Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HEATER, PROBE ASSEMB

Active
SPE8E8-26-T-4777Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of six heater probe assemblies with NSN 4540-00-068-1446 under solicitation SPE8E8-26-T-4777, issued by the Department of Defense through Depot Oklahoma. The requirement is set aside entirely for small businesses as defined under FAR 19.5, with a NAICS code of 332913, and responses are due by August 3, 2026. The item must be delivered within 167 days after award to Tinker AFB, Oklahoma, with a postal code of 73145-8000. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements apply, identified by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Packaging must comply with DLA specifications, and any non-accepted supplies must have all government identification removed before return. Primary point of contact for inquiries is Alexis Selby, reachable via email and phone provided.

General Info

Six heater probe assemblies for small business, due August 3, 2026, delivery to Tinker AFB in 167 days.

Agency

Department Of Defense → DEPOT OKLAHOMAView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

SBA

Documents

(1)

SPE8E8-26-T-4777.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPOT OKLAHOMA
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DEPOT OKLAHOMA
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEATER,PROBE ASSEMB
HEATER PROBE ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR NSN/Part Number: 4540-00-068-1446 Quantity: 6 EA Purchase Request: 7017585443QTY: 6 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332913
New
DIBBS
FAUCET, DOUBLE
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
NUT, WELDMENTThe contract pertains to the procurement of a NUT, WELDMENT item identified by NSN 4510-01-345-8948 and part number 6263473-2, with a required quantity of 153 units under solicitation SPE8E8-26-T-4801. The item is classified as a commercial item and a critical application item, subject to CMMC Level 2 cybersecurity self-assessment requirements and the inclusion of technical and quality requirements from the DLA Master List. Mercury and mercury-containing compounds are strictly prohibited in manufacturing or direct contact with the hardware except for specific functional uses like batteries, fluorescent lamps, sensors, and naval-specified reagents, with portable mercury-containing devices needing shock-proof design and secondary containment per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking codes applied. Delivery is FOB origin with a strict 167-day timeline, and inspection and acceptance occur at the destination facility located at DDSP New Cumberland, Pennsylvania. The item must be delivered no later than January 18, 2027, following an original requirement of January 4, 2027, with zero variance allowed in quantity. Transportation and shipping instructions are governed by DLAD procedural notes C19 and C20, and the unit of issue is AY as defined by DoD standards. The contract includes provisions for the removal of government identification from non-accepted supplies and references technical drawings available only during open solicitation via DIBBS.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
FAUCET, DOUBLEThe contract is for the procurement of 38 units of a double faucet with NSN 4510-00-483-5639 under purchase request 7017586143, with a delivery deadline of 167 days after award. The solicitation, numbered SPE8E8-26-T-4779, was posted on July 22, 2026, and bids are due by August 3, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. All supplies must comply with DLA packaging requirements and government identification must be removed from non-accepted items. The contract falls under NAICS code 332913 and is managed by the DLA San Joaquin office under the Department of Defense, with performance location in Tracy, California, 95304-5000. Primary point of contact is Alexis Selby, reachable via email and phone provided.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
FAUCET, SINGLE
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
Federal
45--HEATER,PROBE ASSEMB
DLA Troop Support

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
Component Supply for Hydraulic Kit
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332913
New
DIBBS
Check Valve Supply (NSN 4820-01-538-3340)
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332913
New
DIBBS
Hydraulic Connector Supply (NSN 4730014714128, P/N 6V8633)The contract requires the procurement and delivery of a single military-specification hydraulic connector with part number 6V8633 and national stock number 4730014714128, adhering strictly to DFARS and ANSI X12 compliance standards. The item must be shipped to Fort McCoy, Wisconsin, with a firm delivery deadline of July 28, 2026. This is a subcontract issued under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 332913 for other fabricated metal product manufacturing. The contract does not specify a solicitation number or set-aside type, and no point of contact or detailed office address information is provided. The performance location is limited to Fort McCoy, WI, and the contract is accessible via a DIBBS portal link for official documentation.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332913
New
DIBBS
Precision Brass Valve Manufacturing and AssemblyThe contract entails the manufacture and delivery of four precision lever-operated brass plug cocks featuring 1/8-inch NPTF ports, a two-hole mounting flange, and a handle height of 1-15/16 inches, all produced to exact military drawing specifications and meeting zero-defect critical attributes as defined by MIL-STD-1916. Each unit must adhere to stringent quality standards ensuring dimensional precision, material integrity, and operational reliability under demanding conditions typical of defense applications. The production process must incorporate rigorous inspection protocols and documentation to guarantee compliance with all technical and performance requirements outlined in the military specifications. The contract is classified as a subcontract under the NAICS code 332913, which pertains to other fabricated metal product manufacturing, and is issued by the Defense Logistics Agency on behalf of the Department of Defense. Although the solicitation number and specific point of contact are not provided, the award is linked to the DIBBS portal under contract number SPE7MC26V3692. Performance is expected to meet the high-reliability standards required for military systems, with no tolerance for defects, and all units must be delivered in complete, functional condition ready for integration into defense equipment or systems.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332913
New
DIBBS
HEATER, ANTI-ICINGThe contract is for the procurement of two anti-icing heaters with the NSN/Part Number 4540-01-470-0777, under solicitation SPE8E8-26-T-4774, issued by the Defense Logistics Agency on behalf of the Department of Defense. The item is subject to strict export control regulations under either ITAR or EAR, meaning any dissemination of associated technical data to foreign persons—whether inside or outside the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. Foreign national employees and U.S. subsidiaries are equally restricted under DFARS 252.225-7048. Access to the technical data is limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have been formally approved by DLA authorities. The delivery requirement is urgent, with a five-day ADO timeline, and the solicitation response deadline is August 3, 2026. The NAICS code 332913 identifies the industrial category, and the primary point of contact for inquiries is Alexis Selby, reachable via email and phone provided. The contract emphasizes compliance with DLA packaging and export-control protocols, restricting distribution exclusively to pre-authorized entities. All bidders must meet the specified export-control qualifications to be considered eligible for award, and any failure to adhere to the technical data handling requirements will result in disqualification.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
DRAIN, FLOORThe contract is for 60 units of a floor drain with NSN 4510-00-945-7790, under purchase request 7017575687, with a total required quantity of 210 units to be delivered within 200 days after award. The solicitation is numbered SPE8E8-26-T-4775, posted on July 21, 2026, with responses due by August 3, 2026, and is a total small business set-aside under NAICS code 332913. The placing agency is DLA Dist San Joaquin under the Department of Defense, with performance located in Tracy, California, 95304-5000, and primary point of contact is Alexis Selby at alexis.selby@dla.mil or 3124448487. The item involves technical data subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons, including those within the United States or at foreign subsidiaries of U.S. companies, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program certification, completed DOD export-controlled data training, and cleared by DLA through the online questionnaire are permitted to access the controlled technical data.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
Federal
45--DRAIN,FLOOR
DLA Troop Support

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

NAICS: 333415
New
DIBBS
DRIER, AIR-GAS, DESICCAN
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
HOOD, CHEMICAL-BIOLOGICThe contract pertains to the procurement of 1,238 units of a chemical-biological hood, identified by NSN 4240-01-720-7004, under solicitation SPE8E6-26-Q-0586. This item is classified as a commercial item and is designated as a critical application item, with applicable technical and quality requirements derived from the DLA Master List of Technical and Quality Requirements, which supersede standard commercial packaging guidelines such as ASTM D3951. Packaging must comply with DLA-specific requirements including RP001 and MIL-STD-129 labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if classified as hazardous. The contract specifies a firm fixed price with zero variance allowed in quantity, and delivery is required within 90 days after award date at the origin FOB point. Inspection and acceptance occur at the destination, and all shipments must be delivered to the designated DLA Distribution Depot in Tinker AFB, Oklahoma. The item is subject to Covered Defense Information protocols, and government identification must be removed from non-accepted supplies. The unit of issue is each, with palletization and packaging aligned to DLA standards, and the procurement is tied to purchase request 7015395372 with a required ship date of August 23, 2026.

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
New
DIBBS
PLATE, METAL

POSTED

about 4 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332313
New
DIBBS
PLATE, IDENTIFICATIONThe contract specifies the procurement of 200 identification plates under NSN 9905-01-294-5317 with a delivery requirement of 150 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Documentation for source approval requests must adhere to specified protocols, and covered defense information is subject to strict handling requirements under RD002. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels or AQLs as defined. Technical data associated with the item is subject to export controls under ITAR or EAR, and disclosure to foreign persons—regardless of location—is prohibited without authorization. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the technical data. Drawings are available exclusively during the open solicitation period via the DIBBS portal. The award date is set for July 28, 2026, with Tasha Robinson designated as the primary point of contact.
Plate Work Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, BUTTERFLYThis contract specifies the procurement of a Parts Kit for a Butterfly Valve under solicitation SPE7MC-26-T-144B, with a total quantity of five kits (KT), each identified by NSN 4810-01-535-5367 and vendor part number 80252 from ONTIC ENGINEERING & MANUFACTURING, INC. Delivery is required within 367 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The kit must be packaged and preserved in accordance with MIL-STD-2073-1E, Appendix D, for kits, requiring that all loose hardware be sealed within individual containers using the highest applicable preservation method to prevent corrosion or damage, and must not be shipped in bulk. Each kit must include a detailed parts list with part names, numbers, and quantities. Packaging must comply with MIL-STD-129 for marking, include the special marking instruction “OPEN THIS SIDE,” and be palletized as per DLA’s requirements. The unit of issue is officially KT (Kit) effective October 1, 2014, and all packaging methods must ensure the kit arrives in serviceable condition without requiring downstream sorting. The contract is issued under the Department of Defense through Depot Oklahoma at Tinker AFB under a Total Small Business Set-Aside, with a North American Industry Classification System code of 332911. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced via R and I numbers, and the applicable revision is determined by the solicitation or award date. Preservation and packaging must meet the latest version of MIL-STD-2073-1D to protect the most critical component within the kit, and all components must be securely contained to avoid physical damage such as dents, scratches, or nicks. The contract was posted on July 21, 2026, with a response deadline of August 3, 2026, and primary point of contact is Marisa Thompson at the DLA office. Compliance with these specifications is mandatory to ensure readiness, logistics efficiency, and operational functionality upon receipt.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 484121
New
DIBBS
Transportation and Delivery Coordination (FOB Origin)The contract requires coordination of the shipment of aircraft toilets to the DLA Distribution Depot in Oklahoma under FOB Origin terms, meaning the seller is responsible for arranging and loading the goods at the point of origin, with all subsequent transportation costs and risks transferred to the buyer upon loading. This effort falls under the Department of Defense’s Foreign Distribution and Transportation program, which governs the logistics and delivery of defense-related equipment, ensuring compliance with DoD-specific procurement and shipment standards. The place of performance is designated as Tinker Air Force Base with the ZIP code 73145-8000, indicating the final destination for the cargo after transit. The solicitation is classified as a subcontract and is associated with the NAICS code 484121, which covers truck transportation for agricultural products, suggesting specialized freight coordination may be needed for the movement of these items under defense logistics protocols. The posting date is listed as July 20, 2026, with a response deadline of July 31, 2026, giving potential vendors a short window to submit proposals. The contract is managed by the Department of Defense through depot Oklahoma, and all activities must align with DoD procedural requirements for defense cargo handling and delivery timelines.
General Freight Trucking, Long-Distance, Truckload

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Preservation, and Palletization ServicesThe contract requires the packaging, preservation, and palletization of aircraft toilets in full compliance with military specifications, including ASTM D3951 and DLA RP001, along with other applicable standards. The work must ensure that all units are properly protected against environmental damage during storage and transport, using certified methods for corrosion control, moisture barriers, and secure palletizing to meet Department of Defense requirements. Performance is to be carried out at Tinker Air Force Base with a zip code of 73145-8000, and the contract is classified as a subcontract under NAICS code 561910, which covers other support services. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, and is managed by the Department of Defense through Depot Oklahoma. All proposals must demonstrate technical compliance with the specified standards and the capability to deliver qualified packaging solutions for critical aircraft components.
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and Compliance ServicesThe contract requires the provision of hazard communication labeling and safety data sheets for hazardous components used in aircraft toilet systems, ensuring full compliance with OSHA standards and the Defense Federal Acquisition Regulation Supplement. This subcontract is issued under the NAICS code 541690 and is performance-based at Tinker Air Force Base, with a response deadline of July 31, 2026. The work must adhere to federal regulatory requirements for the identification, classification, and documentation of hazardous materials involved in military aircraft maintenance and support systems, and is managed by the Department of Defense through its Depot in Oklahoma. The deliverables must accurately reflect the chemical hazards present and support safe handling, storage, and disposal procedures as mandated by federal law and defense acquisition policy.
Other Scientific and Technical Consulting Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336412
New
DIBBS
Manufacture and Supply of Aircraft Toilets (NSN: 4510011671057)The contract obligates the vendor to fully manufacture, assemble, test, and deliver five aircraft lavatory units that meet stringent military specifications and Defense Logistics Agency standards, with the National Stock Number 4510011671057. The work must be performed in accordance with DLA requirements, including the proper handling, documentation, and disposition of any units that fail acceptance criteria. The place of performance is designated as Tinker Air Force Base with a zip code of 73145-8000, indicating the operational and logistical context for delivery and integration. The NAICS code 336412 identifies the industry as Aircraft Equipment Manufacturing, aligning the scope with specialized defense aviation component production. This is a subcontract opportunity posted by the Department of Defense through the Depot Oklahoma office, with a response deadline of July 31, 2026, and a posting date of July 20, 2026. The solicitation is accessible via the DIBBS platform, and while no set-aside type is specified, the contract requires strict adherence to defense standards and accountability for non-conforming units. All deliverables must be fully compliant, tested, and ready for integration into military aircraft systems upon delivery, with the vendor responsible for meeting all technical, quality, and logistical demands outlined by the contracting authority.
Aircraft Engine and Engine Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332913
New
DIBBS
TOILET, AIRCRAFTThe contract pertains to the procurement of five aircraft toilets identified by NSN 4510-01-167-1057 for use on Stratolifter C/CK-135 aircraft, with a requirement for removal of government identification from non-accepted supplies. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions determined by the procurement type—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision in effect on the RFP issue date unless amended. The solicitation number is SPE8E8-26-T-4763, posted on July 20, 2026, with responses due by July 31, 2026. The contract is classified under NAICS code 332913 and is issued by the Department of Defense through Depot Oklahoma, with performance located at Tinker AFB, 73145-8000. Delivery is required within 340 days after contract award, and the point of contact is Alexis Selby, reachable via email and phone provided. The procurement is part of a federal acquisition process with no set-aside designation specified.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541512
New
DIBBS
Government Logistics and WAWF Invoicing SupportThe contract centers on providing electronic invoicing and receiving report submission support for government payment processing through WAWF or Invoice 2in1 systems, ensuring timely and accurate financial transactions. This subcontract is specifically set aside for Service-Disabled Veteran-Owned Small Businesses, with the North American Industry Classification System code 541512 indicating it relates to computer systems design and related services. Performance is required at Tinker Air Force Base, Oklahoma, under the oversight of the Department of Defense, specifically through Depot Oklahoma. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, with the official opportunity accessible via the DIBBS platform.
Computer Systems Design Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 325998
New
DIBBS
MIL-STD-129 Packaging and Marking ServicesThe contract requires compliance with MIL-STD-129 standards for the packaging, labeling, and bar-coding of Breather Cloth, ensuring all items are properly marked with the National Stock Number, contract number, and unit of issue information. This is a subcontract under a Service-Disabled Veteran-Owned Small Business Set-Aside, designated under NAICS code 325998, and is managed by the Department of Defense through DEPOT OKLAHOMA. The work must be performed at Tinker Air Force Base, with a delivery address of 73145-8000, and all packaging must meet federal military specifications for traceability and logistical handling. The solicitation is set to close on July 30, 2026, with offers due by that date to secure the award, and the contract is accessible via the DIBBS system under the reference number SPE8E526T3627.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details