Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance and SDS Management

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the identification of hazardous materials linked to the RAMP ANGLE system and the development of fully compliant Safety Data Sheets prior to contract award and throughout performance. This task demands precise material analysis and adherence to regulatory standards to ensure all hazardous substances are documented accurately in SDS format, supporting safety, compliance, and operational readiness. The work is critical to meeting federal requirements for handling and transporting hazardous materials within defense operations. This subcontract is issued under NAICS code 541690 by the Department of Defense’s DLA Fleet Readiness Center DLA PSC, with place of performance designated as Cherry Point, North Carolina, ZIP 28533-0021. The solicitation was posted on July 29, 2026, and responses are due by August 6, 2026. Although the specific set-aside details are not provided, the contract is structured as a subcontract under a larger defense logistics framework. The timely and accurate preparation of SDS documentation is non-negotiable, with ongoing compliance expectations during contract execution to maintain safety and regulatory integrity.

General Info

Identify hazardous materials and develop compliant SDS for RAMP ANGLE system at Cherry Point, NC, per DoD requirements.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

CHERRY POINT, NC, 28533-0021, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identification of hazardous materials associated with the RAMP ANGLE and preparation of compliant Safety Data Sheets (SDS) prior to award and during performance.

Similar Contracts

Same NAICS industry code

Construction Safety Services IDIQThe Port of Seattle has established a Construction Safety Services IDIQ contract to proactively manage safety across its construction projects, addressing heightened legal responsibilities and increased site activity. This program is designed to ensure that construction operations proceed without disrupting Port functions while maintaining the highest standards of worker and public safety, responding to evolving court rulings that impose stricter obligations on owners to guarantee safe practices. The initiative reflects a commitment to preventive oversight, continuous improvement, and liability mitigation in a high-risk operational environment. The contract, classified under NAICS code 541690, is forecasted for issuance with primary point of contact Sue Yi and project manager Bruce Gamble available for coordination. It will support the Port’s Construction Management division in securing qualified service providers who can deliver comprehensive safety planning, monitoring, training, and compliance services across all construction sites within the Port’s jurisdiction. While specific scope details are not yet finalized, the IDIQ structure allows for multiple awards and flexible task orders to accommodate varying project needs, ensuring consistent safety protocols are applied regardless of project scale or location.

Construction Management

POSTED

DEADLINE

Accessibility Compliance & Testing SupportThe contract requires comprehensive accessibility audits and testing of Newsela’s digital platform to ensure full compliance with ADA, WCAG 2.1 AA, and Section 508 standards, with special attention to the needs of deaf and blind users. The work involves evaluating the platform’s usability, functionality, and adherence to accessibility guidelines through expert testing methodologies to identify and document barriers, followed by recommendations for remediation. The goal is to make the platform inclusive and fully accessible to individuals with sensory disabilities, supporting equitable access to educational content. This is a subcontract under the Florida School for the Deaf and the Blind, with a NAICS code of 541690 indicating other scientific and technical consulting services. The solicitation was posted on July 29, 2026, and responses are due by August 3, 2026. The place of performance and agency office details are not specified, and no set-aside type is indicated. All proposed work must be submitted through the Florida government procurement portal, and contractors are expected to demonstrate proven experience in digital accessibility auditing for educational technology platforms.

Florida School for the Deaf and the Blind

POSTED

DEADLINE

Hazardous Materials Compliance and Safety Data ManagementThe contract pertains to the management and submission of Material Safety Data Sheets and the proper labeling of hazardous materials to ensure compliance with state regulations. The work involves maintaining accurate and up-to-date documentation for all hazardous substances used or stored at the designated location in Lowell, Massachusetts, with a focus on meeting legal and safety standards. The contractor is responsible for monitoring regulatory changes, ensuring all materials are correctly labeled, and promptly submitting required MSDS documentation to relevant state authorities as mandated. This is a subcontract opportunity under NAICS code 541690, with a response deadline of August 28, 2026, at 4:00 PM. The contract is managed by the Massachusetts agency under Finance & Procurement, and performance is required at the Moody Street location in Lowell with ZIP code 01854. All activities must align with state-specific hazardous materials handling requirements, and the contractor must demonstrate expertise in regulatory compliance, documentation systems, and safety protocols to meet the terms of the agreement.

COCC1 - Finance & Procurement

POSTED

DEADLINE

Electrical Permitting & Inspection CoordinationThe contract requires the obtaining of local electrical permits and the coordination of final inspections for installed emergency power systems, ensuring full compliance with municipal and state regulations. The work involves acting as the primary liaison between the installation team and local authorities to secure necessary approvals and schedule inspection appointments, with the goal of facilitating timely and successful handover of the emergency power infrastructure. This subcontract is issued under NAICS code 541690 and is open for response until September 3, 2026, with the performance location tied to Mississippi, though specific city or zip details are not provided. The contracting entity is the Mississippi Department of Military Affairs, and all activities must align with state and local electrical codes to meet safety and operational standards for emergency systems.

MS DEPT of MILITARY

POSTED

DEADLINE

in about 1 month

Compliance and Audit Support ServicesThe contract seeks providers to deliver comprehensive compliance and audit support services focused on ensuring adherence to federal and state civil rights regulations and program integrity standards. This includes assisting with internal audits, preparing for regulatory reviews, and maintaining documentation and protocols to meet evolving compliance requirements under the oversight of the Health and Human Services Commission in Texas. The scope is designed to strengthen organizational readiness for inspections and audits by identifying gaps, implementing corrective actions, and ensuring alignment with applicable laws and policies. This is a subcontract opportunity with a NAICS code of 541690, indicating it falls under other scientific and technical consulting services. The solicitation was posted on July 29, 2026, with responses due by August 20, 2026. While specific performance location details are not provided, the work is intended to support state-level operations under the Texas Health and Human Services Commission. There is no set-aside designation specified, and the contract does not list a point of contact, requiring interested parties to access the full solicitation through the provided Texas SmartBuy portal link to obtain additional submission guidance.

Health and Human Services Commission

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires identification of hazardous components within pharmaceutical products and the preparation of Safety Data Sheets (SDS) that comply with OSHA’s Hazard Communication Standard and Federal Standard No. 313 to ensure regulatory alignment. All SDS documentation must meet precise technical and formatting requirements to support safe handling, storage, and disposal of hazardous pharmaceutical materials used within the Department of Defense supply chain. The work is scoped under subcontract and centered on ensuring compliance with federal safety regulations for materials processed or distributed through the Medical Supply Chain Pharm FSA. Performance is required at Fort Bliss, Texas, with a response deadline of August 4, 2026, and the contract falls under NAICS code 541690 for other scientific and technical consulting services. This effort supports the Department of Defense’s obligation to maintain safety and regulatory integrity across its pharmaceutical supply chain, emphasizing precision in hazard identification and standardized reporting. All deliverables must be accurate, timely, and fully aligned with current federal guidelines to facilitate seamless operations and regulatory audits.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data SupportThe contract titled Hazardous Materials Compliance & Safety Data Support requires the provision and ongoing maintenance of Material Safety Data Sheets and ensures all hazardous material labeling adheres strictly to OSHA and DLA standards. This subcontract is specifically set aside for Women-Owned Small Businesses and is classified under NAICS code 541690, which covers other scientific and technical consulting services. The work must be performed at Tinker Air Force Base with a zip code of 73145-8000, and proposals must be submitted by August 10, 2026, following a posting date of July 29, 2026. The contract is managed by the Department of Defense under the organization name Construction & Equipment Manu & Con and will be accessed via the DIBBS platform. Compliance with federal safety regulations and accurate documentation of hazardous substances are central to fulfilling this requirement.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Hazardous and Radioactive Materials Compliance & LabelingThis contract requires strict adherence to MIL-STD-129 and OSHA standards for the proper labeling and hazard communication of shipments containing hazardous or radioactive materials. All labeling must accurately reflect material classifications, warning symbols, handling instructions, and emergency response information to ensure compliance with military and federal safety regulations. The work is scoped for subcontract performance under the Department of Defense's Electrical Devices Division, with performance designated at FPO, zip code 09523. The solicitation closed on August 10, 2026, with a posting date of July 29, 2026, and falls under NAICS code 541690 for other scientific and technical consulting services. Compliance with documentation, marking, and packaging protocols is mandatory to meet DoD transportation and safety requirements for sensitive cargo.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract titled Hazardous Materials Compliance and Labeling requires the identification, labeling, and documentation of hazardous materials within packaging, ensuring full adherence to regulatory standards. This includes the preparation of Safety Data Sheets and the implementation of procedures that meet federal and international transport and handling regulations. All work must be performed in alignment with established compliance frameworks to ensure the safe management and communication of chemical hazards throughout the supply chain. This is a small business set-aside subcontract under the NAICS code 541690, awarded by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation was posted on July 29, 2026, with a response deadline of August 13, 2026. The contract is intended exclusively for total small business concerns as defined by the SBA, and performance is expected to support defense logistics needs without specific geographic constraints. All deliverables must be completed to meet stringent Department of Defense compliance requirements for hazardous material handling and documentation.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires comprehensive management of hazardous materials including identification, preparation of safety data sheets, and strict adherence to OSHA and DFARS regulations for all shipments. The work demands thorough understanding of federal safety and defense supply chain standards to ensure materials are properly classified, documented, and transported in full compliance with applicable laws. All activities must align with the Department of Defense’s maritime supply chain requirements as managed by the MARITIME SUPPLY CHAIN ESOC BUYS division, with performance expected to meet rigorous federal procurement standards. The solicitation is classified as a subcontract under NAICS code 541690, indicating a focus on other scientific and technical consulting services related to environmental and safety compliance. Respondents must submit their proposals by August 10, 2026, with no set-aside provisions specified. The contract does not designate a specific place of performance or point of contact, suggesting the work may be performed remotely or across multiple locations as needed to support defense logistics. All documentation and compliance measures must be maintained to support audit readiness and regulatory inspection by federal authorities.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA Hazard Communication standards and DFARS 252.223-7001 for the handling and management of hazardous materials, with specific obligations to generate accurate Safety Data Sheets and apply proper hazard labeling in accordance with regulatory requirements. All activities must align with federal mandates for chemical safety communication, ensuring that personnel and downstream users receive consistent, standardized hazard information. The work is to be performed at a designated location in Dickson, Tennessee, with a zip code of 37055-0248, and is classified under NAICS code 541690 for other scientific and technical consulting services. This is a subcontract opportunity posted by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MANU & CON, with a response deadline of August 10, 2026. No set-aside type is specified, and the solicitation number is SPE8EF26T1526. The contractor must be prepared to meet all documentation, labeling, and procedural requirements tied to hazardous material handling as defined by both occupational safety and defense acquisition regulations. Compliance is mandatory and will be subject to verification throughout the performance period.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Hazard Communication and Safety Data Sheet (SDS) ComplianceThe contract requires strict adherence to OSHA’s Hazard Communication Standard 29 CFR 1910.1200, mandating accurate hazard labeling and the proper preparation and dissemination of Safety Data Sheets for all chemicals handled under the agreement. Compliance must extend to all subcontractors involved, ensuring that hazard information flows seamlessly through the supply chain without interruption or omission. The scope centers on maintaining regulatory integrity in chemical safety documentation and communication, with expectations that all materials, containers, and documentation meet federal standards for clarity, consistency, and accessibility. This subcontract is issued under the NAICS code 541690 and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and is accessible via the DIBBS platform. While specific performance locations and point of contact details are not provided, the requirement for SDS flow-down to subcontractors implies a broad operational footprint across multiple sites and vendors. All parties must be prepared to demonstrate full compliance with federal hazard communication protocols, including training, documentation, and recordkeeping, as a condition of contract execution.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

Domestic Ocean Transportation (If Applicable)The contract requires the transportation of the RAMP ANGLE via a U.S.-flagged vessel if ocean transit is necessary between U.S. ports, ensuring full compliance with the Cargo Preference Act. This obligation mandates the use of American-owned, -crewed, and -registered vessels for any maritime leg of the movement, reinforcing national maritime security and economic interests. The work is classified as a subcontract under NAICS code 483111, which pertains to support activities for water transportation, and is managed by the DLA Fleet Readiness Center under the Department of Defense. The place of performance is specified as Cherry Point, North Carolina, with a zip code of 28533-0021, indicating the primary location where the transportation task is to be coordinated or delivered. The solicitation was posted on July 29, 2026, with proposals due by August 6, 2026, providing a limited window for interested parties to respond. There is no specified set-aside or small business preference, and no point of contact is listed, suggesting the solicitation is open to all qualified vendors capable of meeting the Cargo Preference Act requirements.

Deep Sea Freight Transportation

POSTED

DEADLINE

RAMP ANGLE Supply and DeliveryThe contract involves the supply, packaging, labeling, and delivery of a RAMP ANGLE with National Stock Number 1560LLNC10614 to Marine Corps Air Station Cherry Point in North Carolina. All materials must comply with rigorous military inspection and quality standards, and the supplier is required to deliver the item with zero non-conformances, ensuring full adherence to defense specifications. The item falls under NAICS code 336412, indicating it is related to aircraft manufacturing, and the contract is structured as a subcontract under the Department of Defense, specifically managed by the DLA Fleet Readiness Center DLA PSC. Delivery must be completed by the response deadline of August 6, 2026, and the place of performance is clearly designated as Cherry Point with ZIP code 28533-0021, emphasizing the need for precision in logistics and documentation to meet military operational requirements.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Military Packaging and Labeling ServicesThe contract requires comprehensive packaging, marking, and labeling of delivered components in strict accordance with military standards, with specific emphasis on the application of 2D Data Matrix barcoding and proper palletization to ensure traceability and compliance throughout the supply chain. All work must be performed to meet Department of Defense requirements for durability, identification, and logistics readiness, ensuring components are protected and identifiable from receipt through final deployment. This subcontract, issued by the DLA Fleet Readiness Center DLA PSC under the NAICS code 561910, is open for response until August 6, 2026, with performance expected to occur at Cherry Point, North Carolina, zip code 28533-0021. The solicitation is part of the Defense Logistics Agency’s effort to secure reliable service providers capable of executing precise military packaging processes, though no set-aside designation is specified. Interested parties must submit responses via the designated DIBBS portal by the stated deadline.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract pertains to the classification of shipped materials according to their hazardous properties and the preparation of Safety Data Sheets that comply with OSHA’s 29 CFR 1910.1200(g) and Federal Standard No. 313. This work involves accurately identifying chemical hazards, assigning proper classification codes, and drafting complete, compliant documentation to ensure safe handling, storage, and transport of hazardous substances. The deliverables must adhere strictly to federal regulations to support workplace safety and regulatory compliance across military and defense operations. The contract is issued as a subcontract under NAICS code 541620, which covers scientific and technical consulting services, and is managed by the Department of Defense through the DLA Fleet Readiness Center DLA PSC. Performance is required at Cherry Point, North Carolina, with a response deadline of August 6, 2026. The solicitation does not specify a set-aside type or point of contact, and bidders must submit proposals through the DIBBS portal prior to the deadline to be considered for award. Compliance with all regulatory standards and accurate SDS documentation are critical to meeting the obligations of this agreement.

Environmental Consulting Services

POSTED

DEADLINE

Supply of Precision Insert Component (NSN 5325-LL-NCC-3569)The contract requires the procurement or manufacture and delivery of eight precision metal insert components specified under the military National Stock Number 5325-LL-NCC-3569, ensuring full compliance with all relevant defense standards. Each unit must be produced to exacting technical specifications and accompanied by compliant packaging and labeling as mandated by military protocols. The work is classified as a subcontract under NAICS code 332721, indicating it falls within the die and tool making industry, and is solicited by the DLA Fleet Readiness Center DLA PSC, a subordinate of the Department of Defense. Performance is designated for Cherry Point, North Carolina, with a zip code of 28533-0021, and all deliveries must be completed by the response deadline of August 6, 2026. The request was posted on July 29, 2026, providing a nine-day window for qualified vendors to submit proposals through the DIBBS platform.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Supplier of Regulated Industrial MaterialsThe contract seeks a supplier to provide raw or finished industrial materials such as metals, plastics, and coatings that comply with strict military and Defense Logistics Agency technical specifications, requiring full traceability and certified documentation for every shipment. The materials must meet rigorous quality and compliance standards to support defense operations, with an emphasis on accountability and adherence to regulated supply chain protocols. The opportunity is designated as a subcontract under NAICS code 325199, issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, under the zip code 28533-0021. Responses are due by August 6, 2026, and the solicitation is accessible online through the DIBBS platform, indicating it is part of a formal procurement process for critical defense-industrial components.

All Other Basic Organic Chemical Manufacturing

POSTED

DEADLINE

Compliant Shipping and Transportation of Regulated GoodsThe contract requires the arrangement of ocean and domestic freight shipments for regulated materials, with strict adherence to U.S.-flag vessel requirements and documentation standards set by the Defense Logistics Agency. All transportation activities must comply with federal regulations governing the movement of controlled goods, ensuring proper handling, tracking, and recordkeeping throughout the supply chain. The primary place of performance is Cherry Point, North Carolina, with operations likely involving coordination across multiple ports and logistics hubs to support Department of Defense readiness objectives. This is a subcontract under NAICS code 488510, which pertains to freight transportation arrangement, and is issued by the DLA Fleet Readiness Center under the Department of Defense. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026. While specific payment terms and performance metrics are not detailed here, full compliance with DLA documentation protocols and the use of U.S.-籍 vessels are mandatory, making vendor experience in defense logistics and regulatory expertise critical for qualification. The contract is accessible via the DIBBS platform under solicitation number SPEFA526T0963.

Freight Transportation Arrangement

POSTED

DEADLINE

Metal Certification and Quality Assurance TestingThe contract requires the performance of comprehensive quality testing and the provision of metal certifications, including mill test reports, in strict compliance with military and industry standards such as SAE AMS-QQ-A-200/11A and MIL-STD-1916. The work involves verifying material composition, mechanical properties, and conformance to specified technical requirements to ensure suitability for defense-related applications. All testing and certification deliverables must meet the rigorous benchmarks set by these standards to guarantee the integrity and reliability of metal components used in critical systems. This is a subcontract opportunity under NAICS code 541380, issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, ZIP 28533-0021. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026. The contract is not subject to a specific set-aside designation, and interested parties must respond through the designated DIBBS platform prior to the deadline to be considered for award.

Testing Laboratories and Services

POSTED

DEADLINE

Radioactive Materials Handling and MarkingThe contract titled Radioactive Materials Handling and Marking requires the identification, measurement, and precise labeling of items that contain radioactive materials exceeding established regulatory thresholds, with strict adherence to military marking standards and all applicable subcontract flow-down requirements. Work must be performed at the specified place of performance in Cherry Point, North Carolina, with all activities designed to ensure full compliance with federal and defense-specific regulations governing hazardous materials handling and signage. The solicitation is issued as a subcontract under NAICS code 541620, associated with the Department of Defense through the DLA Fleet Readiness Center DLA PSC, and responses are due by August 6, 2026, with the opportunity posted on July 29, 2026. Participants must be prepared to demonstrate technical capability, regulatory knowledge, and proven experience in handling radioactive substances in a military context, with all deliverables subject to verification against authorized military and safety protocols.

Environmental Consulting Services

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires the provision of compliant packaging, hazard warning labels, and Safety Data Sheets for hazardous materials, ensuring full adherence to federal and military regulatory standards. All deliverables must meet rigorous safety and documentation requirements to support secure handling, transportation, and use of hazardous substances within defense operations. The work is tied to a subcontract under the Department of Defense, specifically managed by the DLA Fleet Readiness Center DLA PSC, with performance focused at Cherry Point, North Carolina, 28533-0021. The solicitation was posted on July 29, 2026, and responses are due by August 6, 2026, under NAICS code 326199, which corresponds to other plastics product manufacturing. There is no set-aside designation specified, and the contract is open to eligible subcontractors capable of meeting the stringent compliance criteria for hazardous material documentation and labeling. Participants must ensure all materials and labeling conform to Department of Defense and federal hazardous materials regulations without exception.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Hazardous Materials Handling and ComplianceThe contract pertains to the handling and compliance of hazardous materials under stringent regulatory frameworks, requiring strict adherence to OSHA and military standards for labeling, documentation, and safe operational procedures. All activities must align with federal safety protocols to ensure the proper management, transport, and storage of hazardous substances within designated facilities. Performance is centered at Cherry Point, North Carolina, with the Department of Defense through its DLA Fleet Readiness Center DLA PSC as the contracting entity, and the work falls under NAICS code 493190 for other support activities for transportation. The contract is structured as a subcontract and requires response by August 6, 2026, with an emphasis on full regulatory compliance as a non-negotiable condition of performance.

Other Warehousing and Storage

POSTED

DEADLINE

Transportation and FOB Destination Freight ServicesThe contract is for transportation and FOB Destination freight services to move manufactured components from their origin to Cherry Point, NC, with the contractor assuming full responsibility for all risks, costs, and logistics until the goods are delivered to the specified destination. Under FOB Destination terms, ownership and liability remain with the transporter until the load arrives at the final delivery point, meaning the contractor must cover any damage, loss, or delay during transit. The NAICS code 484121 identifies this as a contract for truck transportation of freight, specifically focused on less-than-truckload and truckload services within the general freight moving industry. The solicitation, issued by the Department of Defense through the DLA Fleet Readiness Center, has a response deadline of August 6, 2026, and the place of performance is clearly defined as Cherry Point, NC, with the zip code 28533-0021. This is designated as a subcontract opportunity, indicating it is part of a larger procurement effort under a prime contract, with no set-aside classification specified and no point of contact details provided.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE