Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HEATER, THERMAL, RELE

Active
SPE8E8-26-Q-0467Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense DDSP New Cumberland Facility, is for the procurement of 38 units of thermal release heaters under National Stock Number 4540-00-349-6861. The contract, identified by solicitation number SPE8E8-26-Q-0467, requires delivery within 30 days after receipt of the order. The agreement incorporates specific DLA packaging requirements and technical quality standards as detailed in the DLA Master List. Additionally, the contract includes a provision for the removal of government identification from any supplies that are not accepted. The primary point of contact for this federal acquisition is Elizabeth Macarthur.

General Info

DoD procurement of 38 thermal release heaters delivered within 30 days.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE8E8-26-Q-0467.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUSA
Contacts
Elizabeth Macarthur
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEATER,THERMAL,RELE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
DRS POWER & CONTROL TECHNOLOGIES, INC.
MILWAUKEE<(>,<)> WI
ADEQUATE DATA FOR NSN/Part Number: 4540-00-349-6861 Quantity: 38 EA Purchase Request: 7016178576QTY: 38 Delivery: 30 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
SLED
SPSV - Remington Magazines
Solicitation # SRC0000035609
The Alabama Department of Corrections, Special Services, has issued solicitation SRC0000035609 for the procurement of Remington Magazines. This SLED organization opportunity is based in Alabama and is managed by primary point of contact Niketta Jeans. The solicitation was posted on August 24, 2026, and requires a response by the deadline of August 27, 2026. Interested parties can find further details and submission guidelines through the Alabama Buys portal.
Department Of Corrections, Special Services

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
DIBBS
ADAPTER ASSEMBLY, RECO
Solicitation # SPE7L1-26-T-02A0
This solicitation from the Department of Defense Land Supply Chain is for the procurement of three Recoil Adapter Assemblies under NSN 1005-01-029-9288. The contract requires delivery within 164 days after order and is subject to strict technical and quality requirements as defined in the DLA Master List. Compliance includes adherence to specific packaging standards, configuration change management, and inspection and acceptance at origin. The contract involves significant security and regulatory constraints, including demilitarization requirements for small arms parts and the protection of covered defense information. Contractors must meet CMMC Level 2 self-assessment and third-party assessment standards. Additionally, the item is subject to ITAR and EAR export controls, requiring approved US/Canada Joint Certification Program certification and specific training to access technical data.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
SHIELD ASSEMBLY, PRO
Solicitation # SPE7L1-26-T-945F
The contract solicitation SPE7L1-26-T-945F seeks the procurement of 19 units of the SHIELD ASSEMBLY, PRO, a critical gun part item subject to stringent technical, quality, and export control requirements. Deliveries are due 165 days after award, with inspection and acceptance to occur at the manufacturer’s facility by the Defense Contract Management Agency Quality Assurance Representative, and product verification testing may be invoked prior to each shipment, requiring five samples from each subcontractor, one of which may be destroyed during testing. The item is classified as a defense article under the International Traffic in Arms Regulations, mandating registration with the Directorate of Defense Trade Controls and compliance with export control provisions under DFARS 252.225-7048, including restrictions on the handling and disclosure of technical data to foreign persons regardless of location. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements and incorporate specifications from AWS D1.1/D1.3M for welding and coating, with manganese coating required over zinc where an option exists. Phosphate coating suppliers must be certified, and the use of ozone-depleting chemicals is strictly prohibited. Packaging and marking must conform to MIL-STD-2073-1E, MIL-STD-129 with UHF RFID and 2D DataMatrix barcodes, and DLA’s RP001 requirements, with no certificate of conformance permitted. All offerors must be small businesses under a total small business set-aside with NAICS code 332994, and entities must maintain an active Unique Entity ID and CAGE code. Cybersecurity compliance is mandated at CMMC Level 2, with the contractor required to be certified by a C3PAO and comply with safeguarding requirements per DFARS 252.204-7012 and 252.204-7018. Contract clauses address employment eligibility, combating human trafficking, sustainable products, hazardous materials handling, whistleblowing rights, and electronic invoice submission through WAWF. Configuration changes require formal engineering change proposals and PCO approval, and the use of any unauthorized subcontractor or deviation from qualified manufacturer or product lists is prohibited. The contractor must submit the identity of the actual manufacturer and phosphate contractor for inclusion in the award, and any subsequent changes to these entities require formal modification. Export-controlled technical data may only be accessed by contractors with approved US/
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332994
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L1-26-T-01Z6
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-01Z6, is for the procurement of 17 units of Aft Feeder Sprockets, identified by part number 0001S00000052. The contract specifies a delivery timeline of 503 days after the order is placed, with performance located at Hill AFB. The agreement is subject to stringent technical and quality requirements, including CMMC Level 2 cybersecurity assessments and specific DLA packaging and marking standards. Due to the nature of the items, the contract mandates strict adherence to demilitarization protocols for small arms parts and rigorous export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
COVER, GUN PORT SHIELD
Solicitation # SPE7L1-26-T-01X4
This contract is for the procurement of four gun port shield covers, identified as critical gun parts with unique requirements. The items must conform to specific source control drawings and technical data packages, with 6061-T6 listed as an acceptable alternate material for AA5052-H34. The agreement prohibits the use of class I ozone depleting chemicals and the intentional addition of mercury, except in specific authorized cases. The contract mandates that product inspection be conducted by a Quality Assurance Representative at the actual manufacturer's facility, and the manufacturer's identity must be submitted to the contracting officer. Product Verification Testing may be invoked, requiring samples from each subcontractor. Delivery is set for five days after order, with inspection and acceptance occurring at the origin. Shipping is directed to the General Depot of Naval Supplies in Kaohsiung City, Taiwan.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
RACK, STORAGE, SMALL
Solicitation # SPE7L3-26-T-201J
This contract, identified as solicitation SPE7L3-26-T-201J, is for the procurement of one small storage rack, part number X1-100-36, provided by Dasco Storage Solutions Ltd. The item is associated with NSN 1095-01-646-1157 and is being acquired by the Department of Defense under the agency Land Supplier Opns Vehicle Spt. The required delivery date is November 16, 2026, with a delivery window of 76 days after order. The shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements (RP001), marking standards (MIL-STD-129), and specific packaging data (MIL-STD-2073-1E). Additionally, the agreement includes requirements for demilitarization of small arms weapons parts and the removal of government identification from any non-accepted supplies.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332994
New
DIBBS
KNIFE, COMBAT
Solicitation # SPE7L3-26-T-168D
The contract solicits the procurement of 15 combat knives, model 9070BK manufactured by Benchmade Knife Co., Inc., with the National Stock Number 1095-01-721-4255, under solicitation SPE7L3-26-T-168D. Delivery is required within 10 days of contract award, with FOB Origin terms, and all items must be shipped to Hunter AAF, Georgia, using the fastest traceable means, explicitly prohibiting parcel post. Packaging must meet ASTM D3951 standards, with palletization and all labeling strictly following DLA Packaging Requirements (RP001) and MIL-STD-129, and all technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence over any other standard. Supply chain traceability documentation must be retained per DLA Directive Procurement Notes #C03, though Item Unique Identification is waived per customer request. The product is subject to stringent safeguards under FAR and DFARS clauses, including safeguarding covered defense information, compliance with NIST SP 800-171, prohibition of hexavalent chromium, and restrictions on telecommunications equipment from sanctioned entities. Offers must be submitted via DIBBS by August 20, 2026, and failure to submit a required Safety Data Sheet or inclusion of additive manufactured components will result in disqualification. Payment must be processed through WAWF, requiring contractor registration in SAM and WAWF systems. The solicitation applies HUBZone price evaluation preferences and mandates representations regarding small business status, employment eligibility, trafficking in persons, and avoidance of prohibited materials and suppliers. All contract performance is subject to destination inspection under FAR 52.246-2, and the contracting officer is Katelyn Young of DLA Land and Maritime, with full compliance required under all incorporated clauses including cyber incident reporting, whistleblower protections, ethical compensation of former officials, and hazardous materials labeling in accordance with OSHA and other applicable statutes.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332994
New
DIBBS
MOUNT, RESILIENT, WEAPON
Solicitation # SPE4A7-26-T-688P
This solicitation, issued by the Department of Defense under the agency ASC Supplier OE and AF Div, is for the procurement of seven resilient weapon system mounts, identified by NSN 5342-01-335-9362. The contract requires delivery within 163 days after the order is placed. The place of performance is located in New Cumberland, Pennsylvania, and the solicitation is categorized under NAICS code 332994. The agreement includes strict technical and quality requirements, including CMMC Level 2 certification and specific DLA packaging and marking standards. Notably, the contract is subject to rigorous export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
SLED
Hose Supply for Transit VehiclesThis subcontract involves the procurement of essential hoses for transit vehicle systems, specifically focusing on the supply of coolant, air, and hydraulic hoses. Managed by the Ohio Inventory agency, the contract is categorized under NAICS code 332994, which pertains to rubber product manufacturing. The procurement process is designed to support the maintenance and operational integrity of transit bus systems through the provision of these specialized components. The solicitation was posted on August 24, 2026, with a very brief response window, establishing a deadline for submissions by August 25, 2026, at 3:00 PM. Interested parties can access further details and manage their responses through the designated procurement portal. This contract serves as a critical supply link for transit infrastructure, ensuring that necessary hydraulic and cooling components are available for vehicle fleets.
Inventory

POSTED

about 20 hours ago

DEADLINE

in about 4 hours
View Details
NAICS: 332994
New
Federal
Precision Machining of Fluid Valve Stem ComponentsThe Department of Defense, through the Navsup Weapon Systems Support Mech, is seeking a subcontractor for the precision machining of high-integrity fluid valve stem components. This project requires strict adherence to military specifications, emphasizing a zero-defect standard and the maintenance of full traceability for all manufactured parts. The opportunity is categorized under NAICS code 332994. Interested parties must submit their responses by the deadline of September 4, 2026, at 8:30 PM.
Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
Federal
Precision Welding and Brazing for Piping and Pressure VesselsThe Precision Welding and Brazing for Piping and Pressure Vessels subcontract is issued by the Department of Defense through the Navsup Weapon Systems Support Mech. The project requires the performance of welding and brazing on military-grade piping and pressure vessel systems, ensuring all work strictly adheres to naval standards. This includes the delivery of necessary procedure qualification and certification documentation. The opportunity is categorized under NAICS code 332994 and was posted on August 24, 2026. Interested parties must submit their responses by the deadline of September 21, 2026, at 8:30 PM.
Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

in 27 days
View Details
NAICS: 332994
New
Federal
Gun Cradle Assembly
Solicitation # SPRDL1-24-R-0095
This contract pertains to the procurement of the Gun Cradle Assembly, with an initial quantity of 42 units, which has been increased to 51 units through Amendment 0001. The item is identified by NSN 1005-01-664-7894 and part number 7-317226202-7, produced by The Boeing Company under CAGE code 8V613. The assemblies are to be delivered in Military B packaging, with FOB origin terms. The contract is managed by the DLA Land Warren office of the Department of Defense, located in Warren, Michigan. The solicitation, numbered SPRDL1-24-R-0095, was posted on August 26, 2025, and the deadline for proposal submissions has been extended to September 25, 2025, at 21:00 hours. Interested vendors are advised to review the attached solicitation and amendment documents for detailed instructions on proposal submission. The contract falls under NAICS code 332994, indicating its classification within the manufacturing of ordnance and accessories. The primary point of contact for inquiries is John P. Moses, reachable via email or phone.
DLA Land Warren

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-224K
This solicitation, numbered SPE7MC-26-T-224K, is issued by the Department of Defense for the procurement of eight valve disks under NSN 4820-01-406-2282. The contract requires delivery within 101 days after receipt of the order, with the place of performance located in New Cumberland. Responses to this solicitation are due by September 4, 2026. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with these items is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-221T
This contract is a total small business set-aside solicitation for the procurement of 15 valve seats used in turbine-driven fan ventilation steam systems. The items are identified by NSN 4820-00-956-1477 and correspond to several Steward Machine Co Inc part numbers, including 591-607, 60-591PC607, and 60-773PC607. This is designated as a critical application item with a required delivery date of November 24, 2025, and a delivery timeline of 57 days after order. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129, with delivery set as FOB Origin and inspection and acceptance occurring at the destination. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Shipments are to be delivered to the DLA Distribution New Cumberland facility in Pennsylvania.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, STOP-CHECK
Solicitation # SPE7MC-26-T-224N
This contract is for the procurement of five stop-check valves, identified by NSN 4820015123988 and Milwaukee Valve Co part number 1042-001J 600. The solicitation, numbered SPE7MC-26-T-224N, specifies a delivery timeframe of 164 days after order, with a required delivery date of April 30, 2028. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Additionally, the contract notes that casting or forging may be required for manufacture, and contractors may need to submit a Casting and Forging Assistance Request if special tooling is unavailable.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-223C
This contract is for the procurement of 201 units of a check and relief valve, identified by NSN 4820001526195, for use in Detroit Diesel Mode 3-53, 6V53T engines. This is a critical application item with specific technical requirements, including an operating temperature range from minus 65 to 200 degrees Fahrenheit and precise pressure and air flow specifications. Manufacturing may require specialized casting or forging tooling, for which the government may not provide assistance. The solicitation is set aside for Women-Owned Small Businesses and requires delivery to the DLA Distribution New Cumberland facility in Pennsylvania. The contract specifies a delivery timeframe of 141 days, with a required delivery date of November 15, 2025. All supplies must adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, and must comply with the DLA master list of technical and quality requirements.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-224J
This contract is for the procurement of two valve disks, identified by NSN 4820013810297 and associated with Emerson Automation Solutions. This is a restricted source item and a critical application item that requires engineering source approval by the government design control activity. The procurement is governed by technical and quality requirements set forth in the DLA Master List, with specific prohibitions against the use of Class I ozone depleting chemicals and the intentional addition of mercury or mercury containing compounds, except for specific functional exceptions. The delivery is set for FOB Origin with inspection and acceptance also occurring at the origin. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific oxygen clean packaging and marking requirements. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of November 29, 2028, and a need ship date of February 16, 2027.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333415
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-2165
This contract is for the procurement of two nickel-chromium alloy metal sheets, specifically Inconel 625 cold rolled solid, with dimensions of 0.040 inches thick, 48.00 inches wide, and 120.00 inches long. The material must strictly adhere to the specified dimensions, and test coupons are not permitted. Compliance with SAE AMS5879F and SAE AMS2807C standards is required, and the supplier must provide a Certificate of Quality Compliance with every shipment. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates rigorous marking requirements, including the contract delivery order number, NSN, and manufacturer details, using waterproof stamping or stenciling. Delivery is required within 65 days to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with packaging following MIL-STD-2073-1E and RP001 standards to ensure robust material protection.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-187B
The contract is for the procurement of 202 units of a check valve identified by NSN 4820-01-231-6654 and part number 8KK352 from OSHKOSH DEFENSE LLC, classified as a critical application item. The valve must meet a thermal relief set pressure of 3000 PSI plus or minus 200 PSI and operate at a maximum temperature of 180 degrees Fahrenheit. All supplies must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the version effective on the award date controlling. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents; portable devices containing mercury must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. The item must be packaged in accordance with ASTM D3951 and labeled and palletized per MIL-STD-129 and RP001 DLA Packaging Requirements, with hazardous material containers labeled per the Hazard Communication Standard (29 CFR 1910.1200). A Safety Data Sheet is required prior to award, and failure to submit it will render the offeror nonresponsible and ineligible. Delivery is due 188 days after order date, FOB Origin, to the DDSP New Cumberland Facility in Pennsylvania, with destination inspection and acceptance governed by FAR 52.246-2. Payment must be processed electronically through WAWF in accordance with DFARS clauses 252.232-7003 and 252.232-7006. The solicitation incorporates numerous FAR and DFARS clauses addressing cybersecurity, whistleblower rights, labor standards, export control, prohibited materials like hexavalent chromium and covered telecommunications equipment, and compliance with NIST SP 800-171. The procurement is a small business set-aside with HUBZone price evaluation preference applied, and quotes must be submitted via the DIBBS portal by the closing date, with offerors encouraged to provide quantity ranges due to demand variability.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 336611
New
DIBBS
SLEEVE, DIRECTIONAL CON
Solicitation # SPE7MC-26-T-223W
This contract is for the procurement of one directional control linear valve sleeve, identified by NSN 4820012161592 and associated with Vacco Industries part numbers S1E10106 and S2E10134-6NA. The item is designated as a critical application item and must adhere to strict quality control standards, including NAVSHIPS 0948-045-7010 for submarine safe items and Item Unique Identification requirements per MIL-STD-130. Delivery is required within 164 days, with a need ship date of February 16, 2027, and a final required delivery date of April 23, 2028, to the DLA Distribution New Cumberland facility. The agreement mandates rigorous compliance with cybersecurity and environmental regulations, specifically requiring a CMMC Level 2 Self-Assessment and the protection of covered defense information. There is a strict prohibition against the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except in specific NAVSEA-approved functional applications. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, ensuring all government identification is removed from non-accepted supplies.
Ship Building and Repairing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-224B
This contract is for the procurement of 12 valve disks under solicitation SPE7MC-26-T-224B for the Department of Defense. The items are identified by NSN 4820-01-262-2427 and are classified as critical application items based on Technical Data Package Revision A, Generation 1, and drawing 16236 RE-012622427. Delivery is required within 164 days, with an original required delivery date of November 30, 2026, and a need ship date of February 16, 2027. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129, with specific instructions for bag fabrication per MIL-B-117. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Shipping is FOB Origin, with the final destination being the DLA Distribution New Cumberland facility in Pennsylvania.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-2161
This contract is for the procurement of 25 sheets of high magnesium aluminum alloy metal, specifically Alloy 5086 Temper H116. Each sheet must measure 0.125 inches thick, 48 inches wide, and 96 inches long, with a reference weight of 55.3 lbs per sheet. The material must strictly conform to the specified dimensions, and test coupons are not permitted. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contractor must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and adhere to rigorous marking requirements, including the DLA contract delivery order number, NSN, and manufacturer details. Packaging and preservation must comply with ASTM B660 and MIL-STD-129 standards, with delivery scheduled for the DLA Distribution DDSP New Cumberland facility.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4928
This contract is a solicitation for the procurement of one power supply unit, identified by NSN 6130017008313 and part number FXPWS0286. The item is designated as a critical application item and is associated with Hexagon US Federal, Inc and Bart and Associates, LLC. The delivery is required within 164 days, with an original required delivery date of January 29, 2027, and a need ship date of February 16, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement mandates strict adherence to technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking. Quality assurance is governed by specific sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance in certain instances. Additionally, the contract incorporates requirements for the removal of government identification from non-accepted supplies and the handling of covered defense information.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-224A
This contract is for the procurement of 142 check valves, identified by NSN 4820-01-231-6654 and Oshkosh Defense LLC part number 8KK352. These critical application items must feature a thermal relief set pressure of 3000 PSI plus or minus 200 PSI and a maximum operating temperature of 180 degrees Fahrenheit. The agreement strictly prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. The order is designated as a total small business set-aside under solicitation SPE7MC-26-T-224A. Delivery is required within 315 days, with a need ship date of July 17, 2027, and a final delivery date of July 25, 2027. Supplies must be shipped FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA master list technical and quality requirements.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details