Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HEAD, SPRINKLER, FIRE

Active
SPE8E6-26-T-4007Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of four brass fire protection sprinkler heads, specifically the Bete Fog Nozzle model 2-1/2 inch SCF70W, identified by NSN 4210-01-386-3436, under solicitation SPE8E6-26-T-4007. The items must be delivered FOB origin within 167 days of contract award, with delivery required by February 1, 2027, despite an original required date of November 15, 2026. The quantity is fixed at four units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and codes, while palletization follows DLA’s RP001 requirements. Hazardous materials guidelines are strictly enforced, prohibiting intentional use of mercury or mercury-containing compounds unless explicitly exempted, such as in certain batteries or instruments, which must include secondary containment per NAVSEA 5100-003D. All shipments must be labeled and addressed to DLA Distribution at the New Cumberland, Pennsylvania facility, following DLA’s transportation and shipping protocols. Technical and quality standards referenced via R and I numbers are governed by the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. The contract prohibits the inclusion of covered defense information and mandates full compliance with all applicable federal procurement and safety standards.

General Info

Four brass sprinkler heads delivered FOB origin by Feb 1, 2027, per DLA packaging and safety standards.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E6-26-T-4007.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
John Lieb
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEAD,SPRINKLER,FIRE
HEAD, SPRINKLER, FIRE PROTECTION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
BETE FOG NOZZLE INC
GREENFIELD MA
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CRITICAL APPLICATION ITEM
BETE FOG NOZZLE, LLC 99134 P/N 2-1/2 IN. SCF70W BRASS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757561 0001 EA 4.000
NSN/MATERIAL:4210013863436
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
SPE8E6-26-T-4007
SECTION B
PR: 7017757561 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:11/15/2026
SPE8E6-26-T-4007 NSN/Part Number: 4210-01-386-3436 Quantity: 4 EA Purchase Request: 7017757561QTY: 4 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
SKID, PLATFORM
Solicitation # SPE8EF-26-T-1567
The contract is for the procurement of 2,243 units of a SKID, PLATFORM identified by NSN 3990-01-484-6521 under solicitation SPE8EF-26-T-1567, with a total price of $2,243.00 per unit. Delivery is required FOB origin within 167 days of the contract award, with inspection and acceptance points both set at the destination. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with wooden pallets and containers constructed from heat-treated wood certified by an ALSC-recognized agency, marked clearly and visibly. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Oak and chestnut wood must be bark-free, square-edged, or have a moisture content of no more than 20 percent. The contractor is responsible for inspecting each shipment for compliance. Deliveries must be sent to DLA Distribution Red River in Texarkana, Texas, with an original required delivery date of February 5, 2027, and a need ship date of February 1, 2027. The unit of issue is each, with no variance allowed in quantity.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BRACKET, CYLINDER ST
Solicitation # SPE8E9-26-T-3323
The contract pertains to the procurement of a BRACKET, CYLINDER ST with NSN 4210-01-141-4027 and part number 52427, supplied by TYCO FIRE PRODUCTS LP. A total of 27 units are required at a unit price of $27.00, resulting in a total contract value of $729.00. Delivery is scheduled to occur within 167 days from the contract date, with FOB origin terms and inspection and acceptance points set at the destination. All packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is classified as a commercial item, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and solicitation timeline. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, and the shipment must comply with DLA transportation notes C19 and C20 for freight and first destination handling. The required ship date is February 1, 2027, and the original delivery deadline is April 16, 2027. The solicitation was issued under contract number SPE8E9-26-T-3323, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Construction & Equipment MRO Service I under NAICS code 333998.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE8E6-26-T-3992
The contract specifies the procurement of a fire fighting hose reducer, part number 13218E0470-42, constructed from cast or forged brass in accordance with MIL-DTL-52404C, featuring a 2.5-inch National Hose internal thread with swivel and a 1.5-inch National Hose external thread. Plating is not required, and first article testing is mandatory with two units submitted for testing under government quality assurance representative observation, as dictated by MIL-C-52404C and referenced quality assurance provisions. The item is governed by strict inspection and acceptance protocols at origin, with sampling to comply with MIL-STD-1916 or comparable zero-based plans, and non-conformances not permitted unless otherwise specified. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special marking requirements. The contract includes a separate line item for the first article test unit priced at $1.00, which is non-reimbursable if the test requirement is waived, and the main procurement line item for 11 units at $11.00 each totaling $121.00, with delivery required within 227 days FOB origin to the DLA New Cumberland facility. All technical and quality requirements referenced are incorporated via the DLA Master List, including specific provisions for casting and forging assistance requests if tooling is unavailable to the contractor. The drawing and specification control revisions are detailed and dated, with the governing standard being MIL-DTL-52404C, and the product classified as Type XV, Class D. The contract explicitly prohibits government identification removal from non-accepted supplies and includes protections for covered defense information. Delivery is restricted to the specified origin point with zero variance allowed in quantity, and transportation logistics are governed by specific DLA procedural notes. The solicitation number is SPE8E6-26-T-3992, with a response deadline in August 2026 and a required delivery date set for April 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
SEAL, TAMPER PROOF
Solicitation # SPE8E6-26-T-4062
The contract is for the procurement of tamper-proof seals under solicitation SPE8E6-26-T-4062, issued by DLA Dist San Joaquin under a Women-Owned Small Business Set-Aside, with a NAICS code of 333998. The item, identified by NSN 4210-01-446-1015 and part numbers 322-YELLOW and 6630000-Y, is to be supplied in a quantity of 252 MX with a firm fixed price and no variance allowed in quantity. Delivery is required within 69 days of award, FOB origin, with inspection and acceptance occurring at the destination warehouse in Tracy, CA. All packaging must comply with DLA’s master technical and quality requirements, incorporating MIL-STD-129 labeling, and adhere to either Fed-Std-313 for hazardous materials under IP025 or ASTM D3951 for non-hazardous items, with DLA standards taking precedence. Packaging and palletization must meet RP001 requirements, and the unit of issue and quantity per unit pack must align precisely with the contract specifications. The delivery must be completed by February 12, 2027, with an original ship date of October 26, 2026, and transportation logistics are governed by DLA procurement notes C19 and C20. All technical and quality standards referenced are controlled by the DLA Master List effective on the solicitation issue date.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
COUPLING ASSEMBLY, HOSE
Solicitation # SPE8E9-26-T-3300
The contract is for the procurement of four coupling assemblies, hose, fire fighting, identified by NSN 4210-00-368-2904 and part number 502, manufactured by Service Brass and Aluminum Foundry in Phoenix, AZ. Each coupling is brass with both ends female, featuring a 2-1/2 inch NH swivel interface with eight flat lugs and must be marked in accordance with MIL-STD-130 Section 5.3.1. Configuration control follows MIL-STD-973, excluding specific subparts. The product must not contain intentionally added mercury or mercury-containing compounds, except for limited functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. All packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. Delivery is scheduled for 167 days after award, with FOB origin terms, zero variance allowed in quantity, and inspection and acceptance occurring at the destination. The shipment must be sent to the DLA Distribution facility in New Cumberland, PA, under the parcel post address provided, and transportation instructions follow DLAD Proc Notes C19 and C20. The original required delivery date is October 27, 2026, with a needed ship date of February 1, 2027. The solicitation was issued under SPE8E9-26-T-3300 with a response deadline of August 17, 2026, and is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with covered defense information potentially applicable. The unit of issue is each (EA), and the contract falls under NAICS code 333998 with the Department of Defense as the contracting agency.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TIE DOWN, CARGO, VEHICLE
Solicitation # SPE8EF-26-T-1575
This contract is for the procurement of 260 units of cargo vehicle tie-downs under the NSN 3990-01-619-7774 and part number 592736, issued by the Defense Logistics Agency through solicitation SPE8EF-26-T-1575. The requirement is set as a total small business set-aside, with delivery due 167 days after award, no later than February 1, 2027, and must be shipped FOB origin with zero variance in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be labeled and packaged according to MIL-STD-129, with palletization following DLA Packaging Requirements. The unit price is $260.00 per unit, totaling $67,600.00, and inspection and acceptance occur at the destination. The supplies are to be delivered to the DDSP New Cumberland Facility in Pennsylvania, with transportation governed by specific DLA procedural notes C19 and C20. Government identification must be removed from non-accepted supplies, and the contract incorporates provisions for covered defense information. The point of contact for inquiries is Russell Keiser, and the NAICS code is 333998.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TUBE ASSEMBLY, FIRE
Solicitation # SPE8E6-26-T-3991
The contract is for the procurement of two tube assemblies for a fire extinguishing system, identified by part number 65506-09014-042 and NSN 4210000895252, to be supplied by ROTAIR AIRCRAFT CORP to SIKORSKY AIRCRAFT CORP. The item must conform to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede commercial packaging standards such as ASTM D3951. All packaging and labeling must comply with MIL-STD-129 and DLA’s packaging requirements, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification and is subject to Covered Defense Information protocols. The supplier must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and the delivery is FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, with a required delivery date of February 1, 2027, and a lead time of 167 days from the contract award. The unit of issue is each, with a total contract value based on the specified quantity. The contract is issued under solicitation SPE8E6-26-T-3991 with performance directed to DLA Distribution in San Diego, California, and procurement is restricted due to proprietary or insufficient data for competitive bidding.
SAN DIEGO

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BRACKET, FIRE EXTINGUIS
Solicitation # SPE8E6-26-T-4002
The contract is for 54 fire extinguisher brackets with NSN 4210-01-147-6483, designated as a critical application item, specifically designed for use with the ANSUL Sentry Model 2013, 20-pound dry chemical extinguisher. The item manufacturer is TYCO FIRE PRODUCTS LP with part number 30937, and it must be painted red. All supplies must comply with DLA packaging requirements and MIL-STD-2073-1E for preparation, including packaging method 10, dry climate control, and use of standard unit containers and intermediate containers. Packaging and marking must follow MIL-STD-129 with no special marking required. The contract prohibits the intentional addition of mercury or mercury-containing compounds in any hardware or supply, except for approved functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occur at destination, and the required delivery date is 76 days from the solicitation, with a need ship date of November 2, 2026, and original delivery date of November 4, 2026. The item is shipped to DLA Distribution at the New Cumberland facility in Pennsylvania, and transportation guidelines are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E6-26-T-4002, issued under a federal acquisition program with NAICS code 333998, and responses are due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TIP, NOZZLE, FIRE HOS
Solicitation # SPE8E6-26-T-4004
The contract pertains to the procurement of a tip, nozzle, and fire hose assembly identified by NSN 4210010963447 and part number 20330001 from Akron Brass Company, with a total quantity of 35 units to be delivered within 64 days of contract award. The delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specified materials, methods, and markings, and palletization must adhere to DLA packaging requirements. All items must be free from intentional mercury or mercury-containing compounds, except for limited functional uses in approved devices such as batteries, fluorescent lights, or weapons systems, with mercury-containing portable items requiring dual containment per NAVSEA 5100-003D. The contract references DLA’s Master List of Technical and Quality Requirements for compliance, and hazardous material shipping follows DLAD Proc Note C19, with delivery directed to the DDSP New Cumberland Facility in Pennsylvania. The original required delivery date is October 29, 2026, with a need ship date of October 21, 2026, under solicitation SPE8E6-26-T-4004, issued by the Department of Defense through the Defense Logistics Agency.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TIE DOWN, CARGO, VEHI
Solicitation # SPE8EF-26-T-1580
This contract is for the procurement of cargo tie-downs for vehicles under solicitation SPE8EF-26-T-1580, issued by the Defense Logistics Agency. The item, identified by NSN 3990-01-518-6574 and part number 15MTC/1748, is to be delivered in a quantity of four AY units with a delivery window of 167 days from the contract award. Delivery is FOB origin, and inspection and acceptance occur at the destination location. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and containerization as outlined in the DLA Master List of Technical and Quality Requirements referenced by R-numbers. Marking must follow MIL-STD-129 with no special marking codes applied, and palletization must adhere to DLA standards. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with narrow exceptions for functional uses in batteries, instruments, weapon systems, and specified reagents, and requires mercury-containing portable lamps and instruments to have shockproof design and secondary containment in compliance with NAVSEA 5100-003D. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with an original required delivery date of July 19, 2027, though a need ship date of February 1, 2027, has been specified. The contract includes strict quality controls, government-mandated compliance with technical specifications, and transportation rules outlined in DLAD procedural notes.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
HEAD, SPRINKLER, FIRE PR
Solicitation # SPE8E6-26-T-4060
The contract pertains to the procurement of 200 fire protection sprinkler heads under NSN 4210-01-231-7168, issued by DLA Dist San Joaquin under solicitation SPE8E6-26-T-4060, with a response deadline of August 17, 2026, and a delivery requirement of 127 days after order. The item is procured in full competition in accordance with military or federal specifications, and the contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA web portal, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes must be assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively, with unspecified attributes deemed major. The drawing for the item is available only during open solicitation via the DIBBS portal, and covered defense information potentially applies, requiring compliance with applicable security protocols. All supplies must be free of government identification if not accepted, and the place of performance is Tracy, CA, 95304-5000, with primary point of contact John Lieb reachable via email and phone for inquiries.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
POINTER ASSEMBLY
Solicitation # SPE7M2-26-Q-0721
The contract is for the procurement of 14 units of a POINTER ASSEMBLY with NSN 1720-00-867-0084 under solicitation SPE7M2-26-Q-0721, issued by the Department of Defense’s Nuclear Reactor Program through the Defense Logistics Agency. The requirement mandates that the vendor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization, ensuring adherence to stringent cybersecurity standards. Technical and quality specifications referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition’s scale. The technical data associated with this item is subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States, and restricts distribution strictly to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. Delivery is required within 250 days after delivery order issuance, with responses due by August 13, 2026. The point of contact for inquiries is Kyle Barr, reachable via email and phone provided, with all documentation accessible through the DIBBS portal.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details