Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Heavy-Duty Mobile Column Vehicle Lift System

Open

Federal

Response Deadline11/19/2026, 05:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the General Services Administration's Supply Chain Management Contracting Division, involves the procurement of a heavy-duty mobile column vehicle lift system for federal defense projects. The requirement is for one fully configured system consisting of eight synchronized mobile lifting columns. Each unit must feature integrated casters, wheel-engaging lifting forks, mechanical safety locks, and overload protection to ensure synchronized lifting and prevent uneven loads. The equipment must be packaged in strict accordance with MIL-STD-129R and Federal Standard 123. This opportunity falls under NAICS code 332510 and was posted on November 13, 2026, with a response deadline of November 19, 2026.

General Info

Agency

General Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb

NAICS

332510 - Hardware Manufacturing

Place of Performance

DC

Set-Aside

NONE

Documents

This scope was carved out of 47QSSC27Q0045.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Vehicle Lift System - Mobile Column Type

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 13

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 05:00:00 PM ESTin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeneral Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb

ContactsNo contacts available

OfficeN/A

Organization / AgencyGeneral Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies a synchronized mobile column vehicle lift system for prime contractors on federal defense procurement projects. Provides eight mobile lifting columns with integrated casters, wheel-engaging lifting forks, mechanical safety locks, and overload protection. Ensures synchronized lifting to prevent uneven loads. Packages equipment per MIL-STD-129R and Federal Standard 123. Delivers one fully configured 8-column mobile vehicle lift system.

Similar Contracts

Same NAICS industry code

Supply of Self-Locking Nut (NSN 5310-00-367-8744)This subcontract with the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, requires the manufacture or sourcing of self-locking, extended washer, double nuts identified by NSN 5310-00-367-8744. The contractor is responsible for ensuring all parts meet strict technical specifications and must perform all necessary testing to validate quality and compliance. Key deliverables include the physical supply of the nuts and a formal Test Report, which must be submitted within 151 days after the receipt of the order. All items and documentation are to be delivered FOB Destination. The contract falls under NAICS code 332510 and is intended for prime contractors supporting Department of Defense projects.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Supply of Specialized Cotter PinsThis subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div, involves the supply of 11 specialized cotter pins. The required items must be part number 811071004, matching NSN 5315-01-721-9247 and adhering to Curtiss-Wright Electro-Mechanical Corp 830R7 specifications. The contract is categorized under NAICS code 332510 and is intended for prime contractors working on Department of Defense projects. Strict quality and packaging standards are mandated, requiring adherence to MIL-STD-2073-1E for packaging and MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 for inspection to ensure zero non-conformances. Additionally, the supplier must provide evidence of approved source status. The solicitation was posted on November 13, 2026, with a response deadline of November 16, 2026, and performance is located in zip code 95304-5000.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Finishing Washer Supply (NSN 5310003220132)This subcontract involves the supply of 10,678 finishing washers for prime contractors supporting the Department of Defense, specifically the ASC Commodities Division. The contractor is responsible for manufacturing or sourcing washers that strictly adhere to the material and dimensional specifications of NSN 5310003220132. All deliverables must be labeled and packed according to MIL-STD-129 and palletized in compliance with RP001 DLA Packaging Requirements. The final products are to be delivered to Robins Air Force Base, with the contract falling under NAICS code 332510.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-001P

The Defense Logistics Agency Weapons Support ASC Commodities Division is soliciting the procurement of three PIN-RIVET components under NSN 5320-01-498-0283. The contract requires delivery within 20 days after order, with shipping terms set as FOB Destination to the USS Minnesota SSN 783. All items must adhere to strict quality and sampling standards, specifically MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the use of mercury or mercury compounds in preservation is strictly prohibited. This acquisition is subject to rigorous security and export controls, including ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification. The contract incorporates CMMC Level 2 requirements and DFARS 252.204-7012 for safeguarding covered defense information. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. Offerors must comply with the Buy American Act and the Berry Amendment, and all quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-8930

Solicitation SPE4A6-27-T-8930 is a request for quotations from the DLA Weapons Support ASC Commodities Division for the procurement of 12,514 blind rivets (NSN 5320012111555). The items must be manufactured in accordance with reference drawing 13873 EI-012111555 Revision D and non-government standard NASM81177 Revision 2. Delivery is required by July 5, 2027, with a need ship date of May 10, 2027, to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract is established as FOB Origin, with both inspection and acceptance occurring at the origin. Compliance requires the manufacturer's inspection system to meet SAE AS9003 or ISO 9001 standards. Quality assurance sampling will follow MIL-STD-1916 or ASQ H1331, with a strict zero non-conformance requirement for acceptance. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129 and RQ017. Notably, the government will not evaluate any offers utilizing additive manufacturing processes. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 assessment requirements, and the use of the Wide Area WorkFlow system for electronic invoicing.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

PIN, TAPERED, PLAIN

Solicitation # SPE4A6-27-T-008J

This fixed-price procurement, issued by the DLA Weapons Support ASC Commodities Division, is for the supply of 22 plain tapered pins under NSN 5315-00-880-1285. The contract requires delivery by October 22, 2027, with shipping handled via the First Destination Transportation program on an FOB Origin basis. Delivery is designated for the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and technical standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-1916 or ASQ H1331 for sampling. Critical items require source inspection, and a Certificate of Quality Compliance is mandatory. Packaging must comply with MIL-STD-2073-1E and RP001, with a strict prohibition on the use of mercury or mercury compounds in preservation and packaging. Additionally, the contract incorporates comprehensive cybersecurity and domestic material requirements, including DFARS 252.204-7012 for safeguarding covered defense information and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-9350

Solicitation SPE4A6-27-T-9350, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 16 threaded pin-rivets (NSN 5320-01-132-0546). The contract requires delivery to DLA Distribution Warner Robins within 171 days after order, with a need ship date of May 4, 2027. This is a fully competitive procurement based on military or federal specifications, where additive manufacturing is strictly prohibited. Due to the nature of the item, casting or forging may be required, and the government may not possess the necessary special tooling. The contract mandates origin inspection and acceptance, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous and radioactive materials. Key regulatory clauses include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment will be processed electronically via the Wide Area WorkFlow system. A price evaluation preference is available for HUBZone small business concerns.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-8837

Solicitation SPE4A6-27-T-8837 is issued by the DLA Weapons Support ASC Commodities Division for the procurement of 521 pounds of solid rivets, identified by NSN 5320-00-264-3219. This is a fully competitive acquisition under the First Destination Transportation program, with delivery required 171 days after receipt of order to the DLA Distribution San Joaquin facility in Tracy, California. While the solicitation is not a small business set-aside, it utilizes a price evaluation preference for HUBZone concerns. The procurement is subject to a fixed-price structure and may be a candidate for automated award. The contractor must adhere to strict quality and technical standards, including the DLA Master List of Technical and Quality Requirements and the current revision of the part standard. Inspection and acceptance will occur at the origin, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with a specific prohibition on mercury compounds. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and CMMC Level 2 self-assessment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

BOLT, INTERNAL WRENCHIN

Solicitation # SPE4A6-27-T-003T

Solicitation SPE4A6-27-T-003T, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 22 internal wrenching bolts, identified by NSN 5306011224689 and part number 965834-110. The contract specifies a delivery timeline of 253 days after order, with a required delivery date of July 25, 2027, shipped FOB Origin to DLA Distribution Warner Robins in Georgia. Quality assurance is stringent, requiring sampling in accordance with MIL-STD-1916 or ASQ H1331, and the items are designated as critical application items. The contractor must adhere to comprehensive technical and quality requirements from the DLA Master List, including CMMC Level 2 self-assessment and covered defense information safeguards. Packaging must follow ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with the Buy American Act and Berry Amendment. Destination inspection is required per FAR 52.246-2.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-004A

Solicitation SPE4A6-27-T-004A, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for 313 units of threaded pin-rivets (NSN 5320-01-218-9886). These items are classified as commercial products and critical application items, requiring manufacture in accordance with the current revisions of NAS4452 and NAS4444 standards. The contract specifies a delivery date of June 7, 2027, with a delivery timeline of 205 days after order. Delivery is FOB Destination, with the final destination being the DLA Distribution Depot Hill in Utah. Quality assurance is a primary focus, requiring origin inspection and a manufacturer's inspection system compliant with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, and all Class 3A and 3B threads must be inspected per FED-STD-H28/20. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling compliant with MIL-STD-129 and MIL-STD-130N. Notably, the government will not evaluate or award offers that utilize additive manufacturing processes. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and strict adherence to DFARS cybersecurity and domestic material restrictions, including the Buy American Act.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

STUD, TURNLOCK FASTENER

Solicitation # SPE4A6-27-T-8851

Solicitation SPE4A6-27-T-8851, issued by the DLA Weapons Support ASC Commodities Division, is a fixed-price procurement for 630 units of turnlock fastener studs (NSN 5325004295979). This item is designated as a critical application item and must conform to reference drawing 07482 9679M71 Revision E or be supplied under part numbers 9679M71P02 (General Electric Company) or CA18021-2C (Howmet Global Fastening Systems Inc.). The required delivery date is March 11, 2027, with a need ship date of March 5, 2027, and delivery terms set as FOB Origin. Inspection and acceptance will occur at the destination, specifically DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. Marking and labeling must comply with MIL-STD-129 and MIL-STD-130N, while palletization must follow RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for sample lots under MIL-STD-105/ASQ Z1.4. Key regulatory requirements include the Buy American Act, DFARS safeguarding of covered defense information, and specific prohibitions on hexavalent chromium and covered telecommunications equipment. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-9486

Solicitation SPE4A6-27-T-9486, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 5,334 blind rivets under NSN 5320-01-385-5429. The items must be manufactured according to the current revision of the applicable part standards, specifically referencing NAS9303 and NAS1686. This is a critical application item with a required delivery date of May 16, 2027, and a need ship date of May 4, 2027. Delivery is established as FOB Origin, with the final destination being DLA Distribution San Diego. Quality assurance is governed by a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, though DLA Master List requirements take precedence. Item Unique Identification is not required. Administratively, the contract requires the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment, and adherence to various FAR and DFARS clauses regarding cybersecurity, small business representations, and domestic material restrictions.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

More opportunities from General Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb

Same awarding agency

Purchase Olson Electrics 300k Pad Mount Transformer

Solicitation # 47QSSC27Q0027

The General Services Administration, on behalf of NAVFAC SW MPD HVE Utilities, is soliciting quotes for the purchase and delivery of one Olsun Electrics 300kVA Cast Coil Transformer. This is a brand-name requirement with no substitutions accepted, as only Olsun provides the specific feed-through dry-type transformers necessary for the installation due to a lack of containment pads for liquid-filled alternatives. The required unit is a copper-wound, pad-mounted step-down transformer (Delta-Wye) with a primary voltage of 12000D and secondary voltage of 208Y/120. It must feature a NEMA 3R outdoor enclosure made of 316 stainless steel with Munsell Green paint, a tamper-resistant compartmentalized design, and a radial feed-through design with six 200A bushing wells. The estimated contract value ranges between $141,334.00 and $172,427.48. The contract will be awarded to the responsible offeror based on the lowest evaluated price, provided they pass administrative compliance and technical acceptability. Delivery is FOB Destination to Naval Base San Diego, California, specifically the East Miramar Marine Corps Base Storage facility. Vendors must provide factory test results and strictly adhere to MIL-STD-129R marking and shipping label requirements, including specific bar-coding and identification text. To be considered valid, quotes must be submitted by December 10, 2026, and must include the completed RFQ document and the signed MIL-STD 129 compliance document. Offerors must also maintain active registration in SAM.gov and comply with the Buy American Act and various FAR provisions regarding security prohibitions and telecommunications equipment.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 15 hours ago

DEADLINE

Purchase Olsun Electrics 225 KVA Transformer

Solicitation # 47QSSC27Q0028

Solicitation 47QSSC27Q0028 is a Request for Quote issued by the General Services Administration on behalf of NAVFAC SW MPD HVE Utilities for the purchase and delivery of one Olsun Electrics 225kVA Cast Coil Transformer. This equipment is mission-critical for operations at Naval Base San Diego, California. The transformer must be a 3-phase, 60 Hertz, copper wound, pad-mounted unit with a NEMA 3R cold rolled 316 stainless steel enclosure. Technical specifications include a primary voltage of 12000D, secondary voltage of 208Y/120, and a radial feed-through design with three 200A bushing wells. Due to specific technical requirements and a lack of containment pads for oil-filled alternatives, this is a brand-name procurement, and no substitutions will be accepted. The contract will be awarded on a Lowest Price Technically Acceptable basis to a responsible offeror who passes an administrative compliance review. To be considered valid, quotes must be submitted by December 10, 2026, and must include the completed RFQ document and a signed MIL-STD 129 compliance document. Delivery is FOB Destination, CONUS, to Naval Base San Diego. The awarded vendor must comply with MIL-STD-129R marking and shipping label requirements and provide factory test results, including IEEE/ANSI Standard production tests. Estimated total dollar values for the procurement are cited between $120,364.00 and $146,844.08.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 15 hours ago

DEADLINE

Vehicle Lift System - Mobile Column Type

Solicitation # 47QSSC27Q0045

The General Services Administration Direct Demand Contract Solutions Division is soliciting quotes for one Vehicle Lift System, Mobile Column Type, specifically Sanitz Enterprises part number AP1001321 or an approved equal. The required system must consist of eight synchronized mobile lifting columns, each with a minimum capacity of 19,000 pounds, capable of accommodating tires up to 63 inches in diameter and 12 inches deep. Key safety requirements include wheel-engaging lifting forks or brackets and mechanical safety locks to secure loads at various heights. Delivery is specified as FOB Destination to Fort Bliss, Texas, and vendors must be registered to receive purchase orders via the OMS Vendor Portal or EDI. Award will be based on the lowest evaluated price for offerors who pass a pass/fail evaluation of administrative compliance and technical acceptability. Administrative compliance requires the complete submission of all RFQ fields, Section 3 questions, and required clauses. Technical acceptability for non-brand name offers requires the submission of manufacturer specifications for an equal determination. All shipments must adhere to strict packaging and marking standards, including MIL-STD-129R for military deliveries, which mandates specific 2D bar-coding and the inclusion of a Transportation Control Number on the shipping label.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Rosenbauer Minnesota Miscellaneous PartsThis subcontract through the General Services Administration involves the supply of 38 miscellaneous parts for prime contractors on GSA supply contracts. The scope requires sourcing 25 distinct part numbers manufactured by Rosenbauer Minnesota, ensuring all items meet strict manufacturer specifications. Compliance with Military Standard 129R for marking and Federal Standard 123 for domestic marking is mandatory, with final delivery of verified parts to a designated shipping point in Vista, California. Administrative requirements include mandatory registration in SAM.gov and the OMS Vendor Portal/EDI. The contract falls under NAICS code 423830 and is managed by the Supply Chain Management Contracting Division. Interested parties must adhere to the specified response deadline of November 17, 2026, to be considered for this procurement effort.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Rosenbauer Minnesota South Misc Parts

Solicitation # 47QSSC27Q0044

The General Services Administration Supply Chain Management Contracting Service Center is soliciting quotes for a one-time buy of miscellaneous Rosenbauer parts. The requirement consists of a single group order for 38 pieces across 25 different items. Delivery is on a FOB Destination basis within the Continental United States, with shipments routed to Vista, California, for the ultimate consignee at Fort Wainwright, Alaska. Award will be based on the lowest price, provided the vendor meets all administrative compliance requirements, including registration via EDI or the OMS Vendor Portal and strict adherence to MIL-STD-129 marking and labeling standards. Offerors must submit complete documentation, including pages 1 through 3 of the RFQ and a signed MIL-STD-129R compliance form, to be considered for award. Foreign corporations must maintain a physical U.S. address and a resident agent to be eligible. The contract incorporates various Federal Acquisition Regulation clauses covering labor standards, Buy American preferences, and security prohibitions. Additionally, any hazardous materials must be packaged in accordance with DOT HMR and OSHA HCS standards. This acquisition is not set aside exclusively for small businesses.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

MIL-STD-129R Compliant Packaging and ShippingThis small business set-aside subcontract, managed by the General Services Administration's Supply Chain Management Contracting Division, requires specialized military packaging, marking, and delivery services for prime contractors on GSA/FAS supply contracts. The selected provider will be responsible for preserving and packaging items in unit, intermediate, and exterior containers, ensuring all shipments utilize 2D PDF417 bar codes and Military Shipping Labels in strict accordance with MIL-STD-129R and GSAM standards. The scope of work includes executing FOB Destination delivery to Norfolk, Virginia, ensuring all equipment arrives fully labeled and packaged. While the place of performance is listed in Kansas City, the contract focuses on high-compliance logistics under NAICS code 488510. Interested parties must respond by November 19, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Power-Dyne PD1201 Torque Wrench MultipliersThis small business set-aside subcontract through the General Services Administration involves the procurement of six brand-name Power-Dyne PD1201 Torque Wrench Multipliers for prime contractors. Each unit must feature a capacity of 0-1,200 ft-lb with 25 ft-lb graduation, an analog gauge, a 3/4 inch output, a 3/8 inch input, and a 6 inch crank. All units are required to be delivered with carrying cases and must be permanently marked with the manufacturer's part number, name, and country of origin. The contract is managed by the Supply Chain Management Contracting Division and requires strict compliance with the Buy American Act. Performance for this requirement is located in Kansas City. Interested parties must adhere to the response deadline of November 19, 2026, as specified in the solicitation posted on November 9, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Purchase NSN 5120001692986, TORQUE WRENCH MULTIPLIER

Solicitation # 47QSSC27Q0042

The General Services Administration is soliciting quotes for the purchase of six Power-Dyne PD1201 Torque Wrench Multipliers (NSN 5120001692986). This is a brand-name acquisition where no substitutions or deviations are permitted. The required equipment must feature a torque capacity of 0 to 1,200 foot-pounds, a 25 foot-pounds scale graduation with an analog gauge signal, a 3/4 inch internal square drive output, and a 3/8 inch internal square drive input. Each unit must be made of steel, have a 6-inch crank length, operate between -20 and 130 degrees Fahrenheit, and include a carrying case. Items must be permanently marked with the manufacturer's name, part number, and country of origin. This procurement is a total set-aside for small businesses under NAICS 332216, requiring vendors to have a size standard of 750 employees or less. Award will be based on the lowest price for offerors who pass the administrative compliance review. Valid quotes must include a signed and dated RFQ document and a signed MIL-STD-129R compliance form. Delivery is FOB Destination, CONUS, to Norfolk, Virginia. Packaging and marking must adhere to GSAM and MIL-STD-129R standards, including the use of 2D (PDF417) bar codes and Military Shipping Labels. The contract is subject to the Buy American Act and standard commercial terms and conditions.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

IEEE/ANSI Standard Transformer TestingThis subcontract opportunity, titled IEEE/ANSI Standard Transformer Testing, is issued by the General Services Administration's Supply Chain Management Contracting Division. The project involves performing certified production and post-shipping testing for prime contractors on GSA electrical procurement projects located in San Diego, California. The scope of work requires the execution of IEEE/ANSI Standard production tests and post-shipping verification to ensure operational compliance and transit integrity, utilizing high-voltage testing equipment and certified calibration tools. Qualified providers must employ factory-certified technicians to conduct these evaluations and deliver comprehensive certified test reports and validation documentation. Interested parties must submit their responses by the deadline of December 7, 2026. The contract falls under NAICS code 541990 and is focused on maintaining strict technical standards for electrical infrastructure.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

Olsun Electrics 225kVA Cast Coil Transformer SupplierThis subcontract through the General Services Administration involves the procurement of one Olsun Electrics 225kVA Cast Coil Transformer intended for prime contractors on GSA projects. The equipment is specified as a copper wound, dry type padmount transformer for unit Pad B4-PS4-T62 with a 12kV-208Y/120 Delta-Wye configuration. It must feature a 316 Stainless Steel enclosure finished in Munsell Green paint. The project is located in San Diego, California, and requires strict adherence to the Buy American Act and the Nonmanufacturer Rule. Interested parties must submit responses by December 7, 2026, to provide one fully configured unit meeting all technical and regulatory specifications.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Post-Shipping Electrical Testing and ValidationThis subcontract opportunity involves performing technical post-shipping electrical testing and validation on a 300 KVA transformer for prime contractors supporting NAVFAC SW MPD HVE Utilities projects in San Diego, California. The selected qualified electrical technician or certified testing agency will be responsible for conducting comprehensive inspections and electrical tests using transformer analyzers, voltage meters, and insulation testers to ensure the equipment meets all performance metrics and integrity standards. The primary deliverable for this engagement is a detailed testing report that validates the operational status of the transformer. Interested parties must submit their responses by December 7, 2026, for this project managed under the General Services Administration.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

Olsun Electrics 300 KVA Transformer SupplyThis subcontract, managed by the General Services Administration's Supply Chain Management Contracting Division, involves the procurement of one brand-name Olsun Electrics 300 KVA Transformer. The equipment is intended for prime contractors working on NAVFAC SW MPD HVE Utilities projects located in San Diego, California. The selected provider must be an authorized dealer or manufacturer and ensure that the unit meets all technical specifications. The contractor is responsible for the packing and marking of the transformer in strict accordance with FAR 552.211-73 and 552.211-77, while maintaining overall compliance with FAR 52.240-93. The solicitation was posted on October 26, 2026, with a response deadline of December 7, 2026, under NAICS code 335311.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

53--PLATE,MOUNTING

Solicitation # N0010427QNA50

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

53--COVER,ACCESS

Solicitation # N0010426RZB85

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

Rim Latch Supply

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Butt Hinges (NSN 5340-01-151-0938)

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Protective Cap Manufacturing and Supply

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supply of Close Tolerance Screws (NSN 5305-01-462-2883)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Turnlock Fastener Stud Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing and Supply of Cotter Pins (MS24665-462)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing and Supply of Double Angle Brackets (NSN 5340011737993)

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Helical Extension Spring Manufacturer/Supplier

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Machine Bolt Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Qualified Component Parts for Roller Assembly

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS