Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

High-Resolution Optical Sensor Supply

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of high-resolution, low-noise image sensors designed for use in whole-slide imaging scanners, with a minimum resolution requirement of 0.50 micrometers per pixel at 20x magnification. These sensors must deliver exceptional optical clarity and minimal noise to ensure accurate digital capture of histological specimens, meeting stringent performance standards critical for diagnostic and research applications. The sensors are intended for integration into medical imaging systems under the oversight of the FDA Office of Acquisition and Grant Services, a division of the Department of Health and Human Services. The opportunity is classified as a subcontract with a NAICS code of 334417, indicating focus on semiconductor and related device manufacturing. The place of performance is designated as Silver Spring, Maryland, with a 20993 ZIP code, and responses are due by August 7, 2026, at 4:00 PM Eastern Time. The solicitation was posted on July 24, 2026, and bidders must ensure their proposals align with the technical specifications and delivery expectations outlined by the agency. No set-aside status or point of contact information is specified, and all submissions must be made through the official SAM.gov portal linked in the contract posting.

General Info

Supply of high-res, low-noise image sensors for medical scanners, due August 7, 2026, in Silver Spring, Maryland.

Agency

Department Of Health And Human Services → FDA Office Of Acq Grant SvcsView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

Silver Spring, MD, 20993, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Health And Human Services → FDA Office Of Acq Grant Svcs
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Health And Human Services → FDA Office Of Acq Grant Svcs
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of high-quality, low-noise image sensors capable of achieving at least 0.50 µm/pixel resolution at 20x magnification for use in the WSI scanner.

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
Qualified Electrical Connector Manufacturing (MIL-SPEC Compliant)The contract calls for the manufacture and supply of a military-specification electrical connector identified by part number M83723/72G2443N, which must fully comply with the stringent performance and design standards outlined in MIL-DTL-83723H and MIL-DTL-83723/72E. The product is required to be configuration-controlled and listed on the Qualified Products List to ensure it meets all federal defense specifications for reliability, durability, and interoperability in mission-critical applications. The connector will be produced under a subcontract arrangement, with quality assurance protocols aligned with Department of Defense requirements to guarantee consistent adherence to MIL-SPEC benchmarks throughout production. The solicitation was posted on July 24, 2026, with responses due by August 1, 2026, and falls under the NAICS code 334417, which pertains to the manufacturing of electronic connectors and components. The contracting activity is managed by the Active Devices Division under the Department of Defense, indicating the requirement stems from a direct military or defense system procurement need. Though specific location details for performance or point of contact are not provided, the contract is accessible via the DIBBS sourcing platform, and participation is likely restricted to qualified suppliers with established credentials in defense-grade electronics manufacturing.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThis contract specifies the procurement of a single electrical connector receptacle identified by NSN 5935-01-408-8412 and part number M83723/72G2443N, compliant with MIL-DTL-83723H Rev H and MIL-DTL-83723/72E Rev E standards. The item is subject to strict quality controls as it is listed on the Qualified Products List and must meet all requirements outlined in Procurement Note H01 for FSC 5935 connector assemblies and contacts. The use of ozone-depleting substances is strictly prohibited in any phase of manufacture or processing unless formal written approval is obtained from the contracting officer, and all packaging must adhere to MIL-STD-2073-1E and DLA’s proprietary packaging requirements, including marking per MIL-STD-129 with no special markings required. The item must be shipped via traceable means, explicitly excluding parcel post, and delivered to the specified government facility in Klamath Falls, Oregon. The pricing is firm fixed at one unit, with zero tolerance for variance in quantity, and delivery is mandated within 150 days after the order date. Inspection and acceptance occur at the destination point, with FOB origin terms applying. The contract is governed under DLA’s master technical and quality requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. All configuration changes require formal engineering change proposals for variance or waiver approvals. The solicitation number is SPE7M5-26-Q-0760, with a response deadline of August 1, 2026, and performance scheduled for delivery no later than June 29, 2026. The item falls under NAICS code 334417, procured by the Department of Defense through the Active Devices Division, with primary point of contact Shannon Tate.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRIThe contract specifies the procurement of a plug electrical connector identified by NSN 5935-01-106-4514 and part number MS90556C52413P, governed by technical standards MIL-DTL-22992H and MS90556J, both revised as of October 4, 2024. This is a qualified item subject to the Qualified Products List (QPL) requirements outlined in procurement note H01, and only manufacturers with approved CAGE codes—Amphenol (77820), Matrix (14283), and Pyle National (49367)—are eligible, provided their production dates fall outside the prohibited July 2006 to June 2016 range. The use of any class I ozone-depleting substances in manufacturing or processing is strictly prohibited without prior written approval from the contracting officer, though this restriction does not apply to commercial items as defined by FAR 11.001. All packaging must comply with DLA packaging requirements, MIL-STD-129 for marking and labeling, and ASTM D3951 for non-hazardous items, while hazardous materials must meet FED-STD-313 and TQ requirement IP025. Palletization must follow RP001 standards, and traceability documentation may be required to verify manufacturing origin and date. The contract requires delivery of 27 units FOB origin within 181 days, with no variance allowed in quantity, and acceptance is based on inspection at destination. The unit price is $27.00, totaling $729.00, with a required ship date of January 22, 2027. Packaging must adhere to the specified QUP of 001 and the unit of issue is each (EA). The delivery destination is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany, GA 31704-1128, with transportation details governed by DLAD Proc Notes C19 and C20. This solicitation, issued under SPE7M5-26-T-326E, was posted on July 24, 2026, with proposals due by July 29, 2026, and is managed
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract specifies the procurement of four electrical plug connectors identified by NSN 5935-01-369-5686 under solicitation SPE7M5-26-Q-0756, with a firm fixed price and zero tolerance for quantity variance. The item must comply with strict technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, including qualification standards from the Qualified Products List for Federal Stock Class 5935 connector assemblies and electrical contacts. It must be manufactured to TDP Revision A Generation 1 in accordance with MIL-DTL-83723H(4) Sup 1 and referenced specification MIL-DTL-83723/95G(1), with physical identification and bare item marking as required. Packaging must adhere to DLA-specific guidelines, including MIL-STD-129 labeling, and conform to either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with palletization following RP001. The unit of issue is each, and delivery is required at the DLA Distribution facility in New Cumberland, Pennsylvania, with a delivery deadline 169 days after order date. Inspection and acceptance occur at destination, and all packaging and marking must be performed in strict compliance with DLA directives that supersede commercial standards. The contract calls for transportation per DLAD procedural notes and lists the government point of contact and delivery details, with a scheduled ship date of January 15, 2027.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
Federal
Titanium ConnectorsThis solicitation is a combined synopsis and request for quote for commercial-grade connectors under RFQ N66604-26-Q-0479, issued by the Naval Undersea Warfare Center Division Newport. The requirement is strictly for Brantner & Associates (doing business as TE Connectivity) part numbers MSXL12BCRTI, MSXL10BCRTI, and MSXL8BCRTI, with ten units of each required. No alternative parts will be accepted due to the critical nature of modernization efforts and the prohibitive cost and delays associated with qualifying new connectors. Only authorized distributors of Brantner & Associates may respond, and proof of authorized distributor status must be provided. The contract will be awarded as a Firm Fixed Price purchase order under a Lowest Priced, Technically Acceptable evaluation method, with delivery due no later than seventeen weeks after award and F.O.B. Destination to Newport, RI. All submitted items must be new, sourced directly from the OEM or its authorized channels, and shipped from within the United States; gray market or refurbished products are strictly prohibited. Contractors must provide proof of U.S. origin and new product status, and failure to comply may result in termination for cause and liability for re-procurement costs. Each item must be uniquely identified with a UID if its acquisition cost is $5,000 or more, and payment will be processed electronically via WAWF. Submission must include SAM registration verification and comply with all incorporated FAR and DFARS clauses covering cybersecurity, labor standards, Buy American rules, export controls, and contractor obligations. Quotes are due by July 31, 2026, at 2:00 PM Eastern Time, and late submissions will not be considered. Any questions should be directed to Franklin Patton at the provided Navy email address.
Nuwc Division Newport

POSTED

2 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Health And Human Services → FDA Office Of Acq Grant Svcs

Same awarding agency

NAICS: 333243
New
Federal
Automated Slide Feeder MechanismThe contract is for the supply of an automated 4-slide feeder mechanism designed to enable reliable and precise loading and unloading of microscope slides into a scanning system, ensuring seamless integration with existing laboratory workflows. The mechanism must deliver high accuracy and consistent performance to support diagnostic and research applications within a high-throughput environment. This is a subcontract under the FDA Office of Acquisition and Grant Services, part of the Department of Health and Human Services, with the North American Industry Classification System code 333243 designating it specifically to other commercial equipment manufacturing. The solicitation was posted on July 24, 2026, with proposals due no later than August 7, 2026, at 4:00 PM. The place of performance is identified as Silver Spring, Maryland, with a ZIP code of 20993, indicating the equipment will be delivered and installed at a federal facility in this location. No set-aside status is designated, and the contract type is explicitly classified as a subcontract, meaning the offering entity is likely a supplier or manufacturer contracted by a prime contractor rather than directly by the government. The absence of a point of contact or detailed agency address means proposers must rely on the provided SAM.gov link for further instructions and documentation.
Sawmill, Woodworking, and Paper Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 532412
New
Federal
Lease and Maintenance of 1,500-Gallon Liquid Nitrogen Tank and VaporizerThe contract involves the lease, installation, maintenance, and emergency service of a 1,500-gallon liquid nitrogen storage tank and vaporizer system equipped with telemetry monitoring to ensure continuous operational integrity and safety. The scope encompasses full lifecycle support including setup, routine servicing, timely repairs, and 24/7 emergency response to prevent disruptions in critical applications requiring liquid nitrogen. The telemetry system enables real-time remote monitoring of tank levels, pressure, temperature, and system status to facilitate proactive maintenance and rapid intervention in case of anomalies or failures. This subcontract is issued under the FDA Office of Acquisition and Grant Services within the Department of Health and Human Services, with the NAICS code 532412 indicating equipment rental and leasing services. The solicitation was posted on July 24, 2026, and responses are due by July 31, 2026, at 5:00 PM. While no specific place of performance or point of contact is provided, the equipment will likely be deployed at a federal facility under FDA jurisdiction where consistent access to cryogenic materials is essential for research, storage, or medical operations. The requirement emphasizes reliability, compliance, and uninterrupted service to support high-stakes public health functions.
Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 541380
New
Federal
NSF/ANSI 49 Certification and Compliance VerificationThe contract requires comprehensive documentation and verification that all seven biosafety cabinets comply with NSF/ANSI 49 standards, necessitating third-party testing reports or coordination to confirm certification. This effort is critical to ensure the cabinets meet the rigorous safety and performance benchmarks established for biological safety equipment used in laboratory environments. The work must be completed and submitted by the response deadline of July 29, 2026, and is classified as a small business set-aside under SBA guidelines, limiting eligibility to total small businesses as defined by FAR 19.5. The North American Industry Classification System code 541380 indicates this effort falls under scientific testing and analysis services, aligning with the technical nature of the certification process. The place of performance is specified as Laurel, Maryland, with a zip code of 20708, indicating where the cabinets are located or where verification activities must be conducted. The contracting entity is the FDA Office of Acquisition and Grant Services under the Department of Health and Human Services, reflecting the federal regulatory and safety emphasis on biosafety infrastructure. Although no point of contact is listed, submission must be made through the SAM.gov portal linked in the contract details. Compliance is non-negotiable, and failure to provide verifiable third-party documentation will result in non-acceptance of deliverables, making timely and accurate certification coordination essential for contract fulfillment.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333293
New
Federal
Supply of Class II A2 Biosafety Cabinets (4-Foot Units)The contract calls for the procurement and delivery of six 4-foot Class II A2 biosafety cabinets, complete with all required accessories, designed to be transportable without disassembly and immediately ready for installation upon arrival. These units must meet stringent performance and safety standards appropriate for use in a laboratory or healthcare environment, ensuring containment and protection for personnel, products, and the environment during research or handling of biological agents. The cabinets are to be delivered to a designated location in Laurel, Maryland, with a zip code of 20708, and must be furnished in a manner that guarantees compliance with all technical and regulatory requirements without need for onsite modification or assembly. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, and it falls under NAICS code 333293 for other commercial and industrial machinery and equipment manufacturing. The opportunity was posted on July 24, 2026, with a response deadline of July 29, 2026, at 4:00 PM Eastern Time. The action is managed by the FDA Office of Acquisition and Grant Services under the Department of Health and Human Services, indicating the intended use is within a federal health and life science research context, and the delivery must align with federal acquisition standards regarding quality, documentation, and timely fulfillment.
Printing Machinery and Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details