Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance & SDS Management

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires full compliance with OSHA 29 CFR 1910.1200 and MIL-STD-129 for the management of hazardous materials, focusing on the accurate preparation of Safety Data Sheets and proper hazard labeling in accordance with federal and military standards. All documentation and labeling must meet strict regulatory requirements to ensure safe handling, storage, and transportation of hazardous substances within Department of Defense operations. The scope includes end-to-end SDS management and adherence to standardized labeling protocols as mandated by MIL-STD-129, ensuring consistency and clarity across all affected materials and logistical pipelines. This is a subcontract under NAICS code 541690, issued by the Department of Defense through the Construction & Equipment Manu & Con organization, with a response deadline of August 10, 2026. Proposals must be submitted via the specified DIBBS portal before the deadline, with no set-aside designation indicated. Performance location details are not specified, implying potential nationwide or multi-site execution. Compliance is non-negotiable, and failure to meet OSHA or MIL-STD-129 requirements could result in disqualification or contract termination. The contract emphasizes precision in documentation, regulatory alignment, and operational readiness to support defense logistics and safety protocols.

General Info

Comply with OSHA 1910.1200 and MIL-STD-129 for SDS and hazard labeling in DoD operations by August 10, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure compliance with OSHA 29 CFR 1910.1200 and MIL-STD-129 for hazardous materials, including SDS preparation and hazard labeling.

Similar Contracts

Same NAICS industry code

Construction Safety Services IDIQThe Port of Seattle has established a Construction Safety Services IDIQ contract to proactively manage safety across its construction projects, addressing heightened legal responsibilities and increased site activity. This program is designed to ensure that construction operations proceed without disrupting Port functions while maintaining the highest standards of worker and public safety, responding to evolving court rulings that impose stricter obligations on owners to guarantee safe practices. The initiative reflects a commitment to preventive oversight, continuous improvement, and liability mitigation in a high-risk operational environment. The contract, classified under NAICS code 541690, is forecasted for issuance with primary point of contact Sue Yi and project manager Bruce Gamble available for coordination. It will support the Port’s Construction Management division in securing qualified service providers who can deliver comprehensive safety planning, monitoring, training, and compliance services across all construction sites within the Port’s jurisdiction. While specific scope details are not yet finalized, the IDIQ structure allows for multiple awards and flexible task orders to accommodate varying project needs, ensuring consistent safety protocols are applied regardless of project scale or location.

Construction Management

POSTED

DEADLINE

Accessibility Compliance & Testing SupportThe contract requires comprehensive accessibility audits and testing of Newsela’s digital platform to ensure full compliance with ADA, WCAG 2.1 AA, and Section 508 standards, with special attention to the needs of deaf and blind users. The work involves evaluating the platform’s usability, functionality, and adherence to accessibility guidelines through expert testing methodologies to identify and document barriers, followed by recommendations for remediation. The goal is to make the platform inclusive and fully accessible to individuals with sensory disabilities, supporting equitable access to educational content. This is a subcontract under the Florida School for the Deaf and the Blind, with a NAICS code of 541690 indicating other scientific and technical consulting services. The solicitation was posted on July 29, 2026, and responses are due by August 3, 2026. The place of performance and agency office details are not specified, and no set-aside type is indicated. All proposed work must be submitted through the Florida government procurement portal, and contractors are expected to demonstrate proven experience in digital accessibility auditing for educational technology platforms.

Florida School for the Deaf and the Blind

POSTED

DEADLINE

Hazardous Materials Compliance and Safety Data ManagementThe contract pertains to the management and submission of Material Safety Data Sheets and the proper labeling of hazardous materials to ensure compliance with state regulations. The work involves maintaining accurate and up-to-date documentation for all hazardous substances used or stored at the designated location in Lowell, Massachusetts, with a focus on meeting legal and safety standards. The contractor is responsible for monitoring regulatory changes, ensuring all materials are correctly labeled, and promptly submitting required MSDS documentation to relevant state authorities as mandated. This is a subcontract opportunity under NAICS code 541690, with a response deadline of August 28, 2026, at 4:00 PM. The contract is managed by the Massachusetts agency under Finance & Procurement, and performance is required at the Moody Street location in Lowell with ZIP code 01854. All activities must align with state-specific hazardous materials handling requirements, and the contractor must demonstrate expertise in regulatory compliance, documentation systems, and safety protocols to meet the terms of the agreement.

COCC1 - Finance & Procurement

POSTED

DEADLINE

Electrical Permitting & Inspection CoordinationThe contract requires the obtaining of local electrical permits and the coordination of final inspections for installed emergency power systems, ensuring full compliance with municipal and state regulations. The work involves acting as the primary liaison between the installation team and local authorities to secure necessary approvals and schedule inspection appointments, with the goal of facilitating timely and successful handover of the emergency power infrastructure. This subcontract is issued under NAICS code 541690 and is open for response until September 3, 2026, with the performance location tied to Mississippi, though specific city or zip details are not provided. The contracting entity is the Mississippi Department of Military Affairs, and all activities must align with state and local electrical codes to meet safety and operational standards for emergency systems.

MS DEPT of MILITARY

POSTED

DEADLINE

in about 1 month

Compliance and Audit Support ServicesThe contract seeks providers to deliver comprehensive compliance and audit support services focused on ensuring adherence to federal and state civil rights regulations and program integrity standards. This includes assisting with internal audits, preparing for regulatory reviews, and maintaining documentation and protocols to meet evolving compliance requirements under the oversight of the Health and Human Services Commission in Texas. The scope is designed to strengthen organizational readiness for inspections and audits by identifying gaps, implementing corrective actions, and ensuring alignment with applicable laws and policies. This is a subcontract opportunity with a NAICS code of 541690, indicating it falls under other scientific and technical consulting services. The solicitation was posted on July 29, 2026, with responses due by August 20, 2026. While specific performance location details are not provided, the work is intended to support state-level operations under the Texas Health and Human Services Commission. There is no set-aside designation specified, and the contract does not list a point of contact, requiring interested parties to access the full solicitation through the provided Texas SmartBuy portal link to obtain additional submission guidance.

Health and Human Services Commission

POSTED

DEADLINE

Hazard Communication & Labeling ComplianceThe contract requires full compliance with OSHA’s Hazard Communication Standard through the accurate preparation of hazard labels and Safety Data Sheets for all hazardous materials used in manufacturing or packaging operations. The work must ensure that workers and handlers receive clear, standardized information regarding chemical risks, proper handling procedures, and emergency measures. All documentation must align with current regulatory requirements and be tailored to the specific substances involved in the facility’s processes. The contract is issued under the NAICS code 541690 as a subcontract by the Nuclear Reactor Program within the Department of Defense, with performance location at FPO, ZIP 09523. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. There is no set-aside designation specified, and the contract is open to eligible subcontractors capable of meeting federal hazard communication standards. The absence of a designated point of contact suggests that all inquiries should be directed through the official DIBBS portal linked in the solicitation.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires identification of hazardous components within pharmaceutical products and the preparation of Safety Data Sheets (SDS) that comply with OSHA’s Hazard Communication Standard and Federal Standard No. 313 to ensure regulatory alignment. All SDS documentation must meet precise technical and formatting requirements to support safe handling, storage, and disposal of hazardous pharmaceutical materials used within the Department of Defense supply chain. The work is scoped under subcontract and centered on ensuring compliance with federal safety regulations for materials processed or distributed through the Medical Supply Chain Pharm FSA. Performance is required at Fort Bliss, Texas, with a response deadline of August 4, 2026, and the contract falls under NAICS code 541690 for other scientific and technical consulting services. This effort supports the Department of Defense’s obligation to maintain safety and regulatory integrity across its pharmaceutical supply chain, emphasizing precision in hazard identification and standardized reporting. All deliverables must be accurate, timely, and fully aligned with current federal guidelines to facilitate seamless operations and regulatory audits.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data SupportThe contract titled Hazardous Materials Compliance & Safety Data Support requires the provision and ongoing maintenance of Material Safety Data Sheets and ensures all hazardous material labeling adheres strictly to OSHA and DLA standards. This subcontract is specifically set aside for Women-Owned Small Businesses and is classified under NAICS code 541690, which covers other scientific and technical consulting services. The work must be performed at Tinker Air Force Base with a zip code of 73145-8000, and proposals must be submitted by August 10, 2026, following a posting date of July 29, 2026. The contract is managed by the Department of Defense under the organization name Construction & Equipment Manu & Con and will be accessed via the DIBBS platform. Compliance with federal safety regulations and accurate documentation of hazardous substances are central to fulfilling this requirement.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Hazardous and Radioactive Materials Compliance & LabelingThis contract requires strict adherence to MIL-STD-129 and OSHA standards for the proper labeling and hazard communication of shipments containing hazardous or radioactive materials. All labeling must accurately reflect material classifications, warning symbols, handling instructions, and emergency response information to ensure compliance with military and federal safety regulations. The work is scoped for subcontract performance under the Department of Defense's Electrical Devices Division, with performance designated at FPO, zip code 09523. The solicitation closed on August 10, 2026, with a posting date of July 29, 2026, and falls under NAICS code 541690 for other scientific and technical consulting services. Compliance with documentation, marking, and packaging protocols is mandatory to meet DoD transportation and safety requirements for sensitive cargo.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract titled Hazardous Materials Compliance and Labeling requires the identification, labeling, and documentation of hazardous materials within packaging, ensuring full adherence to regulatory standards. This includes the preparation of Safety Data Sheets and the implementation of procedures that meet federal and international transport and handling regulations. All work must be performed in alignment with established compliance frameworks to ensure the safe management and communication of chemical hazards throughout the supply chain. This is a small business set-aside subcontract under the NAICS code 541690, awarded by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation was posted on July 29, 2026, with a response deadline of August 13, 2026. The contract is intended exclusively for total small business concerns as defined by the SBA, and performance is expected to support defense logistics needs without specific geographic constraints. All deliverables must be completed to meet stringent Department of Defense compliance requirements for hazardous material handling and documentation.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires comprehensive management of hazardous materials including identification, preparation of safety data sheets, and strict adherence to OSHA and DFARS regulations for all shipments. The work demands thorough understanding of federal safety and defense supply chain standards to ensure materials are properly classified, documented, and transported in full compliance with applicable laws. All activities must align with the Department of Defense’s maritime supply chain requirements as managed by the MARITIME SUPPLY CHAIN ESOC BUYS division, with performance expected to meet rigorous federal procurement standards. The solicitation is classified as a subcontract under NAICS code 541690, indicating a focus on other scientific and technical consulting services related to environmental and safety compliance. Respondents must submit their proposals by August 10, 2026, with no set-aside provisions specified. The contract does not designate a specific place of performance or point of contact, suggesting the work may be performed remotely or across multiple locations as needed to support defense logistics. All documentation and compliance measures must be maintained to support audit readiness and regulatory inspection by federal authorities.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA Hazard Communication standards and DFARS 252.223-7001 for the handling and management of hazardous materials, with specific obligations to generate accurate Safety Data Sheets and apply proper hazard labeling in accordance with regulatory requirements. All activities must align with federal mandates for chemical safety communication, ensuring that personnel and downstream users receive consistent, standardized hazard information. The work is to be performed at a designated location in Dickson, Tennessee, with a zip code of 37055-0248, and is classified under NAICS code 541690 for other scientific and technical consulting services. This is a subcontract opportunity posted by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MANU & CON, with a response deadline of August 10, 2026. No set-aside type is specified, and the solicitation number is SPE8EF26T1526. The contractor must be prepared to meet all documentation, labeling, and procedural requirements tied to hazardous material handling as defined by both occupational safety and defense acquisition regulations. Compliance is mandatory and will be subject to verification throughout the performance period.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

Women-Owned Small Business (WOSB) Prime Subcontracting OpportunityA Women-Owned Small Business (WOSB)-certified firm is invited to serve as either a prime contractor or subcontractor to fulfill the full scope of work under a WOSB set-aside provision, ensuring preferential treatment for eligible women-owned businesses. The opportunity is categorized under NAICS code 314994, relating to other textile product mills, and is managed by the Department of Defense through its Construction & Equipment Manu & Con agency. Performance of the contract is required at Tinker AFB, with a zip code of 73145-8000. The solicitation was posted on July 29, 2026, and all responses must be submitted no later than August 10, 2026. This is classified as a subcontracting opportunity, meaning the winning entity will either lead the project as prime or support another prime under the WOSB set-aside framework. Participation is restricted to firms holding valid WOSB certification to comply with federal contracting rules aimed at promoting economic opportunity for women-owned small businesses.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

DEADLINE

Packaging, Palletization, and Labeling ServicesThe contract requires comprehensive packaging, palletization, and labeling services in full compliance with Department of Defense standards, specifically adhering to DLA requirements, RP001 for palletization, and MIL-STD-129 for labeling, including accurate hazardous material markings and ensuring all shipments are fully prepared for immediate transport. The work must be executed to guarantee readiness for military logistics operations, with strict attention to regulatory compliance and operational safety. This subcontract is designated as a Women-Owned Small Business Set-Aside under NAICS code 561910, reserved exclusively for eligible WOSB entities, and is issued by the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON. Performance is required at Tinker Air Force Base, Oklahoma, with a response deadline of August 10, 2026, and the solicitation was posted on July 29, 2026. All proposals must meet the technical and regulatory specifications outlined to be considered for award.

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Lacing and Tying Tape (NSN 4020-01-659-5502)The contract calls for the manufacture or supply of lacing and tying tape in accordance with military specifications and the DLA Master List, specifically under NSN 4020-01-659-5502. All materials must meet stringent quality and material safety standards required by defense procurement protocols, ensuring durability, performance, and compliance in military applications. The requirement is set aside exclusively for Women-Owned Small Businesses, with the NAICS code 314994 indicating classification under Other Miscellaneous Textile Product Mills. The place of performance is designated as Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, and all deliverables must be fulfilled to support defense logistics operations originating from this location. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026, with the procurement structured as a subcontract under the Department of Defense’s Construction & Equipment Manu & Con organization.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)The contract requires written notification and comprehensive compliance documentation for any item containing radioactive materials that exceed the thresholds outlined in 10 CFR 71.3. This obligation applies to all deliverables under the subcontract and demands strict adherence to federal regulations governing the handling, labeling, and reporting of radioactive substances. The contractor must ensure that all relevant technical and regulatory information is meticulously documented and submitted timely to demonstrate full alignment with safety and compliance standards. The solicitation is classified under NAICS code 541620 and is issued by the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON. Performance is required at the location in Dickson, Tennessee, with a zip code of 37055-0248. The response deadline is August 10, 2026, and the opportunity was posted on July 29, 2026. While no set-aside designation or point of contact is specified, interested parties must respond through the provided DIBBS portal before the deadline to be considered for award.

Environmental Consulting Services

POSTED

DEADLINE

DLA-Compliant Packaging and PalletizationThe contract requires full compliance with U.S. Department of Defense packaging standards for cargo tie-downs, including adherence to MIL-STD-129, ASTM D3951, and RP001 guidelines for packaging, preservation, and palletization. All items must be securely packaged to prevent damage during transit, properly preserved against environmental degradation, and palletized to ensure stability and ease of handling. Each shipment must include accurate barcode labeling for automated tracking and full traceability throughout the supply chain, ensuring end-to-end visibility from manufacturer to end user. The work is to be performed at a designated location in Dickson, Tennessee, with a zip code of 37055-0248. This solicitation is classified as a subcontract under NAICS code 484220, indicating involvement in truck transportation and related logistics services. The opportunity was posted on July 29, 2026, and proposals must be submitted by August 10, 2026. The contracting authority is the Department of Defense under the organization name Construction & Equipment Manu & Con. While no specific set-aside designation is provided, the contract is open to qualified subcontractors capable of meeting stringent military packaging and tracking requirements. Interested parties must access the full solicitation details via the DIBBS portal using the provided link.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Cargo Tie-Down Device ManufacturingThe contract requires the manufacture of ten military-spec cargo tie-down devices identified by NSN 3990-01-412-1518 and Part No. 3100207G019-008, fabricated to meet Defense Logistics Agency standards. Production must adhere to strict military specifications ensuring durability, reliability, and compatibility with existing DoD logistics and transport systems. The work is classified as a subcontract under NAICS code 332999, indicating it falls under other fabricated metal product manufacturing, and is intended for performance at DICKSON, Tennessee with ZIP code 37055-0248. Bids must be submitted by August 10, 2026, with the opportunity posted on July 29, 2026, giving potential vendors approximately three weeks to prepare proposals. The contract is issued under the Department of Defense through the organization Construction & Equipment Manu & Con, with no set-aside designation specified, meaning it is open to all eligible contractors regardless of size or certification. The full solicitation details and submission portal are accessible via the DIBBS platform using the reference number SPE8EF26T1526.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Packaging, Palletization & Logistics Support

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling Services

Environmental Consulting Services

POSTED

DEADLINE

Supply of Hoisting Adapters (Commercial Off-the-Shelf Item)

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Domestic Transportation to DLA Distribution SiteThe contract requires the transportation of packaged fibrous rope from the origin point to the DLA Distribution Center in New Cumberland, Pennsylvania, under FOB Origin terms, meaning the buyer assumes responsibility for the cargo once it leaves the seller’s location. All transport activities must strictly adhere to DLA transportation protocols, ensuring compliance with federal logistics standards for handling, documentation, and delivery. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualified under SBA guidelines are eligible to bid, with the North American Industry Classification System code 484220 indicating a focus on truck transportation of general freight. The solicitation was posted on July 29, 2026, with responses due by August 5, 2026, and the delivery location is clearly identified with a zip code of 17070-5002, ensuring precise destination mapping for logistics planning. The contract falls under the Department of Defense’s Construction & Equipment Manu & Con agency, underscoring its alignment with military supply chain requirements.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE