Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hazardous Materials Packaging and Labeling

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910
New
SLED
Truck Loading Biofilter Media Replacement at Plant No. 2 (FR2-0034)
Solicitation # S-2026-736BD
The Orange County Sanitation District (OC San) is soliciting bids under solicitation S-2026-736BD for a general services contract to replace fouled biofilter media within the Truck Loading Biofilter System at Plant No. 2. The project requires the contractor to provide all labor, equipment, and materials to procure Biorem-manufactured media, remove and dispose of 5,624 cubic feet of old media and mesh, clean the air distribution system, and coordinate installation and operator training. To maintain continuous odor control, no more than one biofilter cell may be removed from service at a time. The work must be completed within 84 calendar days from the Notice to Proceed, with all deliverables accepted by the OC San Project Manager. Eligible bidders must hold a California Contractor's License classification A and comply with California Department of Industrial Relations prevailing wage requirements and CARB mobile source regulations. Mandatory requirements include attendance at a pre-bid meeting on September 24, 2026, and submission of bids via the OpenGov portal by October 20, 2026. Bidders must provide proof of comprehensive insurance, including general liability of 2 million dollars per occurrence and 4 million dollars aggregate. Award will be granted to the lowest responsible and responsive bidder. All hazardous materials and waste must be labeled and stored with secondary containment in accordance with safety standards.
Procurement

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

The contract requires comprehensive packaging and labeling of hazardous materials in strict adherence to federal regulations and Defense Logistics Agency standards, ensuring full compliance with safety and transportation requirements. A critical component of the scope includes the accurate preparation and maintenance of Safety Data Sheets for all regulated substances, supporting proper handling, emergency response, and regulatory documentation throughout the supply chain. Performance is expected to be conducted at the designated location in New Cumberland, Pennsylvania, with all activities must meet the precise technical, safety, and administrative benchmarks established by the Department of Defense’s Active Devices Division. This is a subcontract opportunity under NAICS code 562910, focused on waste management and remediation services, with a response deadline of July 16, 2026. The solicitation does not specify a set-aside designation or organizational type restrictions, allowing eligible subcontractors to compete without limitations based on size or category. All proposals must demonstrate proven capability in hazardous material handling, labeling accuracy, SDS compliance, and experience working with DoD logistics frameworks. The contract will be administered through the DLA’s procurement system, with detailed requirements accessible via the provided UI link for full terms and submission instructions.

General Info

Packaging and labeling hazardous materials per DoD standards at New Cumberland, PA, with SDS compliance for waste management services.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-26-T-298U.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONNECTOR, PLUG, ELECTRICAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Packaging and labeling of hazardous materials in compliance with federal and DLA standards, including preparation of Safety Data Sheets (SDS).

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334417
New
DIBBS
59--CONNECTOR,PLUG,ELEC
Solicitation # SPE7M5-26-T-493X
Solicitation SPE7M5-26-T-493X is a Request for Quotations issued by the Department of Defense, specifically the DLA Land and Maritime Active Devices Division, for the procurement of 46 electrical plug connectors under NSN 5935012329602. The items must be produced in accordance with basic drawing 18876 MIS-20045/1 Revision R, reference drawing 18876 MIS-20045 Revision A, and reference specification MIL-DTL-22992H(4) SUP 1. Delivery is required within 71 days, with a need ship date of December 2, 2026, to the DLA Distribution New Cumberland facility in Pennsylvania. Inspection and acceptance will take place at the point of origin. Quotes must be submitted electronically via the DLA Internet Bid Board System by the deadline of September 21, 2026. The procurement is subject to the Buy American and Balance of Payments program and includes a price evaluation preference for SBA-certified HUBZone small business concerns. Packaging must comply with ASTM D3951 or TQ requirement IP025 for hazardous materials, and all shipments must be marked according to MIL-STD-129. Invoicing and payment processing are required through the Wide Area WorkFlow system. The solicitation also incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and prohibitions on the use of certain telecommunications equipment.
Electronic Connector Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS