Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Packaging and Labeling for Government Shipment

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the proper packaging, marking, and labeling of gasket forming compound with NSN 8030016063451 in full compliance with OSHA Hazard Communication standards and MIL-STD-129 military shipping regulations. This includes the pre-award submission of hazard warning labels to ensure all safety and identification requirements are met before shipment. The work is classified under NAICS code 562910, indicating it falls under waste management and remediation services, though the specific task involves hazardous materials handling for government logistics. The contract is issued as a subcontract under the Defense Logistics Agency of the Department of Defense, with performance expected to adhere strictly to federal defense transport protocols. The solicitation is publicly accessible via the DIBBS portal with contract number SPE8ES26V0232, and while no place of performance or point of contact is specified, compliance with all federal hazardous materials handling and labeling norms is mandatory.

General Info

Pack, mark, label gasket compound per OSHA and MIL-STD-129 for DLA under subcontract SPE8ES26V0232.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8ES-26-T-1280.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GASKET FORMING COMP

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 3

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Package, mark, and label gasket forming compound (NSN: 8030016063451) in compliance with OSHA HAZCOM and MIL-STD-129 standards, including pre-award submission of hazard warning labels.

Similar Contracts

Same NAICS industry code

Construction of Monitoring Well AR-MW-04 for IEUA at 1158 Reservoir Site Rancho Cucamonga, CA. Project NO. EN25022.05

Solicitation # construction-monitoring-well-ar-mw-04-ieua-1158-reservoir-site-rancho-cucamonga-ca-project-no

Yellow Jacket Drilling Services, LLC is seeking subcontractors for the construction of monitoring well AR-MW-04 for IEUA at the 1158 Reservoir Site in Rancho Cucamonga, California. This project, identified as Project NO. EN25022.05, requires specialized services including cement pumping, waste disposal, sound wall installation, traffic control, geophysical logging, land surveying, and conductor casing installation. The solicitation was posted on September 11, 2026, with a response deadline of September 17, 2026. Interested parties can contact Dean Coblish for further details regarding this opportunity.

Yellow Jacket Drilling Services, LLC

POSTED

about 3 hours ago

DEADLINE

Asbestos Hazard Remediation and Certification

California Department of General Services

POSTED

about 15 hours ago

DEADLINE

Lead Hazard Reduction & Healthy Homes Intervention 21 High Street, Waterbury, CT

Solicitation # 8937

The City of Waterbury is seeking sealed bids for a Lead Hazard Reduction and Healthy Homes Intervention project located at 21 High Street, Waterbury, CT. This Invitation to Bid, identified as number 8937, requires interested parties to submit their proposals to the Office of the Director of Purchasing at City Hall by 10:30 AM on September 29, 2026. A critical requirement for eligibility is attendance at a mandatory pre-bid conference and information session held at the project site on September 21, 2026, at 10:00 AM. The deadline for submitting any clarifications regarding the bid is September 23, 2026, at 2:00 PM. All inquiries and coordination should be directed to the primary contact, mmccauley@waterburyct.org.

City of Waterbury

POSTED

about 17 hours ago

DEADLINE

Tex Canyon Stock Tank Sediment Removal

Region 3 Southwestern Regional Office

POSTED

about 19 hours ago

DEADLINE

Fiscal Year (FY) 2027 Florida Panhandle Optimized Remediation Contract (ORC) and Military Munitions Response Program (MMRP)

Solicitation # W9127827RA002

The Florida Panhandle Optimized Remediation Contract (ORC) and Military Munitions Response Program (MMRP), solicitation number W9127827RA002, is a single-award, 10-year, firm fixed price contract issued by the U.S. Army Engineer District, Mobile. This small business set-aside project is estimated to be valued between 25 million and 100 million dollars and will be awarded using a Best Value Trade-Off process. The scope of work involves comprehensive, performance-based environmental remediation across 58 Installation Restoration Program sites and 5 Military Munitions Response Program sites located at Eglin Air Force Base, Hurlburt Field, and Tyndall Air Force Base in Florida. The contractor will be responsible for a wide range of services, including investigation design, the construction of remedial systems, operation and maintenance of established remedies, remedy optimization, and the achievement of site-specific performance objectives. Technical requirements include the use of a critical path method for network analysis. Prospective bidders must be registered in both the System for Award Management and the Procurement Integrated Enterprise Environment to access solicitation documents and submit electronic bid forms and bonds.

W074 Endist Mobile

POSTED

about 19 hours ago

DEADLINE

6923G226Q000028 Delano hall Tank

Solicitation # 6923delanotank

The Department of Transportation Maritime Administration is seeking a small business contractor to remove and scrap three steel underground No. 2 heating oil storage tanks located at Delano and O'Hara Hall for the USMMA in Kings Point, New York. This solicitation, identified as 6923G226Q000028, falls under NAICS code 562910 and is designated as a total small business set-aside. Interested parties must submit all proposal volumes and past performance questionnaires via email to the designated points of contact. Following an amendment, the final deadline for submissions is September 11, 2026, at 2:00 PM ET. All proposals and supporting documentation must be sent to Durba Ray and Brian Wiley to be considered for the award, which is scheduled to be finalized by September 2026.

693JF7 DOT Maritime Administration

POSTED

about 19 hours ago

DEADLINE

Truck Loading Biofilter Media Replacement at Plant No. 2 (FR2-0034)

Solicitation # S-2026-736BD

The Orange County Sanitation District (OC San) is soliciting bids under solicitation S-2026-736BD for a general services contract to replace fouled biofilter media within the Truck Loading Biofilter System at Plant No. 2. The project requires the contractor to provide all labor, equipment, and materials to procure Biorem-manufactured media, remove and dispose of 5,624 cubic feet of old media and mesh, clean the air distribution system, and coordinate installation and operator training. To maintain continuous odor control, no more than one biofilter cell may be removed from service at a time. The work must be completed within 84 calendar days from the Notice to Proceed, with all deliverables accepted by the OC San Project Manager. Eligible bidders must hold a California Contractor's License classification A and comply with California Department of Industrial Relations prevailing wage requirements and CARB mobile source regulations. Mandatory requirements include attendance at a pre-bid meeting on September 24, 2026, and submission of bids via the OpenGov portal by October 20, 2026. Bidders must provide proof of comprehensive insurance, including general liability of 2 million dollars per occurrence and 4 million dollars aggregate. Award will be granted to the lowest responsible and responsive bidder. All hazardous materials and waste must be labeled and stored with secondary containment in accordance with safety standards.

POSTED

DEADLINE

in about 1 month

Asbestos and Lead Abatement Contractor

City of Victorville

POSTED

DEADLINE

Hazmat Abatement

San Francisco Unified School District

POSTED

DEADLINE

Hazardous Waste Removal & Disposal

Planning and Development Department

POSTED

DEADLINE

in about 1 month

Asbestos Remediation and Abatement

Parkland Health and Hospital System

POSTED

DEADLINE

in about 1 month

473.00 Credits of Stream Mitigation- Iowa County

Solicitation # 645-DOTRFB-3070-2027

The Iowa Department of Transportation is soliciting competitive bids for the procurement of 473.00 credits of stream mitigation located in Iowa County under solicitation number 645-DOTRFB-3070-2027. The bidding period opens on September 10, 2026, and closes on October 1, 2026, at 1:00 PM CDT. To be considered for the award, bidders must bid on all 473.00 credits and certify their acceptance of six specific prerequisites. A public bid opening will be conducted via Microsoft Teams or phone on the closing date. The contract will be awarded to the responsible bidder whose submission is deemed most advantageous, with evaluation factors including cost, adherence to mandatory requirements, proposed staffing, the ability to meet the required time schedule, work capacity, and a comprehensive review of past performance. The procurement is governed by Iowa Administrative Code 761-20 and requires deliveries to be F.O.B. Destination. Payment terms are set at Net 60, and the primary point of contact for the agency is Mallory Hunter.

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 14 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 14 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, specifically NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). This is a restricted source item requiring government engineering source approval and is designated as a critical application item. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. The items are to be delivered to locations in Warrenton, Oregon, and Schofield Barracks, Hawaii. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Due to the nature of the supplies, the contractor must adhere to hazardous material identification and shipping standards, including IP025 and FAR 52.223-3, and provide a Material Safety Data Sheet. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to all solicitation requirements.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

This contract is a firm fixed price solicitation from the Defense Logistics Agency for one maintenance-free sealed lead-acid type I storage battery, part number APCRBC133 by Schneider Electric IT Corporation. The item has a non-extendable shelf life of 12 months and must be delivered within 60 days after order. Inspection and acceptance will occur at the origin, with shipping destined for the USS Harvey C Barnum Jr. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract includes hazardous material communications regarding mercury restrictions and specifies that the battery must meet nonspillable criteria under 49 CFR 173.159 to qualify for specific transportation exceptions across land, sea, and air.

POSTED

about 14 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of four decals, identified by NSN 7690-01-262-9486 and Boeing part number BACM9L10AVM. This is a Foreign Military Sales requirement for Greece, with delivery required within five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Inspection and acceptance will occur at the point of origin, and the final delivery destination is Mechanicsburg, Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including required shelf-life labels. Palletization must comply with RP001, and the use of plastics for wrapping or cushioning should be avoided where possible. Technical and quality requirements are governed by the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and the safeguarding of covered defense information. All quotes must be submitted via the DIBBS portal, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized.

Commercial Printing (except Screen and Books)

POSTED

about 14 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency Land and Maritime is soliciting quotations for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369, under solicitation SPE7L7-26-Q-2417. The required delivery timeframe is 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be determined based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. This contract carries stringent security and regulatory requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, the items are classified as hazardous materials, requiring the submission of Material Safety Data Sheets and certification via HAZDEC forms in accordance with FED STD 313D. Packaging and marking must adhere to MIL-STD-2073-1E Level B (Pack Code Q) and MIL-STD-129. Inspection and acceptance will occur at the origin, with DCMA inspection limited to kind, count, and condition. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS