Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

High-Performance Material Supply (Superalloys or Composites)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of high-performance raw materials, including nickel-based superalloys, titanium, and advanced composites, specifically for the production of aerospace components critical to defense applications. These materials are essential for manufacturing parts that operate under extreme thermal and mechanical stress, ensuring the structural integrity and performance of high-end aerospace systems. The agreement is structured as a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the North American Industry Classification System code 331110 indicating primary activity in iron and steel forging and rolling. Performance will occur across unspecified locations, though the materials are destined for use in defense-related aerospace manufacturing. The contract was posted on July 20, 2026, with no set-aside preferences designated, and is accessible through the DIBBS portal for award and delivery tracking under contract SPE4A120G0002 and delivery order SPE4A526F1078.

General Info

Supply of aerospace-grade nickel, titanium, and composites for defense applications under DoD contract SPE4A120G0002.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

331110 - Iron and Steel Mills and Ferroalloy ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of high-performance raw materials such as nickel-based superalloys, titanium, or advanced composites for aerospace component production.

Similar Contracts

Same NAICS industry code

Raw Material Supply – Alloy Steel or Carbon Steel BlanksThe contract requires the supply of certified alloy or carbon steel bars, billets, or pre-cut blanks engineered for precision machining into military-spec solid disks, with stringent requirements for full material traceability throughout the production and delivery chain. All materials must meet exacting technical and quality standards to ensure compatibility with defense-grade manufacturing processes, and suppliers must document and maintain complete records of chemical composition, heat treatment, mechanical properties, and origin at every stage. The items must be suitable for high-volume machining operations that produce critical components for military applications, and compliance with relevant military specifications is non-negotiable. This subcontract is issued under NAICS code 331110 by the Department of Defense through the LAND SUPPLY CHAIN office, with performance location set at NEW CUMBERLAND, PA, ZIP 17070-5002. Bids must be submitted by July 31, 2026, following the posted solicitation on July 20, 2026. Although no set-aside designation is specified, participation is open to qualified vendors capable of meeting the demanding certification, traceability, and delivery timelines. The contract underscores the need for reliable, auditable supply chain integrity and emphasizes zero tolerance for material deviations or documentation gaps, as the end-use components are integral to defense systems requiring consistent performance under extreme conditions.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Domestic Raw Material Supply for Fastener ProductionThe contract seeks the supply of domestically sourced alloy or stainless steel specifically for the manufacturing of self-locking nuts, ensuring full compliance with the Berry Amendment and the Buy American Act. All materials must originate entirely within the United States, from raw material extraction through final production, to meet stringent federal requirements for defense-related procurement. The materials will be used in the production of fasteners critical to military and defense applications, requiring strict adherence to quality, traceability, and sourcing standards. This subcontract is a total small business set-aside under the SBA program, reserving the opportunity exclusively for small businesses as defined by the SBA size standards for NAICS code 331110, which covers iron and steel mills and fermentation plants. The solicitation was posted on July 20, 2026, with a response deadline of July 28, 2026, and performance will be centered at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity falls under the ASC Commodities Division of the Department of Defense, and interested parties must submit proposals through the DIBBS portal to be considered for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialty Metals Compliance & SupplyThe contract requires the supply or verification of specialty metals used in the production of bushings, with strict adherence to DFARS 252.225-7008 regulations to ensure all materials are sourced exclusively from approved countries. Full traceability of the metals from origin through delivery is mandatory, confirming compliance with U.S. national security and defense procurement standards. The work is classified as a subcontract under NAICS code 331110, indicating involvement in steel mill and steel product manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Performance is tied to defense-related requirements with no specified geographic location for execution, emphasizing quality control and regulatory fidelity over logistics parameters. The contract was posted in July 2026 and is linked directly to specific award and delivery records under the DIBBS system.

Defense Logistics Agency

POSTED

DEADLINE

Supply of 316L Stainless Steel Bar StockThe contract requires the procurement and delivery of 341 linear feet of 1.000-inch diameter 316L stainless steel bar stock, to be supplied in individual lengths between 10 and 12 feet, with all material in an annealed condition to ensure optimal mechanical properties and corrosion resistance. Full heat lot traceability is mandatory, along with the provision of comprehensive mill certifications to verify material composition, mechanical characteristics, and compliance with ASTM or equivalent standards for 316L stainless steel. The specification demands strict adherence to material quality control protocols to support high-integrity applications, particularly within defense or critical infrastructure environments. This subcontract is issued under the NAICS code 331110, indicating a primary focus on steel mill products manufacturing, and is managed by the Department of Defense through its CONSTRUCTION & EQUIPMENT MRO SVC I organization. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, giving suppliers a one-week window to submit proposals. All deliveries must meet exact dimensional, chemical, and certification requirements, and the place of performance is unlisted, suggesting flexibility in shipping destination, though final destination will likely align with U.S. military maintenance or construction needs. The contract is accessible via the DIBBS platform for further reference and submission.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Specialty Metal and Material Sourcing (Domestic-Compliant Supply)The contract pertains to the sourcing of DFARS-compliant specialty metals including tantalum, tungsten, and specialty steel for use in the production of DASHPOT components, ensuring adherence to U.S. domestic content requirements under the Defense Federal Acquisition Regulation Supplement. The materials are required to meet stringent regulatory standards to support defense-related manufacturing, with compliance verified throughout the supply chain to satisfy Department of Defense mandates. The subcontract is issued under NAICS code 331110, indicating classification within the iron and steel mills and ferroalloy manufacturing sector, and is managed by the Defense Logistics Agency under the Department of Defense. All materials must be sourced, processed, and fabricated entirely within the United States or its possessions to comply with DFARS restrictions on foreign-origin content, making domestic sourcing a non-negotiable requirement. The contract is structured as a subcontract, implying the awardee provides materials to a prime contractor or higher-tier supplier operating within the defense industrial base. The absence of specific place of performance details or point of contact suggests logistical coordination will be handled directly between the parties, with oversight administered through DLA systems. The posting date of July 20, 2026, indicates this is a future-facing procurement, likely part of long-term planning to secure critical material streams for defense systems.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Metal Coupling ComponentsThe contract involves the supply of certified high-strength alloy or stainless steel bar stock and forgings specifically intended for the manufacturing of flexible shaft couplings that meet stringent military material standards. The materials must be produced to exacting specifications to ensure compatibility with defense-grade applications, emphasizing durability, performance under extreme conditions, and full compliance with required military certifications. The product is a critical component in mechanical systems used by the Department of Defense, and the material must be traceable, tested, and documented to verify adherence to industry and regulatory benchmarks. This is a subcontract under the Defense Logistics Agency, categorized under NAICS code 331110 for steel mill and iron foundry operations, and is posted for potential suppliers to respond to the needs of the Department of Defense procurement chain. The materials are to be delivered to designated locations as required by end-use manufacturing processes supporting military equipment. While no specific set-aside or small business preference is indicated, the contract demands rigorous quality control, precise material composition, and reliable fulfillment timelines to ensure uninterrupted production of mission-critical coupling components.

Defense Logistics Agency

POSTED

DEADLINE

Supply of High-Yield Strength Quenched and Tempered Steel Plate (HY-80)The contract entails the supply and delivery of one unit of HY-80 alloy steel plate, specifically 2 inches thick, 84 inches wide, and 240 inches long, with a primer coating and processed through quenching and tempering to meet high-strength structural requirements. This material is designated for use at the Pearl Harbor Naval Shipyard, indicating its critical role in naval vessel maintenance or construction. The steel conforms to industry standards for high-yield strength applications and is sourced under a subcontract tied to the Department of Defense, managed by the Defense Logistics Agency. The NAICS code 331110 confirms the classification under the iron and steel manufacturing sector, underscoring the specialized nature of the product and its alignment with defense supply chain protocols. Although the solicitation number and precise delivery location are not provided, the contract is publicly accessible via a DIBBS portal link, ensuring transparency and traceability for procurement compliance.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aerospace FastenersThe contract obligates the supplier to provide high-grade alloy or stainless steel bar stock specifically engineered for the precision machining of aerospace fasteners compliant with NAS623 specifications. All material must meet stringent quality standards and include full material traceability from origin through final delivery, ensuring every batch can be verified for composition, heat treatment, and mechanical properties. The supply is intended to support critical aerospace applications where dimensional accuracy, stress resistance, and reliability are non-negotiable. This is a subcontract under the Department of Defense’s Defense Logistics Agency, classified under NAICS code 331110 for steel mills and ferroalloy manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with the rigorous compliance and documentation requirements typical of defense contracting. While the place of performance and point of contact are unspecified, the contract is linked to a DLA award system and requires adherence to federal procurement protocols, including quality assurance protocols and delivery schedules dictated by aerospace industry norms.

Defense Logistics Agency

POSTED

DEADLINE

Specialty Metals SupplierThe contract pertains to the supply of components or raw materials requiring specialty metals such as steel, nickel, and titanium alloys, which must be melted or produced in the United States or in countries qualifying under the Defense Federal Acquisition Regulation Supplement. This requirement ensures compliance with domestic sourcing mandates for defense-related materials. The contract is structured as a subcontract under the North American Industry Classification System code 331110, which aligns with the iron and steel mill and steel product manufacturing sector, indicating the nature of the materials being procured. The agency responsible is the Defense Logistics Agency within the Department of Defense, reflecting the defense-focused nature of the procurement. The solicitation was posted on July 20, 2026, and the contract is identified by the award number SPE4A623D5946 with a delivery order SPE4A626F256V. Although no specific place of performance or point of contact is listed, the requirement implies that suppliers must demonstrate origin compliance for all specialty metals used in the delivered goods. The absence of a set-aside designation suggests the contract is open to all qualified vendors meeting DFARS compliance, with no preference given to small businesses or other categories. The contractual obligation centers strictly on material origin, making adherence to the specified metallurgical sourcing standards the primary condition for award and performance.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply (Alloy Steel for Roller Chain)The contract calls for the supply of alloy steel bar stock or precision tubing specifically engineered for use in roller chain components, with strict adherence to the military specification MIL-C-47041. All materials must provide full traceability back to原始 mill certifications and heat lot numbers to ensure material integrity and compliance with defense-grade standards. The procurement is structured as a subcontract under the NAICS code 331110, indicating involvement in the steel milling and rolling industry, and is managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by August 4, 2026, with bidders expected to meet rigorous quality and documentation requirements to qualify for award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

BAR, METALThe contract specifies the procurement of 8 feet of aluminum alloy 6061 in T-651 temper, supplied in round rolled bars with a 5.250 inch diameter, delivered in whole-foot lengths of 10, 11, or 12 feet, with a permitted quantity variance of plus or minus 10 percent. All material must conform to technical standards including SAE AMS4117M, ASTM B666/B666M-20, and ASTM B660-23, and require a Certificate of Quality Compliance, or mill certification, included with each shipment and submitted to the DLA Troop Support Contracting Officer. Strict marking requirements mandate that each unit be labeled with the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, using approved methods such as stamping or stenciling without contamination or degradation of the material. Adhesive labels are mandatory for smaller diameter bars, tubes, and shapes under 0.250 inches nominal OD. Packaging must follow MIL-STD-2073-1E and RP001 DLA packaging guidelines, including preservation per ASTM B660 and marking as per MIL-STD-129R, with special codes ZZ applied where applicable. Delivery is FOB origin to Tracy, California, with a required delivery date of September 23, 2026, and an actual delivery order date of 167 days. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviation from this requirement must be explicitly declared; failure to comply may constitute an unauthorized substitution subject to criminal and civil penalties. Supplier qualification under the QSL program waives the need for government inspection, with quality conformance assured through the QSLD listing. Continuous identification and compliance with CDRL-METALSCERT are mandatory, and all documentation must align with the DLA Master List of Technical and Quality Requirements.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Domestic-Origin Material Supply (Bearing Components)The contract requires the supply of raw materials and sub-components, including steel rings, balls, cages, and lubricants, that originate from the United States, its outlying areas, or Canada, with the explicit condition that over 50 percent of the total component cost must comply with DFARS 252.225-7016, ensuring domestic sourcing for bearing components. This subcontract is focused on fulfilling defense-related procurement standards by prioritizing materials with verifiable origin in eligible regions, thereby supporting national security and regulatory compliance goals. The solicitation is issued under the NAICS code 331110, corresponding to steel rolling and drawing, and is managed by the ASC Commodities Division of the Department of Defense. The place of performance is designated as Albany, Georgia, with a response deadline of July 27, 2026. The opportunity was posted on July 19, 2026, and bidders must ensure all materials meet the specified origin requirements to qualify. All submissions must adhere to the terms outlined in the DFARS clause to secure award consideration.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Fuel Additive Supply (FSII, SDA, CI/LI)The contract entails the supply of aviation fuel additives including Fuel System Ice Inhibitor FSII, Static Dissipative Additive SDA, and Corrosion Inhibitor/Lubricity Improver CI/LI in either bulk or pre-mixed formulations, all of which must meet rigorous military performance specifications to ensure seamless integration into operational fuel batches. These additives are critical for maintaining fuel system integrity, preventing ice formation, managing static discharge, and inhibiting corrosion across a wide range of environmental and operational conditions encountered by military aviation platforms. The award is structured as a subcontract under the Defense Logistics Agency within the Department of Defense, with the North American Industry Classification System code 325992 indicating specialty chemical manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to support defense operations without geographic restrictions specified, implying nationwide or global applicability. The contract does not indicate a set-aside classification or specific point of contact, suggesting a broad procurement approach aimed at qualified suppliers capable of meeting stringent military quality and delivery requirements for mission-critical fuel additives.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

DEADLINE