Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Handling and Packaging Services

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive packaging, labeling, and handling services for circuit breakers that contain hazardous materials, specifically mercury, under strict adherence to Department of Defense and federal transportation regulations. All activities must ensure the safe management of these materials throughout the supply chain, including proper containment, clear hazard communication, and compliance with all applicable environmental and safety standards during transport and storage. The work is classified as a subcontract under NAICS code 562910, indicating specialized waste management and remediation services, and is issued by the Maritime Supply Chain under the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline of August 20, 2026, and performance is expected to occur within the scope of DOD logistics operations, though the specific place of performance is not detailed. Interested parties must demonstrate proven expertise in handling hazardous substances, particularly mercury-equipped circuit breakers, and possess the necessary certifications, equipment, and procedures to meet federal transport and safety mandates. The contract emphasizes compliance, safety, and regulatory alignment over cost alone, with all processes subject to oversight by DoD authorities.

General Info

Packaging, labeling, and handling mercury-containing circuit breakers per DoD and federal hazardous material regulations.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide packaging, labeling, and handling services for circuit breakers containing hazardous materials such as mercury, in compliance with DoD and federal transport regulations.

Similar Contracts

Same NAICS industry code

Hazardous Materials Packaging and Labeling ServicesThe contract requires the provision of compliant packaging, labeling, and documentation for defense-related items that contain hazardous materials, with strict adherence to MIL-STD-129 and MIL-STD-2073-1E standards. This includes the preparation and maintenance of Safety Data Sheets (SDS) to ensure full regulatory compliance across all phases of handling, storage, and transportation. The work must meet the rigorous requirements set by the Department of Defense for the safe and standardized management of hazardous content in military logistics and supply chains. This subcontract is issued by the DDSP NEW CUMBERLAND FACILITY under the NAICS code 562910 and is performance-based at the location in NEW CUMBERLAND, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and must be submitted through the DIBBS platform. All activities under this contract must align with federal defense regulations and ensure that hazardous material handling meets uniform military standards to safeguard personnel, equipment, and the environment during operational deployment.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Handling and ComplianceThe contract requires the safe handling, packaging, and documentation of hazardous materials with strict adherence to HAZCOM and DOT regulations, including the preparation of safety data sheets. All activities must meet federal standards for hazardous waste management and transportation, ensuring proper labeling, storage, and recordkeeping to safeguard personnel and the environment. The work is to be performed at Tracy, California, with a postal code of 95304-5000, and is structured as a subcontract under NAICS code 562910, which pertains to hazardous waste collection and treatment services. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contracting agency identified as the Department of Defense under the Construction & Equipment T & IFO EQ office. While no set-aside status or point of contact details are provided, bidders must ensure full compliance with all regulatory frameworks governing hazardous material operations and submit proposals through the designated DIBBS portal prior to the deadline. The place of performance and regulatory scope indicate this contract is critical to maintaining operational safety and regulatory compliance within military logistics infrastructure.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract requires the identification, labeling, and documentation of all hazardous components in strict compliance with OSHA’s 29 CFR 1910.1200 and the Defense Federal Acquisition Regulation Supplement DFARS 252.223-7001. This includes the accurate classification of hazardous materials and the generation of complete Safety Data Sheets for any substances that meet regulatory criteria. The work must be performed at Hill Air Force Base with a ZIP code of 84056-5734, and all deliverables must align with federal and defense-specific hazardous materials management standards. The solicitation is a subcontract under NAICS code 562910, with a response deadline of August 17, 2026, and was posted on August 5, 2026, under the Department of Defense’s Depot Hill organization.

POSTED

about 10 hours ago

DEADLINE

Hazardous Material Handling and Compliance (Mercury-Related)The contract requires the proper handling, packaging, and documentation of materials containing or contaminated with mercury in full compliance with NAVSEA 5100-003D standards, emphasizing shock-proof packaging and secondary containment to ensure safety and regulatory adherence. All submissions must include current Safety Data Sheets to meet hazardous material reporting requirements, with performance location specified in Tracy, California, at the postal code 95304-5000. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA, ensuring only qualified small business concerns are eligible to respond, and is governed under NAICS code 562910 for hazardous waste collection and treatment services. The contract was posted on August 5, 2026, with a mandatory response deadline of August 17, 2026, and is managed by the DLA Dist San Joaquin under the Department of Defense. There is no designated point of contact provided, and all interested parties must access the full solicitation details through the official DIBBS portal linked in the announcement. The absence of specific agency address details suggests the transaction is primarily digital and standardized under federal procurement protocols, with compliance and operational execution centered wholly on the designated performance location.

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires full compliance with OSHA and military standards for the labeling, safety data sheet generation, and packaging of hazardous materials used in shipments. All deliverables must align with federal regulations governing the identification, handling, and transport of dangerous goods, ensuring accurate hazard communication and safe logistics operations. The work is to be performed at the New Cumberland facility with a ZIP code of 17070-5002, and the services are classified under NAICS code 562910, which pertains to waste collection and other remediation services involving hazardous materials management. This is a subcontract opportunity issued by the Department of Defense through the DDSP New Cumberland Facility, with a response deadline of August 17, 2026, and a posted date of August 5, 2026. Failure to meet the specified compliance requirements for hazard labeling and SDS documentation could result in rejection of proposals or non-performance penalties. The contractor must demonstrate proven expertise in military-grade hazardous materials handling and possess the ability to produce documentation and packaging that withstands inspection under both civilian and defense regulatory frameworks. There is no set-aside designation specified, indicating the opportunity is open to all eligible subcontractors regardless of business size or status.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

902/903 Dorm Mold Remediation & Removal

Solicitation # 902/903 Dorm Mold Remediation and Removal

This contract involves mold remediation and removal services at two dormitory buildings—902 and 903—at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the complete remediation of mold-contaminated areas, including the removal and disposal of affected drywall, insulation, ceiling materials, and finishes, along with thorough cleaning, sanitization, and restoration to match existing conditions. All activities must comply with EPA guidelines and IICRC S520 standards, utilizing negative air pressure containment, HEPA filtration, and commercial-grade dehumidification equipment. Post-remediation verification, including air quality testing if necessary, must be documented and submitted. The work is to be performed within 60 consecutive business days after receipt of a Notice to Proceed, with a required site visit and signed attendance roster prior to bid submission. The contract type is a fixed-price, single lump sum, with an estimated value between $25,000 and $100,000. Bidders must submit a detailed cost breakout on company letterhead itemizing labor, materials, equipment, fees, bonds, subcontractor costs, overhead, and profit. A bid bond equal to 20% of the base bid is required if the bid is $25,000 or more, along with performance and payment bonds at 100% of the contract price, issued by an A-rated surety. Contractors must provide proof of insurance covering workers’ compensation, general liability, automobile, and professional liability, and must comply with federal wage requirements under the Construction Wage Rate Requirements and Executive Order 13658, submitting weekly certified payroll reports. Hazardous materials used must be accompanied by Safety Data Sheets, and all waste must be collected daily and removed off-site in accordance with environmental regulations. The project is subject to strict debarment and suspension disclosures under FAR 52.209-6, and subcontractors must self-certify their business category per NAICS code 562910. The contracting entity is Management & Training Corporation (MTC), acting on behalf of the U.S. Department of Labor, and the solicitation is set aside exclusively for small business concerns including small disadvantaged, women-owned, veteran-owned, and HUBZone small businesses. Proposals must be submitted via email by August 10, 2026 at 3:00 PM CST, and awards will be made based on

Earle C. Clements Job Corps Center

POSTED

about 11 hours ago

DEADLINE

Mold Remediation

Solicitation # mold-remediation

The contract seeks a licensed mold remediation contractor to perform remediation services at the Solo Parent Dormitory within the Flint Hills Job Corps Center in Manhattan, Kansas, specifically targeting rooms 208, 209, 210, 302, 310, and the 300 hallway linen closet. The work must adhere to the IICRC S520 Mold Remediation Standard, EPA guidelines, OSHA regulations, and Job Corps safety and facility standards, with all containment procedures requiring critical barriers and HEPA-filtered negative air machines. The contractor must remove contaminated porous materials such as drywall, insulation, and carpeting, clean and treat surfaces with EPA-registered antimicrobials, and bag and seal all waste for proper disposal. A comprehensive post-remediation verification process, including visual inspections, air and surface sampling, and a detailed written report with lab results and photographs, is mandatory for acceptance. The performance period is limited to 10 business days, and a one-year warranty on the remediation work is required. The solicitation is designated as a small business set-aside, open to SBA-certified categories including SB, SDB, WOSB, HUBZone SB, VOSB, and SDVOSB. Offerors must submit a complete proposal that includes a detailed pricing schedule with labor, material, and total costs, along with a W-9 form and DUNS number. Compliance with the Davis Bacon Act wage determinations is required, and contractors must provide a Certificate of Liability Insurance naming the Job Corps Center as both certificate holder and additional insured. Awards will be made to the offeror whose proposal is most advantageous based solely on price and price-related factors, with material compliance serving as a pass/fail gate—any non-compliance results in disqualification. Upon award, the contractor must submit SF-1413 and, if the contract exceeds $30,000, Serrato Form 542. The deadline for proposal submission is August 13, 2026, at 4:00 PM CST.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 11 hours ago

DEADLINE

Erosion and Sediment Control InstallationThe contract outlines the installation of erosion and sediment control measures including silt fences, fiber rolls, erosion control blankets, and temporary seeding to manage runoff during and after construction activities. These measures are critical for preventing soil displacement and protecting nearby waterways from sedimentation, ensuring compliance with environmental regulations throughout the project lifecycle. The work is scoped to support infrastructure development under the oversight of the Texas Department of Transportation, with performance expected across unspecified locations within the state. Subcontractors must submit bids by September 2, 2026, under the NAICS code 562910 for other waste management services, indicating the environmental remediation focus of the task. The solicitation is not designated for any specific set-aside program and is posted via the Texas SmartBuy portal, reflecting a state-level procurement process requiring vendors to meet technical and regulatory standards for erosion control. All work must be completed in alignment with Texas transportation and environmental guidelines, and participation requires demonstrated experience in implementing approved sediment control practices at construction sites.

Texas Department of Transportation

POSTED

about 11 hours ago

DEADLINE

Asbestos Abatement and Hazardous Material RemovalThe contract involves the safe removal, containment, and disposal of asbestos-containing flooring materials across four designated cabins, requiring full compliance with federal, state, and local environmental and health regulations. The work must be executed with stringent safety protocols to prevent asbestos fiber release, including proper containment procedures, use of approved personal protective equipment, and adherence to decontamination standards for personnel and equipment. All materials contaminated with asbestos must be handled, labeled, transported, and disposed of in licensed facilities certified for hazardous waste management. The solicitation, titled Asbestos Abatement and Hazardous Material Removal, is issued as a subcontract under NAICS code 562910 for hazardous waste collection and treatment services, and is managed by the Department of Land & Natural Resources in Hawaii. The opportunity was posted on August 4, 2026, with a response deadline of August 25, 2026, at 2:00 AM. Although no specific location details are provided beyond the state designation, performance is expected to occur within Hawaii, and bidders must ensure familiarity with state-specific asbestos regulations. The contract does not specify set-aside status, and no point of contact information is listed, leaving potential respondents to refer to the provided public link for additional details.

Department of Land & Natural Resources

POSTED

DEADLINE

MIL DEPT - Environmental Services

Solicitation # 74023

Contractors are invited to bid on the Environmental Services contract for the Vermont Military Department, covering multiple locations across the state. Proposals must be submitted by 9:00 a.m. on August 24, 2026, and any questions must be submitted in writing via email to the designated contact no later than 4:00 p.m. on August 13, 2026. While efforts will be made to address inquiries during the proposal period, contractors are expected to ensure their submissions fully comply with the RFP requirements, as deviations, including alternate methods or conditions not explicitly outlined in the RFP or its addenda, will result in a non-responsive bid. The contract is managed under solicitation number 74023, issued by the Vermont Department of Economic Development, with all performance occurring within the state of Vermont. The primary point of contact for inquiries is Lynn Metcalf, reachable via email or phone. The official bid details and submission portal are accessible through the Vermont Business Registry.

Department of Economic Development

POSTED

DEADLINE

Hazardous Material Compliance & PackagingThe contract requires strict adherence to hazardous material handling protocols for capacitors, mandating accurate labeling, secure packaging, and comprehensive documentation to meet both OSHA and military standards. All compliance activities must ensure the safe identification and transport of hazardous components, with no room for deviation from established regulatory frameworks. The work is performed under a subcontract arrangement tied to the Department of Defense, specifically managed by the MARITIME SUPPLY CHAIN ESOC BUYS entity, with performance obligations centered in Norfolk, Virginia, at the ZIP code 23511-4397. Responses to this solicitation must be submitted by August 17, 2026, and the procurement falls under NAICS code 562910, indicating it relates to hazardous waste collection and treatment services. There is no set-aside designation specified, meaning all eligible contractors may compete. The posting date is August 4, 2026, suggesting a brief but critical window for qualified vendors to prepare and submit their proposals. Failure to meet the specified compliance requirements could result in rejection or non-performance penalties, making precision in labeling and documentation non-negotiable elements of fulfillment.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Radioactive or Mercury-Containing Item HandlingThe contract requires specialized handling and packaging of mercury-containing or radioactive materials in strict compliance with NAVSEA 5100-003D and MIL-STD-129 labeling standards, ensuring proper identification, containment, and documentation for safety and regulatory adherence. The work is to be performed at Pearl Harbor with a zip code of 96860-4518, and must meet all federal military specifications for the safe management of hazardous substances. This is a subcontract under the NAICS code 562910, which pertains to other waste management services, and is issued by the Department of Defense through the Medical Supply Chain Pharm FSA. The solicitation was posted on August 4, 2026, with a response deadline of August 10, 2026, indicating a tight turnaround for interested parties to submit their proposals. All activities under this contract must prioritize safety, regulatory compliance, and precise labeling as mandated by military standards to ensure secure handling and transport of hazardous materials within the defense supply chain.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Government-Arranged Transportation (First Destination Transportation - FDT)The contractor is tasked with preparing and packaging an impeller for government-arranged sea transport under the Department of Defense’s First Destination Transportation program, ensuring full compliance with military logistics standards. This work requires precise handling and packaging procedures tailored to secure military transport requirements, with the impeller destined for delivery via sea under the supervision of the Maritime Supply Chain branch. The contract is structured as a subcontract under the NAICS code 488999, indicating it pertains to other support activities for transportation, and all activities must align with the stringent protocols enforced by the Department of Defense for defense-related cargo. The solicitation was posted on August 5, 2026, and responses are due by August 12, 2026, with no specific set-aside classification indicated. Although no organizational address or point of contact details are provided, the work must be performed in accordance with the specifications outlined by the DLA’s FDT program, and the contract is accessible via the DIBBS platform. The contractor must ensure all packaging, labeling, documentation, and readiness for sea transport meet the operational and security demands of military logistics, with no flexibility in adherence to established standards.

All Other Support Activities for Transportation

POSTED

about 10 hours ago

DEADLINE

Domestic Supply Chain Compliance and ReportingAll materials used in production must be sourced exclusively from U.S. or designated foreign countries to ensure compliance with FAR and DFARS regulations, with full documentation maintained to verify origin and traceability throughout the supply chain. The subcontract requires strict adherence to domestic sourcing requirements and demands rigorous recordkeeping to demonstrate adherence to federal procurement standards. This contract is issued by the Department of Defense through the Maritime Supply Chain office and is open for response until August 12, 2026, with materials classified under NAICS code 423840 related to wholesale trade of miscellaneous durable goods. Failure to provide accurate documentation or source non-compliant materials will result in nonconformance and potential contract termination.

Industrial Supplies Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Precision Machining of Centrifugal Pump ImpellerThe contract calls for the manufacture of two precision centrifugal pump impellers designed for critical applications requiring strict compliance with military or industrial specifications. This subcontract is part of the Department of Defense’s Maritime Supply Chain initiative and is classified under NAICS code 332112, indicating it falls within the precision machining and manufacturing sector for pumps and pumping equipment. The impellers must meet exacting quality and performance standards to ensure reliable operation in demanding environments, where failure is not an option. All work must be completed to stringent technical requirements without deviation, emphasizing dimensional accuracy, material integrity, and surface finish. The solicitation was posted on August 5, 2026, with a firm deadline for responses on August 12, 2026, leaving a limited window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, suggesting the contractor may have flexibility in location but must still meet all delivery and certification benchmarks. The contract is accessible through the DIBBS platform, and interested parties must ensure full alignment with the technical and compliance demands outlined in the full RFQ to be considered for award. There is no set-aside designation, meaning any eligible supplier may bid regardless of business size or ownership characteristics.

Nonferrous Forging

POSTED

about 10 hours ago

DEADLINE

Data retrieval failure — no sub-opportunities identifiableData retrieval for the prime contract has failed, preventing identification of any subcontract opportunities linked to this solicitation. The posting date is August 5, 2026, with a response deadline of August 17, 2026, and the opportunity is categorized as a subcontract under the Maritime Supply Chain agency within the Department of Defense. The place of performance is listed as Robins AFB with a zip code of 31098-1887, though no city, state, or country details are provided for the office address or point of contact. No solicitation number, NAICS code, set-aside type, or organization type is available, and the official link to the solicitation is accessible via the DIBBS platform.

POSTED

about 10 hours ago

DEADLINE

Commercial Item Subcontracting for Circuit BreakersThe contract seeks commercial, off-the-shelf circuit breakers that comply with National Stock Number specifications under DFARS 252.244-7999, specifically for use by the Department of Defense through the Maritime Supply Chain division. It is structured as a subcontract opportunity with no set-aside classification, meaning all qualified commercial vendors are eligible to respond. The solicitation is open for submissions from August 5, 2026, through August 20, 2026, and falls under NAICS code 423690 for other commercial equipment merchant wholesalers. The requirement is for readily available, non-customized products that meet military performance and procurement standards without modification, ensuring rapid delivery and interoperability with existing systems. Performance is expected to support DoD logistics operations, though the specific place of performance is not detailed. All bids must adhere to commercial item acquisition rules and demonstrate compliance with applicable defense procurement regulations.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Circuit Breaker Supply (NSN 5925-01-430-2318)The contract entails the supply of 134 circuit breakers identified by NSN 5925-01-430-2318 under an indefinite-delivery arrangement, with delivery terms specified as FOB origin. All items must adhere to strict military standards for packaging, labeling, and hazardous materials handling to ensure compliance with defense logistics requirements. The solicitation is classified as a subcontract, issued by the Department of Defense through the Maritime Supply Chain organization, with a response deadline of August 20, 2026, and was posted on August 5, 2026. The North American Industry Classification System code 335313 applies, indicating the work falls under electrical equipment manufacturing. The place of performance and point of contact details are not specified, and no set-aside type is designated, meaning the contract is open to all eligible contractors without preferential targeting.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Hazardous Material (Chemical/Plastic Resin)The contract calls for the supply and delivery of a hazardous plastic resin or chemical compound, with strict requirements to comply with OSHA’s Hazard Communication Standard. This includes the mandatory submission of Safety Data Sheets, accurate labeling that meets regulatory standards, and full adherence to Defense Logistics Agency shipping and inspection protocols to ensure safe handling and transport. The procurement is classified as a subcontract under a Total Small Business Set-Aside, designating it exclusively for small businesses as defined by the SBA under NAICS code 326122. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense through the Maritime Supply Chain office. All deliverables must meet federal hazardous materials requirements without exception, and performance is subject to compliance with DoD logistics and safety frameworks.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

Prohibited Telecommunications Equipment ComplianceThe contract mandates strict compliance with Section 889 of the National Defense Authorization Act, requiring that no telecommunications equipment or services from Huawei, ZTE, or other designated covered foreign entities be included in any component of the supplied item. This restriction applies across the entire supply chain, ensuring that all materials, parts, and subsystems are free from prohibited sources to safeguard national security interests. The requirement is binding on all subcontractors and suppliers involved in fulfilling the contractual obligation. The contract falls under NAICS code 334220, indicating its focus on communications equipment manufacturing, and is classified as a subcontract tied to the Department of Defense through the Maritime Supply Chain organization. It is performance-based with a designated place of performance at Pearl Harbor, Hawaii, and requires responses by August 17, 2026, following a posting date of August 5, 2026. All parties must verify and attest to compliance with the ban on covered foreign telecommunications equipment as a condition of award and ongoing performance.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)All IT and embedded systems provided under this subcontract must fully comply with NIST SP 800-171 to ensure the protection of covered defense information, requiring implementation of all required security controls and ongoing adherence to cyber incident reporting protocols. The equipment must be designed, configured, and maintained to meet these standards throughout the lifecycle of the contract, with no exceptions or deviations permitted without explicit approval. This subcontract is issued by the Department of Defense through the Maritime Supply Chain organization, with performance required at Pearl Harbor, Hawaii, 96860-5033, and responses must be submitted by August 17, 2026. It falls under NAICS code 541512 for computer systems design services and is structured as a subcontract with no set-aside designation, meaning all eligible contractors may respond regardless of small business status or other classifications.

Computer Systems Design Services

POSTED

about 10 hours ago

DEADLINE

Radioactive Materials Notification and LabelingThe contract requires identification, testing, and labeling of components that contain radioactive materials exceeding Department of Defense thresholds as defined by DFARS requirements. This subcontract mandates strict compliance with federal regulations to ensure all affected parts are accurately detected, analyzed, and properly marked to meet safety and accountability standards. The work must be performed in accordance with established procedural guidelines to prevent contamination and ensure readiness for military use. Performance is directed to Pearl Harbor, Hawaii, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. The North American Industry Classification System code is 541620, indicating the scope aligns with scientific and technical consulting services, specifically related to nuclear material handling. The contracting activity operates under the Department of Defense’s Maritime Supply Chain, emphasizing the critical nature of this task within naval and maritime logistics. Contractors must be fully prepared to meet regulatory, technical, and timeline obligations without deviation.

Environmental Consulting Services

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Labeling and ComplianceThe contract requires the provision of hazard warning labels and Material Safety Data Sheets (MSDS) for equipment delivered under the terms of the agreement, ensuring full compliance with both OSHA and Department of Defense standards. All labeling and documentation must accurately reflect the chemical and physical hazards associated with the materials involved, meeting federal safety and regulatory requirements for workplace and military use. The work is to be performed in support of operations at Pearl Harbor, with delivery and compliance obligations tied directly to the equipment supplied under this subcontract. This subcontract is posted under NAICS code 541620, indicating it relates to management, scientific, and technical consulting services, particularly in safety and regulatory compliance. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is managed by the Maritime Supply Chain division of the Department of Defense. There is no specified set-aside designation, and the contract does not include a designated point of contact beyond the official DIBBS portal link for further details and submission.

Environmental Consulting Services

POSTED

about 10 hours ago

DEADLINE

Power Conditioner Unit SupplyA military-grade power conditioner unit is being procured for deployment at the Pearl Harbor Naval Shipyard, with the contract issued under the Department of Defense through the Maritime Supply Chain office. The requirement is classified as a subcontract with NAICS code 335313, indicating it pertains to the manufacturing of other electrical equipment and components, specifically tailored for demanding shipboard or industrial environments where stable, clean power is critical. The solicitation was posted on August 5, 2026, and responses must be submitted by August 17, 2026, with performance expected to occur at the specified location in Pearl Harbor, Hawaii, zip code 96860-5033. The unit must meet stringent military standards for reliability, surge protection, and electromagnetic compatibility to support essential naval operations and infrastructure.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 10 hours ago

DEADLINE