Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

HEATER, WATER, ELECTR

Awarded

SPE8E8-26-T-4137Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the procurement of two water heaters, NSN 4410014107983, to be delivered to DLA Distribution San Diego within 167 days after award. Only approved sources, specifically identified by part numbers 74924 720-31753-22 and 74924 723XQ0999, are eligible to respond. This is a combined solicitation issued as a request for quotation with no hard copies available; all submissions must be submitted electronically. The opportunity is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, classified under NAICS code 332410. The solicitation number is SPE8E826T4137, posted on June 10, 2026, with quotes due by June 22, 2026. No specifications, plans, or drawings are provided, and all responsible sources may submit a quote if received on time. The point of contact for inquiries is listed via email, with further details accessible through the SAM.gov solicitation link or the DIBBS website using the solicitation number. The contracting office is located in Philadelphia, Pennsylvania, under the Department of Defense’s DLA Troop Support.

General Info

Electric water heaters ordered via RFQ for SDVOSB, delivery due in 167 days, SAM.gov submissions only.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332410 - Power Boiler and Heat Exchanger ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(2)

SPE8E8-26-T-4137.pdf

PDF

SPE8E9-26-P-1319 - Order for Supplies or Services

PDF•award

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedJun 10

Combined Synopsis

Type ChangedJun 10

Combined Synopsis → Solicitation

AwardedSep 12

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUSA

Contacts

Alexis Selby

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE8E926P1319 posted on DIBBS. Awardee: VETERANS AEROSPACE LLC (CAGE 9DMG2) Total Contract Price: $38,550.00 Award Date: 08-19-2026 Solicitation: SPE8E8-26-T-4137 Line items: - HEATER, WATER, ELECTR (NSN/Part 4410014107983, PR 7017122139)

Similar Contracts

Same NAICS industry code

Aluminum Alloy Tubing Supply

FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturing of Forged Tube Elbows (NSN 4730-00-008-9847)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Aluminum Frame/Hardware Fabrication

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Rigid Connecting Link Forging and Fabrication

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Secure Deployment Packaging and Crating

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

Custom Transportation Fixtures and Protective Packaging

Commanding Officer

POSTED

DEADLINE

HEAT EXCHANGER,FLUI — 1660014545010 — N0038326QBA92

Solicitation # NO0383-26-Q-BA92

This solicitation, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the teardown, evaluation, repair, and modification of fluid heat exchangers (NSN 1660-01-454-5010). The contractor is responsible for providing all necessary facilities, labor, materials, and tooling to return the items to a Ready For Issue condition, as the government will not provide manufacturing aids or special test equipment. Key technical requirements include the prohibition of MIL-W-81381 wire in favor of SAE-AS22759 series wire and compliance with ISO 9001/SAE AS9100 quality standards and ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. The contract specifies a delivery window of 90 days with FOB Destination terms and requires packaging and marking in accordance with MIL-STD-2073 and MIL-STD-129. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will involve the Supplier Performance Risk System to assess item, price, and supplier risk. The contractor must manage specific repair categories, including Beyond Economical Repair, Missing on Induction, and Over and Above Repair, all of which require written concurrence from DCMA and the Procuring Contracting Officer. All invoicing and payment requests must be processed through Wide Area Workflow. The solicitation is designated as a DX rated order for national defense and incorporates various FAR and DFARS clauses regarding hazardous materials, the Buy American Act, and cybersecurity safeguarding.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

Trunnion Fitting Forging and Tooling

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Twist Drill (NSN 5133016921546)

Defense Logistics Agency

POSTED

DEADLINE

Supply of Electrical Connector Backshells (NSN 5935-01-219-5462)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L0-26-Q-0317

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L0-26-Q-0317 for the procurement of eight rail clamps. The items are identified by NSN/Part Number 2590-00-443-4856 and are associated with purchase request 7015188146. This federal solicitation was posted on September 9, 2026, with a response deadline set for September 17, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Reciprocating Compressors (NSN 4310-013615075)

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 16 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 16 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, specifically NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). This is a restricted source item requiring government engineering source approval and is designated as a critical application item. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. The items are to be delivered to locations in Warrenton, Oregon, and Schofield Barracks, Hawaii. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Due to the nature of the supplies, the contractor must adhere to hazardous material identification and shipping standards, including IP025 and FAR 52.223-3, and provide a Material Safety Data Sheet. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to all solicitation requirements.

Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

This contract is a firm fixed price solicitation from the Defense Logistics Agency for one maintenance-free sealed lead-acid type I storage battery, part number APCRBC133 by Schneider Electric IT Corporation. The item has a non-extendable shelf life of 12 months and must be delivered within 60 days after order. Inspection and acceptance will occur at the origin, with shipping destined for the USS Harvey C Barnum Jr. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract includes hazardous material communications regarding mercury restrictions and specifies that the battery must meet nonspillable criteria under 49 CFR 173.159 to qualify for specific transportation exceptions across land, sea, and air.

Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

POSTED

about 16 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of four decals, identified by NSN 7690-01-262-9486 and Boeing part number BACM9L10AVM. This is a Foreign Military Sales requirement for Greece, with delivery required within five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Inspection and acceptance will occur at the point of origin, and the final delivery destination is Mechanicsburg, Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including required shelf-life labels. Palletization must comply with RP001, and the use of plastics for wrapping or cushioning should be avoided where possible. Technical and quality requirements are governed by the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and the safeguarding of covered defense information. All quotes must be submitted via the DIBBS portal, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized.

Commercial Printing (except Screen and Books)

POSTED

about 16 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency Land and Maritime is soliciting quotations for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369, under solicitation SPE7L7-26-Q-2417. The required delivery timeframe is 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be determined based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. This contract carries stringent security and regulatory requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, the items are classified as hazardous materials, requiring the submission of Material Safety Data Sheets and certification via HAZDEC forms in accordance with FED STD 313D. Packaging and marking must adhere to MIL-STD-2073-1E Level B (Pack Code Q) and MIL-STD-129. Inspection and acceptance will occur at the origin, with DCMA inspection limited to kind, count, and condition. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS