Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hazardous Materials Labeling & Compliance Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541690
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # C2305
The Elsinore Valley Municipal Water District (EVMWD) is soliciting proposals for the Corydon Well Replacement Project, which involves the professional design, bidding support, and engineering services required to replace and abandon the existing Corydon well in Wildomar, California. The project is divided into two primary phases: Phase 1 focuses on civil site design, technical specifications, and construction management for the drilling of the new well and abandonment of the old one; Phase 2 covers the architectural, civil, mechanical, structural, electrical, and instrumentation design for equipping, testing, and commissioning the new groundwater production well. The project is funded through District funds and a Department of the Interior Bureau of Reclamation WaterSMART Planning and Project Design Grant, necessitating compliance with federal requirements, including the Build America Act, Buy America Preference, and the use of the Automated Standard Application for Payments (ASAP) system. TKE Engineering, Inc. is seeking qualified DBE, MBE, and WBE firms specializing in hydrology/hydraulic consulting, structural and electrical engineering, geotechnical investigation, and utility potholing. Proposals are due by 10:00 a.m. on September 1, 2026, via the PlanetBids Vendor Portal. Selection is based on demonstrated competence and professional qualifications, with evaluation weighted toward relevant experience (25%), project approach (25%), and scope/schedule (20%), while cost and innovation each account for 10%. The total estimated project cost is 2,260,788 dollars, though the final contract will be a negotiated not-to-exceed dollar limit. Awardees must adhere to strict federal and state regulations, including whistleblower protections, drug-free workplace standards, and specific insurance and bonding requirements for contracts exceeding the simplified acquisition threshold.
TKE Engineering, Inc.

POSTED

about 6 hours ago

DEADLINE

in 11 days
NAICS: 541690
New
SLED
Call 021 B3CBA2602572-0
Solicitation # B3CBA2602572-0
The contract, identified as Call 021 B3CBA2602572-0 issued by the Georgia Department of Transportation (GADOT), seeks the installation and integration of Intelligent Transportation Systems (ITS) devices and network infrastructure in Hall, Georgia. The scope encompasses the deployment of network switches, field cabinets, fiber optic transmitters and receivers, serial data terminal servers, security locks, UPS and battery systems, and solar power components, all to be installed in new or existing rack spaces per manufacturer specifications. Equipment must be new, sourced from a single manufacturer using identical models and firmware, and comply with ISO 9001 or Six Sigma quality standards. Delivery requirements mandate protective packaging with detailed labeling including manufacturer name, model, serial numbers, and project number, while specific materials like reinforcement steel and thermoplastic marking must adhere to strict handling and storage protocols. All items must be delivered with shipping and handling costs included in the base bid. Contractors are required to submit a Project Management Plan within 14 days of the Notice to Proceed or 30 days before installation, along with an Installation Plan containing schematic drawings, a Test Plan and Schedule, and comprehensive operations, maintenance, and user manuals for all ITS devices. Compliance is tracked through a specification compliance matrix that must clearly indicate adherence to each requirement with the word “Comply.” The contractor assumes full responsibility for equipment prior to installation and final acceptance, and must ensure all systems undergo a successful burn-in test before final inspection and close-out, which includes demonstrating full system operation, verifying traffic control device configuration, completing punch list items, restoring field conditions, submitting final as-built plans, delivering spare parts, completing training, and transferring all warranties. Final acceptance is contingent on receipt of all warranties. Legal obligations include compliance with the Georgia Security and Immigration Compliance Act Affidavit, a Drug-Free Workplace certification, and ADA Title II accessibility requirements. Proposals must be submitted as a single PDF to the Construction Manager by email, and bidders must obtain eligibility to bid by submitting required forms no later than noon the day before the letting, with failure to do so resulting in disqualification. The contract is categorized under NAICS 541690 and governed entirely by GDOT Standard Specifications, including provisions for prosecution, suspension, default, claims for adjustments, and maintenance, with the Department retaining sole authority to accept or reject equipment and take emergency action if warranted.
GADOT

POSTED

about 9 hours ago

DEADLINE

in 6 minutes

AI Contract Overview

Show more

The contract is for hazardous materials labeling and compliance services, requiring the preparation of hazard warning labels that meet OSHA HAZCOM and MIL-STD-129 standards, with all pre-award submissions to be delivered to the government. The work must ensure full regulatory alignment for labeling hazardous materials used in defense supply chains, including accurate hazard communication, proper formatting, and adherence to military specification requirements. The opportunity is set aside exclusively for Women-Owned Small Businesses, classified under NAICS code 541690, and is structured as a subcontract. Performance of the work is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, with no specific point of contact listed. The contract opportunity is accessible through the DIBBS portal for qualified WOSB vendors to submit proposals.

General Info

WOSB subcontract for hazardous labels per OSHA and MIL-STD-129 in New Cumberland, PA, due July 27, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

WOSB

Documents

This scope was carved out of SPE7M1-26-T-214W.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VOLTMETER

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Preparation of hazard warning labels for hazardous materials in compliance with OSHA HAZCOM and MIL-STD-129, including pre-award submissions to the government.

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334416
New
DIBBS
TRANSFORMER, AUDIO FREQ
Solicitation # SPE7M1-26-U-5010
Solicitation SPE7M1-26-U-5010 is an Indefinite Delivery Contract issued by the Department of Defense Maritime Supply Chain for the procurement of audio frequency transformers (NSN 5950-01-182-2518). The contract has an estimated annual quantity of 73 units, with a guaranteed minimum of 10 units and a maximum contract value of 350,000 dollars. Delivery is required within 88 days after receipt of order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The item is classified as a commercial critical application item, with approved part numbers from Automation Products Group, Inc., Lockheed Martin Corporation, and Inrcore, LLC. Strict quality and packaging standards apply, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the fragile nature of the transformer terminals, items must be marked Handle With Care and Delicate Instrument. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements mandate the use of Wide Area WorkFlow for electronic invoicing and adherence to various FAR and DFARS clauses regarding cybersecurity, hazardous material identification, and the prohibition of covered defense telecommunications equipment.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 335931
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M1-26-U-4967
Solicitation SPE7M1-26-U-4967 is an Indefinite Delivery Contract issued by the Department of Defense Maritime Supply Chain for the procurement of sensitive switches, identified by NSN 5930-00-538-6834. The requirement is for an estimated quantity of 42 units, with a contract ceiling of 350,000 dollars. This is a Total Small Business Set-Aside under NAICS code 335931. The items are classified as critical application components and must align with specific part numbers from manufacturers such as Honeywell, Hensoldt, BAE Systems, and Northrop Grumman. Delivery is required within 140 days after receipt of order on an FOB Origin basis, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally essential and contained per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including specific cleaning and drying preservation methods. Administrative requirements include mandatory electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses regarding small business representations, cybersecurity standards such as NIST SP 800-171, and hazardous material labeling. Proposals must be submitted electronically via the DIBBS portal by August 19, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details