Heat Recovery Solutions

Valve Disk Retainer Manufacturing (Forging & Machining)This subcontract involves the manufacturing of five Valve Disk Retainers for prime contractors supporting DLA supply contracts. The scope of work requires forging base components from Monel alloy specifically for sea water media, followed by precision CNC machining to meet NSN 4820-01-242-8146 specifications. The project is managed under the Department of Defense through the DDSP New Cumberland Facility. Strict adherence to the DIA Master List (RA001) and DFARS 252.204-7012 cybersecurity reporting standards is mandatory for compliance. Performance will take place in New Cumberland, Pennsylvania.

POSTED

DEADLINE

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Forging and Manufacture of Tube-to-Boss TeesThis subcontract involves the forging and manufacture of five Tube-to-Boss Tees for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The project requires the use of custom tooling to execute forging processes that meet SAE AS1002K and AS18280H standards, specifically adhering to Class 3 thread specifications. Performance of the contract will take place at Robins Air Force Base. To be eligible, the manufacturer must hold PRI QML/QPL accreditation and maintain NIST SP 800-171 compliance. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 332410.

Forging and Tooling for Tube-to-Boss TeeThis subcontract involves the primary manufacturing of Tube-to-Boss Tee components for the DLA Weapons Support Fluid Handling Division. The scope of work includes the design and fabrication of forging dies and tooling necessary to shape components according to NSN 4730-01-309-0959 technical specifications using industrial forging presses. The final deliverable for this project consists of six forged units. Performance will take place at Robins Air Force Base. To be eligible, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR, EAR, the Buy American Act, and the Berry Amendment. The project falls under NAICS code 332410.

POSTED

DEADLINE

Titanium Sheet (6AL-4V) Material SupplierThis subcontract through the Defense Logistics Agency involves the supply of Titanium Sheet (6AL-4V) for prime contractors working on Department of Defense projects. The material must strictly conform to SAE AMS4911 Rev T and part number .120X36X144_6AL-4V_AMST9406_CND, with specific dimensions of .120 inches by 36 inches by 144 inches. The supplier is responsible for rigorous quality control to ensure all materials meet AMS standards. Each delivery must include the physical titanium sheets accompanied by a mandatory Certificate of Quality Conformance. The opportunity was posted on October 21, 2026, with a response deadline of October 28, 2026, falling under NAICS code 332410.

POSTED

DEADLINE

Defense Logistics Agency

POSTED

DEADLINE

Forged Anchor Shackle FabricationThis subcontract involves the forging and machining of 40 anchor shackles for prime contractors supporting DLA Weapons Support ASC projects. The contractor is required to forge shackle stock to a 1-1/8 inch diameter in accordance with Federal Specification Type 4A, Grade A, Class 2, utilizing custom tooling and industrial forging equipment. Performance will take place in Jacksonville, Florida. To ensure quality and security, the provider must comply with SAE AS9003 or ISO 9001 quality systems and adhere to MIL-STD-1916 or ASQ H1331 sampling standards. Additionally, a CMMC Level 2 self-assessment is mandatory for this engagement. The final deliverable consists of 40 completed forged anchor shackles.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

ME-RFQ-021 Cooling Tower Package

Solicitation # 6ad91a43707772fad77d29bc

Mexichem Fluor Inc. is seeking quotations for a modular stainless steel cooling tower with a built-in sump to support a Lithium hexafluorophosphate plant in Louisiana, funded by Department of Energy Grant DE-MS0000009. The request for quotation is scheduled for release around November 20, 2026, following an advertisement period that runs from October 21, 2026, through November 20, 2026. Prospective bidders must be registered in good standing with SAM.gov and have a signed non-disclosure agreement in place to receive bid documents. Evaluation will be based on technical and commercial merits, governmental compliance, supplier qualifications, and relevant past experience. Interested parties should coordinate with Jennifer Yaros at Worley for the necessary non-disclosure agreements.

POSTED

DEADLINE

Supplier of Hook and Pile Fastener Tape (NSN 5325-01-714-7820)This subcontract involves the supply of four units of hook and pile fastener tape matching NSN 5325-01-714-7820 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The materials must adhere to standards set by 3M Company or Grainger Integrated Supply and are to be delivered to NCTS Guam. The agreement requires strict compliance with the Buy American Act and the Berry Amendment. Additionally, the supplier must follow DFARS 252.204-7012 regulations regarding the safeguarding of covered defense information. The procurement falls under NAICS code 332410.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hydraulic Manifold Forging ServicesThis subcontract for Hydraulic Manifold Forging Services involves the initial forging of 77 raw manifold blanks for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The work must be performed according to TDP Rev B Gen 2 and reference drawings 81755 NDTS-1101 and 81755 HZ001, utilizing materials that conform to FMS-3027. Performance of the contract will take place at Hill AFB. The opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332410. Due to the nature of the defense work, the selected provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. Responses are due by November 2, 2026.

Rigid Connecting Link Forging and FabricationThis subcontract opportunity, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, involves the primary manufacturing of 132,000 rigid connecting links (NSN 3040-01-158-9660). The project requires the use of forging presses to produce units that adhere to SS9208 acceptance limits and meet ANSI/NCSL Z540-1-1994 or ISO 10012-1 calibration standards. Performance will take place in Corpus Christi, Texas. The contract is designated as a Total Small Business Set-Aside under NAICS code 332410. Due to the nature of the defense work, the successful contractor must maintain strict regulatory compliance, including CMMC Level 2, NIST SP 800-171, and ITAR/EAR standards. Responses are due by October 26, 2026.

POSTED

DEADLINE

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

44--COOLER,FLUID,INDUST

Solicitation # SPE8E827T0276

DLA Troop Support is soliciting quotes for the procurement of three industrial fluid coolers, identified by NSN 4420012633992. The contract requires delivery to DLA Distribution within 104 days after the order is placed. Approved sources for this equipment are limited to 0AT62 MLF33309AG1 and 8FGX3 MLF33309AG1. This opportunity is issued as a Request for Quote under solicitation number SPE8E827T0276, with a response deadline of November 2, 2026. All quotes must be submitted electronically via the provided link, as hard copies of the solicitation and technical drawings are unavailable. Interested and responsible sources are encouraged to submit their quotes by the specified deadline for consideration.

DLA Troop Support

POSTED

5 days ago

DEADLINE

in 8 days

AI Contract Overview

RFQL 5217, titled Heat Recovery Solutions, establishes a qualification process for manufacturers to provide heat recovery products for retrofit projects in New York State. Managed by NYSERDA, the initiative targets commercial, institutional, industrial, and multifamily buildings to improve energy efficacy and economic practicality. Qualified providers will gain access to the New York market, receive technology transfer support, and engage with key stakeholders, including architects and engineers. The qualification process involves an online application and a formal evaluation interview, featuring both technical and market acceptance reviews. This mechanism supports the Heat Recovery Project Development Program Opportunity Notice 5547, which provides funding for project development. The solicitation is open to applicants across all New York State counties with a response deadline of December 31, 2025, and awarded contracts may last up to five years.

General Info

NYSERDA qualification process for heat recovery manufacturers for New York State retrofit projects.

Agency

New York → Nyserda

NAICS

332410 - Power Boiler and Heat Exchanger Manufacturing

Place of Performance

Commercial, Multifamily and Industrial buildings in New York State., All NYS counties, NY, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedFeb 16

Solicitation

Response DeadlineDec 31

Deadline has passed

Submission Closed

12/31/2025, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNew York → Nyserda

Contacts4 people available

OfficeN/A

Organization / AgencyNew York → Nyserda

Office AddressN/A

Contacts

Alexander JahnProject Manager

alexander JahnProject Manager

Venice ForbesAssistant Contract Manager

Jillina BaxterOffice Manager