Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HEAD, PISTON

Active
SPE4A7-26-T-599WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for one head, piston, part number 41001708 with NSN 1650-01-046-2267, to be supplied by PTI Technologies Inc, CAGE 05228, under solicitation SPE4A7-26-T-599W, with a delivery requirement of 20 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The supplier must comply with DLA packaging standards, CMMC Level 2 self-assessment, and tailored higher-level contract quality requirements applicable to both manufacturers and non-manufacturers. Inspection and acceptance must occur at origin, and non-accepted items must have all government identification removed. Physical marking of the bare item is required, and measuring and test equipment must meet specified standards. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise stated, and if applicable drawings or specifications define critical, major, or minor attributes, they must correspond to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size but not for acceptance criteria, which remains zero defects. The supplier must submit a source approval request with full documentation as required. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, and inquiries should be directed to Lawrence Rucker at the provided contact information.

General Info

One piston head, part 41001708, delivered in 20 days, zero defects, CMMC Level 2, DLA standards, inspection at origin.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
LAWRENCE RUCKER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEAD,PISTON
HEAD, PISTON.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
PTI TECHNOLOGIES INC, CAGE 05228 P/N 41001708
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
SPE4A7-26-T-599W
SECTION B
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
IDENTIFY TO:
SAMPLING:
ADEQUATE DATA FOR THE NSN/Part Number: 1650-01-046-2267 Quantity: 1 EA Purchase Request: 7017669308QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
BEARING, CONTACT
Solicitation # SPE7M4-26-T-291E
This contract specifies the procurement of a CONTACT BEARING with NSN 1650-00-966-9573 and part number 00-276777 from EATON AEROSPACE, LLC, for a quantity of 38 units to be delivered FOB origin within 147 days, with a required ship date of January 5, 2027 and original delivery deadline of March 13, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, which take precedence over any other standards including ASTM D3951. Packing and labeling must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization strictly adhering to RP001. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at destination. The item is designated as a Critical Application Item and the contractor must perform a CMMC Level 2 Self-Assessment to meet cybersecurity requirements. Delivery is to DLA Distribution Cherry Point in North Carolina, with unit of issue as EA and no quantity variance permitted. The contract is issued under solicitation SPE7M4-26-T-291E with a response deadline of August 10, 2026.
FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
WEAR STRIP FAIRING
Solicitation # SPE4A6-26-T-10HP
The contract pertains to the procurement of nine Wear Strip Fairings, identified by NSN 1560-01-643-2612 and part number HMS20-1267/2368, under solicitation SPE4A6-26-T-10HP. The item is to be delivered FOB origin within 163 days of the contract award, with a required ship date of January 17, 2027, and an original delivery deadline of July 15, 2028. Quality assurance is governed by the DLA Master List of Technical and Quality Requirements, which supersedes all other standards unless specifically overwritten by contract amendments. The manufacturer must comply with tailored and non-tailored higher-level quality requirements, including ISO 9001:2015, and adhere to military packaging standards MIL-STD-129 and DLA Packaging Requirements, with commercial packaging per ASTM D3951 allowed only if the item is non-hazardous. Federal Standard 313 determines hazardous classification, and if applicable, TQ requirement IP025 must be followed. Inspection and acceptance occur at the destination, with zero defect sampling mandated under MIL-STD-1916 or equivalent zero-based plans, unless otherwise specified. Marking requirements include physical identification of bare items, with government identification to be removed from non-accepted supplies. Item Unique Identification is not required per customer request. All packaging must be palletized and labeled per RP001, with unit of issue as EA and no variance permitted in quantity. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation guidelines are referenced via DLAD Proc Notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
HEAD, LINEAR ACTUATI
Solicitation # SPE4A7-26-T-600L
The contract covers the procurement of two units of a Head Linear Actuator with NSN 1650-01-110-0251 under solicitation SPE4A7-26-T-600L, issued by the Department of Defense through DLA. Delivery is required FOB origin within 67 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the origin, and the item is classified as a critical application requiring strict compliance with DLA’s Master List of Technical and Quality Requirements, which override any other standards. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging guidelines. Sampling procedures must conform to MIL-STD-1916 or ASQ H1331 Table 1, using zero-defect acceptance criteria unless otherwise specified, with critical attributes requiring an acceptance quality level of 0.1. The item is subject to tailored higher-level quality requirements and physical identification standards, though Item Unique Identification is not mandated. The delivery destination is Tracy, CA, with transportation governed by DLA procedural notes C19 and C20. The contract includes no set-asides and is assigned NAICS code 336413.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PANEL, STRUCTURAL, AI
Solicitation # SPE4A5-26-T-313E
This contract pertains to the procurement of a structural panel designated as PANEL, STRUCTURAL, AI with part number 145T4897-123 and NSN 1560016558444, for a quantity of four units at a unit price of $4.00, totaling $16.00. Delivery is required within 198 days from the contract award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. The item is classified as a critical application item under The Boeing Company and must comply with stringent technical and quality requirements referenced through the DLA Master List, including configuration change management, supply chain traceability documentation per DLA Directive Procurement Note C03, and FAA-specific marking and airworthiness certification requirements. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific preservation methods, container types, and palletization as dictated by DLA Packaging Requirements. No government identification removal or unit identification marking is required per customer direction, and sampling follows MIL-STD-1916 or comparable zero-based plans with zero non-conformances unless otherwise specified. The contractor is also subject to cybersecurity compliance under CMMC Level 2 Self-Assessment and must retain full supply chain traceability records in accordance with DLA guidance. Transportation and freight shipping instructions follow DLAD Proc Notes C19 and C20, with the same destination as the parcel post address. The contract includes applicable CDRLs and references to the Technical Data Package, particularly Quality Assurance Provision 13873 and CDRL-FAACERTCOM-25015, dated January 14, 2025. Compliance with higher-level quality requirements outlined in Procurement Note L32 is mandatory, and all marking, packing, and documentation must align with FAA and DLA specifications. The solicitation number is SPE4A5-26-T-313E, with a response deadline of August 6, 2026, and a required delivery date of December 20, 2025, while the need ship date is set for May 12, 2026. The NAICS code is 336413, and the contracting office is the ASC Supplier Oper OEM Division, Department of Defense.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
NRP, CABLE ASSY, AIRC
Solicitation # SPE7L4-26-T-5862
This contract pertains to the procurement of a cable assembly for aircraft, identified by NSN 1680-01-651-2096 and part number 1072389P-1, with a quantity of four units to be delivered within 147 days. The item is designated as a critical application and governed by stringent technical and quality standards incorporated from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. All materials must comply with prohibitions against Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized. Packaging must align with MIL-STD-2073-1E and DLA packaging guidelines, while labeling and marking follow MIL-STD-129 without special codes. The product is to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Sampling and inspection procedures must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and verification levels are assigned based on attribute criticality. The contractor is required to perform a CMMC Level 2 Self-Assessment to ensure cybersecurity compliance and must use only authorized units of issue as defined by DoD standards. The contract does not permit any variance in quantity—zero percent tolerance on both increase and decrease—and the delivery schedule is fixed with an original required date of January 5, 2028. Transportation and shipping instructions are governed by DLAD procedural notes C19 and C20, and the freight destination matches the parcel post address. The solicitation, issued under SPE7L4-26-T-5862, was posted on July 29, 2026, with responses due by August 10, 2026, and is classified under NAICS code 336413. Primary contract oversight is managed by the Department of Defense, Office of Combat Vehicles and Armament, with Anna-Rachelle Betts as the point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
BRACKET, PEDAL
Solicitation # SPE4A5-26-T-312W
The contract pertains to the procurement of seven units of a pedal bracket identified by NSN 1680-01-608-8421, with a delivery requirement of 128 days after order. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Source approval documentation is mandated, and the item is subject to covered defense information and Cybersecurity Maturity Model Certification Level 2 self-assessment requirements. Packaging must comply with DLA specifications, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, though item unique identification is not mandated per the service customer’s request and DFARS 252.211-7003(c)(1)(i). Technical data associated with the item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including within the U.S., and requiring compliance with DFARS 252.225-7048. Access to such data is restricted to contractors approved by DLA who hold a valid US/Canada Joint Certification Program certification and have completed mandatory training and questionnaire requirements. The solicitation, numbered SPE4A5-26-T-312W, was posted on July 29, 2026, with responses due by August 6, 2026, under NAICS code 336413. Performance is to be delivered to Corpus Christi, Texas, 78419-5255, with primary point of contact Renee Wassum at DLA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
TOW COLLAR, LANDING GEA
Solicitation # SPE4A7-26-T-600P
The contract is for the procurement of two TOW COLLAR, LANDING GEAR units with NSN 1620-01-073-1108 under solicitation SPE4A7-26-T-600P, issued by the Department of Defense through the Defense Logistics Agency. The requirement is designated as a Total Small Business Set-Aside under NAICS code 336413, with responses due by August 6, 2026, and delivery expected within 163 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with DLA packaging standards, inspection and acceptance at origin, and the removal of government identification from non-accepted supplies. Physical identification and bare item marking are mandatory, and the item is subject to Covered Defense Information requirements. The technical data associated with this part is controlled under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons, even within the United States, and only contractors with approved JCP certification, completed DOD export training, and DLA authorization may access the data. Cybersecurity compliance requires CMMC Level 2 certification by a C3PAO, and performance is to occur at Tinker AFB, Oklahoma. Primary point of contact is Mahlon Marcus at DLA.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A7-26-T-600A
The contract is for the procurement of 16 structural plates designated for aircraft use, identified by part number 68A350868-2010 and NSN 1560-01-291-2535. The item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DOD export-controlled technical data, and have received explicit approval from DLA. Packaging must adhere to DLA procurement standards, and physical identification of the item must follow specified marking requirements. Cybersecurity compliance is enforced through CMMC Level 2 certification for any assessed third-party organizations involved. The solicitation number is SPE4A7-26-T-600A, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 6, 2026, and an expected delivery timeline of 166 days after award. Performance will occur at Robins Air Force Base, Georgia, with Mahlon Marcus listed as the primary point of contact. The NAICS code 336413 applies, indicating the item falls under aircraft manufacturing. No set-aside classification is specified, and the contract is open to federal contractors meeting all export, cybersecurity, and packaging requirements. The technical data associated with the item is tightly controlled, and failure to comply with export regulations or handling protocols will result in contract violation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
DUCT, AIR CONDITIONING
Solicitation # SPE4A7-26-Q-0882
The contract is for the procurement of two duct air conditioning units under NSN 1560-00-878-4950, with a delivery requirement of 282 days after award. It is issued under solicitation SPE4A7-26-Q-0882, with a response deadline of August 10, 2026, and is classified under NAICS code 336413 for aircraft and parts manufacturing. The contract incorporates a comprehensive set of technical and quality requirements referenced from the DLA Master List, including packaging standards, inspection at origin, measurement and test equipment compliance, and configuration change management. Export control is strictly enforced under ITAR or EAR regulations, prohibiting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and applies to all contractors and their subsidiaries. Access to this data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled technical data, and have received formal approval from the DLA controlling authority. Additionally, government identification must be removed from non-accepted supplies, and all work must comply with tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The primary point of contact is April Reed of the Department of Defense’s ASC Supplier Oper AE and AF Division, reachable via email and phone provided in the contract data.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
KIT, SPLICE BAR
Solicitation # SPE8E6-26-T-3921
The contract is for the procurement of fifteen KIT, SPLICE BAR units with part number 9365604 and NSN 6920-01-194-7668, issued under solicitation SPE8E6-26-T-3921 by the Defense Logistics Agency. The requirement is classified under NAICS code 336413 and is slated for delivery within ten days of award. Acceptable sourcing is restricted to INSUL-8-CORP OMAHA, NE operating as CONDUCTIX INC with CAGE code 00503, reflecting limited competition due to proprietary or insufficient data for broader bidding. The technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue date unless modified by an amendment. Packaging must adhere to DLA packaging requirements, and all supplies must comply with the directive to remove government identification from non-accepted items. The point of contact for inquiries is Sophia Lim, reachable via email and phone provided, and responses are due by August 10, 2026.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
STIFFENER, AIRCRAFT
Solicitation # SPE4A7-26-Q-0888
The contract pertains to the procurement of four aircraft stiffeners identified by NSN 1560-01-467-5640, with a delivery requirement of 221 days after award. Technical and quality specifications are governed by referenced requirements from the DLA Master List, including packaging standards, tailored quality controls, inspection protocols at the manufacturer’s facility, and procedures for removing government identification from non-accepted items. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program who have completed mandatory DLA training and questionnaire approvals. The solicitation, issued under number SPE4A7-26-Q-0888, was posted on July 29, 2026, with responses due by August 8, 2026. The contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with April Reed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A5-26-T-313B
The contract specifies the procurement of a structural plate identified by NSN 1560016936152 and part number 356T0102-1, supplied in a quantity of one unit under solicitation SPE4A5-26-T-313B. The item is classified as a critical application component for Boeing and is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which incorporate R and I numbers as governing specifications. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and supply chain traceability documentation must be retained per DLA Directive Procurement Note C03. The plate must meet FAA bare item marking requirements and airworthiness approval standards, with verification procedures aligned to MIL-STD-1916 or ASQ H1331, including zero non-conformances in sampling unless otherwise stated. Packaging and marking adherence to MIL-STD-2073-1E and MIL-STD-129 is mandatory, with palletization following DLA Packaging Requirements, and parcel post shipping is explicitly prohibited. Delivery is FOB origin with a strict 20-day timeline, inspection and acceptance occurring at destination, and both units carry identical packaging and delivery conditions. The contract also defines specific freight and receiving addresses at Joint Base MDL, New Jersey, and requires shipment by the fastest traceable means with unique tracking identifiers. Unit price is set at $1.00, total price reflects nominal value, and no quantity variance is permitted. The item does not require Unique Identification per customer request, and all documentation and compliance obligations are tied to active DLA and DoD directives as of the solicitation and award dates.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332312
New
DIBBS
MOUNT, RESILIENT, WEAPON
Solicitation # SPE4A7-26-T-599Z
Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
LATCH, VALVE
Solicitation # SPE4A7-26-T-600D
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
HANGER, CABLE
Solicitation # SPE4A7-26-T-600M
The contract pertains to the procurement of one cable hanger with NSN 5975-01-603-7325 and part number CMS151024, supplied by JONATHAN ENGINEERED SOLUTIONS CORP., under solicitation SPE4A7-26-T-600M. Delivery is required within five days at FOB origin, with no variance allowed in quantity, and acceptance occurs at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, material codes, and unit container specifications. Marking must adhere to MIL-STD-129 with no special marking code applied, and palletization must follow DLA standards. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking processes, except for functional uses in specified items like batteries, fluorescent lamps, sensors, or naval instrument components, which must include a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and quality attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The deliverable is to be shipped to the Portsmouth Naval Shipyard in Kittery, Maine, via the fastest traceable means, explicitly excluding parcel post. The government point of contact is Tasia Carney, and the required delivery date is September 26, 2025. Technical and quality requirements referenced in the DLA Master List, including RD003, RP001, RQ011, and RQ017, are incorporated by reference, governing material handling, identification, and non-accepted supply removal. All provisions align with DoD unit of issue standards and are to be interpreted per the version of the DLA Master List effective at the solicitation issuance date. The contract is classified with a NAICS code of 335932 under the Department of Defense, and government use codes indicate specific logistics and distribution identifiers for internal tracking.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-Q-0918
The contract specifies the procurement of four machine thread plugs identified by NSN 5365-01-441-1667, with a delivery requirement of 125 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract includes stringent cybersecurity and export control obligations, requiring compliance with Cybersecurity Maturity Model Certification Level 2 and adherence to ITAR or EAR regulations for technical data, which prohibits unauthorized disclosure to foreign persons regardless of location. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization may access the controlled technical data. Additional provisions mandate specific packaging, inspection at origin, removal of government identification from non-accepted items, physical marking of bare items, and compliance with tailored quality requirements for manufacturers and non-manufacturers. The solicitation number is SPE4A7-26-Q-0918, issued on July 29, 2026, with responses due by August 5, 2026, under a federal procurement managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, and the point of contact is Renee Bynum at renee.bynum@dla.mil.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-Q-0931
This contract pertains to the procurement of 45 units of a shim identified by NSN 5365-01-579-3967 under solicitation SPE4A7-26-Q-0931, with a responsive deadline of August 6, 2026, and a delivery requirement of 175 days after order. The technical and quality standards applicable to this item are defined by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless a subsequent amendment supersedes it. The contract mandates compliance with cybersecurity requirements through CMMC Level 2 certification by a Third-Party Assessment Organization and enforces DLA packaging standards. It includes tailored higher-level quality requirements for both manufacturers and non-manufacturers, with inspection and acceptance to occur at origin. Physical identification of the item must conform to specific marking standards, and any non-accepted supplies must have government identification removed. Export control is strictly enforced on associated technical data governed by ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Commerce, and applies to foreign nationals regardless of location. Access to controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed required DOD training and obtained DLA approval. The contract is administered by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with primary contact Renee Bynum at renee.bynum@dla.mil.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332312
New
DIBBS
PANEL, STRUCTURAL, AI
Solicitation # SPE4A7-26-Q-0920
The contract is for one structural panel, item number 1560-01-196-4405, under solicitation SPE4A7-26-Q-0920, with a delivery deadline of 440 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions applicable based on the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions use the revision active on the RFP issue date unless a later amendment supersedes it. The item is subject to multiple DLA-specific requirements including packaging, inspection and acceptance at origin, physical identification and marking of the bare item, measurement and test equipment standards, and configuration change management through engineering change proposals. Importantly, the item is exempt from item unique identification per service customer request, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, requiring explicit authorization for any disclosure to foreign persons, regardless of location, and only contractors with approved JCP certification, completed training, and DLA clearance may access such data. All applicable DFARS clauses, including those governing export control and contractor responsibilities, are in effect. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with NyA Currie as the primary point of contact.
Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333924
New
DIBBS
RETAINER, HEATING UN
Solicitation # SPE4A7-26-T-600J
The contract pertains to the procurement of two retainers for a heating unit, identified by NSN 1450-01-361-2850, under solicitation SPE4A7-26-T-600J, with a delivery requirement of 20 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including foreign nationals within the United States or overseas, without prior authorization from the Department of State or Department of Commerce. Distribution is restricted to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally authorized by the Defense Logistics Agency to handle such data, with DFARS 252.225-7048 governing compliance. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Lexus Henry as the primary point of contact, and bids must be submitted by August 6, 2026, under a federal procurement process with NAICS code 333924.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
HASP, HALF
Solicitation # SPE4A7-26-T-599R
The contract pertains to the procurement of a HASP, HALF item identified by NSN 5342-00-316-0149, with a quantity of six units to be delivered within 20 days FOB origin. All packaging must comply with MIL-STD-2073-1E standards, including specific preservation methods, wrapping materials, unit containers, and intermediate packaging as designated by code, and marking must adhere to MIL-STD-129 without special markings. The item's technical data is available unrestricted, and sampling for quality verification follows MIL-STD-1916 or comparable zero-based plans, with attributes classified according to specified verification levels or AQLs unless otherwise defined. The technical data package references drawings dated 1972 and 1984 under part number 11655291 and is governed by the DLA Master List of Technical and Quality Requirements. Delivery is directed to a facility in Nantou County, Taiwan, with no variance permitted in quantity and inspection and acceptance occurring at the origin. The solicitation number is SPE4A7-26-T-599R, with a response deadline of August 6, 2026, and the contract falls under NAICS code 332994. The point of contact is Lexus Henry, and transportation and freight forwarding are governed by DLA procedural notes C19 and C20.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
ATTITUDE INDICATOR
Solicitation # SPE4A7-26-R-X975
The contract pertains to the procurement of a single Attitude Indicator identified by NSN 1680-01-657-6918, manufactured by RIEKER INSTRUMENT CO., INC. with part number 5002-R, under solicitation SPE4A7-26-R-X975, issued as a Total Small Business Set-Aside. The item is subject to a Firm Fixed Price arrangement with no variance allowed in quantity, and delivery is required within 87 days after award. Inspection and acceptance occur at the origin, and packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and marking as per MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and transportation details reference DLAD procedural notes C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List, including tailored quality provisions, inspection protocols, and the requirement for zero non-conformances under a zero-based sampling plan aligned with MIL-STD-1916 or ASQ H1331, with verification levels assigned based on critical, major, and minor attributes. Cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment, and physical identification of the item must meet RQ017 marking requirements. All covered defense information is controlled under RD002, and the contractor must follow government procedures for removal of identification from non-accepted items.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-T-599Q
This contract is for the procurement of 14 units of a PLUG, MACHINE THREAD with NSN/Part Number 5365-01-490-0332, under solicitation SPE4A7-26-T-599Q, with a response deadline of August 6, 2026, and delivery expected 171 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer, including disclosure to foreign persons within or outside the United States, requires prior authorization from the Department of State or Department of Commerce. Technical data associated with this item is governed by DFARS 252.225-7048, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, are permitted access. The placing organization is the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with performance location in New Cumberland, Pennsylvania, and primary point of contact Brandon Smith at brandon.1.smith@dla.mil.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
ARM, ACTUATING VANE
Solicitation # SPE4A7-26-T-599K
The contract pertains to the procurement of 5,059 units of an ARM, ACTUATING VANE with NSN 2840-00-199-5235, issued under solicitation SPE4A7-26-T-599K by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The item is classified as technical data subject to U.S. export control regulations, either ITAR or EAR, meaning any transfer, including electronic disclosure to foreign persons within or outside the United States, requires explicit government authorization. DFARS 252.225-7048 governs the handling of this controlled information, and access is restricted to contractors certified under the U.S./Canada Joint Certification Program who have completed mandatory DLA training and approval processes. Delivery is scheduled 547 days after award, with the place of performance located at Cherry Point, North Carolina, 28533-5040. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, under a NAICS code 336412 indicating aircraft and missile propulsion systems manufacturing. The primary point of contact for inquiries is Mahlon Marcus, reachable via email and phone. The acquisition is designated as a federal procurement with no set-aside classification. All parties handling the technical data must comply with stringent controls to prevent unauthorized disclosure, extending to U.S. companies and their foreign subsidiaries, and DLA mandates additional verification steps before granting access to the controlled technical information.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details