026. The solicitation is posted on the DIBBS platform and requires full compliance with federal and military packaging regulations. While the place of performance and point of contact details are not specified, contractors must be prepared to meet all technical and procedural requirements outlined in the referenced standards without deviation. The contract emphasizes strict adherence to protocol, quality control, and documentation to support defense logistics operations.

Other Warehousing and Storage

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract seeks independent inspection and verification services for bellcrank components to ensure full compliance with MIL-STD-1916 and zero-defect standards, requiring rigorous attribute sampling across critical, major, and minor characteristics. The work is intended to validate that all delivered parts meet stringent military quality requirements through objective, third-party assessment, with failure to conform unacceptable at any level. The scope emphasizes defect prevention and adherence to established military specifications, making quality control and accurate documentation central to performance expectations. This subcontract, classified under NAICS code 541330, is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 13, 2026, and a posting date of August 5, 2026. There is no specified place of performance or set-aside classification, and the point of contact information is not provided. Interested parties must review the full solicitation via the provided DIBBS link to understand submission requirements, delivery expectations, and any additional technical or administrative conditions tied to performance.

Engineering Services

POSTED

DEADLINE

Precision Machining of Bellcrank Link ComponentThe contract calls for the manufacture of four precision bellcrank link components adhering to rigorous military specifications, encompassing complete CNC machining, heat treatment processes, and final inspection to ensure strict compliance with dimensional tolerances and material requirements. Each component must meet exacting performance and durability standards consistent with defense procurement protocols, ensuring reliability in critical mechanical applications. The work is classified as a subcontract under NAICS code 332721 and is being managed by the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense. Bidders must submit responses by August 13, 2026, with the opportunity posted on August 5, 2026, and performance is expected to occur under the oversight of the contracting agency without a specified geographic place of performance.

Precision Turned Product Manufacturing

POSTED

DEADLINE