Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HEATING UNIT, INFRAR

Active
SPE8E5-26-T-3844Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.

General Info

Four infrared heating units procured by DoD for small business, delivery in 167 days, New Cumberland, PA.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE8E5-26-T-3844.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Ira Hedgepeth
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEATING UNIT,INFRAR
HEATING UNIT,INFRAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
"WHEN THE PURCHASE ORDER TEXT (POT) DESCRIBES THE REQUIRED PRODUCT(S) BY
NAME AND PART NUMBER OF A SPECIFIC ENTITY, BY THE NAMES AND PART NUMBERS
OF A NUMBER OF SPECIFIC ENTITIES, OR BY THE NAME(S) AND PART NUMBER(S)
OF SPECIFIC ENTITY/ENTITIES AS MODIFIED BY ADDITIONAL REQUIREMENTS SET
FORTH IN THE POT, ONLY THAT/THOSE PRODUCT(S) HAVE BEEN DETERMINED TO
MEET THE NEEDS OF THE GOVERNMENT AND ARE ACCEPTABLE. SUCH PRODUCT(S) ARE
""EXACT PRODUCT(S)"" AS DEFINED IN ""DLAD 52.217-9002, CONDITIONS FOR NSN/Part Number: 3439-01-436-9799 Quantity: 4 EA Purchase Request: 7017758092QTY: 4 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332216
New
DIBBS
SOLDERING IRON, ELEC
Solicitation # SPE8E9-26-T-3314
The contract is for the procurement of 46 electric soldering irons with a part number of 3439-00-965-0090, specified as 200 watts with shape B tips, requiring two tips per unit. The item is not classified as hazardous and does not require a Safety Data Sheet, though the hazardous item indicator must remain unchanged. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents authorized by NAVSEA. Any portable devices containing mercury must be shock-proof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging, identification, and marking of non-accepted supplies must comply with DLA standards including removal of government identification and physical marking requirements. The solicitation number is SPE8E9-26-T-3314, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332216 for federal procurement administered by the Department of Defense’s Construction & Equipment MRO Service I. Deliveries are due within 167 days of award, and the place of performance is New Cumberland, PA, with Matthew Kruc listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING STATION
Solicitation # SPE8E6-26-T-4037
The contract is for the procurement of 30 soldering stations with NSN 3439-01-576-6864 and part number 8007-0528, issued by DLA District San Joaquin under solicitation SPE8E6-26-T-4037. Each unit must feature an analog dial control with Celsius/Fahrenheit display and temperature lockout functionality, and must comply with DLA packaging requirements and MIL-STD-2073-1E for preparation and packaging. The items must be shipped FOB origin with delivery due in 61 days, and inspection and acceptance occur at the destination. Packaging must adhere to MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA guidelines. The contract prohibits intentional addition of mercury or mercury-containing compounds to the equipment except for specific exemptions such as batteries, fluorescent lights, sensors, or instruments as defined by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The delivery address is W62G2T, W1A8 DLA DIST SAN JOAQUIN, Tracy, CA 95304-5000, with the original required delivery date set for November 18, 2026, and a need ship date of April 8, 2026. The unit price is $30.00, totaling $900.00 for the order, with zero variance allowed in quantity. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue date or award date. The contract also references hazardous materials packaging rules and transportation procedures outlined in DLAD Proc Notes C19 and C20.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
CORD, ELECTRICAL
Solicitation # SPE7M0-26-T-031J
The contract specifies the procurement of a single electrical cord with NSN/Part Number 6145-01-695-6822, requiring delivery within five days of award. The solicitation is issued under SPE7M0-26-T-031J with a response deadline of August 17, 2026, and was posted on August 5, 2026. This is a federal procurement under the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at Camp Lejeune, North Carolina, 28542-0088. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA packaging requirements, and if the advice code is 2N, 28, or 34, the cord must be supplied in continuous length with no multiple unit packs; if 2P or 39, continuous length with multiple unit packs is acceptable, with the advice code superseding any conflicting schedule data. Any configuration changes require an engineering change proposal or variance request, and non-accepted supplies must have government identification removed. The alternate offeror must submit a complete data package including details for both the approved and alternate part. Primary point of contact is Abaigael Masterson at abaigael.masterson@dla.mil or 614-693-2532.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
TIP, SUCTION DEVICE,
Solicitation # SPE8E5-26-T-3810
This contract pertains to the procurement of 47 units of a suction device tip, identified by NSN 3439-01-399-4904 and part number 1121-0417-P1, under solicitation SPE8E5-26-T-3810. The item must be new and unused, packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking requirements, and delivered FOB origin with no quantity variance permitted. Delivery is required within 167 days from the contract date, with inspection and acceptance occurring at the destination point, specifically DLA Distribution San Diego. The contractor must adhere to DLA’s packaging standards, including the use of approved unit containers and palletization protocols, and all shipments must comply with hazardous materials handling procedures outlined in IP025. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances in sampled lots unless otherwise directed, with critical, major, and minor attributes assigned verification levels of VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the product except for functional uses in batteries, fluorescent instruments, sensors, controls, weapon systems, or specified chemical reagents per NAVSEA guidelines; portable devices containing mercury must include a secondary containment barrier. Technical and quality requirements are referenced from the DLA Master List, and the contract incorporates applicable defense standards for documentation and sampling methods. The delivery deadline is set for February 1, 2027, with an original required delivery date of November 24, 2026, and all communications and inquiries should be directed to the primary point of contact, Brandon Wicker.
SAN DIEGO

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
TOOL SET BRIDGE REM
Solicitation # SPE8E5-26-T-3820
This contract pertains to the procurement of a single unit of a tool set designated by NSN 5210015831759 under solicitation SPE8E5-26-T-3820, with a required delivery in 167 days from the contract award, targeting an original delivery date of April 9, 2027. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific directives for Item Unique Identification (IUID) aligned with MIL-STD-130 and the DFARS 252.211-7003 clause. Packaging and labeling must adhere to MIL-STD-129 and ASTM D3951, with palletization governed by DLA Packaging Requirements, and all government identification must be removed from non-accepted supplies as per RQ011. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance is permitted in quantity. The sole unit is to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation procedures defined by DLAD Proc Notes C19 and C20. The contract includes specific data elements such as the purchase request number, unit price, and delivery timeline, with the seller required to meet the mandatory ship date of February 1, 2027. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the item falls under NAICS code 332216 for federal acquisition by the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
INDICATOR, DIAL
Solicitation # SPE8E5-26-T-3846
The contract is for the procurement of three Indicator, Dial units with NSN 5210016581122 and part number 599-7040 from HEXAGON MANUFACTURING INTELLIGENCE, LLC, under solicitation SPE8E5-26-T-3846. The unit price is $3.00 per unit, totaling $9.00, with delivery required within 167 days from the award date, FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at the destination, with all items subject to DLA’s Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with DLA’s RP001 and MIL-STD-129, with palletization following DLA-specific guidelines, and all labeling and markings must be in accordance with these directives. The items are designated as a Critical Application Item and may be subject to Covered Defense Information requirements. Delivery must be made to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and an original delivery deadline of March 26, 2027. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the Unit of Issue conforms to DoD standards as referenced in the official DLA unit of issue document.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
TIP, ELECTRIC SOLDERING
Solicitation # SPE8E6-26-T-4017
The contract is for the procurement of 112 units of a tip for an electric soldering iron, identified by NSN 3439-01-376-8025 and part number 1121-0305-P1 from PACE, INCORPORATED. Delivery is required within 63 days of award, with a specified ship date of August 5, 2026, and an original required delivery date of January 10, 2027. The items must be delivered FOB origin with zero variance in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special codes, and palletization as specified. Hazardous materials provisions apply, strictly prohibiting the intentional addition of mercury or mercury-containing compounds to the product, with limited exceptions for batteries, fluorescent lights, sensors, weapon systems, and chemical reagents specified by NAVSEA; portable devices containing mercury must be shockproof and have a secondary containment boundary per NAVSEA 5100-003D. The item is classified as critical per FLIS, and the contract incorporates all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The delivery address is DLA Distribution San Diego, and transportation follows DLAD Proc Note C19 and C20. The contract is issued under solicitation SPE8E6-26-T-4017, with a response deadline of August 17, 2026, and is managed by the Department of Defense through an authorized unit of issue.
SAN DIEGO

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
FILE, ROTARY
Solicitation # SPE8E5-26-T-3793
The contract pertains to the procurement of cylindrical tungsten carbide rotary files with medium cut teeth, specified at 23 to 28 teeth per circumference, featuring a 0.250 inch shank diameter, a 0.500 inch cut head diameter, a 1.00 inch cut head length, and an overall length of 2.750 inches. These items must fully comply with the military specification A-A-51146C, including all requirements outlined in Tables II and III, and conform to TDP Revision A Gen 1. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s packaging guidelines. The material is identified by NSN 3455-01-009-2858, with a purchase request number 7017758420 and a unit of issue of each. The contract calls for a quantity of 945 units at a unit price of $945.00, totaling $892,725.00, with no variance allowed in quantity. Delivery is required FOB origin within 67 days of the contract award, with the destination being the DLA Distribution San Joaquin facility at 25600 S Chrismann Road, Tracy, CA 95304-5000. Inspection and acceptance occur at the destination point. The original required delivery date is December 12, 2026, though the needed ship date is July 1, 2026. Transportation instructions follow DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3793, issued under a federal procurement with NAICS code 332216. The contracting office is the Department of Defense, DLA Distribution San Joaquin. The point of contact for inquiries is Don Trachtman, reachable via phone and email. The document was posted August 5, 2026, with a response deadline of August 17, 2026. All packaging, labeling, and handling must comply with federal and DLA standards, and government identification must be
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
FIXTURE, CALIBRATION
Solicitation # SPE8E5-26-T-3805
The contract pertains to a calibration fixture identified by part number 152D5256 and NSN 5220-01-289-6319, with a requirement for four units, each to be delivered as a single unit (EA). The supplier, GENERAL DYNAMICS-OTS, INC. with CAGE code 05606, must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA web portal, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The product is deemed an exact match as specified in the purchase order text, with no approved substitutions permitted. Delivery is required within 167 days after contract award, with the place of performance located at New Cumberland, Pennsylvania, zip 17070-5002. The solicitation, issued under number SPE8E5-26-T-3805, was posted on August 5, 2026, with responses due by August 17, 2026, and falls under NAICS code 332216 for industrial machinery manufacturing. Point of contact for inquiries is Khue Nguyen of the DDSP New Cumberland Facility, reachable via phone or email provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELECTRI
Solicitation # SPE8E6-26-T-4019
The contract is for the procurement of 37 electric soldering irons under NSN 3439-01-354-3448 and part number 7013-0004-02-P1, sourced from PACE, INCORPORATED, with a unit price of $37.00 and a total contract value of $1,369.00. Delivery is required within 167 days from the original required delivery date of January 21, 2027, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application item and must meet stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Inspection and acceptance occur at the destination, with packaging mandated to comply with MIL-STD-2073-1E, ASTM-D-3951-98, and MIL-STD-129 for marking and labeling, while palletization must adhere to MIL-STD-147. The packaging must also conform to DLA’s specific procurement guidelines and include hazardous material handling provisions as defined by IP025. All items must be shipped to the DDSP New Cumberland Facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with transportation governed by DLAD Procurement Notes C19 and C20. The solicitation number is SPE8E6-26-T-4019, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332216. Covered Defense Information may apply, and the removal of government identification from non-accepted supplies is required. The contract is managed by Brett Scull of the Department of Defense, with the primary point of contact information provided. The unit of issue is each (EA), and the contract includes no special marking codes or additional handling requirements beyond those explicitly defined in the referenced military and commercial standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
WIRE, NONELECTRICAL
Solicitation # SPE8E4-26-T-1966
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
PULLER, MECHANICAL
Solicitation # SPE4A6-26-T-12FR
The contract pertains to the procurement of six mechanical pullers identified by NSN 5120-15-151-5848 and part number 99366858 from IVECO DEFENCE VEHICLES S.P.A., with a unit price of $6.00 per unit and a total contract value of $36.00. Delivery is required within 171 days from the award date, with shipment to be made FOB origin in accordance with strict packaging standards: all items must be packaged per ASTM D3951, labeled and marked per MIL-STD-129, and palletized according to DLA Packaging Requirements for Procurement, with DLA’s Master List of Technical and Quality Requirements taking precedence over any standard. Sampling and inspection must conform to MIL-STD-1916 or ASQ H1331 Table 1 using zero defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance both occur at destination, with no variance permitted in quantity—exact delivery of six units is mandatory. The delivery point is the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of January 31, 2027, and an original delivery deadline of March 26, 2027. All technical and quality standards referenced are governed by the DLA Master List, and compliance with transportation protocols under DLAD Proc Notes C19 and C20 is required. The contract was issued under solicitation SPE4A6-26-T-12FR, with response deadlines and award details managed by the ASC Commodities Division of the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336411
New
DIBBS
LIGHT SET, GENERAL I
Solicitation # SPE8E7-26-T-3512
This contract, identified as SPE8E7-26-T-3512, is a total small business set-aside for the procurement of 62 units of LIGHT SET, GENERAL ILLUMINATION with NSN 6230-01-596-4722 and part number 31-ISL-BB, at a unit price of $62.00, totaling $3,844.00. Delivery is required FOB origin within 117 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must strictly adhere to DLA’s packaging requirements RP001 and MIL-STD-129 for labeling and marking, with commercial packaging compliant to ASTM D3951 unless the item is classified as hazardous under FED-STD-313, in which case TQ requirement IP025 governs. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The unit of issue is each, with quantity per unit pack specified as 001, and palletization must follow DLA guidelines. The contract mandates delivery to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with parcel post and freight shipping addresses identical. Transportation must comply with DLAD Proc Notes C19 and C20. The original required delivery date is March 17, 2027, but a need ship date of August 6, 2026, indicates an earlier anticipated shipment timeline. The solicitation was issued on August 5, 2026, with responses due by August 17, 2026, under a Small Business Administration set-aside for NAICS code 336411. Primary point of contact is Kelly Mitchell, reachable via email and phone, and all contractual obligations must align with the applicable revision of the DLA Master List as of the solicitation issue date. The contract is issued under the DoD’s authorized unit of issue framework and includes provisions for the removal of government identification from non-accepted supplies, with covered defense information potentially applying.
Aircraft Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details