Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Compliance (If Applicable)

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires compliance with OSHA’s Hazard Communication Standard, 29 CFR 1910.1200, for any skid or its components that contain hazardous materials. This includes providing complete hazard communication, accessible safety data sheets, and proper labeling to ensure safe handling, storage, and use. The requirement is conditional and applies only if hazardous materials are present, but when applicable, full adherence to federal safety regulations is mandatory. The contract is a subcontract under the NAICS code 541620, issued by the Department of Defense through the agency name Construction & Equipment Manu & Con, with performance location specified as Texarkana, Texas, 75507-5000. The solicitation was posted on August 3, 2026, with a response deadline of August 6, 2026, and is accessible via the DIBBS system for qualified subcontractors.

General Info

Must comply with OSHA hazard communication for hazardous materials on skids in Texarkana, Texas, per DoD subcontract.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

If the skid or its components contain hazardous materials, provide hazard communication, safety data sheets (SDS), and labeling per OSHA 29 CFR 1910.1200.

Similar Contracts

Same NAICS industry code

SWPPP ServicesRanger Pipelines Incorporated is seeking a subcontractor to develop, conduct inspections, and perform compliance monitoring for a Stormwater Pollution Prevention Plan (SWPPP) associated with a construction project. The scope of work centers on ensuring adherence to environmental regulations during all phases of construction, including the preparation of a comprehensive SWPPP, routine site inspections to identify and mitigate potential stormwater contamination, and ongoing monitoring to maintain regulatory compliance. The contract is designated as a small business set-aside under SBA programs, open to Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. The NAICS code 541620 indicates the work falls under environmental consulting services. The solicitation was posted on August 4, 2026, with responses due by August 8, 2026, and the place of performance is not specified beyond the broader context of the project, which is linked to the City of Williams Wastewater Collection System Improvement Project. Interested parties must respond through the provided SBA opportunity portal.

Ranger Pipelines Incorporated

POSTED

about 10 hours ago

DEADLINE

Integrated Pest Management (IPM) Planning & ReportingThe contract encompasses the development and ongoing maintenance of an Integrated Pest Management (IPM) plan tailored to federal compliance standards, requiring detailed documentation of pest activity, treatment histories, and chemical usage reports. Quarterly compliance summaries must be prepared to ensure sustained audit readiness, with all records structured to meet federal oversight requirements. The scope is focused on delivering a proactive, science-based pest control strategy that minimizes environmental impact while adhering to regulatory guidelines. This subcontract is set aside exclusively for small businesses and designated socio-economic categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The NAICS code 541620 designates it under Environmental Consulting Services, and the performance is tied to the ETR/Excelsior Springs Job Corps facility. Responses are due by August 14, 2026, with no specified place of performance or point of contact listed, and the opportunity is publicly accessible through the SBA’s opportunity portal.

ETR/Excelsior Springs Job Corps

POSTED

about 10 hours ago

DEADLINE

Environmental Compliance and MonitoringThe contract under the title Environmental Compliance and Monitoring requires the provision of stormwater management, erosion control inspections, and regulatory compliance reporting throughout the duration of construction activities. The services are critical to ensuring adherence to environmental regulations and mitigating impacts on surrounding ecosystems during infrastructure development. The successful bidder must conduct routine inspections, document findings, implement corrective actions as needed, and submit timely compliance reports to meet state and federal environmental standards. The work is tied to a specific construction project, though the exact location is not specified in the available data. This is a subcontract awarded under a Small Business set-aside program, allowing eligibility to Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, SBA-certified Service-Disabled Veteran-Owned Small Business, and Disadvantaged Business Enterprise entities. The NAICS code 541620 indicates that the work falls under Environmental Consulting Services, aligning with technical environmental monitoring and compliance functions. Solicitations were posted on August 4, 2026, with responses due by August 28, 2026. The contracting agency is Ardurra Group, Inc., and the procurement is linked to the Corydon Well Replacement C2305-1 project, as referenced through the SBA Opportunity portal.

Ardurra Group, Inc.

POSTED

about 10 hours ago

DEADLINE

Environmental or Erosion Control Services for Pond ConstructionThe contract is for environmental and erosion control services related to the construction of a fire pond at the Iroquois Job Corps Center, focusing on stormwater management, installation of erosion control measures, and full compliance with the Site Water Pollution Prevention Plan. It requires the contractor to implement solutions that prevent sediment runoff, protect nearby water resources, and adhere to all applicable regulatory standards during and after construction. The work is intended to support the supplemental water project, ensuring environmental safety and regulatory alignment throughout the project lifecycle. The opportunity is designated as a subcontract under the SBA’s small business set-aside program, specifically reserved for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities. It is classified under NAICS code 541620 for environmental consulting services, and responses must be submitted by August 15, 2026. The solicitation is posted on the SBA’s opportunity portal, with no specified point of contact or physical location details provided beyond the project site at the Iroquois Job Corps Center.

Iroquois Job Corps Center

POSTED

about 10 hours ago

DEADLINE

Post-Remediation Verification and Environmental TestingThe contract pertains to post-remediation verification and environmental testing for mold remediation, requiring independent air and surface sampling, laboratory analysis, and the preparation of a written Post-Remediation Verification (PRV) report to confirm the success of the remediation efforts. The work is part of a subcontract under the SBA’s set-aside programs, with eligibility restricted to small businesses including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The effort is tied to a NAICS code of 541620, indicating environmental consulting services, and is administered by Serrato Corporation DBA Flint Hills Job Corps. All sampling and analysis must meet recognized standards to ensure accurate validation of remediation outcomes, and the final deliverable must clearly document compliance with remediation goals. Responses are due by August 13, 2026, and the solicitation is accessible through the SBA’s opportunity portal.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 10 hours ago

DEADLINE

Environmental Compliance and Remediation ServicesTKE Engineering, Inc. is seeking a subcontractor to provide environmental compliance and remediation services focused on the assessment, monitoring, and mitigation of environmental impacts related to stormwater management, erosion control, and contamination prevention. The work is tied to the Corydon Well Replacement Project and requires expertise in regulatory adherence and on-site environmental protection measures. The contract is designated as a subcontract under a Disadvantaged Business Enterprise (DBE) set-aside for the Department of Transportation, with additional eligibility for Minority Business Enterprise (MBE) certification through NMSDC and Woman Business Enterprise (WBE) certification through WBENC, both applicable for non-federal contracting. The NAICS code 541620 identifies the work as environmental consulting and related services. Proposals must be submitted by September 1, 2026, and the opportunity was posted on August 4, 2026, with performance expected to occur at the project site associated with the well replacement initiative.

TKE Engineering, Inc.

POSTED

about 10 hours ago

DEADLINE

Mold Testing and Clearance VerificationThe contract is for post-remediation air and surface sampling to verify the effectiveness of mold abatement efforts and to issue official clearance certification, ensuring that the affected areas meet safety standards following remediation work. This service is critical to confirm that mold has been successfully removed and that the environment is safe for occupancy, particularly in a residential setting like the Earle C. Clements Job Corps Center dormitories. The work must be conducted by qualified professionals using recognized sampling protocols and laboratory analysis to meet regulatory and health guidelines. This subcontract is designated under the SBA’s small business set-aside categories, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, indicating a priority for award to eligible small and disadvantaged businesses. The NAICS code 541620 classifies the work under Environmental Consulting Services, aligning with specialized environmental testing and verification activities. Responses are due by August 10, 2026, and the opportunity is posted under the SBA’s opportunity portal with the provided UI link, though specific point of contact and location details are not provided. The performance location is tied to the Job Corps Center, but no city or state is specified in the data.

Earle C. Clements Job Corps Center

POSTED

about 10 hours ago

DEADLINE

Environmental Consulting & Compliance ServicesKiewit Infrastructure West Co. is seeking a subcontractor to provide comprehensive environmental compliance services for a structural repair project, with requirements focused on stormwater pollution prevention plan development, asbestos and lead abatement, and hazardous material monitoring. The contract is classified under NAICS code 541620 for environmental consulting and is designated as a subcontract with set-aside eligibility for Disadvantaged Business Enterprise, Disadvantaged Veteran Business Enterprise, Minority Business Enterprise certified by NMSDC, and Woman Business Enterprise certified by WBENC. The solicitation was posted on August 4, 2026, and responses are due by August 6, 2026, with the place of performance tied to the broader project location linked to the SBA opportunity page. Participation is restricted to businesses meeting the specified certification criteria under state and federal disadvantaged business programs, and performance will support regulatory compliance on a transportation-related infrastructure initiative.

Kiewit Infrastructure West Co.

POSTED

about 10 hours ago

DEADLINE

Environmental MonitoringManson Construction Co. is seeking a subcontractor to provide ongoing environmental monitoring services for air, water, and noise during construction activities, ensuring full compliance with applicable regulatory standards. The contract is classified under NAICS code 541620 and falls under specific set-aside programs targeted toward Disadvantaged Business Enterprises, Disadvantaged Veteran Business Enterprises, Minority Business Enterprises certified by NMSDC, and Women Business Enterprises certified by WBENC, reflecting a commitment to inclusive contracting practices within transportation-related projects. The solicitation was posted on August 4, 2026, with a response deadline of August 6, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The work is associated with the NCMT Berth 24-11 Structural Repair project, though the exact location is not specified, and all monitoring must be conducted in alignment with state and federal environmental protection requirements.

Manson Construction Co.

POSTED

about 10 hours ago

DEADLINE

Contaminated Soil Testing and RemovalManson Construction Co. has issued a subcontract for the sampling, testing, excavation, and disposal of soil suspected of contamination stemming from historical port operations. The work involves environmental remediation activities to identify and remove potentially hazardous materials, ensuring compliance with regulatory standards for soil handling and disposal. The contract is targeted toward certified disadvantaged business enterprises, including Disadvantaged Business Enterprises under the Department of Transportation, Disadvantaged Veteran Business Enterprises under the State of California, Minority Business Enterprises certified by NMSDC, and Woman Business Enterprises certified by WBENC. The NAICS code 541620 corresponds to environmental consulting services, indicating that the scope centers on technical evaluation and remediation rather than general construction. Responses are due by August 6, 2026, and the work is expected to occur at Berth 24-11, as referenced in the provided UI link, where structural repair activities are also underway. All activities must align with environmental safety protocols and local, state, and federal guidelines for contaminated soil management.

Manson Construction Co.

POSTED

about 10 hours ago

DEADLINE

Environmental Remediation and MonitoringThe City of Roseville is seeking a subcontractor to conduct comprehensive environmental remediation and monitoring services, including soil and groundwater sampling, contamination assessment, and the implementation of a remediation plan. The work will focus on identifying and addressing environmental pollutants in soil and aquifers to ensure compliance with regulatory standards and protect public health. The subcontractor must possess the technical expertise to design and execute sampling protocols, analyze data for contamination levels, and develop and carry out site-specific remediation strategies tailored to the unique geology and hydrology of the area. The contract is classified under NAICS code 541620, indicating a focus on environmental consulting services, and is open for bidding with a deadline of August 19, 2026. The performance location is within the City of Roseville, California, though specific address details are not provided. This opportunity is not subject to any set-aside provisions, and the bid is open to qualified subcontractors with demonstrated experience in environmental site assessments and remediation. Proposals must be submitted prior to the deadline, and the selected vendor will be expected to deliver accurate findings and effective cleanup actions in alignment with state and federal environmental regulations.

City of Roseville

POSTED

about 14 hours ago

DEADLINE

Environmental and Emissions Compliance ConsultingThe contract requires consulting services to verify and document compliance with environmental and emissions regulations from the California Air Resources Board, the Environmental Protection Agency, and off-road equipment standards for generators and related construction machinery used at project sites. The scope centers on ensuring all equipment meets current regulatory requirements through thorough assessment, recordkeeping, and reporting, with the goal of maintaining legal and operational compliance throughout the project lifecycle. The work is critical to avoiding penalties and safeguarding environmental performance on-site. The contract is classified as a subcontract under NAICS code 541620 for environmental consulting services and is issued by the Eastern Municipal Water District in California. The solicitation was posted on August 3, 2026, with a response deadline of August 24, 2026. Although specific location details are not provided, the place of performance is expected to align with water district projects in California. The contract does not specify any set-aside status, and interested parties must submit proposals through the designated online portal by the stated deadline to be considered.

Eastern Municipal Water District

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

Packaging, Labeling, and Logistics SupportThe contract requires the provision of compliant packaging, barcoding, and labeling services for skid platforms in strict adherence to MIL-STD-129 standards, ensuring all items are properly marked with 2D Data Matrix symbols and government-unique identifiers to meet federal tracking and inventory requirements. The scope includes end-to-end support for labeling accuracy, data integrity, and physical documentation to facilitate seamless logistics operations within the Department of Defense supply chain. Services may extend to coordinating transportation and shipment logistics to the Defense Logistics Agency facility at Red River, Texas, involving precise handling, scheduling, and documentation compliance. All work must be performed within the specified place of performance in Texarkana, Texas, with the contract classified under NAICS code 531010 for warehouse and storage services. The opportunity is issued as a subcontract with a tight response deadline of August 6, 2026, and was posted on August 3, 2026, indicating a rapid acquisition timeline. The entity is expected to demonstrate proven capability in military packaging protocols and familiarity with DLA logistics procedures to ensure operational readiness and regulatory compliance without deviation.

POSTED

about 21 hours ago

DEADLINE

Manufacture and Supply of SKID, PLATFORM (NSN: 3990016426693)The contract requires the manufacture and supply of 271 units of SKID, PLATFORM identified by NSN 3990016426693, with strict adherence to military specifications ensuring durability, load capacity, and full compatibility with existing military handling systems. All units must be properly packaged and labeled to meet government standards and delivered to DLA DISTRIBUTION RED RIVER located in TEXARKANA, Texas, within 78 days of contract award. The work falls under NAICS code 332420, indicating it is related to metal stamping and manufacturing processes, and is structured as a subcontract within the Department of Defense procurement framework. The solicitation was posted on August 3, 2026, with responses due by August 6, 2026, emphasizing a tight turnaround for qualified vendors to submit proposals.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 21 hours ago

DEADLINE

Defense Telecommunications Equipment ComplianceThis contract mandates strict compliance with U.S. defense telecommunications equipment regulations, prohibiting the use of any covered equipment or services sourced from entities deemed national security risks, specifically including Huawei and ZTE. All parties involved must ensure that no components, systems, or services derived from these prohibited sources are incorporated into any deliverables or operations under the agreement. The requirement applies to all tiers of subcontracting and extends to the entire lifecycle of the telecommunications infrastructure involved in the project. The contract is issued under the NAICS code 541511, indicating it pertains to custom computer programming services, and is structured as a subcontract within the Department of Defense framework. It was posted on August 3, 2026, with a mandatory response deadline of August 13, 2026. The place of performance and detailed office address are unspecified, but performance is expected to align with the broader objectives of the U.S. defense supply chain. Compliance with these restrictions is mandatory for award consideration, and failure to certify adherence may result in disqualification or contractual penalties. The solicitation is accessible via the DIBBS platform under reference number SPE8EF26Q0157.

Custom Computer Programming Services

POSTED

about 21 hours ago

DEADLINE

CMMC Level 2 Certified IT Security SupportThe contract seeks cybersecurity support services to achieve and maintain CMMC Level 2 compliance for systems that handle covered defense information, ensuring adherence to the Department of Defense’s cybersecurity standards. This subcontract is focused on implementing technical and procedural safeguards aligned with CMMC Level 2 requirements, which include secure configuration, access control, audit logging, and incident response measures. The work is intended to strengthen the defense supply chain’s cybersecurity posture by ensuring all relevant systems meet mandatory protection standards for sensitive federal information. The solicitation was posted on August 3, 2026, with a response deadline of August 13, 2026, and falls under NAICS code 541512 for computer systems design services. The contracting activity is linked to the Department of Defense under the organization name Construction & Equipment Manu & Con, with performance expected to occur at unspecified locations. Interested parties must respond through the DIBBS platform using the provided RFQ link, and the opportunity does not specify a set-aside designation or additional socioeconomic requirements.

Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

U.S.-Flag Vessel Transportation ComplianceAll ocean transportation under this subcontract must be performed using privately owned U.S.-flag commercial vessels, with strict adherence to U.S. flag requirements. Contractors are required to identify and report accurate details for each carrier and vessel involved in the transport, ensuring full compliance with federal regulations governing maritime operations. The contract is issued under NAICS code 483111 and is associated with the Department of Defense through its Construction & Equipment Manu & Con organization, with a response deadline of August 13, 2026, and a posting date of August 3, 2026. No set-aside provisions apply, and performance obligations are tied exclusively to the use of compliant U.S.-flag vessels regardless of origin or destination.

Deep Sea Freight Transportation

POSTED

about 21 hours ago

DEADLINE

Counterfeit Electronic Parts Detection and AvoidanceThe contract requires the implementation and maintenance of a system designed to detect and prevent the introduction of counterfeit electronic components into the supply chain, ensuring the integrity and reliability of all electronic parts used in defense-related applications. This system must be capable of identifying fraudulent, altered, or substandard components at multiple stages of procurement, manufacturing, and distribution, incorporating advanced verification technologies, inspection protocols, and data tracking mechanisms to mitigate risks associated with counterfeit electronics. The solution must be scalable, adaptable to evolving threats, and fully integrated into existing logistics and quality assurance frameworks. This subcontract is issued under the Department of Defense with a NAICS code of 811212, specifying services related to electronic equipment repair and maintenance. The solicitation is open for responses through August 13, 2026, with no set-aside restrictions indicated. Performance is expected to support defense infrastructure nationwide, though no specific location is designated. The contractor must demonstrate technical proficiency in supply chain security, electronic component analysis, and compliance with federal standards for hardware authenticity, ensuring the system remains effective against both current and emerging counterfeiting techniques without disruption to operational timelines or mission readiness.

Computer and Office Machine Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

First Destination Transportation CoordinationThis contract requires coordination with government-provided transportation services to ensure the first-destination delivery of cargo, involving the accurate and timely submission of detailed carrier and shipment information. The work is categorized under NAICS code 488999, indicating it relates to other transportation support activities, and is structured as a subcontract under the Department of Defense, specifically managed by the Construction & Equipment Manu & Con agency. The opportunity was posted on August 3, 2026, with responses due by August 13, 2026, and performance is expected to support military logistics operations without a specified geographic restriction. All involved parties must adhere to government protocols for transportation coordination and documentation to ensure seamless delivery and compliance.

All Other Support Activities for Transportation

POSTED

about 21 hours ago

DEADLINE

Vendor Shipment Module (VSM) Data SubmissionVendors are required to submit complete and compliant shipment data through the Vendor Shipment Module for all deliveries under this subcontract, including essential documents such as the bill of lading, detailed cargo specifications, and accurate carrier information. This obligation applies to all shipments tied to the contract and must be executed timely and accurately to ensure seamless logistics coordination and regulatory compliance. The solicitation, issued by the Department of Defense under the NAICS code 541512 for computer systems design services, was posted on August 3, 2026, with responses due by August 13, 2026, and performance is tied to the broader construction and equipment manufacturing and contracting framework managed by the agency. All submissions must be made via the designated online portal accessible through the provided DIBBS link to satisfy contractual obligations.

Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

Supply Chain Traceability Documentation ManagementThe contract requires the maintenance and provision of complete supply chain traceability documentation for all delivered items, ensuring strict adherence to DFARS regulations and all specified contract requirements. This obligation encompasses the end-to-end tracking of components and materials, from raw sources through manufacturing and delivery, to guarantee authenticity, integrity, and compliance with federal defense standards. Failure to maintain accurate and accessible documentation could result in noncompliance penalties, delivery rejections, or termination of contractual obligations. This subcontract, issued under the NAICS code 541611 by the Department of Defense through the agency name CONSTRUCTION & EQUIPMENT MANU & CON, is open for response until August 13, 2026. The solicitation is managed through the DIBBS platform and applies to all deliverables under the agreement, regardless of complexity or source. Contractors must ensure systems and processes are in place to support real-time audit readiness and full transparency throughout the supply chain, with no exceptions for subcontracted or third-party contributions.

Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

SPACER ASSEMBLY, TAIL R

Solicitation # SPE8EF-26-Q-0157

The contract pertains to the procurement of 109 units of a spacer assembly for a tail rotor blade with NSN 1730-01-082-6504, issued under solicitation SPE8EF-26-Q-0157 by the Department of Defense through the Defense Logistics Agency. Delivery is required within 60 days of award, and responses must be submitted by August 13, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program certification, completion of DOD export-controlled data training, and prior authorization from DLA may access the restricted technical data. The contract also requires the seller to be certified by a CMMC Level 2 C3PAO to meet cybersecurity standards. All inquiries should be directed to Russell Keiser at russell.keiser@dla.mil.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8EE-26-T-2206

The contract solicits one container length of fibrous rope, equivalent to 200 feet, under NSN 4020-01-577-8748 for delivery within 20 days of award. The procurement is governed by DLA packaging requirements and incorporates technical and quality standards referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. Covered defense information may apply, and government identification must be removed from any non-accepted supplies. The solicitation number is SPE8EE-26-T-2206, issued on August 3, 2026, with responses due by August 14, 2026. The NAICS code is 326220, and the contracting agency is the Department of Defense under the Construction & Equipment Manu & Con organization. Performance is required at Fort Bliss, Texas, 79906-0000, with Philip Ferrara as the primary point of contact, reachable via email and phone provided. The procurement is identified as a federal solicitation with no set-aside classification.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8EF-26-T-1383

The contract solicitation seeks 271 units of NSN 3990016426693 SKID, PLATFORM to be delivered to DLA DISTRIBUTION RED RIVER within 78 days of award. Only approved sources, identified as 75Q65 and 94231 03159940013, are eligible to respond, though all responsible parties may submit quotes if received on time. The solicitation is issued as an RFQ under number SPE8EF26T1383 with a submission deadline of July 6, 2026, and no hard copies are available—quotes must be submitted electronically via the online portal. Technical specifications, plans, or drawings are not provided, and the procurement is categorized under NAICS code 333924 with no set-aside type designated. The contracting activity is managed by DLA Troop Support under the Department of Defense, based in Philadelphia, Pennsylvania, with all inquiries directed to the designated point of contact via email. The opportunity can be accessed online through the SAM.gov portal using the provided UI link.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE