Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Packaging and Shipping Services

Active

Federal

Response Deadline10/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Hazardous Materials Packaging and Shipping Services supports prime contractors on DLA supply contracts through the Department of Defense. The service provider is responsible for packaging 71 units in accordance with MIL-STD-2073-1E and RP001, applying markings per MIL-STD-129, and executing IP025 hazardous materials protocols. Additionally, the contractor must use hazmat-certified labeling equipment to apply Hazard Warning Labels as required by DFARS 252.223-7001 to ensure all shipments are ready for transport to the destination warehouse. The performance of these services will take place in Tracy, California, under NAICS code 488490 for the DLA DIST SAN JOAQUIN. Interested parties must respond by October 9, 2026, to the solicitation posted on September 28, 2026.

General Info

Hazmat packaging and shipping services for DLA in Tracy, CA, due October 9, 2026.

Agency

Department Of Defense → DLA DIST SAN JOAQUIN

NAICS

488490 - Other Support Activities for Road Transportation

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L7-26-T-5533.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RUN-FLAT KIT, INSERT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 28

subcontract

Response DeadlineOct 9

Submission deadline

Response Deadline

10/09/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging and shipping for prime contractors on DLA supply contracts. Packages 71 units per MIL-STD-2073-1E and RP001, applies markings per MIL-STD-129, and executes IP025 hazardous materials protocols. Applies Hazard Warning Labels per DFARS 252.223-7001 using hazmat-certified labeling equipment. Delivers properly packaged and labeled shipments ready for transport to the destination warehouse.

Similar Contracts

Same NAICS industry code

Specialized Freight Forwarding (CSI/HazMat)This subcontract for the Department of Defense Land Supply Chain involves specialized freight forwarding and physical transport services for prime contractors on DLA supply contracts. The scope of work includes coordinating shipments through designated forwarders, managing FOB Origin delivery requirements, and utilizing specialized transport vehicles to move critical aerospace hardware and hazardous materials to government acceptance points. Operating under NAICS code 488490, the contract focuses on the secure handling of sensitive aerospace components. Interested parties must adhere to the response deadline of October 9, 2026, for this specialized logistics requirement.

LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

MIL-STD-129 and DLA Packaging ServicesThis subcontract under the Department of Defense Land Supply Chain involves providing specialized military packaging and marking services for prime contractors on DLA supply contracts. The service provider is responsible for ensuring all units are fully compliant and ready for shipment by adhering to MIL-STD-129 and MIL-STD-2073-1E and RP001 standards. This includes the application of labels for NSN, contract, lot, and CAGE codes, as well as the proper labeling of hazardous materials in accordance with 29 CFR 1910.1200. The contractor must utilize industrial marking equipment and MIL-SPEC packaging materials to meet these rigorous requirements. This opportunity falls under NAICS code 488490 and has a response deadline of October 9, 2026.

LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

HazMat Packaging and Specialized Shipping ServicesThis subcontract for HazMat Packaging and Specialized Shipping Services involves the specialized packaging, marking, and transportation of hazardous batteries for prime contractors under Defense Logistics Agency supply contracts. The service provider must ensure strict adherence to MIL-STD-2073-1E and RP001 for packaging, MIL-STD-129 for marking, and IP025 for hazardous materials shipping. Additionally, compliance with NAVSEA 5100-003D is required for mercury containment. The contractor is responsible for utilizing HazMat-certified containers and traceable shipping systems to deliver securely packaged batteries FOB Destination. This opportunity falls under NAICS code 488490 and is managed by the Department of Defense. The response deadline for this requirement is October 6, 2026.

Defense Logistics Agency

POSTED

DEADLINE

DLA Compliant Palletization and Shipping Services

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Military-Grade Packaging and PalletizationThis subcontract under the Department of Defense Land Supply Chain involves specialized military packaging, marking, and palletization services for prime contractors fulfilling DLA supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. The contractor must utilize MIL-SPEC materials, specifically applying preservation materials and cushioning or dunnage to ensure the integrity of the shipment. The project consists of the preparation and delivery of five units packaged and palletized for international transit to Taiwan. This opportunity falls under NAICS code 488490, with a response deadline of October 8, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Packaging and Labeling Services

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Packaging and Hazardous Materials HandlingThis subcontract for the Department of Defense Maritime Supply Chain involves providing specialized packaging, marking, and labeling services for prime contractors delivering DLA supply contracts. The work is performed at Robins Air Force Base and requires strict adherence to ASTM D3951 for commercial packaging and MIL-STD-129 for marking and labeling. The scope includes the handling of hazardous materials in accordance with FED-STD-313 and TQ Requirement IP025, utilizing MIL-SPEC labeling equipment. The primary objective is to deliver certified shipments that are properly packaged and labeled to ensure seamless government acceptance.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Military-Standard Packaging and MarkingThis subcontract for the Department of Defense ASC Commodities Division involves providing specialized military packaging, marking, and palletization services for aerospace component deliveries. The contractor is responsible for executing packaging according to MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001, while ensuring all unit packs include Lot/Serial numbers and Cage Codes. Additionally, the scope includes labeling hazardous materials in compliance with 29 CFR 1910.1200 to prepare components for FOB Origin shipment. The project is based in New Cumberland, Pennsylvania, under NAICS code 488490. Interested parties must respond by October 5, 2026, following the posting date of September 27, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense Maritime Supply Chain. The contractor is responsible for providing specialized military packaging, marking, and palletization for prime contractors, ensuring all deliverables are shipment-ready and fully compliant with military specifications. Key technical requirements include applying markings according to MIL-STD-129 and executing packaging in alignment with MIL-STD-2073-1E and RP001. Additionally, the contractor must prepare hazardous material labels per DFARS 252.223-7001 using approved MIL-SPEC cushioning and dunnage. The opportunity is categorized under NAICS code 488490, with a response deadline of October 8, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Packaging and Delivery ServicesThe MIL-SPEC Packaging and Delivery Services subcontract involves providing specialized military-grade packaging and shipping for prime contractors supporting DLA Land and Maritime supply contracts. The scope of work focuses on the processing of critical aerospace and maritime components at Tinker AFB, ensuring all units are packaged and labeled in strict accordance with ASTM D3951 and MIL-STD-129 standards. The service provider must maintain full compliance with the DLA Master List of Technical and Quality Requirements to ensure all deliverables are ready for destination inspection. This opportunity falls under NAICS code 488490 and is managed by the Department of Defense within the Maritime Supply Chain agency, with a response deadline of October 8, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Defense-Compliant Packaging and Shipping Services

FLUID HANDLING DIVISION

POSTED

DEADLINE

LOCAL LET MAINTENANCE CONTRACT, CASS CO, SNOW AND ICE CONTROL

Solicitation # 6510-58-001

The Texas Department of Transportation is soliciting a Local Let Maintenance Contract, identified as project MMC-A00224260 and solicitation number 6510-58-001, for snow and ice control services on Highway US0059 in Cass County. This project has an estimated cost of 940,500.00 dollars and a specified completion timeframe of 180 calendar days. The contract falls under NAICS code 488490 and is managed by the Atlanta District. Proposals are issued to prequalified contractors, with bids due by 10:00 AM on October 22, 2026. Official bidding information, including specifications and addenda, is available through the Electronic State Business Daily, the Electronic Bidding System, and the project proposal. All bids must be submitted to the Texas Department of Transportation by the established deadline to be considered for award.

Texas Department of Transportation

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

Packaging and Marking ServicesThis subcontract for Packaging and Marking Services supports primes delivering DLA supply contracts through specialized military packaging, marking, and palletization. The scope of work requires strict adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 DLA Packaging Requirements for Procurement for palletization. All materials used must meet established ASTM and MIL-STD specifications to ensure shipments are fully prepared for transport. The contract is managed by the Department of Defense under the DLA DIST SAN JOAQUIN agency, with the place of performance located in Tracy, California. Identified by NAICS code 561910, the opportunity was posted on September 28, 2026, with a response deadline of October 9, 2026.

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

Supplier of NSN 4810-01-505-8839This subcontract involves the procurement of eight units of hardware item NSN 4810-01-505-8839 to support primes delivering DLA supply contracts. The supplier is responsible for sourcing or manufacturing the materials in strict accordance with the DLA Master List of Technical and Quality Requirements. Additionally, the provider must ensure all hazardous materials are accompanied by Material Safety Data Sheets and hazard warning labels as mandated by 29 CFR 1910.1200. The contract is managed by the Department of Defense under the DLA DIST SAN JOAQUIN agency, with the place of performance located in Tracy, California. Interested parties must submit their responses by October 9, 2026. The procurement falls under NAICS code 423830 and requires the final delivery of the eight specified units to the designated destination.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Supply of Nickel Alloy K-500 Metal Bars

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Supply of Run-Flat Kit Inserts (NSN 2640014569307)This subcontract involves the manufacture or sourcing of 71 run-flat kit inserts under NSN 2640014569307 for prime contractors supporting Department of Defense supply contracts. The deliverables must strictly adhere to the DLA Master List of Technical and Quality Requirements RA001 and comply with Special Marking Code 32 shelf-life standards. All materials must meet specific NSN requirements, and packaging must be executed according to MIL-STD-2073-1E. The completed units are to be delivered to DLA Distribution San Joaquin in Tracy, California. This procurement falls under NAICS code 339113 and is managed by the Defense Logistics Agency.

Surgical Appliance and Supplies Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supplier of Adhesive (NSN 8040-01-354-1934)

Ophthalmic Goods Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Thermal Insulation Sheet Supply (MIL-DTL-24688A)This subcontract involves the supply of 44 specialized thermal insulation sheets for prime contractors supporting the Department of Defense through DLA DIST SAN JOAQUIN. The materials must conform to MIL-DTL-24688A(1) Revision A, specifically Type 1, with dimensions of 24 by 48 by 2 inches. Quality assurance is managed through inspections performed per MIL-STD-1916 using either attribute or variable methods, and the provider must supply Safety Data Sheets for any hazardous materials. The project is categorized under NAICS code 326112 and will be performed in Tracy, California. Interested parties must respond by October 9, 2026, to meet the requirements of the solicitation posted on September 28, 2026.

Plastics Packaging Film and Sheet (including Laminated) Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Poly-Carbon Monofluoride Li/CFx Type I Batteries

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of NSN 4820-00-585-7566This subcontract, issued by the Department of Defense through DLA Dist San Joaquin, requires the delivery of 157 units of NSN 4820-00-585-7566. The selected provider must manufacture or source the items according to strict technical specifications, ensuring packaging adheres to MIL-STD-2073-1E and RP001, and marking complies with MIL-STD-129. Additionally, the contractor must provide safety data sheets and labels for hazardous materials per 29 CFR 1910.1200 and maintain compliance with DFARS 252.225-7048 and DFARS 252.223-7008. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423840, with the place of performance located in Tracy, California. Interested parties must submit their responses by the deadline of October 9, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-304L

Solicitation SPE7MC-26-T-304L is a total small business set-aside issued by the DLA Land and Maritime agency for the procurement of 157 globe valves. The required items are 2.5 inch hose globe in-line valves rated for 250 PSI, suitable for water or steam media, identified by NSN 4820-00-585-7566. Delivery is required FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a need ship date of March 16, 2027. The contract imposes strict technical and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Technical data access is limited to approved contractors with US/Canada Joint Certification Program certification. Quality assurance requires manufacturer inspection systems to comply with SAE AS9003 or ISO 9001, with a zero-nonconformance requirement for sample lot acceptance. Additionally, the award is subject to the Buy American Act, the Berry Amendment, and specific hazardous material labeling standards under 29 CFR 1910.1200. Invoicing must be processed electronically through the Wide Area WorkFlow system.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

INSULATION, THERMAL

Solicitation # SPE8E6-26-T-4740

Solicitation SPE8E6-26-T-4740 is a Request for Quotations issued by DLA Troop Support Construction and Equipment for the procurement of 44 sheets of vehicle thermal insulation, identified by NSN 5640-01-649-3959. The material must conform to basic specification MIL-DTL-24688A(1) Revision A, specifically part number MIL-DTL-24688 TY 1 24X48X2. Delivery is required within 152 days after the order, with shipping terms set as FOB Origin and the destination for inspection and acceptance located at DLA Distribution San Joaquin in Tracy, California. The contract incorporates strict quality and packaging standards, requiring compliance with MIL-STD-129 for marking and labeling, and RP001 for DLA packaging requirements. Sampling shall follow MIL-STD-1916 or ASQ H1331, with unspecified attributes treated as major. Offerors must adhere to the Buy American Act and Berry Amendment domestic sourcing restrictions and submit quotes via the DIBBS system. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding hazardous material identification, cybersecurity, and combating trafficking in persons.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 10 hours ago

DEADLINE

RUN-FLAT KIT, INSERT

Solicitation # SPE7L7-26-T-5533

Solicitation SPE7L7-26-T-5533 is a request for quotations issued by DLA Distribution San Joaquin for the procurement of 71 run-flat kit inserts under NSN 2640-01-456-9307. The requirement specifies a non-extendable shelf life of 60 months for Type I items and mandates compliance with CMMC Level 2 self-assessment and covered defense information requirements. The items must be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, with an original required delivery date of February 24, 2027, and a need ship date of March 23, 2027. Technical and quality standards include adherence to MIL-STD-129 for marking and RP001 for DLA packaging requirements. The contract prohibits the use of Class I ozone-depleting chemicals and requires specific packaging preservation methods and cushioning thickness. Inspection and acceptance will occur at the destination per FAR 52.246-2. Offerors must submit quotes via the DIBBS portal, ensuring compliance with the Buy American Act and Berry Amendment, and utilize the Wide Area WorkFlow system for electronic invoicing and payment processing.

Tire Manufacturing (except Retreading)

POSTED

about 10 hours ago

DEADLINE

BATTERY, NONRECHARGEABL

Solicitation # SPE7L7-26-T-5525

Solicitation SPE7L7-26-T-5525 is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 85 nonrechargeable Poly-Carbon Monofluoride Li/CFx Type I batteries with a 30-month shelf life. This requirement is specifically set aside for certified Women-Owned Small Business concerns. The batteries, identified by NSN 6135016560761, must be delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of March 10, 2027, and a delivery window of 135 days. The contract mandates strict adherence to quality and safety standards, including sampling methods per MIL-STD-1916 or ASQ H1331 and marking requirements according to MIL-STD-129. Because the items are hazardous materials, suppliers must provide Safety Data Sheets and HCS labels in accordance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E. Packaging must comply with MIL-STD-2073-1E, ensuring terminals are protected against short circuits and outer packaging is marked as non-spillable. Inspection and acceptance will occur at the destination per FAR 52.246-2, and all payment requests must be processed through the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS