This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Hazardous Materials Compliance & Safety Data Sheet (SDS) Support

Closed

Federal

Submission Closed07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541690

New

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # C2305

The Elsinore Valley Municipal Water District (EVMWD) is soliciting proposals for the Corydon Well Replacement Project, which involves the professional design, bidding support, and engineering services required to replace and abandon the existing Corydon well in Wildomar, California. The project is divided into two primary phases: Phase 1 focuses on civil site design, technical specifications, and construction management for the drilling of the new well and abandonment of the old one; Phase 2 covers the architectural, civil, mechanical, structural, electrical, and instrumentation design for equipping, testing, and commissioning the new groundwater production well. The project is funded through District funds and a Department of the Interior Bureau of Reclamation WaterSMART Planning and Project Design Grant, necessitating compliance with federal requirements, including the Build America Act, Buy America Preference, and the use of the Automated Standard Application for Payments (ASAP) system. TKE Engineering, Inc. is seeking qualified DBE, MBE, and WBE firms specializing in hydrology/hydraulic consulting, structural and electrical engineering, geotechnical investigation, and utility potholing. Proposals are due by 10:00 a.m. on September 1, 2026, via the PlanetBids Vendor Portal. Selection is based on demonstrated competence and professional qualifications, with evaluation weighted toward relevant experience (25%), project approach (25%), and scope/schedule (20%), while cost and innovation each account for 10%. The total estimated project cost is 2,260,788 dollars, though the final contract will be a negotiated not-to-exceed dollar limit. Awardees must adhere to strict federal and state regulations, including whistleblower protections, drug-free workplace standards, and specific insurance and bonding requirements for contracts exceeding the simplified acquisition threshold.

TKE Engineering, Inc.

POSTED

DEADLINE

PREA Audit - Juvenile Services

Solicitation # I20260275

Tarrant County is seeking quotes for PREA audit services for its Juvenile Services Department under solicitation number I20260275. Eligible vendors must hold a current and valid PREA Auditor certification issued by the Department of Justice. The response deadline for this opportunity is September 2, 2026. All submitted quotes must be fully inclusive of all costs, as additional charges after the award will not be accepted. Vendors must agree to use a purchase order as the payment method and accept an unconditional 30-day cancellation clause available to both parties. Bidders who require additional legal agreements or terms outside of the procurement documents may be disqualified.

POSTED

DEADLINE

Consultant for Renewable Energy Code Development and Land Use Study

Solicitation # 26-10867

Spokane County in Washington is seeking a professional consultant to provide technical assistance in developing a renewable energy development code specifically for commercial wind and solar energy facilities. This solicitation, identified as number 26-10867, involves a land use study and the crafting of regulatory frameworks to manage renewable energy projects within the county. Interested parties must submit their responses by the deadline of September 18, 2026. The primary point of contact for this procurement is Brenda McClarty, and the project will be performed within the state of Washington.

POSTED

DEADLINE

City of Lethbridge - Request for Proposal - Actuarial Review of the Insurance Reserve & Risk Financing Strategy

Solicitation # AB-2026-05964

The City of Lethbridge is seeking an actuarial consultant under solicitation AB-2026-05964 to conduct a comprehensive review of its corporate insurance program and insurance reserve. The primary objective of this engagement is to evaluate the adequacy of current reserves and identify risk financing options that will enhance the city's overall financial stewardship. Interested parties must submit their responses by the deadline of September 23, 2026. The project will be performed in Lethbridge, Alberta, and inquiries regarding this request for proposal should be directed to the Corporate Buyer, Ibukun Awolala.

POSTED

DEADLINE

Track Allocation Assessment Services

Solicitation # 2098987

Dallas Area Rapid Transit is soliciting offers for Track Allocation Assessment Services under solicitation number 2098987. The procurement process follows a two-step invitation for bids. In the first step, qualified firms or individuals must submit unpriced technical proposals to be evaluated against the minimum requirements. Bidders will be categorized as acceptable, potentially acceptable, or unacceptable, with only those deemed acceptable moving forward to the second step. Upon completion of the technical evaluation, the Authority will invite acceptable bidders to submit sealed priced bids, which will then be opened publicly. The final contract will be awarded based on the technical proposal and priced bid. The response deadline for this opportunity is September 25, 2026, and the primary point of contact is Ricardo Medina.

Dallas Area Rapid Transit

POSTED

DEADLINE

Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe Department of Defense, through the Strategic Acq Program Directorate, is seeking a subcontractor for hazardous materials compliance and Safety Data Sheet management. The primary objective of this engagement is to provide regulatory support to ensure all hazardous materials meet OSHA and federal standards, specifically through the professional preparation and submission of required Safety Data Sheets. This opportunity falls under NAICS code 541690 and was posted on August 26, 2026. Interested parties must submit their responses by the deadline of September 10, 2026. Further details and application procedures can be accessed via the DIBBS portal.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Hazardous Materials Labeling and ComplianceThe Defense Logistics Agency under the Department of Defense is seeking a subcontractor for the Hazardous Materials Labeling and Compliance project. The primary objective of this contract is to ensure that unit containers containing hazardous materials are labeled in strict accordance with OSHA’s Hazard Communication Standard, specifically 29 CFR 1910.1200. This opportunity falls under NAICS code 541690 and was posted on August 26, 2026. Interested parties must submit their responses by the deadline of September 8, 2026. Further details and application procedures are available through the DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

Export-Controlled Technical Data Handling and CertificationThe Department of Defense Fluid Handling Division is seeking a subcontractor to provide export control compliance services for the handling of technical data controlled under ITAR and EAR regulations. The scope of work includes the certification of personnel and the development and implementation of internal compliance programs to ensure all regulatory requirements are met. This opportunity is categorized under NAICS code 541690 and will be performed in Tracy, California. Interested parties must submit their responses by September 8, 2026, following the posting date of August 26, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazardous Materials Handling and LabelingThe Hazardous Materials Handling and Labeling subcontract is issued by the Department of Defense under the Maritime Supply Chain agency. The primary objective of this contract is to ensure full compliance with OSHA Hazard Communication Standards regarding the management of hazardous materials, specifically focusing on the preparation of Safety Data Sheets and proper labeling protocols. The project is based in Tracy, California, and falls under NAICS code 541690. Interested parties must submit their responses by September 8, 2026, following the posting date of August 26, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Packaging, Labeling, and Hazard Communication ComplianceThis subcontract, titled Packaging, Labeling, and Hazard Communication Compliance, is issued by the Department of Defense under the Maritime Supply Chain agency. The primary objective is to ensure that the delivered test adapter meets all necessary packaging, labeling, and hazard documentation standards, specifically adhering to OSHA and DLA requirements. This includes the provision of Material Safety Data Sheets and appropriate hazard warning labels. The performance of this contract will take place in Texarkana, Texas. Interested parties must submit their responses by the deadline of September 8, 2026. The project falls under NAICS code 541690 and was officially posted on August 26, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Compliance and Regulatory Support (Material Safety & Data)This subcontract, titled Compliance and Regulatory Support (Material Safety & Data), involves the preparation and submission of Material Safety Data Sheets and hazard warning labels for hardware or packaging materials. The primary objective is to ensure all materials are in full compliance with FAR 52.223-3 regulations. The project is managed by the Department of Defense under the agency Construction & Equipment Manu & Con, with the place of performance located in Anniston, Alabama. Interested parties must submit their responses by September 1, 2026, following the posting date of August 26, 2026. The work falls under NAICS code 541690.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Hazardous Materials Compliance and SDS PreparationThe Defense Logistics Agency under the Department of Defense is seeking a subcontractor for the preparation and submission of Safety Data Sheets for polyurethane coating. This project requires strict adherence to OSHA 29 CFR 1910.1200 and Federal Standard No. 313-E to ensure full hazardous materials compliance. The performance of this contract will take place in Yuma, Arizona. Interested parties must submit their responses by August 28, 2026, in accordance with the solicitation guidelines associated with NAICS code 541690.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

in 1 day

AI Contract Overview

The contract titled Hazardous Materials Compliance & Safety Data Sheet (SDS) Support requires the preparation and submission of Safety Data Sheets and hazardous material labeling that fully comply with OSHA’s 29 CFR 1910.1200, Federal Standard No. 313, and MIL-STD-129. The work involves ensuring all documentation and labeling meet federal and military standards for hazard communication, including accurate classification of chemicals, proper formatting of SDS documents, and adherence to standardized labeling requirements for transport and storage. Performance is expected to be carried out at New Cumberland, Pennsylvania, with a strong emphasis on regulatory precision and documentation integrity to support DoD supply chain safety protocols. This is a total small business set-aside subcontract under NAICS code 541690, indicating it is reserved exclusively for small businesses as defined by the Small Business Administration. The solicitation was posted on July 16, 2026, with responses due by July 24, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The contract is accessible through the DIBBS platform and requires proposers to have demonstrated expertise in hazardous materials compliance, SDS authoring, and military labeling standards. Successful bidders must be prepared to deliver accurate, timely, and fully compliant outputs to meet the logistical and safety needs of federal operations without delay.

General Info

Small business subcontract for OSHA- and MIL-STD-compliant SDS and hazardous material labeling in New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A6-26-T-07DA.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, SPECIAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 16

subcontract

Response DeadlineJul 24

Deadline has passed

Submission Closed

07/24/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Preparation and submission of OSHA-compliant Safety Data Sheets (SDS) and hazardous material labeling in accordance with 29 CFR 1910.1200, Federal Standard No. 313, and MIL-STD-129.