Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Handling and Labeling Compliance

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Hazardous Materials Handling and Labeling Compliance, is issued by the Defense Logistics Agency under the Department of Defense. The primary objective of the agreement is to ensure strict adherence to safety regulations regarding the identification, labeling, and Safety Data Sheet requirements for hardware shipments associated with defense contracts. Operating under NAICS code 562910, the contract focuses on the critical safety protocols necessary for transporting hazardous materials. The engagement is managed through the Defense Logistics Agency to maintain regulatory compliance and operational safety across the defense supply chain.

General Info

DLA subcontract for hazardous materials handling, labeling, and safety compliance for defense shipments.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

562910 - Remediation Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A624F262P.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RIVET, BLIND

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 2

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Support compliance with hazardous materials identification, labeling, and Safety Data Sheet (SDS) requirements for defense contract hardware shipments.

Similar Contracts

Same NAICS industry code

Theatre Mold Remediation Scope of Work

Solicitation # AT25-0006

Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project was necessitated by a sprinkler system failure and requires the remediation of the entire building in accordance with ANSI/IICRC S520 standards, EPA and OSHA regulations, and the Micro Air Inc. Mold Testing report dated April 11, 2024. The scope of work includes cleaning or replacing theater seating cushions, remediating all visible interior components such as concrete floors and CMU walls, replacing affected drywall and acoustical ceiling tiles, and performing dehumidification to maintain humidity levels at or below 50 percent. A Certified Industrial Hygienist must be provided to verify materials, conduct daily site visits, and perform the final clearance walkthrough. This is a single lump sum contract set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Award will be based on best value, with evaluation weights assigned to price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Bidders must have attended a mandatory site visit on October 27, 2026, and must submit typed proposals on company letterhead by November 9, 2026. Required submission documents include a detailed cost breakdown, a timeline for substantial completion, proof of a valid Indiana Contractor's License, Davis Bacon Act wage rate certification, and specific insurance certificates naming Adams and Associates, Inc. as an additional insured. Work must commence within 14 days of the Notice to Proceed, and payment terms are Net 30.

Atterbury Job Corps Center

POSTED

about 2 hours ago

DEADLINE

Asbestos and Lead-Based Paint Abatement

Fulton County Purchasing Department

POSTED

about 4 hours ago

DEADLINE

Lead and Asbestos Testing and RemovalThis subcontract for the City of Fort Lauderdale involves the testing, abatement, and disposal of lead-based paint and asbestos-containing materials for bridge projects managed by the Public Works Department. The selected contractor will be responsible for collecting samples for laboratory analysis, installing necessary containment systems, and transporting all hazardous materials to approved disposal facilities. The contractor must ensure full compliance with all federal, state, and local regulations throughout the process. Key deliverables include the provision of detailed laboratory analysis reports and official certified documentation for disposal and clearance. The response deadline for this opportunity is November 30, 2026.

City of Fort Lauderdale

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Environmental Site Investigation and RemediationThis subcontract for Environmental Site Investigation and Remediation involves performing critical site assessments and land remediation for prime contractors working on Defence Infrastructure Organisation residential projects at Feltham Barracks. The scope of work focuses on a former military intelligence facility, where the provider must conduct extensive soil and groundwater testing to identify contaminants and implement effective remediation strategies to ensure the land is safe for residential development. The contractor is responsible for delivering comprehensive environmental impact reports and obtaining the necessary remediated site certifications. Operating under NAICS code 562910, the project ensures that all environmental hazards are mitigated in accordance with safety standards to facilitate the transition of the military site into a residential area.

Defence Infrastructure Organisation

POSTED

about 7 hours ago

DEADLINE

Asbestos Removal and AbatementThis subcontract for Asbestos Removal and Abatement involves the physical removal, containment, and disposal of asbestos-containing materials for prime contractors working on University of Bedfordshire facility projects. The selected provider must implement strict containment measures, including the use of negative pressure units and HEPA filtration systems, to prevent fiber release and ensure the safe transport of hazardous waste in accordance with UK regulations. To qualify, the contractor must hold a Licensed Asbestos Removal Contractor certification and maintain full compliance with HSE standards. Key deliverables include the provision of certified asbestos-free areas and the submission of official waste consignment notes. The response deadline for this opportunity is November 27, 2026.

University of Bedfordshire

POSTED

about 8 hours ago

DEADLINE

Provision of Asbestos Management & Compliance Service

Solicitation # UoB/P EST - 00000747

The University of Bedfordshire is soliciting proposals under solicitation number UoB/P EST - 00000747 for the provision of asbestos management and compliance services. This contract, categorized under asbestos removal services, covers multiple performance locations including Bedford, Luton, Buckinghamshire CC, and the broader Bedfordshire and Hertfordshire area. The estimated total value of the contract is 141,666 GBP excluding VAT. The initial period of performance is estimated to run from January 1, 2027, to December 31, 2029, with the possibility of two twelve-month extensions extending the term through December 31, 2031. Interested parties must submit their responses via the in-tend portal by the deadline of November 27, 2026, at 12:00pm. Detailed award criteria and specific deliverables are contained within the tender documents available on the procurement portal.

University of Bedfordshire

POSTED

about 8 hours ago

DEADLINE

Mold Abatement SpecialistThis subcontract opportunity is for a Mold Abatement Specialist to provide removal and remediation services for prime contractors working on Montebello Unified School District facility projects in Montebello, California. The scope of work includes the installation of containment, three-stage decontamination units, and negative air pressure systems. Specific tasks involve removing drywall and ceiling grid tiles, followed by HEPA vacuuming, wet wiping, and kiln painting to the studs to ensure a mold-free environment verified by third-party clearances. The project requires the use of certified mold abatement technicians and strict adherence to CAL/OSHA compliance standards. Interested parties must respond by November 2, 2026. The work falls under NAICS code 562910 and is focused on delivering safe, remediated spaces within the school district's facilities.

Montebello Unified School District

POSTED

about 10 hours ago

DEADLINE

MPE Three Classroom Mold Abatement - Rooms 22, 23, 24

Solicitation # 01 (2026-2027)

The Montebello Unified School District is soliciting bids under RFQ No. 01 (2026-2027) for mold abatement services in three classrooms, specifically Rooms 22, 23, and 24 at MPE in Montebello, California. The scope of work includes the abatement process, cleaning of A/C systems, and the movement of furniture before and after the project. Contractors must utilize containment, three-stage decors, and negative air pressure, while maintaining CAL/OSHA safety standards and good housekeeping. All work will be monitored by a third-party consultant, and the contractor is responsible for any necessary re-cleaning if good clearances are not achieved. Regulated disposal must be accompanied by a manifest, and proper mold signage and yellow caution flagging are required on-site. Bids must be submitted by November 2, 2026, at 9:00 a.m. via the designated secure portal. The contract will be awarded to the best value bidder based on price, proven ability to comply with specifications, capability, and credibility, with a preference for local firms in the event of equal low bids. Requirements for submission include a Non-Collusion Affidavit and a Certificate of Workers' Compensation Insurance. The successful vendor must provide a minimum one-year warranty and maintain comprehensive insurance naming the District as an additional insured. Payment is due 30 days after the receipt of a correct invoice or acceptance of goods. The District reserves the right to terminate the agreement with 30 days' written notice or immediately upon failure to perform.

Montebello Unified School District

POSTED

about 10 hours ago

DEADLINE

Industrial Tank Cleaning & Desludging ServicesThis subcontract for Industrial Tank Cleaning and Desludging Services supports prime contractors on Mid Atlantic Regional Maintenance Center projects located at Naval Station Norfolk. The scope of work involves the dewatering, desludging, and washing of various industrial equipment, specifically Ramco 700 gallon dip tanks, Peabody Engineer 700 gallon de-scaler dip tanks, and parts washers ranging from 40 to 180 gallons. The selected provider must utilize industrial vacuum equipment and sampling kits to deliver cleaned tanks and extracted samples. The opportunity is designated as a total Small Business Set Aside under NAICS code 562910. A critical requirement for performance is that the contractor must hold Joint Certification Program certification. Interested parties should note the response deadline of November 12, 2026, for this Department of Defense agency requirement.

Mid Atlantic Reg Maintenance Ctr

POSTED

about 12 hours ago

DEADLINE

UST Removal and Environmental RemediationThis subcontract for UST Removal and Environmental Remediation involves the removal of underground storage tanks at the US Army Watervliet Arsenal facility. The selected contractor will be responsible for pumping out water and oil, executing tank extraction, and performing comprehensive post-removal site cleaning and inspection using specialized pumping and excavation equipment. Key deliverables include the removed tanks, a detailed site inspection report, and all necessary disposal documentation. The project requires strict adherence to safety and regulatory protocols, including the development of a UST Work Plan and the procurement of Confined Space entry permits. This opportunity is designated as a Total Small Business Set Aside under NAICS code 562910. Interested parties must submit their responses by November 12, 2026, for this Department of Defense project located in zip code 12189.

POSTED

about 12 hours ago

DEADLINE

Hazmat Emergency Response ServicesThis subcontract for Hazmat Emergency Response Services supports prime contractors on Department of Veterans Affairs healthcare facility projects in Los Angeles. The scope of work involves providing rapid-response personnel and specialized equipment, including vacuum trucks, spill kits, and personal protective equipment, to contain and remediate unplanned hazardous material releases. The selected provider is responsible for performing comprehensive cleanups of contaminated areas and delivering detailed spill remediation and incident reports. All field personnel assigned to this contract must hold HAZWOPER certification to ensure safety and regulatory compliance. The opportunity is categorized under NAICS code 562910 and is managed through the Department of Veterans Affairs Network Contract Office 22. Interested parties should note the response deadline of November 7, 2026.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 12 hours ago

DEADLINE

Hazardous Material AbatementThis 8(a) set-aside subcontract for Hazardous Material Abatement involves the removal and disposal of asbestos-containing materials at Building 592 for USACE/NAVFAC facility projects. The scope of work includes the removal of approximately 30 linear feet of Aircel pipe insulation and 100 square feet of Galbestos siding across the mezzanine, second floor, and roof elevations to ensure certified asbestos-free work areas. The project is managed under the Department of Defense via Navfacsyscom Mid-Atlantic and will be performed in Philadelphia, Pennsylvania. Interested parties must respond by December 1, 2026, for this opportunity categorized under NAICS code 562910.

Navfacsyscom Mid-Atlantic

POSTED

about 12 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

MIL-STD Packaging and Logistics ServicesThis subcontract for MIL-STD Packaging and Logistics Services supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves providing specialized military-grade packaging and palletization services, ensuring all items are processed according to MIL-STD-129, RP001, and ASTM D3951 standards. The provider must utilize compliant labeling and industrial equipment to deliver shipments that are fully prepared for FOB Origin transport. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

Safety Cone Supplier (NSN 6250-00-334-6183)This subcontract involves the procurement of 589 safety cones to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for manufacturing or sourcing cones identified by NSN 6250-00-334-6183, ensuring all materials strictly adhere to the DLA Master List of Technical/Quality requirements and comply with the Buy American Act. The completed order of 589 safety cones must be delivered FOB Origin to Phoenix, Arizona. This requirement falls under NAICS code 339999 and is managed by the Department of Defense for the Defense Logistics Agency.

All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-00-655-1507)This subcontract involves the supply of 11 toggle switches for prime contractors supporting Defense Logistics Agency contracts. The switches must strictly adhere to NSN 5930-00-655-1507 specifications, with a specific prohibition against the use of additive manufacturing. All items must be delivered FOB Destination and must comply with packaging and marking standards established by MIL-DTL-28786, MIL-STD-129, and RP001. The contractor is required to maintain rigorous cybersecurity and data protection standards, specifically ensuring compliance with NIST SP 800-171 and DFARS 252.204-7012. This procurement falls under NAICS code 334419 and is managed through the Department of Defense.

Other Electronic Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

Domestic Electrical Component Supply (Berry Amendment Compliant)This subcontract involves the supply of raw wire, connectors, shielding, and housing for prime contractors working on Defense Logistics Agency procurement projects specifically for NSN 5995-01-696-1261. The provider is responsible for sourcing electrical grade materials that meet strict technical requirements and must include a Certificate of Conformance with all delivered components. A critical requirement of this agreement is the provision of certification of origin to ensure full compliance with the Buy American Act and the Berry Amendment. Managed under NAICS code 335131 for the Department of Defense, the contract ensures that all domestic electrical components meet the necessary federal standards for military application.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 7 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly, specifically NSN 5995-01-696-1261, for prime contractors working on Defense Logistics Agency procurement projects. The manufacturer is required to produce one completed, tested, and packaged assembly in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), with a specific prohibition against the use of additive manufacturing. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Military-Spec Packaging and International Shipping (Guam)This subcontract through the Defense Logistics Agency involves specialized military packaging, marking, and international transportation services for prime contractors delivering supplies to Guam. The scope of work specifically requires the packaging of mufflers in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 requirements. The selected provider must utilize the fastest traceable shipping methods to ensure delivery to the MESG One Detachment in Guam. This opportunity falls under NAICS code 488330 and is managed by the Department of Defense.

Navigational Services to Shipping

POSTED

about 7 hours ago

DEADLINE

Exhaust Muffler Supply (NSN 2990-01-566-4579)This subcontract involves the manufacture or procurement of one specialized exhaust muffler, identified by NSN 2990-01-566-4579, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The provider must ensure the product complies with DLA Master List of Technical and Quality Requirements RA001 and RQ011, while maintaining strict supply chain traceability documentation as specified in the contract terms. Managed under NAICS code 336390 for the Department of Defense, the agreement requires the delivery of a single completed unit. The solicitation was posted on October 28, 2026, with a response deadline set for November 4, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Sleeve Spacers (NSN 5365-01-566-4847)This subcontract involves the manufacture or sourcing of four sleeve spacer units, identified by NSN 5365-01-566-4847, to support prime contractors under a Defense Logistics Agency supply contract. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Final delivery of the units is required at Fort Bragg, North Carolina. Strict adherence to technical specifications is mandatory, including packaging according to ASTM D3951, labeling per MIL-STD-129, and palletization following RP001 standards. The opportunity falls under NAICS code 332721 and is managed through the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Mold Release Agent Supplier (NSN 8030-01-233-1265)This subcontract involves the supply of a specific mold release agent, identified by NSN 8030-01-233-1265, to support prime contractors fulfilling Defense Logistics Agency requirements. The supplier must provide one 5-gallon can delivered FOB Destination to Illinois and US APO AE. To ensure product integrity, the agent must maintain a 12-month shelf life and be stored at temperatures between 60 and 80 degrees Fahrenheit. The contractor is required to adhere to strict regulatory and military standards, including compliance with the Buy American Act, the Berry Amendment, and 29 CFR 1910.1200. Additionally, all shipments must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. This procurement falls under NAICS code 325998 and is managed through the Department of Defense.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Refractory Castable Mix (NSN 9350015694317)This subcontract involves the supply of refractory castable mix to prime contractors supporting Defense Logistics Agency contracts for the USS George H W Bush and USS Abraham Lincoln. The provider is responsible for manufacturing or sourcing material that meets NSN 9350015694317, with strict requirements for packaging according to MIL-STD-2073-1E and marking per MIL-STD-129. The agreement mandates full compliance with the Buy American Act and the Hazard Communication Standard. The scope of work requires the delivery of two units of castable mix on a FOB Destination basis. This procurement falls under NAICS code 327120 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 9, 2026.

Clay Building Material and Refractories Manufacturing

POSTED

about 7 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Hazardous Materials Packaging and Labeling Services

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Handling and Compliance

Defense Logistics Agency

POSTED

DEADLINE

Radioactive Materials Handling and Notification (If Applicable)

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling Services

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Waste Packaging & Preparation for Lithium-Ion Batteries

Defense Logistics Agency

POSTED

DEADLINE

Spill Response and Environmental Compliance Support

Defense Logistics Agency

POSTED

DEADLINE

Oil-Based and Flammable Paint Waste Management

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Liquid Waste Collection & Packaging

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Waste Lab Pack Preparation (5-15 gallon)

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Waste Lab Pack Preparation (55 gallon)

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Waste Lab Pack Preparation (20-30 gallon)

Defense Logistics Agency

POSTED

DEADLINE

Spill Response & Environmental Compliance Support

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS