Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on July 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hazardous Materials Supply with SDS Compliance

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 424690
New
SLED
Chemical Products Qualified Vendor List - Additional Vendors
Solicitation # STATE 0000000547SL
The State of Missouri, through the Office of Administration Division of Purchasing, is soliciting additional qualified vendors to be added to a Qualified Vendor List for chemical products. These supplies support the Missouri Department of Corrections, Missouri Vocational Enterprises at the Eastern Reception and Diagnostic Correctional Center Chemical Factory in Bonne Terre, Missouri. The contract period runs from the date of award through March 9, 2027. Because of market volatility, the state will not request pricing during the initial solicitation; instead, it will request written quotes from awarded vendors on an as-needed basis and award individual purchases to the lowest and best vendor at the time of the request. Deliveries must be made FOB Destination, Freight Prepaid and Allowed, with a desired delivery window of ten calendar days following a properly executed order. Vendors must comply with strict safety and hazard communication standards, including providing warning labels and Safety Data Sheets that adhere to OSHA’s Hazard Communication Standard. The evaluation process includes bonus points for Missouri service-disabled veteran business enterprises and organizations for the blind or sheltered workshops. Additionally, vendors must certify compliance with the Domestic Products Procurement Act and provide certifications regarding the Anti-Discrimination Against Israel Act. Payments are processed within 30 calendar days of receiving a valid invoice via the MissouriBUYS system.
PROC OA DIVISION OF PURCHASING PROCUREMENTS

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 424690
New
International
Supply of Janitorial and Sanitation Supplies (Soap)
University Hospital of the West Indies

POSTED

1 day ago

DEADLINE

N/A
NAICS: 424690
New
SLED
Pool Chemical Supply and Technical Services
Solicitation # 2026-7
The City of Prairie du Chien is seeking proposals from qualified vendors for the supply of swimming pool chemicals, water testing supplies, and related products to support the operation of its indoor and outdoor pools. The selected supplier must provide high-quality products, competitive pricing, and timely delivery, along with technical support to ensure all operations comply with industry standards and Wisconsin Department of Health Services regulations. This solicitation, identified as 2026-7, was posted on September 11, 2026, with a response deadline of October 1, 2026. Interested parties should direct inquiries to the primary point of contact, Chad Abram. The contract is designated for a state and local government entity within Wisconsin.
City of Prairie Du Chien

POSTED

1 day ago

DEADLINE

in 20 days
NAICS: 424690
New
SLED
Industrial Kitchen Degreaser and Cleaning Supplies
Facilities Management

POSTED

1 day ago

DEADLINE

in 16 days
NAICS: 424690
New
DIBBS
Hazardous Sealing Compound Supplier (NSN 8030-01-511-1245)
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 4 days
NAICS: 424690
New
DIBBS
Supply of Adhesive Primer (NSN 8040017139570)
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 4 days
NAICS: 424690
New
DIBBS
Supply of Tire and Rim Lubricant (NSN 2640002565529)
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 9 days
NAICS: 424690
New
SLED
Hydro Fluorosilicic Acid (23%) Supply and Mini-Bulk Delivery
City of Alcoa

POSTED

1 day ago

DEADLINE

in 9 days
NAICS: 424690
New
SLED
25141 - Mini-Bulk Service for Hydro Fluorosilicic Acid, 23
Solicitation # 25141
The City of Alcoa is seeking bids for mini-bulk delivery services of 23% Hydro Fluorosilicic Acid. The selected contractor will be responsible for the safe and timely delivery of the chemical to tanks located at 302 Sam Houston School Rd. in Maryville, Tennessee, with a preferred delivery schedule occurring every two weeks. All provided chemicals must be NSF Certified for use in drinking water. Bids must be submitted to the Alcoa Purchasing Manager by 2:00 p.m. on Monday, September 21, 2026. This solicitation, identified as number 25141, requires pricing to be provided per gallon delivered. Interested parties may contact Ashley Hardyn for further information regarding this procurement process.
City of Alcoa

POSTED

1 day ago

DEADLINE

in 9 days
NAICS: 424690
New
SLED
Supply of Forensic Analytical Standards and CRMs
New Mexico

POSTED

1 day ago

DEADLINE

in 27 days
NAICS: 424690
New
SLED
Analytical Reference Materials for Forensic Testing
Solicitation # 71-66500-26-78379
The New Mexico Department of Health, Scientific Laboratory, is seeking to establish a price agreement for the procurement of analytical standards, reference materials, and certified reference materials specifically intended for forensic testing. This solicitation, identified by number StateOfNewMexico-71-66500-26-78379, is managed by the state of New Mexico and is open for responses until October 8, 2026. Interested parties must submit their responses by the deadline to be considered for the agreement. The primary point of contact for this procurement is Patrick Gardner, and further details or submission portals can be accessed through the state's official bidding system.
New Mexico

POSTED

1 day ago

DEADLINE

in 27 days
NAICS: 424690
New
Federal
Food Service Consumables & Cleaning Supplies
W6QM Micc-Fdo Ft Sam Houston

POSTED

2 days ago

DEADLINE

in 11 days

AI Contract Overview

Show more

The contract involves the supply of hazardous materials to the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with strict adherence to OSHA’s Hazard Communication Standard required. All materials must be properly labeled in accordance with regulatory requirements, and complete Safety Data Sheets must be submitted for each hazardous substance provided. The solicitation is open as a subcontract under NAICS code 424690 and is set to close on August 3, 2026, with responses due by 5:00 PM on that date. Performance is to be delivered to the location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and no specific set aside provisions are indicated for this procurement. The contract remains active and accessible through the DIBBS platform for qualified vendors to respond.

General Info

Supply hazardous materials to New Cumberland PA facility, comply with OSHA, submit SDS, bid due August 3, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

424690 - Other Chemical and Allied Products Merchant WholesalersView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7MC-26-T-152M.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE, PNEUMATIC TAN

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of hazardous materials requiring compliance with OSHA’s Hazard Communication Standard, including proper labeling and submission of Safety Data Sheets (SDS).

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

New
DIBBS
CARTRIDGE, DEHYDRATOR
Solicitation # SPE8E8-26-Q-0493

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBE
Solicitation # SPE7MC-26-T-190C
This contract is for the procurement of 13 bronze body 1 inch globe stop check valves with flanged end connections, identified by NSN 4820012711891 and Hunt Valve Company part number 6204. The items are designated as critical application items and must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is October 19, 2024, with a delivery window of 102 days. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Key environmental and quality restrictions are in place, specifically prohibiting the intentional addition of mercury or the use of Class I ozone depleting chemicals. Inspection and acceptance will occur at the origin, and the contract incorporates technical and quality requirements as set forth in the DLA Master List.
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333413
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3633
This contract, identified by solicitation number SPE8E7-26-T-3633, is for the procurement of three axial fan impellers under National Stock Number 4140-01-421-3184. The acquisition is managed by the Department of Defense through the DLA Distribution DDSP New Cumberland Facility. The items are required to be delivered to the New Cumberland, Pennsylvania facility with a requested ship date of February 15, 2027, and an original required delivery date of May 4, 2027. Delivery terms are set as FOB Origin, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including documentation for source approval requests and specific DLA packaging requirements. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 standards. Additionally, the supplier must follow specific palletization protocols and ensure that any non-accepted supplies have government identification removed. The procurement is categorized under NAICS code 333413, and all technical requirements are governed by the DLA Master List of Technical and Quality Requirements.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333413
New
DIBBS
FAN, VANEAXIAL
Solicitation # SPE8E7-26-T-3635
This contract is a solicitation for the procurement of one vaneaxial fan, designated under NSN 4140-01-300-8058, for non-nuclear applications. The equipment is specified to operate at 440 volts AC, 60 Hz, 3 phase, and single speed. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with a required delivery timeline of 167 days after order. The solicitation is categorized under NAICS code 333413, which pertains to other compressor and turbine pump manufacturing. The technical requirements heavily modify the MIL-F-18953B standard, specifically regarding coating specifications, material standards, and aerodynamic performance. Key modifications include strict requirements for zinc-molybdate primer and phenolic varnish coatings to ensure durability in air streams, as well as specific instructions for fastener materials and motor insulation temperature rises. Additionally, the contract outlines a rigorous quality assurance and testing protocol, including mandatory sequences for balance, casing tightness, performance, noise, vibration, and high-impact shock testing to ensure the unit meets all aerodynamic and structural stability standards.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-244Z
This contract, identified as solicitation SPE7MC-26-T-244Z, is for the procurement of three ball valves, specifically part number 4-10693 from Circor Aerospace, Inc., under NSN 4820-01-419-1631. The order is managed by the Department of Defense through the DDSP New Cumberland Facility, with a required delivery date of July 11, 2027. The delivery terms are FOB Origin, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It includes a critical prohibition against the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Technical and quality requirements are governed by the DLA Master List, and the items must be delivered to the DLA Distribution center in New Cumberland, Pennsylvania, within 302 days after the order.
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4330
The contract entails the procurement of eight power supply units identified by NSN 6130-01-553-7134 and part number LT-3103-4 under solicitation SPE7L7-26-T-4330, issued as a Service-Disabled Veteran-Owned Small Business Set Aside with a NAICS code of 335931. Delivery is required within 57 days after order placement to the DDSP New Cumberland Facility in Pennsylvania, with FOB Origin terms mandating that pricing includes transportation to a contiguous U.S. destination selected by the offeror. The unit of issue is each (EA), with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, though the DLA Master List of Technical and Quality Requirements supersedes any conflicting ASTM requirements. Palletization must conform to DLA's RP001 guidelines, and all items must be prepared for shipment using the specified parcel post address. The contract includes mandatory cybersecurity compliance via CMMC Level 2 self-assessment and adherence to NIST SP 800-171 requirements for safeguarding covered defense information, with flow-down obligations to subcontractors. Hazardous materials require labeling consistent with OSHA’s Hazard Communication Standard and MIL-STD-129, while items containing radioactive materials above specified thresholds must be marked in accordance with the same standard. Quality assurance protocols mandate sampling under MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No pricing information is provided within the solicitation, and the contract value remains unestablished; however, payment will be processed exclusively through WAWF using required documentation such as invoices and receiving reports. Offerors must hold a valid Unique Entity Identifier and CAGE code, certify their SDVOSB status, and comply with all representations and certifications regarding socioeconomic eligibility, employee eligibility verification, trafficking in persons, sustainable products, and whistleblower protections. The contract prohibits the use of covered telecommunications equipment from designated foreign adversaries, restricts compensation of former DoD officials to prevent organizational conflicts of interest, and requires timely reporting of cyber incidents. All proposals must be submitted electronically via DIBBS by the stated response deadline
Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
FLANGE, GLAND, VALVE
Solicitation # SPE7MC-26-T-198V
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLUID
Solicitation # SPE7MC-26-T-236Y
Solicitation SPE7MC-26-T-236Y is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 20 units of fluid pressure regulating valves, identified by NSN 4820015450854 and Griswold Industries part number 7194503E. The required delivery date and need ship date are both set for April 19, 2027, with a delivery lead time of 222 days after order. Shipping is FOB Destination, with the delivery point designated as the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though DLA Master List technical and quality requirements take precedence. Palletization must follow RP001 guidelines. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the successful contractor is required to use the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. The procurement is subject to the Buy American Act and the Berry Amendment, and it incorporates standard FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and the safeguarding of covered defense information.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
ACTUATOR, ELECTRO-ME
Solicitation # SPE7MC-26-T-244K
This contract, solicitation number SPE7MC-26-T-244K, is issued by the Department of Defense DLA Distribution DDSP New Cumberland Facility for the procurement of two electro-mechanical rotary actuators. The items are identified by NSN 4810-01-392-6644 and correspond to Morpac Industries part numbers 20004 and 20004-1. This is a total small business set-aside under NAICS code 332911, with a required delivery date of July 22, 2028, and a delivery window of 588 days. The contract specifies strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, with delivery and acceptance occurring at the destination in New Cumberland, Pennsylvania. Technical and quality requirements are governed by the DLA Master List, and the contract includes a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. The items are designated as critical application items, and shipping must be coordinated through the specified DLA Distribution facility.
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
BODY, VALVE
Solicitation # SPE7MC-26-T-245F
Solicitation SPE7MC-26-T-245F is a total small business set-aside issued by DLA Land and Maritime for the procurement of 142 valve bodies (NSN 4810-01-485-3588) under NAICS code 332911. A critical technical requirement specifies that the outside threads on the valve body must be manufactured in a counter-clockwise direction, and the contractor is required to inspect the items to ensure compliance. The delivery period is 157 days after order, with a need ship date of February 16, 2027, and a final required delivery date of March 29, 2027. The place of performance and delivery is the DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the origin. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 certification and the safeguarding of covered defense information. Technical data is subject to ITAR or EAR export controls, requiring offerors to have an approved US/Canada Joint Certification Program certification. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization must follow DLA requirement RP001. The use of Class I ozone-depleting substances and mercury compounds in preservation or packaging is prohibited. All quotes must be submitted via the DIBBS portal by September 11, 2026, and electronic invoicing must be processed through the Wide Area WorkFlow system.
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-233Z
Solicitation SPE7MC-26-T-233Z, issued by DLA Land and Maritime, is a request for quotations for the procurement of 20 valve seats, identified by NSN 4820012675967 and Griswold Industries part number C1029C. The required delivery date and need ship date are both set for April 19, 2027, with a delivery lead time of 222 days. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. The procurement incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and mandatory use of the Wide Area WorkFlow system for invoicing and payment. Quotations are due by September 8, 2026, and should be submitted to the issuing office in Columbus, Ohio.
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
PISTON, VALVE
Solicitation # SPE7MC-26-T-244Q
Solicitation SPE7MC-26-T-244Q is a fixed-price request for quotation issued by DLA Land and Maritime for one valve piston, identified by NSN 4820017071595 and Rix Industries part number A508-18923. The requirement falls under NAICS code 332911. The original required delivery date is January 24, 2027, with a need ship date of February 2, 2027. Delivery is specified as FOB Origin, with the shipping destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will also take place at the origin. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as specific packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129. Prohibitions are in place regarding the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized. Payment and invoicing must be processed through the Wide Area WorkFlow (WAWF) system.
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS