Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Heavy-Duty Industrial Caster Supply

Open

Federal

Response Deadline11/13/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, managed by the Department of Defense under the Subsistence FSE Supply Chain, requires the provision of heavy-duty industrial casters for prime contractors fulfilling DLA supply contracts. The scope of work involves delivering 16 swivel casters and 16 fixed casters, specifically configured as two 5-inch swivel and two 8-inch fixed casters per unit. These components must be engineered to support a combined load of 1,000 lbs and maintain compatibility with NSF standards for use in medical and food environments. The project is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332999, with the place of performance located at Fort Hood. Interested parties must adhere to a tight timeline, with the solicitation posted on November 9, 2026, and a response deadline of November 13, 2026.

General Info

Agency

Department Of Defense → SUBSISTENCE FSE SUPPLY CHAIN

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing

Place of Performance

FORT HOOD, TX, 76544-0000, USA

Set-Aside

SDVOSBC

Documents

This scope was carved out of SPE3SE-27-T-0133.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

UTILITY CART

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 9

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 11:00:00 AM CSTin 2 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SUBSISTENCE FSE SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → SUBSISTENCE FSE SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies heavy-duty industrial casters for prime contractors delivering DLA supply contracts. Provides two 5-inch swivel casters and two 8-inch fixed casters per unit, engineered to support a combined 1,000 lb load. Components must be compatible with NSF standards for food and medical environments. Delivers 16 swivel and 16 fixed casters.

Similar Contracts

Same NAICS industry code

Conversion Coated Aluminum Blank SupplyThis subcontract for the City of Greensboro involves the supply of pre-treated .080 gauge aluminum blanks intended for prime contractors. The scope of work requires the application of a chemical conversion coating to the surfaces of the blanks to ensure corrosion prevention and proper sheeting adhesion. All materials and processes must strictly adhere to ASTM B-921 or ASTM B-449 standards, with the final coated blanks delivered directly to the fabricator. The opportunity was posted on November 10, 2026, with a response deadline of November 13, 2026. Classified under NAICS code 332999, this procurement supports infrastructure or municipal projects within North Carolina. Interested parties must coordinate delivery and technical compliance according to the specified industry standards to meet the project requirements.

City of Greensboro

POSTED

about 10 hours ago

DEADLINE

Manufacturing of TEE, PIPE TO BOSS (NSN 4730014851708)This subcontract involves the manufacture of 22 pipe-to-boss tee fittings under NSN 4730014851708 for the DLA Weapons Support Maritime Supply Chain. The selected contractor is responsible for fabricating the units in strict accordance with provided technical data and specifications, ensuring all finished components are fully inspected prior to delivery. To qualify, the manufacturer must maintain a quality management system compliant with either SAE AS9003 or ISO 9001 standards and adhere to all Buy American regulations. The project falls under NAICS code 332999, with the place of performance located in Tracy, California.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

Fluid Pressure Filter Parts Kit SupplierThis subcontract opportunity is for the supply of 74 Fluid Pressure Filter Parts Kits under NSN 4330-01-218-5891 to support prime contractors for the Department of Defense DLA Weapons Support Maritime Supply Chain. The selected supplier is responsible for manufacturing or sourcing all components in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. The contract is designated as a Total Small Business Set-Aside under NAICS code 332999. Compliance requirements are stringent, necessitating US/Canada Joint Certification Program approval, adherence to ITAR and EAR regulations, and the implementation of CMMC Level 2 and NIST SP 800-171 cybersecurity standards. Responses are due by November 20, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

Supply of Specialized Pin Stock/AlloyThis subcontract involves the supply of specialized pin stock and alloy for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the sourcing and delivery of wire, rod, or bar stock that adheres to the specific chemical and physical properties outlined in the DLA Master List for NSN 5315-01-242-0898. To maintain strict aerospace and defense standards, the provider must supply Mill Test Reports and deliver certified raw material stock directly to the manufacturer. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract is categorized under NAICS code 332999. The place of performance is located in Anniston, Alabama. Interested parties must adhere to the timeline established by the posting date of November 10, 2026, with a response deadline set for November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Reed Valve Manufacturer/Supplier (NSN 4310-01-456-2989)This subcontract involves the manufacture or procurement of 73 Reed Valves for the DLA Weapons Support Maritime Supply Chain. All units must strictly adhere to NSN 4310-01-456-2989 specifications and be produced without the intentional use of mercury. To ensure regulatory compliance, all materials used must be compliant with the Buy American Act. The contractor is responsible for packaging, marking, and palletization in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Once processed, the 73 units must be delivered to DLA Distribution DDSP New Cumberland. This requirement falls under NAICS code 332999 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

Precision Valve Component ManufacturingThis subcontract for Precision Valve Component Manufacturing involves the production of precision-machined valve components for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer must produce components that strictly adhere to Parker Hannifin P/N 1475-574524 specifications for Critical Application Items, with quality inspections conducted according to MIL-STD-105/ASQ Z1.4. Deliverables consist of individual components intended for kitting, with performance taking place in New Cumberland. To qualify, the provider must maintain ISO 9001:2015 certification and have completed a CMMC Level 2 self-assessment to ensure the secure handling of Covered Defense Information. This opportunity falls under NAICS code 332999 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

Manufacture of Helical Compression Spring RetainersThis subcontract involves the precision manufacture of five helical compression spring retainers for the DLA Weapons Support Land Supply Chain. The project requires the fabrication of components to NSN 5340-01-479-3915 technical and quality specifications using CNC lathes and mills. All work must strictly adhere to dimensional tolerances and the DLA Master List of Technical and Quality requirements, with a specific prohibition on the use of mercury. The contract is categorized under NAICS code 332999 and is managed by the Department of Defense. Performance of the work is designated for New Cumberland, Pennsylvania. Interested parties must respond by November 20, 2026, to meet the established deadline for this procurement effort.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

Precision Spring ManufactureThis subcontract involves the manufacture of precision springs for prime contractors supporting DLA land vehicle projects. The work requires the fabrication of springs according to Drawing 8379626, with a specific modification requiring a total compression of .380 inches rather than the 5/16 inch specified in the drawing. Due to the technical nature of the components, the contractor must utilize specialized spring winding and heat-treating equipment to ensure all finished products meet the required specifications. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 20, 2026, for this requirement categorized under NAICS code 332999.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

Metal Casting/Forging for Crank AssemblyThis subcontract involves the metal casting or forging of crank assembly components to support DLA land vehicle projects. The selected provider will manufacture rough or semi-finished parts using 4340 Casting per MIL-S-22141, adhering strictly to TDP Rev A Gen 1 and Reference Drawing NR 19207 8376604 Revision G. Responsibilities include the creation and management of all necessary casting tooling. Eligible contractors must hold SAE AS9003 or ISO 9001 certification and maintain full ITAR and EAR compliance. The work is associated with the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance located in New Cumberland. Responses are due by November 20, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

Supply of Cam Locks (NSN 5342-01-004-9379)This subcontract involves the supply of 10 cam locks, identified by NSN 5342-01-004-9379, for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The provider is responsible for manufacturing or sourcing the locks in strict accordance with the DLA Master List technical requirements. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331, while packaging and labeling must adhere to ASTM D3951, RP001, and MIL-STD-129 standards. Execution of this contract requires the use of precision metal fabrication equipment and mandatory compliance with NIST SP 800-171 security standards. The place of performance is located in Yakima, Washington. Interested parties must respond by November 17, 2026, under NAICS code 332999.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

Manufacturer of Straight Tube-to-Hose AdaptersThis subcontract involves the manufacture and supply of 474 steel straight tube-to-hose adapters for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The adapters must be fabricated in strict accordance with SAE J516-2021 Revision D and TDP Rev B Gen 2 to ensure full compatibility with SAE 100R5 hoses. Quality assurance must meet MIL-STD-1916 or ASQ H1331 standards, and the manufacturing process is strictly prohibited from using Class I ozone-depleting chemicals. The project is managed under the Department of Defense with performance taking place in Albany. Interested parties should note the response deadline of November 20, 2026. The contract falls under NAICS code 332999, focusing on specialized fabrication to meet rigorous military and industrial fluid handling specifications.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 12 hours ago

DEADLINE

Supply of Floor Drain Units (NSN 4510-014398922)This subcontract involves the supply of specialized floor drain units matching NSN 4510-014398922 for prime contractors working on Defense Logistics Agency Troop Support projects. The contractor is responsible for manufacturing or sourcing two units that are mercury-free and strictly adhere to the Buy American Act and Berry Amendment. All deliverables must meet RP001 packaging requirements and comply with MIL-STD-129 and MIL-STD-2073-1E marking standards. The final products are to be delivered to the USNS Miguel Keith located in San Diego, California. This procurement falls under NAICS code 332999 and is managed through the Department of Defense. Interested parties should note the response deadline of November 13, 2026.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → SUBSISTENCE FSE SUPPLY CHAIN

Same awarding agency

Hot Food Well Unit SupplierThis subcontract involves the supply of two finished Hot Food Well units for prime contractors supporting the Department of Defense DLA Troop Support Subsistence FSE Supply Chain. The units must strictly adhere to NSN 7310-01-478-3538 and the DLA Master List of Technical and Quality Requirements. Additionally, the supplier is required to ensure full compliance with the Buy American Act and the Berry Amendment. Logistical requirements include packaging according to RP001 and marking in accordance with MIL-STD-129 and MIL-STD-130N. The final delivery of the units is designated as FOB Destination to the USS Hershel Williams T-ESB 4. This procurement falls under NAICS code 423440 and is managed through the Subsistence FSE Supply Chain agency.

Other Commercial Equipment Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Mechanically Cooled Beverage Dispenser SupplierThis subcontract involves the supply of mechanically cooled beverage dispensers, specifically Grindmaster Corp part number D25-3 base and bowl sets, for prime contractors working on Department of Defense DLA Troop Support Subsistence FSE Supply Chain projects. The supplier is required to deliver fully assembled dispenser sets within 30 days of receiving an order, ensuring all products are mercury-free and compliant with Buy American standards. Strict adherence to packaging and marking regulations is mandatory, including compliance with ASTM D3951, MIL-STD-129, and MIL-STD-130N, which includes the application of Unique Item Identifiers. The contract falls under NAICS code 423440 and is managed through the Subsistence FSE Supply Chain agency.

Other Commercial Equipment Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

DISPENSER, BEVERAGE, MEC

Solicitation # SPE3SE-27-Q-5010

This contract, issued by DLA Troop Support Subsistence FSE Supply Chain under solicitation SPE3SE-27-Q-5010, is a Simplified Indefinite-Delivery Contract (SIDC) for the procurement of one mechanically cooled beverage dispenser (NSN 7310-01-386-5951). The requirement is for a commercial off-the-shelf item, specifically a Grindmaster Corp part number D25-3, consisting of a base and a bowl that together form a set. The contract is a Firm Fixed Price agreement with a total estimated value of 350,000.00 dollars, though the specific line item quantity is one unit. Delivery is required within 30 days after order (ADO), with the point of inspection and acceptance set at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with specific labeling requirements for the base and bowl components. All items must be marked in accordance with MIL-STD-130N, and unique item identifiers (UID) must be provided for items meeting the cost threshold or specific schedule requirements, reported via the Wide Area Workflow (WAWF) system. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Compliance with various FAR and DFARS clauses is required, including the Buy American and Balance of Payments Program, cybersecurity safeguarding for covered defense information, and the prohibition of certain procurements from the Xinjiang Uyghur Autonomous Region.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE3SE-27-T-0134

Solicitation SPE3SE-27-T-0134, issued by the DLA Troop Support Subsistence FSE Supply Chain, is for the procurement of two Hot Food Well units under NSN 7310-01-478-3538. The contract requires delivery within 20 days after order, with shipping terms set as FOB Destination to the USS Hershel Williams T-ESB 4. Inspection and acceptance will occur at the destination per FAR 52.246-1. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The contractor must adhere to strict technical and quality requirements defined in the DLA Master List, which takes precedence over ASTM D3951 packaging standards. All packaging must comply with RP001 and be marked according to MIL-STD-129 and MIL-STD-130N. The contract prohibits the intentional addition of mercury or the use of Class I ozone-depleting substances. Furthermore, the award is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. All quotes must be submitted via the DIBBS portal and include a realistic delivery schedule.

Food Product Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

FREEZER, MECHANICAL, FOO

Solicitation # SPE3SE-27-T-0115

Solicitation SPE3SE-27-T-0115, issued by the DLA Troop Support Subsistence FSE Supply Chain, seeks quotes for two mechanical food freezers under NSN 4110014257993. These commercial off-the-shelf items must operate on 115V AC, 60 Hz, 1PH power and utilize R404A (HP62) refrigerant. The contract explicitly prohibits the use of R290A propane-based refrigerant, as it is not approved for naval vessel food service applications. Delivery is required within 20 days after order, with an original required delivery date of October 29, 2026, shipped FOB Destination to locations in Lock Haven and Plymouth, Pennsylvania. The procurement is governed by NAICS 333241 and requires strict adherence to DLA packaging and marking standards, specifically RP001, ASTM D3951, and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination. Offerors must submit realistic delivery schedules via the DIBBS system, and while price breaks are encouraged, alternate parts will not be accepted. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.

Food Product Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

KIT, KETTLE CARE

Solicitation # SPE3SE-27-T-0122

Solicitation SPE3SE-27-T-0122 is a request for quotations issued by the DLA Troop Support Subsistence FSE Supply Chain for the procurement of one Kettle Care Kit, identified by NSN 7310-01-596-0376 and Part Number 407978. The requirement is for a non-small business set-aside under NAICS code 333241. Delivery is required within 20 days after order, with a required delivery date of November 2, 2026. The shipment is designated as FOB Destination, with the final delivery point being the USS Comstock LSD 45. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001 guidelines. Special material restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Evaluation is based on a realistic delivery schedule, and alternate parts or government surplus materials will not be accepted.

Food Product Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Microwave Ovens (NSN 7310-01-505-3276)This subcontract involves the procurement and delivery of 60 microwave ovens, specifically NSN 7310-01-505-3276 and Lockheed Martin part number 300-1834-01, for prime contractors supporting DLA supply contracts at the DDSP New Cumberland Facility. The agreement strictly prohibits the use of alternate or surplus parts and mandates that all items be packaged according to ASTM D3951 and MIL-STD-129 standards and palletized per RP001 requirements. The contract is issued by the Department of Defense under the Subsistence FSE Supply Chain with a delivery term of FOB Destination. To be eligible, providers must maintain active SAM and DIBBS registrations and ensure full compliance with Buy American regulations. The response deadline for this requirement is December 9, 2026.

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

Specialized Freight Delivery (Pennsylvania)This subcontract for Specialized Freight Delivery involves the transport of commercial kitchen equipment for the Department of Defense under the Subsistence FSE Supply Chain. The contractor is responsible for picking up 75 packaged food storage units from a supplier and transporting them to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The project requires the use of standard freight transport to ensure all units are delivered within a strict 30-day window. To finalize the contract and facilitate inspection and acceptance, the contractor must provide official proof of delivery upon arrival at the destination.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 12 hours

Hot Food Storage Well SupplierThis subcontract involves the supply of 75 hot food storage wells for prime contractors supporting SUBSISTENCE FSE SUPPLY CHAIN projects under the Department of Defense. The required equipment consists of part number LTD-1515D, NSN 7310-01-226-1697, which must operate at 115 V, AC, 60 HZ, 1 PHASE. All units must be delivered to DLA Distribution DDSP in New Cumberland, Pennsylvania. The contractor is required to adhere to strict technical and packaging standards, including Item Unique Identification per MIL-STD-130 and compliance with NAVSEA 5100-003D. Packaging must meet the specifications outlined in MIL-STD-2073-1E and ASTM D3951. This procurement falls under NAICS code 333415.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

in about 12 hours

FOB Destination Freight Delivery (Fort Hood)This subcontract, titled FOB Destination Freight Delivery (Fort Hood), is a Service-Disabled Veteran-Owned Small Business set-aside issued by the Department of Defense under the Subsistence FSE Supply Chain. The contractor is responsible for the transport and delivery of eight finished utility carts to Fort Hood, Texas, supporting prime contractors fulfilling DLA supply contracts for the US Army. The scope of work requires that all shipments be packaged and marked according to ASTM D3951 and MIL-STD-129 standards. The contractor must coordinate the delivery of the carts in acceptable condition within a five-day window following the order. This opportunity falls under NAICS code 484220 and was posted on November 9, 2026, with a response deadline of November 13, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Stainless Steel Utility Cart FabricationThis subcontract for the Department of Defense Subsistence FSE Supply Chain involves the fabrication of eight open, three-shelf utility carts designed for prime contractors delivering DLA supply contracts. The carts must be manufactured to NSF standards using stainless steel angle stock and sheeting, featuring 24 by 42 inch shelves and integrated push handles to support a weight capacity of 1,000 lbs. All work must be performed in compliance with the Buy American Act. The project is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332312, with the place of performance located at Fort Hood. Interested parties must adhere to the response deadline of November 13, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports the Department of Defense, specifically the Subsistence FSE Supply Chain. The contractor is responsible for providing military-grade packaging and labeling for prime contractors on DLA Troop Support projects, ensuring all items are packaged according to ASTM D3951 and palletized per RP001. The final output must be a fully compliant, palletized shipment ready for naval delivery. Technical requirements include strict adherence to MIL-STD-129 for markings and labels, as well as the implementation of unique identification using two-dimensional data matrix symbology in accordance with MIL-STD-130 and ISO/IEC 16022. The project falls under NAICS code 493110 and is performed in zip code 96628. The solicitation was posted on November 9, 2026, with a response deadline of November 13, 2026.

General Warehousing and Storage

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS