Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

High-Performance Software-Defined Radio (SDR) System Supply

Active

Federal

Response Deadline08/14/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply and delivery of a commercially available high-performance software-defined radio system equivalent to the NI USRP X420, requiring full integration of firmware, software, power supplies, cabling, and all necessary accessories. The system must be new, factory-sealed, and procured exclusively from an authorized U.S. distributor to ensure authenticity and compliance with technical standards. All components must be delivered as a complete, operational unit ready for immediate deployment without requiring additional configuration or parts. This is a small business set-aside subcontract under NAICS code 334220, awarded by the Department of Commerce through NIST, with performance located in Gaithersburg, Maryland. The solicitation was posted on July 31, 2026, and responses are due by August 14, 2026. The requirement emphasizes strict adherence to sourcing guidelines and system equivalence to ensure compatibility with existing infrastructure and operational performance benchmarks. Only qualified small businesses may respond, and delivery must align with the designated place of performance to support government missions requiring secure, reliable, and high-performance radiofrequency capabilities.

General Info

Small business subcontract for new NI USRP X420 software-defined radio system delivery to Gaithersburg, Maryland.

Agency

Department Of Commerce NistView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

Gaithersburg, MD, 20899, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 04:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Commerce Nist

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Commerce Nist

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of a commercially available high-performance SDR system equivalent to the NI USRP X420, including full integration, firmware, software, power supplies, cabling, and accessories. Must be new, factory-sealed, and sourced from an authorized U.S. distributor.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M1-26-T-218S

The contract involves the procurement of five antennas with NSN 5985-01-682-0443 under solicitation SPE7M1-26-T-218S, issued by the Maritime Supply Chain branch of the Department of Defense. Delivery is required within 95 days after order placement, with a firm delivery date of October 14, 2027, and a need ship date of November 3, 2026. The place of performance is the DDSP New Cumberland Facility in Pennsylvania, with FOB Origin terms applying. The total contract value is $25.00, based on a unit price of $5.000 per unit. Packaging, preservation, and marking must strictly follow Special Packaging Instruction AK16820443 Revision B, MIL-STD-2073-1E, and MIL-STD-129, including barcoding and labeling requirements. All hazardous materials must comply with OSHA’s Hazard Communication Standard, require pre-award submission of Safety Data Sheets, and be labeled according to federal regulations, with updates mandatory throughout performance. The contractor is prohibited from using foreign-flag vessels without 45 days’ prior written notice and documented efforts to secure U.S.-flag alternatives. Invoicing must be conducted through the Wide Area WorkFlow system, with payment routed via Department of Defense Activity Address Codes. The contract includes extensive compliance clauses under the Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement, covering cybersecurity requirements including NIST SP 800-171, safeguarding of contractor information systems, employment eligibility verification, combating human trafficking, sustainable products, and small business subcontractor payment acceleration. Offerors must provide UEI and CAGE codes if supplying covered defense telecommunications equipment, and are required to affirm their size status and socioeconomic category eligibility, including participation in small business programs. The solicitation explicitly excludes detailed technical specifications in Section C, directing compliance to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Proposals must be submitted electronically via the DLA Internet Bid Board System by August 5, 2026, with technical inquiries routed through designated DLA portals.

MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE7M5-26-T-337R

The contract pertains to the procurement of an antenna with NSN 5985-01-476-4910 and part number 7514081-917, for a total quantity of four units, under solicitation SPE7M5-26-T-337R. Delivery is required within 154 days after award, with a need ship date of January 2, 2027, and an original delivery deadline of January 9, 2027. The item must be shipped FOB origin to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, and inspected and accepted at the destination. Packaging must comply with DLA’s RP001 requirements, with hazardous materials packaged per TQ Requirement IP025 and non-hazardous materials in accordance with ASTM D3951, though all DLA Master List requirements supersede commercial standards. All packaging and labeling must meet MIL-STD-129, and each unit must bear a permanent Item Unique Identification (IUID) per MIL-STD-130. The contract mandates compliance with CMMC Level 2 self-assessment and safeguarding of covered defense information under DFARS 252.204-7012, with adherence to NIST SP 800-171 assessment requirements. Payment must be processed electronically through WAWF, and invoicing and receiving reports are subject to DFARS clauses 252.232-7003 and 252.232-7006. The contract includes a full suite of FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity, hazardous materials prohibitions, export control, and whistleblower protections. Offers must be submitted electronically via DIBBS by the deadline of July 31, 2026, and include UEI, CAGE code, and socioeconomic status certifications if applicable. No pricing data is provided in the CLIN, and the contract type remains undetermined pending award. The procurement is subject to a zero percent quantity variance, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date.

ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

Portable Two-Way Radio SupplyThe contract seeks the supply of fifty-two portable two-way radios that meet P25 Phase 1 and 2 standards, ensuring compliance with public safety communication requirements. These devices must operate across 700/800 MHz and VHF frequency bands to enable seamless interoperability between federal, state, and local emergency response agencies. The radios are intended to support unified communication efforts in critical public safety scenarios, emphasizing reliability, clarity, and cross-system compatibility. Delivery and performance are expected to occur in Montrose, with a zip code of 10548-1454, indicating the physical location where the equipment will be deployed and utilized. This subcontract, classified under NAICS code 334220 for Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing, is managed by the Department of Veterans Affairs through its 242-NETWORK Contract Office 02 (36C242). The solicitation was posted on July 31, 2026, and responses are due by August 6, 2026, at 3:00 PM. While no set-aside criteria or point of contact details are specified, the requirement is structured to support national public safety infrastructure and demands full adherence to technical specifications for frequency range, interoperability, and compliance with the P25 standards. All proposals must align with these operational and regulatory benchmarks to qualify for award.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Subcontractor for Critical Telecom Components (Supplier Role)The contract obligates the supplier to provide and support compliant telecommunications hardware including routers, gateways, and analog terminal adapters, with strict adherence to federal prohibitions on equipment from sanctioned vendors such as Huawei and ZTE. All supplied components must meet established security and compliance standards, ensuring the integrity of critical telecom infrastructure used by U.S. defense systems. The work is tied to a specific performance location in Cheyenne, Wyoming, with a delivery and support timeline governed by the contract’s active period beginning in July 2026 and requiring responses by late August 2026. The subcontract falls under NAICS code 334220, classifying it within the telecommunications equipment manufacturing sector, and is administered by the Department of Defense through its W7N9 Uspfo Activity organization. Only approved vendors may participate, and compliance with all national security directives regarding supply chain risk is mandatory throughout the delivery and support lifecycle.

W7N9 Uspfo Activity Wy Arng

POSTED

DEADLINE

Fire Detection Device Supply and Installation SupportThe contract entails the supply and installation support for a comprehensive fire detection system, including intelligent smoke detectors such as the XP series transponders, duct detectors, and monitor modules, all equipped with advanced features like drift compensation, automatic sensitivity calibration, and maintenance alerting mechanisms to ensure ongoing compliance with NFPA 72 standards. These devices are designed to enhance early fire detection accuracy and reduce false alarms through adaptive sensing technology and real-time system diagnostics. Installation support must align with strict performance and integration requirements to ensure seamless operation within existing infrastructure at the designated site. Performance is required at Cherry Point, North Carolina, with a submission deadline of August 5, 2026, and the solicitation is classified as a subcontract under NAICS code 334220, indicating a focus on electronic manufacturing for communication and sensing equipment. The contracting authority is the Naval Facilities Engineering Systems Command Mid-Atlantic, a division of the Department of Defense, underscoring the critical nature of the fire safety systems for military or government facilities. All supplied equipment and installation procedures must meet federal fire safety mandates without exception, and the contractor is expected to deliver fully functional, fully compliant systems ready for immediate deployment and long-term reliability.

Navfacsyscom Mid-Atlantic

POSTED

DEADLINE

Fire Alarm Control System IntegrationThe contract requires the design, configuration, and integration of the IFC-3030 fire alarm control panel with existing base-wide life safety and security systems at Cherry Point, North Carolina, ensuring full compliance with UL 864, UL 1076, and NFPA 72 standards. The work involves seamless compatibility with current infrastructure to maintain operational integrity and regulatory adherence across the facility’s life safety network. The subcontract is classified under NAICS code 334220, indicating a focus on communication equipment manufacturing, and is managed by the Department of Defense through Navfacsyscom Mid-Atlantic. All deliverables must be completed by the response deadline of August 5, 2026, with performance obligations centered on the specified location to support federal installations' safety and emergency response capabilities.

Navfacsyscom Mid-Atlantic

POSTED

DEADLINE

64T64R mMIMO Antenna SupplyThe contract calls for the procurement of a single 64T64R massive MIMO antenna designed to be fully compatible with Nokia’s 5G gNB solution for outdoor deployment conditions. The requirement emphasizes technical alignment with Nokia’s existing 5G infrastructure, ensuring seamless integration, optimal performance, and compliance with industry standards for high-capacity, wide-coverage wireless networks. The antenna must meet stringent environmental resilience specifications to operate reliably in varied outdoor climates without degradation in signal quality or durability. This procurement is structured as a subcontract under the Department of Commerce’s National Institute of Standards and Technology, with the North American Industry Classification System code 334220 indicating a focus on telecommunications equipment manufacturing. The solicitation was posted on July 31, 2026, with responses due by August 9, 2026, at 4:00 PM Eastern Time. While no set-aside preferences or specific geographic performance location are detailed, the contract requires delivery and integration readiness for deployment in field environments, with the expectation that the supplier will provide a fully tested, certified, and installation-ready unit. Any proposal must demonstrate technical compliance, proven supply chain reliability, and adherence to all relevant performance benchmarks associated with 5G mmWave and sub-6 GHz spectrum support.

Department Of Commerce Nist

POSTED

DEADLINE

5G Outdoor Baseband Unit (BBU) SupplyThe contract is for the procurement of a single Nokia 5G Outdoor Baseband Unit (BBU) to be integrated into the National Institute of Standards and Technology’s 5G testbed, supporting advanced wireless research and development. The solicitation is classified as a subcontract under NAICS code 334220, which pertains to wireless communication equipment manufacturing, and was posted on July 31, 2026, with a response deadline of August 9, 2026. The contracting entity is the Department of Commerce, specifically NIST, which will be the primary beneficiary of the unit’s deployment for testing and evaluation purposes within its secure 5G infrastructure. The place of performance and specific delivery location are not detailed in the provided data, nor is there information on a point of contact or set-aside provisions, indicating the procurement may be open to general industry respondents without specific socioeconomic preferences. The unit must meet technical compatibility and performance requirements essential for seamless integration into NIST’s existing testbed environment. Although no funding amount or payment terms are included, the urgency of the response window suggests an emphasis on timely delivery to support ongoing or upcoming experimental trials in 5G technology. The contract’s sole purpose is to enable technical validation and experimentation, reinforcing NIST’s role in advancing next-generation communication standards.

Department Of Commerce Nist

POSTED

DEADLINE

Radio Equipment

Solicitation # W911S226U3674

The contract titled Radio Equipment under solicitation number W911S26U3674, posted on July 13 2026 with a response deadline of July 20 2026 at 5:00 PM, seeks stage radio communication equipment for the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum New York. The North American Industry Classification System code 334220 indicates this procurement is related to radio and television broadcasting and communications equipment manufacturing. The opportunity is classified as combined and does not specify any set aside for small businesses or other categories. Performance is expected to occur at a location with a zip code of 22211 though the exact city and state are not provided. Primary point of contact for inquiries is Colin Murray who can be reached via email at colin.r.murray.mil@army.mil or by phone at 7032838482. Interested parties must submit responses before the deadline through the SAM.gov workspace portal linked in the contract details.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Software-Defined Radio

Solicitation # 1333ND26QNB670444

This solicitation seeks a Firm Fixed Price quotation for a High-Performance Software-Defined Radio equivalent to the USRP X420, issued under the Revolutionary FAR Overhaul Part 12 for commercial products. The requirement is a sole-source procurement due to the critical compatibility of National Instruments hardware and software with NIST’s existing 5G/6G and Open RAN research platform; substituting alternative equipment would necessitate extensive redevelopment and testing, jeopardizing ongoing research activities. The procurement is a total small business set-aside under NAICS code 334220, with a small business size standard of 1,250 employees, limiting eligibility to small businesses only. All quotations must be submitted electronically by August 14, 2026, at 12:00 PM ET to the designated contract specialists, and offerors must maintain an active SAM.gov registration at the time of submission. Quotations must be divided into two volumes: Volume I, the Technical Response, which must not exceed five single-spaced pages and must provide verifiable evidence of compliance with all technical specifications, including manufacturer documentation, product literature, country of origin, authorization from the manufacturer, delivery capability, and warranty confirmation; and Volume II, the Price Quotation, which must include a firm fixed price for each line item, total aggregate price inclusive of all shipping and delivery costs under FOB Destination terms, point of contact details, UEI number, and any applicable discount or tariff charges. Tariffs for non-U.S.-origin products must be itemized by country and percentage. Evaluation will follow the Lowest Price Technically Acceptable (LPTA) method, awarding to the responsible offeror whose quotation is technically acceptable and submitted at the lowest price. Failure to address any mandatory requirement may render a quotation unacceptable. All questions must be submitted by August 7, 2026, and only amendment-published responses will govern performance. Delivery is required within 75 days after order receipt to Gaithersburg, Maryland.

Department Of Commerce Nist

POSTED

DEADLINE

CIRG MESH Technology Program

Solicitation # 15F06726R0000239

The Federal Bureau of Investigation is seeking to expand its tactical communications capabilities through a total small business set-aside solicitation for the CIRG MESH Technology Program, identified by solicitation number 15F06726R0000239. This procurement is exclusively for Persistent Systems Wave Relay radios and associated components including RF modules, antennas, and accessories to maintain full compatibility with the FBI’s existing infrastructure. The requirement is brand-name only, ensuring seamless interoperability and operational continuity with currently deployed systems. The solicitation is open to small businesses only under the SBA Total Small Business Set-Aside designation, with a NAICS code of 334220 indicating classification under Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing. Proposals must be submitted by August 31, 2026, and the contract will be managed by the FBI’s office within the Department of Justice in Washington, DC, with performance expected to occur primarily in Quantico, Virginia. The primary point of contact for inquiries is Holly Cloud, reachable via email at hcloud@fbi.gov. All equipment acquired through this contract will enhance the FBI’s Mobile Ad Hoc Network capacity, supporting critical field operations with robust, secure, and resilient wireless communications.

POSTED

DEADLINE

in about 1 month

Land Mobile Radio - Subscriber Equipment

Solicitation # LMR_SE

The 673d Communications Squadron at Joint Base Elmendorf-Richardson is seeking to upgrade its existing Motorola APX 6000 Land Mobile Radio fleet through a limited sources acquisition targeting either AEG or Ewings as potential contractors. This hardware refresh is essential to replace end-of-life equipment and ensure compatibility with the newly mandated frequencies of the State of Alaska’s upgraded LMR network, which is critical for maintaining uninterrupted communication capabilities across military, joint, and coalition operations. The modernization supports the squadron’s mission to provide reliable communications and emergency response infrastructure for all units stationed at JBER, directly aligning local radio systems with the state’s regional communications backbone to prevent operational disruptions. The acquisition is formalized under the solicitation number LMR_SE with a posting date of July 31, 2026, and a response deadline of August 30, 2026. Classified under NAICS code 334220 for communications equipment manufacturing, the effort is managed by the Department of Defense through the FA5000 673 Cons Lgc office located at JBER, Alaska. Primary point of contact is Robert Hensler, with Hannah Tolbert as the secondary contact, both reachable via provided phone numbers and email addresses. The contract requires delivery and installation of subscriber equipment to be performed at JBER, ensuring seamless integration with existing systems and adherence to federal communication standards for defense operations.

FA5000 673 Cons Lgc

POSTED

DEADLINE

More opportunities from Department Of Commerce Nist

Same awarding agency

Secure Delivery and Logistics to NIST CampusThe contract pertains to the secure transportation and final delivery of the SDR system to the National Institute of Standards and Technology’s Gaithersburg, Maryland facility under F.O.B. Destination terms, meaning the vendor assumes full responsibility for the shipment until it reaches the designated receiving location. Successful performance requires close coordination with NIST’s on-site receiving staff, strict adherence to a predefined delivery schedule, and full compliance with all campus access protocols, including security clearances, vehicle restrictions, and personnel screening procedures. The delivery must be executed with precision to ensure the integrity and safety of the sensitive equipment throughout transit and upon arrival. This subcontract is designated as a Small Business Set Aside under NAICS Code 484220, indicating it is reserved exclusively for small businesses in the truck transportation industry. The opportunity was posted on July 31, 2026, with responses due by August 14, 2026, and is managed by the Department of Commerce through NIST. Performance is required entirely at the Gaithersburg campus with a ZIP code of 20899. Bidders must demonstrate capability in handling high-security logistical operations, maintaining schedule integrity, and navigating federal facility requirements to meet the stringent expectations of the contracting entity.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Technical Documentation and Compliance PackagingThe contract requires the preparation and submission of comprehensive technical compliance documentation for products, including detailed specifications, country of origin statements, warranty terms, manufacturer authorization letters, and forms that meet Federal Acquisition Regulation requirements. All documentation must be accurate, complete, and fully aligned with federal procurement standards to ensure eligibility and compliance. Additionally, the contractor is responsible for packaging and labeling goods in strict accordance with F.O.B. Destination guidelines, ensuring proper handling, tracking, and delivery compliance. This is a Small Business Set Aside subcontract under NAICS code 541611, awarded by the Department of Commerce through its National Institute of Standards and Technology. The solicitation was posted on July 31, 2026, with a response deadline of August 14, 2026, and performance is expected to be conducted at Gaithersburg, Maryland, with a zip code of 20899. The opportunity is reserved exclusively for small businesses, emphasizing support for small business participation in federal technical and compliance services.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Technical Support and Beamforming Test AssistanceThe contract seeks ongoing technical support and specialized beamforming test assistance related to the deployment and post-deployment phases of 5G communication systems. This subcontract is issued by the Department of Commerce through its National Institute of Standards and Technology and is classified under NAICS code 541330, indicating it involves scientific and technical consulting services. The work requires expert-level capabilities in beamforming methodologies to ensure accurate performance validation, system optimization, and troubleshooting during and after 5G infrastructure rollouts. The solicitation was posted on July 31, 2026, with a response deadline of August 9, 2026, allowing potential contractors a limited window to submit proposals. The place of performance and specific location details are not defined, suggesting flexibility in execution, potentially encompassing remote support or on-site work at various NIST facilities or test environments. No set-aside provisions are indicated, meaning the opportunity is open to all eligible entities regardless of business size or ownership characteristics.

Engineering Services

POSTED

DEADLINE

On-Site 5G System Installation and CommissioningThe contract calls for full on-site installation and commissioning services for a 5G system at the National Institute of Standards and Technology facility in Gaithersburg, Maryland, with specific requirements including staging, system commissioning, RAN LLD documentation, and beamforming test support. All work must be performed at the designated NIST location and is intended to ensure the proper deployment and validation of advanced wireless infrastructure for research and testing purposes. The task is structured as a subcontract under NAICS code 238990, with a response deadline of August 9, 2026, and a solicitation posted on July 31, 2026, indicating a limited window for qualified vendors to submit proposals for this specialized technical engagement.

All Other Specialty Trade Contractors

POSTED

DEADLINE

5G Software Licensing and Annual RAN CARES SupportThe contract titled 5G Software Licensing and Annual RAN CARES Support entails the provision of 5G main software, associated Value Pack licenses, and annual RAN CARES Bronze technical support services. This subcontract is issued under the NAICS code 511210 by the Department of Commerce, specifically through its NIST division, and encompasses both a base period and optional extension periods to ensure continuous software functionality and technical assistance. The licensing components are critical for enabling and maintaining 5G network infrastructure, while the Bronze-level support ensures baseline maintenance, troubleshooting, and updates throughout the contract term. The solicitation was posted on July 31, 2026, with a deadline for responses set for August 9, 2026, indicating a short but standard procurement window typical for technical software and support agreements. The place of performance and office address details are not specified, suggesting that delivery and support may be delivered remotely or according to vendor capabilities. This agreement is structured as a subcontract, implying the work will be performed by a third-party vendor in support of the Department of Commerce’s broader technological initiatives, likely related to advancing next-generation communications systems under NIST’s mission.

Software Publishers

POSTED

DEADLINE

Comb Stabilization Modules

Solicitation # NB6720002602020

The U.S. Department of Commerce, National Institute of Standards and Technology (NIST), is seeking information from industry providers regarding the availability and capabilities of suppliers to deliver Comb Stabilization Modules for use at its Boulder site. These modules are critical for stabilizing carrier-envelope offset frequencies in 1550 nm femtosecond frequency comb systems used in advanced applications such as electro-optic sampling, timing synchronization, and dual-comb waveform metrology. NIST is not issuing a solicitation or making any commitment at this stage; this notice is strictly for market research to evaluate vendor participation and determine the optimal acquisition path. The requested products fall under Product Service Code 6625 and NAICS Code 334515, which covers the manufacturing of instruments for measuring and testing electricity and electrical signals. Respondents must submit responses by July 20, 2026, to lia.arthofer@nist.gov in Microsoft Word or PDF format, limited to ten pages excluding cover pages and commercial pricing. Submissions must include company details, Unique Entity ID, SAM.gov registration status, validation of small business status under the specified NAICS code, and compliance with FAR clause 52.219-14 if applicable. Vendors are encouraged to suggest improvements to the draft requirements, propose evaluation factors for a future acquisition, and provide standard commercial pricing data to aid in fair market pricing estimation. Submissions must not include proprietary, classified, or sensitive information, nor should they contain formal proposals—only informational responses. Teaming arrangements are permitted but require full information from all participating entities. NIST retains full rights to use all submitted information for market research and future acquisition planning without obligation to provide feedback or compensation. Responses received after the deadline may not be considered, and no contract award is guaranteed based on this request.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Site Effluent System

Solicitation # 1333ND26RNB190022

The solicitation for the Gaithersburg Site Effluent Treatment System, identified by number 1333ND26RNB190022, is a reissued opportunity aimed at fully reconstructing the aging and deteriorated treatment system located on the NIST campus in Gaithersburg, Maryland. Originally constructed in the mid-1990s to meet Washington Sanitary Sewer Commission effluent standards, the system has since become nonfunctional due to severe structural and mechanical failures. Critical components including the wet tank’s interior floor supports, aluminum grating, blowers, heaters, stir mechanism, and explosion-proof electrical systems are corroded, seized, or completely inoperable, rendering the facility unsafe for access and unable to meet current regulatory and life safety codes. The scope requires a complete overhaul: installation of a new structural floor and support framework, epoxy lining of the wet tank, replacement of all ventilation and heating systems, a new agitation motor and shaft, modern pH monitoring and data signaling, upgraded lighting and electrical outlets, and full replacement of all hazardous-area electrical wiring and conduit. All work must comply with current applicable regulations and standards. The contract is set aside exclusively for Women-Owned Small Businesses under NAICS code 561210, with proposals due by August 4, 2026, and award based on best value to the government, evaluated across Technical Approach, Schedule, and Price—though specific weighting criteria are not disclosed. Performance is expected to be completed within 200 days from Notice to Proceed, and a second site visit is scheduled per the attached amendment to ensure offerors fully understand the site conditions. Questions must be submitted by June 18, 2026, to the designated point of contact, Sasha Bradford, via email. While no detailed pricing structure, CLINs, or contract administration details are provided, submission must include comprehensive technical methodology, a feasible execution timeline, and a clear price proposal. All work is to be performed on-site at the NIST campus in Gaithersburg, Maryland, with no mention of packaging, marking, or delivery terms, and no additional bonding or insurance requirements specified within the available documentation.

Facilities Support Services

POSTED

DEADLINE

Metrology-grade Chilled Mirror Dew Point Hygrometers

Solicitation # 1333ND26QNB680396

The Department of Commerce, National Institute of Standards and Technology, is soliciting proposals for metrology-grade chilled mirror dew point hygrometers under solicitation number 1333ND26QNB680396. This combined procurement requires highly accurate instruments capable of measuring dew point with traceability to national standards, intended for use in calibration, research, and precision environmental monitoring applications. Proposals must demonstrate technical compliance with metrology-grade specifications, including performance benchmarks, traceability documentation, and calibration protocols aligned with NIST requirements. The contract will be awarded to a vendor capable of delivering equipment that ensures long-term stability, minimal drift, and rigorous repeatability under controlled laboratory conditions. The solicitation was posted on July 31, 2026, with a response deadline of August 11, 2026, at 3:00 PM Eastern Time. All responses must be submitted through the SAM.gov portal, and performance is expected to occur at the NIST facility in Gaithersburg, Maryland, 20899. The North American Industry Classification System code is 334516, indicating instruments and laboratory equipment manufacturing. The sole point of contact for inquiries is Forest Crumpler, reachable via email at forest.crumpler@nist.gov. There is no set-aside designation for this solicitation, meaning it is open to all eligible vendors regardless of business size or ownership status.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Polarization-Entangled Photon Source

Solicitation # NB6760202601970

The U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) is seeking information from industry providers regarding the availability of a polarization-entangled photon source based on spontaneous parametric down-conversion using a periodically poled lithium niobate waveguide. This sources sought notice, identified as NB676020-26-01970, is for market research purposes only and does not constitute a solicitation, obligation, or commitment to award a contract. NIST requires a system capable of accepting an external pump laser to generate high-quality polarization-entangled photon pairs, with delivery, installation, and training anticipated within 16 weeks of order receipt. Respondents must submit information by July 16, 2026, including company details, Unique Entity ID, SAM.gov registration status, size certification under NAICS code 334515, and any suggestions to improve the draft specifications. Responses are limited to ten pages excluding cover pages and commercial pricing, must be in Word or PDF format with 12-point font, and must not include proprietary, classified, or confidential material. Companies are encouraged to provide standard commercial pricing, suggest evaluation factors for a future acquisition, and confirm compliance with FAR clause 52.219-14 if they are small businesses and intend to pursue a total small business set-aside. Evidence of existing federal contracts such as a GSA Multiple Award Schedule must also be included if applicable. Team responses must include all required information for each participating entity. NIST will use submitted information to determine the most effective acquisition strategy and may publish a formal solicitation on SAM.gov or GSA eBuy afterward. Responses are voluntary, and NIST is under no obligation to award a contract or provide feedback. Information provided may be used for any legally appropriate purpose, and late submissions may not be considered.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Upright Freezers

Solicitation # 1333ND26QNB640394

The solicitation编号1333ND26QNB640394 issued by the Department of Commerce’s National Institute of Standards and Technology (NIST) seeks firm-fixed-price quotations for six upright ultra-low temperature freezers to be delivered to NIST’s Gaithersburg, Maryland facility for the secure storage of Standard Reference Materials. The contract is a total small business set-aside under NAICS code 334516, with a size standard of 1,000 employees, and requires offerors to be certified as small businesses in SAM.gov with a valid Unique Entity Identifier. The required freezers must maintain a minimum internal temperature of -86°C, feature CFC-free refrigerants, digital controls with battery backup, audible and visual alarms for temperature deviation and power failure, stainless-steel interiors, 208/230V power compatibility, rolling casters, and at least one RS232 output for external monitoring. All units must be delivered fully assembled, with no on-site assembly permitted. An optional three additional units may be ordered within 12 months of award, with delivery due within 30 days of option exercise. The award will be made on a lowest price, technically acceptable basis, where quotations must first pass a binary technical acceptability review before price is evaluated. Delivery is required at NIST’s 100 Bureau Drive, Gaithersburg facility with FOB Destination terms, meaning risk transfers upon receipt at the delivery point. Acceptance is conducted on-site by a NIST Subject Matter Expert using a pass/fail evaluation based on compliance with detailed technical specifications contained in the solicitation, with no reference to MIL-STDs or external standards. Invoices must be submitted electronically via the Invoice Processing Platform (IPP) or email to INVOICE@NIST.GOV, as mandated by NIST local policies. The contract incorporates numerous Federal Acquisition Regulation clauses, including mandatory provisions on whistleblower rights, prohibition of inverted domestic corporations, Buy American requirements, combating human trafficking, equal opportunity, and sustainable product practices, all of which include deviations effective January 2026. Contractors must comply with SAM.gov registration and maintenance obligations, and all representations regarding size, socioeconomic status, domestic content, and manufacturing origin are completed by offerors directly in SAM.gov and incorporated by reference. Personnel accessing NIST facilities must adhere to visitor protocols and facility access procedures but are not required to hold security clearances. The contract does not specify packaging, marking, barcoding

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE