Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Logistics & Compliance Management

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive logistics management for hazardous materials, ensuring full compliance with OSHA HAZCOM, DOT, and DFARS regulations throughout transportation, labeling, and documentation processes. All activities must be executed in alignment with federal safety and defense procurement standards, with performance centered at the New Cumberland location, ZIP 17070-5002. The work is structured as a subcontract under NAICS code 488410, and must be responsive to the Department of Defense through the DDSP New Cumberland Facility, with proposals due by August 14, 2026. Strict adherence to regulatory frameworks is mandatory to ensure safe handling, proper identification, and accurate recordkeeping for hazardous substances in support of defense operations.

General Info

Hazardous materials logistics at New Cumberland, ZIP 17070-5002, compliant with OSHA, DOT, DFARS, due Aug 14, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

488410 - Motor Vehicle TowingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manage transportation, labeling, and documentation of hazardous materials in compliance with OSHA HAZCOM, DOT, and DFARS requirements.

Similar Contracts

Same NAICS industry code

Packaging, Marking, and Labeling (MIL-STD-129 Compliance)

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Material Handling Equipment (MHE) Operations

0410 Aq Hq Contract

POSTED

DEADLINE

CHP Napa Area office - Evidence Impound Tow and Storage Services - IFB #26C325001

Solicitation # 0000039922

The State of California California Highway Patrol (CHP) Napa Area Office is seeking qualified vendors to provide evidence impound tow and storage services under Invitation for Bids #26C325001, with a closing date of August 13, 2026, at 11:00 PM. The solicitation requires bidders to transport, store, and manage impounded vehicles, including both commercial and private vehicles, as part of law enforcement evidence collection and retention procedures. The place of performance is specified as West Sacramento, California, with a ZIP code of 95605, and all services must be delivered in strict compliance with CHP protocols and guidelines. Bidders must adhere fully to the submission instructions, though the DVBE participation requirement has been waived for this solicitation. All communications and inquiries regarding the bid should be directed to Cameron MacGregor at the CHP, via phone at 916-843-3600 or email at cameron.macgregor@chp.ca.gov. The bid response deadline is set for August 14, 2026, at 6:00 AM, and proposers are advised to ensure their submissions align with the official solicitation document. While the contract is posted on Biddingo.com for informational purposes, vendors are required to refer to the originating agency’s official channels for accurate bid details, registration requirements, and submission procedures. Participation may necessitate registration on the State of California’s procurement portal, and bidders assume responsibility for verifying all terms, conditions, and compliance requirements independently.

State of California

POSTED

DEADLINE

Logistics & Transportation Provider (Sea & Domestic)The contract seeks a logistics and transportation provider to handle the sea and domestic movement of medical supplies under strict adherence to DLA shipping standards and MIL-STD-129 marking requirements, ensuring full compliance with federal packaging, labeling, and documentation protocols. The scope includes the handling of hazardous materials where applicable, requiring specialized expertise in safety, storage, and transport procedures aligned with military regulations. Performance is primarily focused at Beale Air Force Base, California, with zip code 95903-1908, though transport may extend to other locations as needed to support medical supply chain operations. This is a subcontract opportunity under NAICS code 488410, posted on August 3, 2026, with responses due by August 10, 2026. The contracting activity is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF organization, indicating direct support to defense medical logistics. All bidders must be prepared to meet rigorous compliance benchmarks for shipping documentation, container marking, hazardous material handling, and delivery timelines to ensure uninterrupted medical supply availability. No set-aside information is specified, so all eligible entities may respond through the DIBBS platform using solicitation number SPE2DS26T301E.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Government Logistics & Packaging SpecialistThe contract requires comprehensive packaging, marking, and shipment preparation services strictly aligned with MIL-STD-2073-1E and MIL-STD-129 standards to support military logistics operations. All work must ensure that items are properly protected, labeled, and documented for seamless transit through the Department of Defense supply chain, meeting rigorous federal specifications for durability, traceability, and uniformity. The services are critical to enabling efficient movement of defense-related equipment and supplies under controlled military protocols. This subcontract opportunity, issued under NAICS code 488410 by the Maritime Supply Chain division of the Department of Defense, is open for bidding with a response deadline of August 14, 2026. The solicitation was posted on August 3, 2026, and the place of performance is not explicitly defined, indicating potential flexibility in location as long as delivery requirements are met. Bidders must demonstrate expertise in military-grade packaging systems and compliance with DoD standards, with all submissions submitted through the DIBBS platform using the provided solicitation link.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Final Assembly, Inspection, and Delivery CoordinationThe contract involves the final integration of tanks and trailers, requiring on-site inspection, testing, and coordination to ensure timely delivery to the Sacramento metro area by October 1, 2026. All work must be completed in compliance with technical and operational standards, with a focus on quality control and seamless logistics planning to meet the deadline. The performance location is within the Sacramento region, and the contractor must manage all aspects of assembly, verification, and transportation without delays. This is a Small Business Set Aside subcontract under NAICS code 488410, issued by the Department of the Interior through It Goods Fws. The solicitation was posted on August 3, 2026, with a response deadline of August 12, 2026, limiting eligibility to small businesses as defined by the SBA. There is no specified place of performance beyond the Sacramento metro area, and no point of contact is provided within the data. The contract type implies a subcontracting arrangement, and all parties must adhere to federal small business procurement guidelines throughout execution.

POSTED

DEADLINE

International Logistics and FOB Destination Delivery to Sasebo, JapanThe contract involves end-to-end logistics coordination for the delivery of four 40-foot containers to the USN SRF-JRMC Sasebo Akasaki Container Yard in Japan, covering all aspects of transportation and compliance. This includes inland transport to the port of export, preparation and submission of export documentation, ocean freight handling if required, Japanese customs clearance, and final delivery to the designated yard under FOB Destination terms, meaning the seller bears all costs and risks until the goods reach the specified destination in Sasebo. The scope ensures seamless movement of cargo from origin to the final military facility with full regulatory adherence. The solicitation is classified as a subcontract under NAICS code 488410 for support activities for water transportation and is issued by the Naval Supply Systems Command Fleet Logistics Center Yokosuka on behalf of the Department of Defense. The opportunity was posted on August 3, 2026, with a response deadline set for August 18, 2026, and performance is required at the Akasaki Container Yard in Sasebo, Japan. The contract requires a logistics provider with proven capability in international military shipments, familiarity with U.S. and Japanese customs protocols, and the ability to manage complex multimodal transport under strict timelines and security requirements.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Packaging, Marking & MIL-STD-129 ComplianceThe contract requires strict adherence to ASTM D3951 for packaging standards and MIL-STD-129 for marking and labeling requirements on all military shipments, ensuring compliance at both the unit and pallet levels. All packaging must be designed and executed to meet the rigorous durability, protection, and identification criteria mandated by these specifications to support secure and efficient logistics within Department of Defense supply chains. Failure to comply with either standard could result in rejection of shipment and contract nonperformance. This subcontract is issued under NAICS code 488410 for logistics support services and is tied to the Maritime Supply Chain organization under the Department of Defense. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was published on August 2, 2026, and responses must be submitted by August 13, 2026. All work must be completed in alignment with federal military logistics protocols, and bidders must ensure full understanding of labeling formats, barcoding systems, and packaging materials as defined by the referenced standards.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Logistics and Transportation ProviderThe contract requires a hazardous materials logistics and transportation provider to securely move mercury-containing devices using U.S.-flagged vessels in full compliance with military HAZMAT shipping standards. All shipments must employ traceable and secure methods to ensure accountability and safety throughout transit, with delivery finalized at an FOB destination. The work is classified as a subcontract under NAICS code 488410, indicating it pertains to support activities for water transportation. Performance is designated to occur at FPO with a zip code of 34093, and the solicitation is issued by the ASC Commodities Division within the Department of Defense. Interested vendors must submit responses by the deadline of August 10, 2026, following the procedures outlined on the DIBBS portal link provided.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Domestic and International Transportation & DeliveryThe contract facilitates the logistics coordination and transportation of two boxes of epoxy primer coating from their origin to two distinct destinations: APO AP 96278-2069 via parcel post and OSAN AB in South Korea via freight services. The terms specify FOB DESTINATION, meaning the seller assumes all transportation costs and risks until the goods are delivered to the specified endpoints. This arrangement ensures that responsibility for delivery, including any potential delays or damages during transit, rests with the transporter until final receipt at both locations. The work falls under NAICS code 488410, which pertains to support activities for air transportation, indicating specialized handling and coordination are required for air-transported military logistics. The contract is issued under the Defense Logistics Agency, a branch of the Department of Defense, underscoring the critical nature of the shipment in supporting operational needs. The solicitation is classified as a subcontract with no set-aside provisions, and the posting date of August 2, 2026, reflects future execution, suggesting planning and preparation are ongoing for imminent deployment requirements.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires comprehensive preparation, packaging, and labeling of defense-related hazardous materials in strict adherence to MIL-STD-129 and OSHA HAZCOM standards, ensuring all regulatory and safety requirements are met for military logistics and transportation. The work must be performed in alignment with federal specifications governing the handling of dangerous goods, with particular emphasis on accurate documentation, standardized labeling, and secure packaging that meets Department of Defense operational needs. This subcontract is issued under NAICS code 488410 for Other Support Activities for Transportation and has a response deadline of August 13, 2026, with the solicitation posted on August 2, 2026. Performance is designated for FPO, zip code 96657, indicating operations may occur on military installations or vessels with limited specific geographic location. The contract is managed by the Department of Defense through its Construction & Equipment MRO SVC I office, and bidders must respond via the designated DIBBS platform, ensuring timely compliance with procedural and technical obligations to fulfill the defense supply chain’s hazardous materials handling requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Defense Logistics Shipment & Barcoding ServicesThe contract entails the packaging, barcoding, and shipment of armor units in strict compliance with MIL-STD-129 standards to ensure accurate military logistics tracking and seamless acceptance at the destination. All activities must adhere to Department of Defense protocols for labeling, documentation, and transport readiness, with the place of performance specified as NORTH KINGSTOWN, 02852-7538. The work is classified as a subcontract under NAICS code 488410, which pertains to support activities for air transportation, indicating a logistics-focused scope involving specialized handling and coordination. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Successful bidders must deliver fully compliant packaging and labeling to enable automated tracking throughout the military supply chain and ensure timely, error-free receipt by the end user.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

HEATING UNIT, INFRAR

Solicitation # SPE8E5-26-T-3844

The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.

Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

FILTER, AIR, ELECTROS

Solicitation # SPE8E8-26-T-5042

The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3780

The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E6-26-T-4066

This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.

POSTED

about 2 hours ago

DEADLINE

IMPELLER, FAN, AXIAL

Solicitation # SPE8E7-26-T-3511

The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

CORROSION PREVENTIVE C

Solicitation # SPE8ES-26-T-2509

This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.

Wood Preservation

POSTED

about 2 hours ago

DEADLINE

CASE, STORAGE AND TR

Solicitation # SPE8E6-26-T-4056

The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.

Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE8ES-26-T-2502

The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.

Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

RAMP ASSY CORNER RH

Solicitation # SPE8E5-26-T-3818

This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.

Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

LIGHT, COCKPIT, AIRCRAFT

Solicitation # SPE8E7-26-T-3487

This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

SHEETING, REFLECTIVE

Solicitation # SPE8E5-26-T-3781

Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

SPECTRAL SELECTIVE COA

Solicitation # SPE8ES-26-T-2504

The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.

Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE