Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Helical Torsion Spring Manufacturing

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Manufacture 2,250 helical torsion springs according to technical drawing 19207 7521423 Rev B Gen 2 for critical Department of Defense applications requiring adherence to the highest quality and regulatory compliance standards. The springs must be produced to precise engineering specifications to ensure operational reliability in mission-critical systems, with all work subject to rigorous inspection and documentation protocols. The contract is issued as a subcontract under NAICS code 332613 and performance must occur at Greensboro, North Carolina, 27409. Bidders must submit proposals by August 17, 2026, with the solicitation posted on August 5, 2026, under the oversight of the Land Supply Chain division of the Department of Defense. Full compliance with defense acquisition regulations, material traceability, and quality assurance procedures is mandatory throughout production and delivery.

General Info

Manufacture 2,250 helical torsion springs per DoD specs in Greensboro, NC, with full compliance and inspection by August 17, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

GREENSBORO, NC, 27409, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture 2,250 helical torsion springs to technical drawing 19207 7521423 (Rev B Gen 2) for critical DoD applications with strict quality and compliance standards.

Similar Contracts

Same NAICS industry code

Supply of Flat Spring (NSN 7016879400)The contract specifies the manufacture and supply of 19 units of a flat spring designated by NSN 7016879400, a commercial off-the-shelf component required to meet military specifications. The item must comply with defense logistics protocols, including specialized packaging standards and cybersecurity requirements to ensure integrity across the supply chain. The contract is structured as a subcontract under the NAICS code 332613, reflecting its classification within precision turned product manufacturing. Performance is designated for Greensboro, North Carolina, with a zip code of 27409, indicating the delivery and operational location tied to the Department of Defense’s Land Supply Chain. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and all submissions must adhere to the formal procurement process managed through the DIBBS platform via the provided link.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Precision Manufacturing of Critical Application CapsThe contract requires the precision manufacturing of high-reliability, traceable CAP and FILLER OPENING components in strict accordance with military technical data packages and engineering drawings. All work must adhere to rigorous quality control and inspection standards to ensure compliance with defense-grade specifications, emphasizing traceability and consistency for critical applications. The components are integral to systems requiring maximum performance under demanding operational conditions, and manufacturing processes must be validated and documented to meet stringent military requirements. The solicitation is issued as a subcontract under the Department of Defense’s Strategic Acquisition Program Directorate, with a NAICS code of 332613 indicating classification within miscellaneous fabricated metal product manufacturing. Proposals must be submitted by the deadline of August 20, 2026, and all work is expected to align with defense supply chain protocols. The contract is not subject to any specific set-aside designation and is open to qualified subcontractors capable of delivering fully compliant, high-integrity components. All details and requirements are accessible through the official DIBBS portal linked in the posting.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

Precision Machining and Metal Fabrication ServicesThe contract solicits precision machining and metal fabrication services for internal ball joint components including housings, studs, and sleeves, to be manufactured from high-strength alloys with required heat treatment and surface finishing to meet exacting performance standards. Work must be performed to military-grade specifications with emphasis on dimensional accuracy, material integrity, and consistent quality control throughout production. The subcontract is issued under NAICS code 332613 and is part of a Department of Defense acquisition program led by the Strategic Acq Program Directorate, targeting capabilities critical to defense systems. Responses are due by August 20, 2026, with the procurement posted on August 5, 2026, and no set-aside provisions have been designated. Place of performance and specific delivery locations are not specified, and all work must align with the technical and quality requirements inherent in defense-grade components without reliance on external documentation or citations.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

SPRING, HELICAL, COMP

Solicitation # SPE7L1-26-T-920S

This contract is for the procurement of 37 helical compression springs with NSN 5360-01-517-4972 under solicitation SPE7L1-26-T-920S, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The solicitation is open for full and open competition with a response deadline of August 17, 2026, and delivery is required within 140 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. The item contains technical data subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. Covered defense information is applicable, and the contractor must be certified under CMMC Level 2 by a C3PAO. Performance location is Phoenix, Arizona, 85043, and primary point of contact is George Mitchell, with email and phone provided for procurement inquiries.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE4A5-26-T-332M

The contract specifies the procurement of a single helical compression spring with part number 101040-02 and NSN 5360-00-535-0099, to be delivered in a quantity of one unit within 20 days from the required delivery date of July 23, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling and inspection procedures mandated to follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in the sample lot unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only to determine sample size. Packaging must comply with ASTM D3951, but is subordinate to DLA packaging requirements, and all items must be marked and labeled per MIL-STD-129, with palletization in accordance with RP001. The material is not hazardous, has no shelf life, and does not require Item Unique Identification or a Safety Data Sheet. Delivery is FOB origin, with inspection and acceptance occurring at destination, and shipment must be sent by the fastest traceable means, explicitly excluding parcel post. The contract references multiple DLA procedural notes for transportation and addresses the freight and parcel post destinations for Marine Aviation Logistics Squadron 14 at Cherry Point, North Carolina, under the procurement request number 7017639043 and contract SPE4A5-26-T-332M.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

SPRING, HELICAL, COMP

Solicitation # SPE7L1-26-T-919H

The contract is for 18 helical compression springs with NSN/Part Number 5360-01-073-7824, issued under solicitation SPE7L1-26-T-919H by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 154 days after order award, with bids due by August 17, 2026. The item falls under NAICS code 332613 and is subject to multiple technical and quality requirements referenced from the DLA Master List, including packaging standards, export control compliance, and cybersecurity certification. Technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons unless authorized, and access is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA approval. The Defense Logistics Agency mandates CMMC Level 2 certification for third-party assessors involved in the supply chain, and removal of government identification from non-accepted supplies is required. All performance is to be delivered to Greensboro, NC, 27409, with Robert Warne as the primary point of contact for inquiries.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-8893

The contract is a solicitation issued by the Defense Logistics Agency under number SPE7LX-26-U-8893 for 116 leaf springs, classified under NSN 5360-01-388-2297, with a total estimated value not exceeding $350,000 as an indefinite delivery contract. The acquisition is structured as a total small business set-aside under NAICS code 332613, with full socioeconomic compliance required from offerors, including self-certifications for small, HUBZone, WOSB, EDWOSB, and SDB statuses. Delivery is required within 116 days after order placement, governed by FOB Origin terms, with inspection and acceptance conducted by the Government at the contractor’s origin location. Packaging must adhere to MIL-STD-2073-1E using packaging code U and preservation method 10 (cleaning and drying), while labeling and marking comply with MIL-STD-129 and OSHA’s Hazard Communication Standard, with submission of safety data sheets mandatory prior to award. The item contains technical data subject to ITAR or EAR export controls; access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DLA export training, and formal authorization. Key compliance clauses include 52.227-1 Alt I and II for authorization of use, 252.204-7012 for safeguarding covered defense information, and 252.223-7001 for hazardous material labeling. All payments must be processed through Wide Area WorkFlow, and contractors must affirm representations regarding small business status, unique entity identifiers, and prohibited telecommunications equipment. Technical and quality requirements are governed by the DLA Master List, with sampling and inspection using MIL-STD-1916, requiring zero non-conformances for critical attributes. No pricing details are provided in the CLIN, and award will be determined based on price and socioeconomic factors without formal weighting, indicating a possible trade-off approach. The solicitation closing date is August 5, 2026, and all responses must be submitted via DIBBS.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE7L1-26-T-919G

The contract solicits 197 helical compression springs under NSN 5360-00-904-0278 with a delivery deadline of 154 days after award, issued as a full and open competition under solicitation SPE7L1-26-T-919G. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. The item must comply with strict environmental and safety regulations prohibiting the use of ozone-depleting chemicals, asbestos, and intentional mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and authorized chemical reagents. Mercury-containing portable lamps and instruments must include dual containment barriers and be shockproof per NAVSEA 5100-003D. All parts must be free of asbestos, with any replacements requiring formal approval under clause L30 and provision 4 conditions. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1 with zero non-conformances required unless otherwise stipulated, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to DLA standards, and government identification must be removed from rejected items. The point of contact for inquiries is Derek Roberts at the Department of Defense’s Land Supply Chain, with responses due by August 17, 2026.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SPRING, HELICAL, COMP

Solicitation # SPE7L1-26-T-916U

The contract pertains to the procurement of one helical compression spring identified by NSN 5360-01-339-0693 and part number A51091MDX, supplied by HUNT VALVE COMPANY, INC. Delivery is required within 20 days to the destination FOB, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The item must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, containment, and marking procedures, with no special marking required. Packaging must be palletized according to DLA requirements, and shipment is designated for vessel delivery to USS BOXER LHD 4 at FPO AP 96661 under DLAD procedures C19 and C20. The contract strictly prohibits intentional introduction of mercury or mercury-containing compounds into the supplied hardware, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices as defined by NAVSEA 5100-003D. The solicitation number is SPE7L1-26-T-916U, with a response deadline of August 17, 2026, and the required delivery date is August 3, 2026. Technical and quality standards referenced in the DLA Master List are incorporated by reference, with compliance determined based on the revision in effect on the solicitation or award date. The contract is administered by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SPRING, HELICAL, EXTE

Solicitation # SPE7L1-26-T-630T

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SPRING, HELICAL, COMP

Solicitation # SPE7L1-26-T-916Z

The contract specifies the procurement of a single helical compression spring identified by NSN 5360-01-526-2928 and part number 21055 under solicitation SPE7L1-26-T-916Z, with a delivery requirement of 20 days from origin, FOB origin, and zero tolerance for quantity variance. The item must be packaged in accordance with ASTM D3951, with all packaging and labeling conforming to MIL-STD-129 as dictated by the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951. Palletization must comply with DLA Packaging Requirements for Procurement RP001. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware unless explicitly exempted for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA. Portable devices containing mercury must include shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The item is to be shipped via the fastest traceable means, explicitly excluding parcel post, with delivery addressed to the DLA facility in Norfolk, Virginia. The contract mandates that government identification be removed from non-accepted supplies per RQ011 and requires use of the approved DoD unit of issue as referenced in the official DLA unit of issue document. The original required delivery date is August 3, 2026, and performance is subject to inspection and acceptance at destination.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SPRING, HELICAL, COMP

Solicitation # SPE7L1-26-T-919E

The contract pertains to the procurement of 263 helical compression springs with the NSN 5360-01-014-0046 under solicitation SPE7L1-26-T-919E, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 77 days of award, with the response deadline set for August 17, 2026, and the solicitation posted on August 5, 2026. Compliance with technical and quality requirements referenced by R and I numbers in the DLA Master List is mandatory, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must conform to DLA standards, and all government identifiers must be removed from non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly permitted by the specification. The item must be entirely free of asbestos, and any alternative materials must be approved in accordance with Clause L30 and Provision 4 conditions. The place of performance is Phoenix, Arizona, 85043, with Chelsea Cunningham as the primary point of contact for inquiries.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Data retrieval failedA subcontract opportunity has been posted with a response deadline of August 17, 2026, and was made available on August 5, 2026, under the agency name LAND SUPPLY CHAIN within the Department of Defense. The place of performance is identified as New Cumberland with a zip code of 17070-5002, though no specific city or state details are provided beyond that. The solicitation number is SPE7L126T919X, and the opportunity is accessible via the DIBBS platform. However, critical contract details such as the NAICS code, type of set aside, organization type, and point of contact are unavailable. Attempts to retrieve subcontract-specific data have failed due to gateway timeout errors, preventing full decomposition of the opportunity and limiting visibility into underlying prime contract information or award specifics.

POSTED

about 20 hours ago

DEADLINE

Packaging, Labeling, and Shipping of Defense SuppliesThe contract requires compliant packaging, labeling, and shipment of mounting plates in accordance with DLA standards, specifically MIL-STD-129 for military labeling, ASTM D3951 for commercial packaging, and RP001 palletization guidelines to ensure uniformity and readiness for military logistics. All work must adhere strictly to these specifications to guarantee proper identification, handling, and traceability throughout the defense supply chain. The items are to be delivered to a designated performance location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, ensuring alignment with DLA’s logistical infrastructure and warehouse reception protocols. This is a subcontract solicitation under NAICS code 493190, issued by the Department of Defense through the Land Supply Chain organization, with a response deadline of August 19, 2026. The solicitation is open for submissions and requires contractors to demonstrate capability in meeting rigorous defense packaging and transportation benchmarks. The absence of set-aside designation suggests it is open to all qualified small and large businesses, and all proposals must be submitted via the DIBBS portal using the provided link before the deadline to be considered for award.

Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

Precision Metal Fabrication of Mounting PlatesThe contract calls for the manufacture and delivery of ten precision mounting plates specified under NSN 5340-01-590-0080, with strict adherence to military specifications governing design, material composition, and dimensional tolerances. Full material traceability is required throughout the production process, ensuring every batch of raw material can be linked to its origin and certification, and facility change controls must be implemented to document and approve any alterations to manufacturing methods, equipment, or locations to maintain consistency and quality. Performance is designated for New Cumberland, Pennsylvania, with the work falling under NAICS code 332722 for other metal forging and stamping operations. This is a subcontract opportunity issued by the Department of Defense through the Land Supply Chain, with a response deadline of August 19, 2026, and the solicitation posted on August 5, 2026. The effort requires compliance with defense production standards, emphasizing quality assurance, documentation integrity, and operational control to support military equipment systems. All production activities must be executed under conditions that ensure repeatable precision and regulatory alignment, with no deviations permitted without formal approval and recordkeeping.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

Hazard Communication and Safety Data ComplianceThe contract requires the preparation and submission of hazard warning labels and Safety Data Sheets for gasket materials, ensuring full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and MIL-STD-129 labeling requirements. All documentation must be finalized and submitted prior to award, directly to the contracting officer, to meet regulatory and military specifications for chemical safety and product identification. The work pertains to gasket materials used in defense applications and demands precise adherence to federal safety and labeling protocols to ensure proper handling, storage, and use across military supply chains. This subcontract is issued under the NAICS code 541620, associated with scientific and technical consulting services, and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. Performance is centered at Fort Leonard Wood, Missouri, with a response deadline of August 17, 2026, and the posting date of August 5, 2026. The solicitation is accessible via the DIBBS platform, and successful bidders must demonstrate proven capability in hazard communication, SDS authoring, and military labeling compliance. No set-aside preferences are specified, making this opportunity open to all eligible subcontractors capable of meeting the stringent technical and regulatory standards outlined.

Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

Military Packaging and Labeling ServicesThe contract requires the provision of compliant packaging, preservation, and labeling of gaskets in accordance with military specifications, ensuring readiness for Department of Defense logistics and storage. All gaskets must be sealed in waterproof bags and preserved using Preservation Method 33, designed to protect against corrosion and environmental degradation during extended storage and transit. Labeling must strictly adhere to MIL-STD-129 requirements, incorporating 2D barcodes and accurate National Stock Number and Contract Line Item Number data to enable seamless tracking and inventory management across military supply chains. Performance of this subcontract is designated for Fort Leonard Wood, Missouri, with a response deadline of August 17, 2026, and a posting date of August 5, 2026. The North American Industry Classification System code 561910 indicates the work falls under other support activities for agriculture and mining, highlighting the specialized nature of the packaging and preservation services required. The contract is issued under the Land Supply Chain division of the Department of Defense, emphasizing its role in supporting critical defense logistics infrastructure and ensuring that gaskets meet stringent readiness standards for military deployment.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Gasket Supply and ManufacturingThe contract calls for the manufacture and delivery of precision gaskets with National Stock Number 5330014668523, fully compliant with MIL-DTL-117 and MIL-STD-2073-1E specifications. This includes end-to-end responsibility for material sourcing, fabrication, rigorous quality control processes, and military-grade packaging to ensure operational readiness and environmental protection during transport and storage. All work must adhere to strict defense standards, with documentation and inspection protocols in place to validate compliance at every stage of production. The contract is a subcontract under the Department of Defense, managed by LAND SUPPLY CHAIN, with performance required at Fort Leonard Wood, Missouri, 65473-8947. It was posted on August 5, 2026, with proposals due by August 17, 2026. The North American Industry Classification System code is 332996, indicating specialization in other fabricated metal product manufacturing. The procurement is part of a broader defense logistics initiative and requires adherence to federal acquisition regulations, with no set-aside provisions specified. All deliverables must meet military readiness criteria and be traceable through documented quality assurance records.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full adherence to the OSHA Hazard Communication Standard (29 CFR 1910.1200) for all hazardous materials involved in production or packaging operations. This includes the accurate generation and application of hazard labels in compliance with GHS requirements and the prompt submission of Material Safety Data Sheets (MSDS) for each chemical used. All activities must ensure worker safety and regulatory compliance throughout the lifecycle of material handling and use. The work is to be performed at the designated location in Greensboro, North Carolina, with a zip code of 27409, under a subcontract arrangement managed by the Department of Defense through the LAND SUPPLY CHAIN organization. The solicitation was posted on August 5, 2026, with a mandatory response deadline of August 17, 2026. The NAICS code 541690 identifies this as an other scientific and technical consulting service, reflecting the specialized nature of the compliance and documentation services required. The contract does not specify a set-aside classification or point of contact, and the place of performance is limited to the Greensboro site without additional location details. Respondents must meet all federal safety standards and deliver documentation accurately and on time to satisfy contractual obligations.

Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

Defense-Compliant Packaging and Marking ServicesThe contract requires delivery of military-compliant packaging and labeling services aligned with DLA RP001, MIL-STD-2073-1E, and MIL-STD-129 standards, encompassing the full preparation of items for defense shipment including thorough cleaning and drying processes, adherence to specified container specifications, and proper marking and documentation for FOB origin shipment. All work must meet rigorous Department of Defense requirements to ensure durability, traceability, and compliance throughout the supply chain. The performance location is designated as Greensboro, North Carolina, with a zip code of 27409, and the work falls under NAICS code 423840 for wholesale trade of machinery and equipment. The solicitation is issued as a subcontract under the Land Supply Chain division of the Department of Defense, with a posted date of August 5, 2026, and a firm response deadline of August 17, 2026. Interested parties must submit proposals through the DIBBS platform using the provided solicitation link, and all deliverables must be fully compliant with federal military packaging and marking regulations to qualify for award. There is no set-aside designation or special procurement category specified, and the contract does not include a designated point of contact, requiring vendors to navigate the solicitation details directly through the provided online portal.

Industrial Supplies Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supply of Installer, Bushing (End-Item Manufacturer or Distributor)The contract involves the manufacture or supply of a single bushing installer as a finished end item that must fully comply with applicable military or federal specifications. The item must be delivered in complete, ready-to-use condition and meet all technical, quality, and performance standards required by defense procurement guidelines. The contractor is responsible for ensuring compliance with hazardous materials disclosure and labeling requirements, including proper documentation and placement of safety and regulatory markings per federal mandates. The solicitation is classified as a subcontract under NAICS code 332999, with a response deadline of August 17, 2026, and a posted date of August 5, 2026. Performance is required at Fort Riley, Kansas, with a specific zip code of 66442-0345. The contracting agency is the Department of Defense through the Land Supply Chain organization. No set-aside preferences are indicated, and no point of contact details are provided in the posting. All submissions must be made through the designated DIBBS platform using the provided link.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Fluid Filter (NSN: 2910-01-546-4764; P/N: FF5289)

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

Small Business & Socioeconomic Certification SupportThe contract seeks support services to assist offerors in obtaining and maintaining small business and socioeconomic certifications essential for eligibility in federal set-aside programs, including Women-Owned Small Business (WOSB), Service-Disabled Veteran-Owned Small Business (SDVOSB), and HUBZone certifications. The work focuses on guiding applicants through the complex application and verification processes required by federal agencies to meet certification standards and ensure compliance with program requirements. The contract is classified as a subcontract under NAICS code 541611, which pertains to management consulting services, and is issued by the Department of Defense through the LAND SUPPLY CHAIN organization. Performance is slated to occur at Camp Pendleton, California, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. The effort is designed to enhance contractor readiness for government contracting opportunities reserved for certified small businesses, with no specific set-aside type indicated in the solicitation details.

Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

Cybersecurity & Covered Defense Information SafeguardingThe contract requires the implementation and documentation of NIST SP 800-171 controls to protect covered defense information and ensure compliance with DFARS requirements, focusing on securing sensitive data handled within the defense supply chain. The work must be performed at Camp Pendleton, California, with a strict deadline for proposal submission on August 17, 2026, and the solicitation was posted on August 5, 2026. This is a subcontract under the Department of Defense, classified under NAICS code 541512 for computer systems design services, indicating the need for technical expertise in cybersecurity architecture, policy development, and control assessment. The contractor is expected to fully document all implemented security measures to demonstrate adherence to federal standards for safeguarding controlled unclassified information. The place of performance is specified, but no point of contact or set-aside provisions are provided, suggesting the opportunity is open to qualified entities without preference. All activities must align with the Department of Defense’s broader objective of maintaining the integrity and confidentiality of defense-related data, with successful execution critical to supporting operational security at a major military installation.

Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE