Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance and SDS Management

Active

Federal

Response Deadline08/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires strict compliance with OSHA and DFARS regulations regarding the labeling of hazardous materials and the accurate submission of Safety Data Sheets, specifically governed by clause 252.223-7001. All hazardous substances handled under this agreement must be properly identified, marked, and documented to meet federal safety and reporting standards, ensuring personnel protection and regulatory alignment. The subcontractor is responsible for maintaining up-to-date SDS documentation and verifying that all labeling conforms to current OSHA HazCom guidelines while adhering to Department of Defense procurement requirements. This agreement is classified as a subcontract under NAICS code 541620 and is managed by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance centered at Cherry Point, North Carolina, zip code 28533-0021. The solicitation was posted on July 28, 2026, with a firm response deadline of August 5, 2026, indicating a tight window for qualification and proposal submission. The contract emphasizes rigorous adherence to safety protocols and documentation accuracy, making compliance non-negotiable for any entity seeking to fulfill the terms.

General Info

Subcontractor must comply with OSHA and DFARS for hazardous material labeling and SDS documentation at Cherry Point, NC.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

CHERRY POINT, NC, 28533-0021, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure hazardous material labeling and submission of Safety Data Sheets (SDS) per OSHA and DFARS requirements, particularly under clause 252.223-7001.

Similar Contracts

Same NAICS industry code

26RFP07272026K-DB Developer Services for 4330, 4334 & 4336 Fulton Industrial Circle BoulevardFulton County, Georgia is seeking a preferred developer to advance a project at 4330, 4334, and 4336 Fulton Industrial Circle Boulevard through a competitive solicitation process. Once selected, the developer will be expected to perform critical pre-development activities prior to executing the formal Development Agreement, including conducting environmental reviews, refining the project concept and financial model, negotiating terms with the County, securing necessary entitlements, and obtaining project funding. These responsibilities are intended to ensure readiness for site control transfer and full-scale development upon agreement execution. The solicitation, numbered PE-66096-NONST-2026-000000192, was posted on July 28, 2026, with responses due by September 2, 2026, and is managed by the Fulton County Purchasing Department. Darlene Banks, CAPA, serves as the primary point of contact for inquiries regarding the opportunity.

Fulton County Purchasing Department

POSTED

about 17 hours ago

DEADLINE

in about 1 month

AS27-5 Natural Capital ManagementThe State of Utah Division of Purchasing, in coordination with the Division of Wildlife Resources, is seeking a contractor to deliver professional services aimed at assessing, quantifying, enhancing, and monitoring wildlife habitats across state Wildlife Management Areas, while also facilitating the verification and transaction of natural capital assets. The selected vendor will play a critical role in translating ecological improvements into financial opportunities by promoting qualified natural capital assets to generate additional revenue streams that directly support ongoing management and enhancement activities on these areas. This contract requires a comprehensive understanding of ecological valuation, market mechanisms for natural capital, and the ability to align conservation outcomes with economic incentives. The contract term is initially set for ten years, with the possibility of two additional ten-year renewal periods, creating a potential 30-year engagement. Vendors must guarantee their pricing for the entire duration of the contract, ensuring cost stability and predictability for the state. The solicitation, titled AS27-5 Natural Capital Management, was posted on July 28, 2026, with proposals due by August 11, 2026. Award will be made to the most qualified and responsive vendor based on a scoring system compliant with state procurement code, and all work will be performed within the state of Utah. Ann Schliep serves as the primary point of contact for inquiries regarding this procurement.

POSTED

about 18 hours ago

DEADLINE

Environmental and Regulatory Compliance ConsultingThe City of Garland is seeking advisory services to ensure comprehensive compliance with federal and state environmental regulations, including CERCLA, RCRA, the Clean Water Act, the Clean Air Act, and the Texas Administrative Code. The subcontract requires expert consultation to assess, manage, and maintain adherence to these regulatory frameworks, with services tailored to support the city’s operational and environmental responsibilities. The work involves evaluating current practices, identifying potential violations, implementing corrective actions, and staying current with shifting regulatory requirements across multiple jurisdictions. Responses are due by August 11, 2026, and the solicitation is categorized under NAICS code 541620, which aligns with environmental consulting services. The contract is structured as a subcontract with no specific set-aside designation, indicating it is open to qualified vendors regardless of size or ownership type. The performance location is within Texas, specifically tied to the City of Garland’s operational needs, and the procurement is accessible through the city’s public bidding portal. The emphasis is on technical expertise in environmental law and regulatory compliance, with the expectation that the contractor will deliver actionable guidance to uphold environmental standards and mitigate legal or financial risk for the city.

City Of Garland

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract focuses on the identification, labeling, and documentation of hazardous materials used in manufacturing and packaging processes, requiring full compliance with safety and regulatory standards. Key responsibilities include authoring, maintaining, and submitting Safety Data Sheets (SDS) that accurately reflect the chemical composition, handling procedures, and potential risks associated with all hazardous substances involved in operations at the New Cumberland facility. The work must align with federal requirements for hazard communication and ensure that all documentation is current, accessible, and properly formatted in accordance with global harmonization standards. This is a subcontract opportunity issued by the Department of Defense through the DDSP New Cumberland Facility, with a place of performance located in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by July 31, 2026. The North American Industry Classification System code assigned is 541620, indicating the work falls under environmental consulting and related services. The contract emphasizes precise, timely, and compliant handling of hazardous materials information to support defense manufacturing and ensure worker and environmental safety.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Handling and DocumentationThis contract requires strict adherence to all regulatory standards for handling hazardous materials, including proper labeling, maintenance of up-to-date Safety Data Sheets, and full compliance with OSHA and DFARS requirements. The subcontract is tied to the Defense Logistics Agency under the Department of Defense and falls under NAICS code 541620, indicating it relates to scientific and technical consulting services involving hazardous material management. Performance is expected at a military post office location with ZIP code 96616, suggesting operations may support defense logistics in a deployed or overseas capacity. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and emphasizes documentation rigor to ensure safety and regulatory alignment across all stages of material handling.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets for all hazardous materials used or handled under the agreement, ensuring full compliance with FED-STD-313 and OSHA 29 CFR 1910.1200 regulations, except where specific statutory exemptions apply. The work involves accurate documentation, proper labeling, and adherence to federal standards governing the communication of chemical hazards to ensure workplace safety and regulatory alignment. All deliverables must meet strict formatting, content, and distribution requirements to support safe handling, storage, and transportation of hazardous substances. This subcontract is issued under NAICS code 541620 by the Department of Defense through the LAND SUPPLY CHAIN office, with performance designated at Fort Hood, Texas, ZIP 76544-0000. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. The contract falls under a general subcontracting category without a specific set-aside designation, and interested parties must access the official solicitation via the provided DIBBS link to review full terms and submission instructions. No point of contact is listed, and all inquiries must follow the official portal guidance.

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Safety Data Sheet (SDS) and Regulatory Compliance DocumentationThis contract requires the preparation of Safety Data Sheets (SDS) that comply with OSHA standards and Federal Standard No. 313, ensuring proper identification and hazard communication for all regulated hazardous materials. The work must also meet the Defense Federal Acquisition Regulation Supplement (DFARS) 252.223-7001 requirements, which enforce federal compliance for defense-related hazardous substance documentation. The solicitation is issued as a subcontract under NAICS code 541620, indicating services related to scientific and technical consulting, and is managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The place of performance is designated as FPO with a ZIP code of 34091, though specific physical location details are not provided. All proposals must be submitted by the deadline of August 10, 2026, with the solicitation posted on July 28, 2026, via the DIBBS platform for federal contracting opportunities.

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Labeling and Packaging ComplianceThe contract seeks a subcontractor to develop and approve hazard communication labels for hazardous materials in strict alignment with OSHA’s Hazard Communication Standard and Defense Logistics Agency requirements. The work involves designing, reviewing, and certifying labels that accurately convey chemical hazards, safety instructions, and regulatory compliance information, ensuring all materials meet federal safety and labeling mandates for military and defense supply chains. The project requires expertise in regulatory compliance, label design, and hazardous material handling protocols to support the Department of Defense’s logistics operations. The contract was posted on July 28, 2026, with a response deadline of August 10, 2026, and falls under NAICS code 541620 for management, scientific, and technical consulting services. It is issued by the Land Supply Chain under the Department of Defense, and performance is expected to support defense logistics activities without specified geographic limitations. The subcontract nature implies the successful bidder will likely operate under a prime contractor’s umbrella, focusing solely on label development and approval workflows critical to the safe handling, storage, and transport of hazardous materials within the defense supply chain.

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Sustainable & Environmentally Compliant Product SourcingAll procured products under this subcontract must comply with the EPA Comprehensive Procurement Guidelines and Department of Defense sustainability standards, requiring the use of EPEAT or Energy Star certified items to ensure environmental responsibility and energy efficiency. The contract is categorized under NAICS code 541620 and is issued by the Department of Defense through its Construction & Equipment T & IFO EQ office, with responses due by August 10, 2026. The solicitation is open for subcontracting opportunities without a specific set-aside designation, and performance is expected to align with federal sustainability mandates regardless of geographic location.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract requires the provision of comprehensive hazard communication support for packaging containing hazardous materials, specifically including the preparation of Material Safety Data Sheets and Safety Data Sheets in accordance with current regulatory standards, as well as the application of OSHA-compliant hazard warning labels. The work must ensure full alignment with federal safety regulations to protect personnel handling these materials and to maintain regulatory compliance across all stages of packaging and distribution. The performance location is designated as Tracy, California, with a ZIP code of 95304-5000, and all deliverables must meet the technical and procedural expectations set forth by the Department of Defense under the NAICS code 541620, which covers management, scientific, and technical consulting services. This agreement is structured as a subcontract with a response deadline of August 10, 2026, and was posted on July 28, 2026, indicating a relatively short procurement timeline. The contracting activity falls under the Land Supplier Operations Vehicle Support organization within the Department of Defense, suggesting the delivered services will support military logistics or equipment systems involving hazardous substances. While no set-aside provisions or point of contact details are specified, the emphasis on accurate documentation and labeling implies a high-stakes operational environment where compliance failures could result in safety risks or regulatory penalties. Contractors must be prepared to demonstrate expertise in global harmonized systems for chemical classification and labeling, as well as the ability to deliver timely, error-free SDS and label documentation under strict quality controls.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract requires the preparation and ongoing maintenance of Safety Data Sheets (SDS) for all hazardous materials supplied under its terms, ensuring full compliance with OSHA’s 29 CFR 1910.1200 and Department of Defense specifications. This includes accurate documentation of chemical hazards, handling procedures, emergency measures, and regulatory information to support safe usage, storage, and disposal across all DoD operations. The SDS must be current, legally valid, and aligned with global harmonization standards where applicable, with updates triggered by new chemical data, regulatory changes, or material substitutions. The subcontract is issued by the Defense Logistics Agency under NAICS code 541620, which pertains to environmental consulting services, and is tied to a performance location identified as FPO with ZIP code 96616. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, indicating a tight timeline for proposal submission. While no specific set-aside designation is included, the work is intended to support critical defense supply chain safety requirements, making timely and precise SDS development a core deliverable for contractor accountability and operational readiness.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance & SDS Documentation ProviderThe contract requires the preparation and submission of Hazardous Material Safety Data Sheets (SDS) in full accordance with OSHA’s Hazard Communication Standard and, where applicable, NAVSEA 5100-003D guidelines. The scope centers on ensuring accurate, up-to-date, and compliant documentation for hazardous materials used or handled within the designated performance location in Little Falls, Minnesota, with ZIP code 56345-4173. The work is classified as a subcontract under NAICS code 541620, indicating services in analytical laboratory services, and is managed by the Maritime Supply Chain ESOC Buys under the Department of Defense. All deliverables must meet federal regulatory requirements to support safety, transparency, and regulatory adherence in handling hazardous substances. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with no set-aside designation specified. While no point of contact is listed, interested parties must submit proposals through the DIBBS portal via the provided UI link. Compliance with both OSHA and NAVSEA standards is non-negotiable, and failure to meet these criteria will result in non-acceptance of submissions. The performance location is limited to the specified address, and the contractor must ensure all SDS documentation is current, accurately reflects material hazards, and is formatted and maintained in alignment with federal maritime and occupational safety protocols.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

Aerospace Skin Panel SupplyThe contract calls for the supply of two aerospace SKIN components, likely fuselage or wing panels, to meet stringent Department of Defense standards set by DLA Fleet Readiness Center DLA PSC. These components must comply with technical specifications, quality requirements, and specialized packaging and labeling protocols defined by DLA for defense applications. The effort is classified as a subcontract under NAICS code 336411, indicating it falls within the aircraft manufacturing sector. The place of performance is firmly designated as Cherry Point, North Carolina, with a zip code of 28533-0021, suggesting final integration or inspection will occur at a military aviation facility there. All proposals must be submitted by August 5, 2026, following a posting date of July 28, 2026, leaving a seven-day window for potential vendors to respond. The solicitation is accessible through the DIBBS platform, and while no point of contact is listed, compliance with DLA’s operational and logistical standards is mandatory for award consideration.

Aircraft Manufacturing

POSTED

about 21 hours ago

DEADLINE

Quality Inspection and Conformance TestingThe contract requires comprehensive in-process and final inspection of hose assemblies to ensure zero non-conformances on critical attributes, with inspection procedures governed by MIL-STD-1916 or ASQ Z1.4 sampling standards. The work is focused on maintaining the highest levels of quality control throughout manufacturing to prevent defects that could compromise safety or performance, particularly in mission-critical applications. The inspection process must be meticulous and fully compliant with military and industry standards to guarantee conformance at every stage of production. The contract is a subcontract under the Department of Defense, issued by the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, 28533-0021. It was posted on July 28, 2026, and responses are due by August 5, 2026, under NAICS code 541380, which pertains to other scientific and technical consulting services. The emphasis is on delivering inspection services that meet exacting defense standards, with no tolerance for non-conformances on critical characteristics, ensuring readiness and reliability for military use.

Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

Military Packaging and Labeling ServicesThe contract requires comprehensive packaging, hazard labeling, and military marking services for delivered hose assemblies in strict adherence to federal and defense standards, notably MIL-STD-129 for military marking and OSHA HAZCOM for hazard communication. All work must ensure compliance with operational and safety requirements for secure transportation, handling, and storage within military supply chains, with a focus on accuracy, durability, and regulatory alignment. The services are subcontracted under the Department of Defense’s DLA Fleet Readiness Center DLA PSC and are performance-based, with the place of performance specified as Cherry Point, North Carolina, zip code 28533-0021. The solicitation is open for responses until August 5, 2026, and falls under NAICS code 561990 for other support activities. Participation is limited to qualified subcontractors capable of meeting the rigorous documentation, labeling, and packaging protocols mandated for defense logistics.

All Other Support Services

POSTED

about 21 hours ago

DEADLINE

Hose Assembly Manufacturing and SupplyThe contract calls for the manufacture and supply of three critical-application hose assemblies with part number 70-061L180F273 and NSN 4720-LL-NCB-5971, all of which must meet exacting military specifications to ensure operational reliability in demanding environments. These assemblies are essential components for defense systems, and the supplier must adhere to stringent quality and performance standards without modification or deviation. The work is to be performed at Cherry Point, North Carolina, with the delivery scheduled to support readiness requirements tied to Department of Defense operations. This subcontract was posted on July 28, 2026, with a response deadline of August 5, 2026, indicating a tight turnaround for proposals. The North American Industry Classification System code 332994 categorizes the work under other fabricated metal product manufacturing, aligning with specialized industrial production of mission-critical components. The contract is managed by the DLA Fleet Readiness Center under the Department of Defense, underscoring its importance to military logistics and equipment sustainment. All submissions must be made via the DIBBS platform, and compliance with technical, contractual, and delivery requirements will be rigorously evaluated before award.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 21 hours ago

DEADLINE

Carbon Seal Supply and DeliveryThe contract calls for the supply and delivery of eight units of carbon seals with NSN 5330-LN-003-3627, intended for use in critical aerospace systems where zero-defect quality standards are mandatory. Each unit must meet stringent military compliance requirements, including packaging specifications designed to ensure integrity during transport and storage under demanding operational conditions. The item is classified under NAICS code 336411, indicating its alignment with aerospace component manufacturing, and is being procured as a subcontract under the Department of Defense. Performance of the contract is designated to occur at Cherry Point, North Carolina, with delivery expected to support immediate operational readiness at this military installation. The solicitation was posted on July 28, 2026, and responses must be submitted by August 5, 2026, with no set-aside provisions applied. All submissions must adhere to the DLA Fleet Readiness Center’s technical and compliance protocols to be considered.

Aircraft Manufacturing

POSTED

about 21 hours ago

DEADLINE

SKINThe contract issued by the Defense Logistics Agency Fleet Readiness Center for the item identified as SKIN with NSN 1560-LN-002-9428 and part number 65213-13011-142 specifies the procurement of two units at a total contract value of $2.00, with delivery required 53 days after award to Cherry Point, North Carolina under FOB Destination terms. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and must be packaged and labeled per MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization conforming strictly to those guidelines. Item identification must follow MIL-STD-130N(1), and quality assurance sampling methods are governed by MIL-STD-1916 or a comparable zero-based plan, requiring zero non-conformances unless otherwise specified. Inspection and acceptance occur at the delivery point, with the government retaining responsibility for both functions. The material has no shelf life, and preservation methods are not further defined. The contract is solicited under SPEFA5-26-T-0960 with a response deadline of August 5, 2026, and requires electronic submission through DIBBS. The contract incorporates a comprehensive set of regulatory and compliance clauses, including mandatory cybersecurity protections under 52.240-93 and 252.204-7012, requirements for safeguarding covered defense information and reporting cyber incidents, and compliance with hazardous materials labeling standards under 252.223-7001 and 52.223-3, necessitating submission of Safety Data Sheets and hazard labels unless exempted. Offerors must certify their entity status via UEI and CAGE code, comply with employment eligibility verification through E-Verify, and affirm adherence to anti-human trafficking provisions. Ocean transport, if applicable, must use U.S.-flag vessels unless waived. Contractual changes are permitted under fixed-price terms, and subcontractors providing commercial products must flow down applicable clauses. Payments are to be processed exclusively through WAWF using approved document types. The solicitation does not specify a contract type or evaluation factors beyond implied price-driven, lowest price technically acceptable award criteria. Failure to meet any referenced technical, quality, packaging, or regulatory requirement constitutes grounds for rejection

Other Support Activities for Air Transportation

POSTED

about 21 hours ago

DEADLINE

HOSE ASSEMBLYThis contract is for the procurement of a hose assembly with part number 70-061L180F273 and NSN 4720-LL-NCB-5971, in a quantity of three units, under solicitation SPEFA5-26-T-0958. The item is designated as a critical application item with no shelf life requirement and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Identification of the item and its packaging must follow MIL-STD-130N for military property marking and MIL-STD-129 for packaging and labeling. Packaging must conform to ASTM D3951 while adhering to DLA’s packaging requirements, including palletization per RP001, with unit of issue defined by the contract and quantity per unit pack set at 1. Sampling for quality verification must use MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Delivery is required within 11 days of contract award, with FOB destination delivery and inspection and acceptance occurring at the delivery point. The item must be shipped to the specified freight address at Cherry Point, North Carolina, with a parcel post address also provided for related correspondence. The original required delivery date is July 28, 2026, and the contract permits no variance in quantity—exactly three units must be delivered. The purchase request number is 7017659838, and the unit price is $3.00 per item, totaling $9.00. The contract references the DoD unit of issue system and provides the point of contact for inquiries, Larry Kemp, with associated phone and email details. All documents and requirements supersede any conflicting industry standards unless explicitly amended in the solicitation.

Other Support Activities for Air Transportation

POSTED

about 21 hours ago

DEADLINE

RIBThis contract issued by the DLA Fleet Readiness Center pertains to the procurement of two units of part number 449-034-219-151 with NSN 1560-LN-001-5270 under solicitation SPEFA5-26-T-0961, with a required delivery date of May 31, 2020, and a delivery lead time of 84 days FOB destination. The materials are subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, which override any conflicting standards. Packaging must comply with MIL-STD-129 for marking and labeling and ASTM D3951 for general packaging, with palletization governed by DLA’s specific packaging directives. Sampling and inspection follow zero-defect acceptance criteria under MIL-STD-1916 or ASQ H1331 unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No shelf life restriction applies to this item. The contract specifies a fixed quantity of two units with no tolerance for variance, and inspection and acceptance occur at the destination point. The item is to be delivered to the designated FLEET READINESS CENTER DLA addresses in Cherry Point, North Carolina, with parcel post and freight shipping details provided. The unit of issue is each (EA), and pricing is listed at $2.00 each, totaling $4.00. Documentation and compliance with DLA’s unit of issue and purchase unit standards are required, and all labeling and packaging must reflect the contract’s specified quantity per unit pack. The point of contact for inquiries is Curtis Harper, with contract details accessible via the DIBBS system, and the solicitation was posted July 28, 2026, with a response deadline of August 5, 2026.

Other Support Activities for Air Transportation

POSTED

about 21 hours ago

DEADLINE

SEAL, CARBONThe contract pertains to the procurement of a carbon seal item identified by NSN 5330-LN-003-3627 and part numbers 3017934 and 3059025-01, supplied by Pratt & Whitney Canada Corp, and classified as a critical application item with no shelf life requirement. A total quantity of 8 units is required, each to be delivered in individual units of issue, under solicitation SPEFA5-26-T-0959, with delivery due in 70 days FOB destination, and zero variance permitted in quantity. Inspection and acceptance are both to occur at the destination, with packaging strictly aligned to ASTM D3951, but superseded by applicable DLA Master List of Technical and Quality Requirements. All packaging and labeling must conform to MIL-STD-129, and palletization must adhere to DLA’s packaging requirements. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality as defined in associated technical documentation. The item is subject to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and all technical specifications referenced by R or I numbers are controlled by the latest revision of the DLA Master List in effect at the time of solicitation or award, as applicable. The unit of issue is EA, with a total contract value based on a per-unit price reflecting the specified quantity. Delivery must be completed by the original required date of July 28, 2026, with shipments directed to either the parcel post or freight shipping address in Cherry Point, North Carolina, as designated. The contract is managed by the DLA Fleet Readiness Center, with Larry Kemp as the primary point of contact, and all compliance must align with DoD authorized unit of issue standards and procurement protocols as outlined in applicable federal and military standards.

Other Support Activities for Air Transportation

POSTED

about 21 hours ago

DEADLINE

Logistics and Freight Coordination (FOB Destination)The contract requires the coordination and execution of freight delivery to DLA Cherry Point, North Carolina under FOB Destination terms, ensuring all shipments arrive on time within 30 days of the agreed delivery date and strictly comply with Department of Defense shipping standards. This subcontract under NAICS code 484220 is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC and demands full adherence to federal logistics protocols for military supply chains. All parties must meet rigorous compliance benchmarks for documentation, handling, and transit timelines to ensure mission-critical delivery success. Responses to this solicitation are due by August 4, 2026, with the opportunity posted on July 27, 2026. The place of performance is specifically tied to DLA Cherry Point, NC, with no flexibility in location or delivery method. The FOB Destination clause places full responsibility on the contractor for transit risks and costs until the cargo is formally received at the designated site. Compliance with DoD standards encompasses tracking, labeling, packaging, and reporting requirements to ensure inventory accuracy and operational readiness across the defense logistics network.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply Chain Traceability and Documentation SupportThe contract requires comprehensive end-to-end supply chain traceability for critical defense components, ensuring full visibility and documentation of parts from origin through final assembly. This includes managing superseded part numbers to prevent obsolescence risks and maintain accuracy in logistics and maintenance records. All activities must adhere strictly to DFARS and FAR regulatory standards, with rigorous documentation practices to validate compliance across the entire supply chain. The work is structured as a subcontract under the Department of Defense, specifically for the DLA Fleet Readiness Center, with a focus on sustaining the integrity and authenticity of defense-critical parts. The response deadline is August 4, 2026, after which submissions will no longer be accepted, and performance will be expected to meet federal defense procurement requirements without exception.

Other Management Consulting Services

POSTED

DEADLINE

Packaging, Labeling, and Palletization ServicesThe contract requires the provision of certified packaging, labeling, and palletization services fully aligned with MIL-STD-129, ASTM D3951, and DLA RP001 military and defense standards to ensure compliance with Department of Defense specifications. All services must meet stringent requirements for durability, identification, traceability, and handling of defense-related materials, with strict adherence to standardized procedures for labeling, barcoding, and pallet configuration. The work is classified as a subcontract under NAICS code 561910, and performance is expected to support the DLA Fleet Readiness Center under the Department of Defense. Proposals must be submitted by August 4, 2026, and the opportunity was posted on July 27, 2026, with no set-aside type specified. All work must be executed in accordance with federal defense logistics protocols and is tied to the DLA’s supply chain integrity initiatives.

Packaging and Labeling Services

POSTED

DEADLINE