Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

High-Speed Extremely Low Noise Visible Camera Supply

Active

International

Response Deadline08/21/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement and delivery of a complete high-speed, low-noise visible camera system encompassing all necessary hardware, firmware, software, and bilingual documentation to meet specified technical requirements. The system must deliver exceptional performance in high-speed imaging with minimal noise, suitable for advanced scientific or analytical applications, and all components must be fully integrated and supported by comprehensive user documentation in both official languages. The deliverables are expected to be fully functional, compliant with industry standards, and ready for immediate deployment upon receipt. This subcontract is issued by the National Research Council of Canada under the Government of Canada, with a North American Industry Classification System code of 334111, indicating classification within camera and photographic equipment manufacturing. The solicitation was posted on July 27, 2026, and responses are due by August 21, 2026. The place of performance is designated as Canada, requiring the contractor to deliver and support the system within the country, though no specific location or office address is provided. Potential bidders must ensure alignment with Canadian government procurement protocols and technical expectations outlined in the tender notice accessible via the provided link.

General Info

Procurement of integrated high-speed low-noise camera system with bilingual documentation for delivery in Canada.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

334111 - Electronic Computer ManufacturingView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 07:00:00 PM UTCin 22 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of a complete high-speed, low-noise visible camera system including hardware, firmware, software, and bilingual documentation.

Similar Contracts

Same NAICS industry code

Ruggedized 3U Server Integration and AssemblyThe contract involves the full integration, assembly, testing, and delivery of a custom 3U ruggedized server designed to meet stringent environmental, performance, and security requirements. The server must comply with FIPS 140-3 standards for cryptographic module security and include in-band diagnostics capabilities to ensure real-time operational monitoring and fault detection. The system is engineered for durability under harsh conditions, ensuring reliability in defense and aerospace environments where standard commercial hardware would fail. The solicitation is issued as a subcontract under the Naval Air Warfare Center, part of the Department of Defense, with a North American Industry Classification System code of 334111 for computer and peripheral equipment manufacturing. The response deadline is August 13, 2026, and the work is expected to be performed at an unspecified location within the United States. No specific set-aside information is provided, indicating the opportunity may be open to any qualified small or large business. The project requires a high level of technical expertise in rugged computing, security compliance, and systems integration to satisfy the mission-critical needs of the U.S. Navy.

Naval Air Warfare Center

POSTED

DEADLINE

Excalibur Rugged Server

Solicitation # N6893626RFPREQD550000E5500000379

The Naval Air Weapons Center Weapons Division at China Lake is conducting market research to identify potential sources for the procurement of a single Excalibur 3U XEON6 DP AC Rugged Server, as detailed in the Statement of Work. This notice is not a formal request for proposals but invites interested firms to submit written responses within 15 days of publication to be considered for future procurement actions. Submissions must reference solicitation number N68936-26-RFPREQ-D550000/E550000-0379 and include a comprehensive capability statement demonstrating relevant experience, assets, and the ability to meet performance requirements without compromising quality, accuracy, reliability, or schedule. All respondents must be registered in the System for Award Management and certified through the Defense Logistics Information Services to handle Controlled Unclassified Information or Export Controlled Information, with access limited to a single approved Data Custodian per CAGE code via the DD 2345 form. A Cyber Maturity Model Certification Level 1 is anticipated, and firms with concerns about this level are encouraged to provide a rationale and proposed alternative. All correspondence should be directed to the designated contracting office, with primary points of contact available for inquiry.

Naval Air Warfare Center

POSTED

DEADLINE

COMPUTER,PROGRAMMED

Solicitation # N0010426QJB95

This contract solicitation, issued by the Navy Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, seeks qualified contractors to repair the COMPUTER, PROGRAMMED under a firm-fixed-price arrangement. The required Repair Turnaround Time (RTAT) is 50 days, measured from the physical receipt of the F-condition asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. All repairs must comply with the original manufacturer’s specifications, drawings, and applicable military standards including MIL-STD-130 Rev N for marking. The contractor is responsible for all inspection and testing, with records retained for 365 days after final delivery, and must allow Government Source Inspection (GSI). Freight is FOB Origin with the Navy handling logistics per the CAV Statement of Work, and accelerated delivery is encouraged. The contract mandates strict adherence to Buy American and Federal Trade Agreement requirements, along with cybersecurity maturity model certification, small business subcontracting plans, and compliance with security prohibitions. Contractors must be authorized distributors of the original manufacturer and provide proof of authorization. Pricing must be justified, especially if the item is newly purchased by NAVSUP WSS or pricing exceeds historical levels, with submission of comparable invoices or explanations for cost differentials. A T&E fee may be negotiated if the asset is deemed beyond repair, capped at a specified amount. Failure to meet the 50-day RTAT results in a per-unit monthly price reduction, up to a maximum limit, without precluding the Government’s right to terminate for default. The contract also includes detailed clauses on design changes, packaging per MIL-STD-2073, document control, distribution statements, and access to technical manuals and standards. Responses are due by August 5, 2026, and the award will require bilateral acceptance by the contractor.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

6515-- BIOMED LAPTOPS

Solicitation # 36C26226Q1268

The Department of Veterans Affairs, through its VISN 22 Network Contracting Office, is issuing a Request for Information to gather market data on potential suppliers capable of providing Lenovo ThinkPad X1 2-in-1 Gen 10 laptops with Intel Core Ultra 7 processors, identified by the manufacturer’s part number 21NU0036US and local stock number 8279202. This RFI is strictly for planning and market research purposes and does not constitute a solicitation or obligate the government to award a contract. Responses are sought to assess the availability of qualified sources, particularly those classified as small businesses under NAICS code 334111 with a 1,250-employee size standard, and to evaluate their capacity to supply the specified devices or acceptable equivalents that meet all salient characteristics outlined. Respondents are required to provide detailed information including their business size status—such as SDVOSB, VOSB, HUBZone, or WOSB—and confirm whether they are manufacturers or distributors of the requested laptops or comparable solutions, along with the country of origin. Distributors must specify if they alter, assemble, or modify the products and describe any such changes. Companies must disclose if they hold existing federal contracts such as GSA FSS, NAC, or NASA SEWP, and confirm whether the referenced items are available under those contracts. General pricing for market research purposes must be submitted to assist in acquisition planning. All responses must be received via email to Anette.Doan@va.gov no later than August 11, 2026, at 12:00 p.m. Pacific Standard Time, and must clearly demonstrate compliance with the technical requirements. This RFI does not establish a bidder list or guarantee future solicitation, and any formal procurement will require a separate response to a subsequent solicitation announcement.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

6515--NURSING MONITORS PHYSIO CARDIAC

Solicitation # 36C26226Q1270

The Department of Veterans Affairs, VISN 22 Network Contracting Office, is issuing a Request for Information (RFI) to gather market awareness and capability data for supplies and services related to nursing monitors and cardiac physiologic equipment under NAICS code 334111, with a size standard of 1,250 employees. This RFI is strictly for planning and informational purposes and does not constitute a solicitation, offer, or binding contract. Respondents are encouraged to provide details on their business size status—such as SDVOSB, VOSB, HUBZone, WOSB, or large business—whether they qualify as small under the NAICS code, and whether they are manufacturers or distributors of the requested items, including the country of origin. The items listed include wall channels, Acer LED monitors, display mounts, video mirror senders and receivers, HDMI and USB cables, power supply brackets, and associated project management and labor services, with quantities ranging from one to twelve units per item. Interested parties must respond via email to Anette.Doan@va.gov no later than August 12, 2026, at 12:00 p.m. Pacific Standard Time, and must include pricing for market research, full capabilities demonstrating equivalence to specified items, and information on existing federal contracts such as GSA FSS, NAC, or NASA SEWP, including whether the requested products are available under those agreements. Responses must clearly show how offered products meet all salient characteristics of the listed items, with detailed evidence of equal or equivalent functionality. Responses will inform future acquisition decisions and do not guarantee a solicitation will be issued; any future solicitation will require a separate, formal submission. The place of performance is specified as San Diego, California, and the contract office is located in Gilbert, Arizona. No telephone responses will be accepted, and submission of information does not register respondents for future solicitations.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Apple Computer Hardware SupplyThe Florida School for the Deaf and the Blind is seeking to procure Apple-branded computing devices including MacBooks, iMacs, and Mac Minis for educational purposes under a subcontract arrangement. The solicitation was posted on July 28, 2026, with responses due by July 31, 2026, and falls under the NAICS code 334111 for computer and peripheral equipment manufacturing. The hardware is intended to support learning and accessibility needs within the school’s educational programs, ensuring students and staff have access to reliable, high-performance technology tailored to their requirements. Delivery is expected to occur at the school’s location in Florida, with no specific city or zip code provided in the details. The contract is open for bidding through the Florida Marketplace vendor portal, and while no set-aside designation or point of contact information is listed, the procurement is prioritized to fulfill the institution’s technological infrastructure needs for the academic environment.

Florida School for the Deaf and the Blind

POSTED

DEADLINE

Commercial Disk Drive SupplyThe contract is for the supply and delivery of 18 off-the-shelf disk drive units identified by NSN 7025015860337, each required to meet military packaging and marking standards. These units must be delivered to Tracy, CA, with a zip code of 95304-5000, ensuring compliance with Department of Defense specifications for handling, labeling, and environmental protection during transport and storage. The solicitation falls under NAICS code 334111, which pertains to computer and peripheral equipment manufacturing, and is categorized as a subcontract under the Department of Defense’s Construction & Equipment T & IFO EQ organization. The posting date is July 28, 2026, and responses are due by August 10, 2026, providing potential vendors a 13-day window to submit proposals. While no specific set-aside classification is indicated, the requirement is open to qualified suppliers capable of meeting military-grade standards without custom modification. All deliveries must adhere to the prescribed commercial off-the-shelf criteria while ensuring full compatibility with defense logistics and inventory systems. The contract’s administrative details are accessible via the DIBBS portal under solicitation number SPE8EN26T2727.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Computer Subassembly Supply and IntegrationThe contract entails the procurement and delivery of a military-spec computer subassembly identified by NSN 7021017193034, requiring full compliance with defense standards for packaging, labeling, and shipment. The subassembly must be integrated to meet exacting U.S. Navy operational requirements and delivered to a vessel stationed at FPO with ZIP 96678, indicating a forward-deployed or at-sea location. All components and documentation must adhere to strict military specifications to ensure compatibility, durability, and security in austere environments. The solicitation, issued under the NAICS code 334111 for computer and peripheral equipment manufacturing, is structured as a subcontract opportunity with a response deadline of August 10, 2026. The contracting activity falls under the Department of Defense, specifically the Construction & Equipment T & IFO EQ office, which manages critical equipment integration for naval platforms. While no set-aside designation is specified, suppliers must demonstrate proven capability in producing defense-grade electronics and managing secure, traceable logistics chains suitable for military deployment. The procurement is time-sensitive, with deliveries tied to vessel readiness and mission timelines.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Supplier of Computer Subassembly (NSN: 7050015385139)The contract calls for the supply of a computer subassembly identified by NSN 7050015385139, with full compliance to Department of Defense standards including unique item identification marking, rigorous testing protocols, and packaging that meets DLA specifications. The work must be performed to ensure the subassembly is fully functional, traceable, and protected for transport and long-term storage under military logistics requirements. All deliverables are expected to align with the industrial standards for electronic components within the defense supply chain. The solicitation is categorized as a subcontract under NAICS code 334111, targeting manufacturers capable of fulfilling precision electronic assembly needs for the Department of Defense. The place of performance is specified as Bremerton, Washington, with a response deadline of August 10, 2026. Although the solicitation number is not provided, the official portal for submission and further details is accessible through the DIBBS website. The contract is managed under the Construction & Equipment MRO Service I organization, indicating its relevance to maintenance, repair, and overhaul operations within military equipment systems.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Commercial Data Entry Keyboard SupplyThe contract seeks the supply of five commercial off-the-shelf data entry keyboards that must comply with all applicable federal standards for packaging, labeling, and hazardous materials handling. These keyboards are intended for use by the Department of Defense under the Construction & Equipment T & IFO EQ office, with delivery required to the specified place of performance in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation falls under NAICS code 334111, which classifies it within the computer and peripheral equipment manufacturing sector, and is issued as a subcontract under a broader procurement framework. Bids must be submitted by the response deadline of August 10, 2026, and the opportunity was posted on July 28, 2026, providing potential suppliers a minimum of two weeks to prepare and submit proposals. Only products that are commercially available and fully compliant with federal regulatory requirements will be considered; no custom or specialized modifications are permitted. The contract does not specify a set-aside classification, indicating it is open to general competition. All prospective vendors should review the official solicitation through the provided DIBBS link to ensure complete adherence to technical and administrative requirements prior to submission.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Binoculars Manufacturing and SupplyThe contract seeks the manufacture or sourcing of military-grade binoculars that meet stringent technical specifications for optical performance, durability, and environmental resilience, with specific requirements for the integration of coin alkaline batteries and secondary containment systems in alignment with NAVSEA standards. All delivered products must be fully compliant with military-grade operational demands, ensuring reliability under extreme conditions. The procurement is structured as a subcontract and is designated as a Women-Owned Small Business Set-Aside under NAICS code 334111, limiting eligibility to qualified WOSB entities. The place of performance is identified as New Cumberland, Pennsylvania, with a posted date of July 28, 2026, and a firm response deadline of August 10, 2026. The contracting activity is managed by the DDSP New Cumberland Facility under the Department of Defense, and the solicitation is accessible via the DIBBS platform under reference number SPE7L726T4479.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Commercial Off-The-Shelf (COTS) Data Entry Keyboard SupplyThe contract calls for the supply of one commercial off-the-shelf data entry keyboard with the National Stock Number 5999-01-678-3599, which must fully comply with military specifications. Delivery is required within 20 days of contract award, ensuring timely availability for operational use. The item falls under NAICS code 334111, classifying it as computer manufacturing, and is being procured under a subcontract arrangement by the Active Devices Division of the Department of Defense. The place of performance is specified as San Diego with ZIP code 92155-5993, indicating that the product will be delivered to a military facility in that location. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the contract is accessible via the DIBBS system under reference number SPE7M526T356J.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

ACAN - Low Noise Lock-in Amplifier with PID/PLL Controller, AM/FM Modulation, and Multi-frequency Capabilities

Solicitation # 26-58115

The National Research Council of Canada is seeking a high-performance Lock-in Amplifier with advanced capabilities to support precise signal detection in noisy experimental environments. The required instrument must be the Zurich Instruments AG Model VHFLI, operating up to 200 MHz, featuring high dynamic reserve, integrated PID/PLL feedback control, and multi-frequency acquisition tools including spectrum analysis, frequency sweeps, and data logging. The device must be fully compatible with existing experimental setups to ensure maximum accuracy and reliability in measurements. The solicitation, identified as 26-58115, was posted on July 29, 2026, with a response deadline of August 14, 2026, and is open to eligible suppliers under a federal procurement process. All proposals must demonstrate how the specified equipment meets performance criteria and integrates seamlessly into the NRC’s operational environment. The primary point of contact for inquiries is Karl Payong, Contracting Authority, reachable at karl.payong@nrc-cnrc.gc.ca. Performance of the contract is expected to take place in Ottawa, Canada.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Ocean Engineering Basin Camera Array

Solicitation # 26-58053

The National Research Council Canada is seeking a high-performance camera array system and associated equipment to support real-time model tracking in the Ocean Engineering Basin, with all deliverables required by March 12, 2027. Only Canadian suppliers or suppliers from applicable trading partners are eligible to respond, as the procurement is governed by the Policy on Reciprocal Procurement, and offers from non-trading partners will be rejected. The award will be made based on the lowest evaluated price among technically compliant offers, following a Lowest Price Technically Acceptable approach. To be considered compliant, bids must fully satisfy five mandatory technical criteria: inclusion of Sony FX3 cameras and a high-resolution camera body; compatibility with NRC’s software environment for remote control, synchronization, and HDMI/SDI transmission; provision of all required lenses, mounting hardware, and accessories; inclusion of all necessary video conversion, capture, cabling, and interconnection hardware; and a formal certification of compliance with all requirements. Proposals must be submitted as two separate electronic attachments—a Technical Offer and a Financial Offer—along with the Offer Submission Form and Offeror Declaration Form, all sent via email to the designated address with a total file size not exceeding 10 MB. Zip files, cloud links, and hard copies are prohibited. All submissions must be received by August 6, 2026, at 14:00 EDT. Delivery is required at 1 Arctic Avenue, St. John’s, Newfoundland, under DAP Incoterms® 2020, with the Government responsible for inspection and acceptance at that location. Contractors must comply with international sanctions, anti-forced labor regulations, and the Federal Contractors Program for Employment Equity, and must certify that no work involves forced labor or breaches Canadian tariff prohibitions. Invoices must be submitted electronically to nrc.invoice-facture.cnrc@nrc-cnrc.gc.ca and include the Client Reference Number and Business Number, with payments processed through the Receiver General for Canada via direct deposit, EDI, or wire transfer. No Contracting Officer’s Representative is named, and the Contracting Authority is Isabelle Fortin, who may negotiate terms post-submission. Environmental packaging standards require reusable, returnable, or recyclable materials per CAN/CSA-ISO 14021 and Canada’s Green Procurement Policy, excluding packaging tape. No specific NAICS code-based socioeconomic set-asides or UEI/CAGE registration is required, but offerors must complete the Integrity Declaration Form if any dis

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Large Slurry Mixer

Solicitation # 26-58093

The National Research Council of Canada is soliciting a large slurry mixer for use in its Clean Energy Innovation Research Center to support the development of viscous battery slurries for a prototyping line, with the goal of enhancing efficiency and operational versatility. This procurement, under solicitation number 26-58093, is governed by the Policy on Reciprocal Procurement, which restricts eligibility exclusively to Canadian suppliers and suppliers from applicable trading partners; offers from non-trading partner entities will be rejected. The contract requires the delivery of a single large slurry mixer meeting strict technical specifications, including a maximum footprint of 2000 kg, dimensions no greater than 3000 mm in depth and height and 2000 mm in width, and a stand-alone, floor-mounted design operable by a single person. The system must include a cooling/heating capacity of at least 5000 kCal/h (6 kW) at 10°C with automatic temperature control and real-time temperature display on a control panel. The full scope includes final design and drawings for NRC approval, successful Factory Acceptance Test (FAT), delivery of the complete mixer with all accessories and documentation, on-site installation, Site Acceptance Test (SAT) approval, and comprehensive operator training. All deliverables must be completed within 11 months of contract award, with key milestones set at two months for design approval, five months for FAT completion, and eight months for delivery. Payment is on a firm unit price, fixed-price basis, with no advance payments and invoices submitted only after each deliverable is completed. The contract includes a mandatory 12-month warranty or the contractor’s standard warranty, whichever is longer, and requires compliance with environmentally preferable packaging standards and the NRC’s Security Requirements Checklist. The contractor must comply with Canadian federal ethics standards, including the Conflict of Interest Act and the Values and Ethics Code for the Public Service, and is subject to audit and oversight under the Accounts and Audit provisions. Payment terms specify 30 days for undisputed invoices, with 15 percent withholding for non-resident contractors unless a valid waiver is provided by the Canada Revenue Agency. The mixer will be delivered under Incoterms® 2020 DAP to 75, de Mortgage Boulevard, Boucherville, QC, J4B 6Y4, with shipping accessible only via de Lauzon Street. Proposals must be submitted electronically in three distinct sections—Technical Offer, Financial Offer,

All Other Industrial Machinery Manufacturing

POSTED

DEADLINE

Bio-capacitance probe system

Solicitation # 26-58103

The National Research Council of Canada is soliciting a four-probe bio-capacitance measurement system designed for real-time monitoring of cell cultures in up to four bioreactors simultaneously. The system must enable continuous, multi-frequency scanning to capture the capacitance distribution spectrum of living cells, allowing for the real-time derivation of critical bioprocess parameters including viable cell concentration, cell size, internal conductivity, and critical frequency through analysis of β-dispersion using the Cole–Cole α model. The probes must be compatible with the variety of bioreactor types currently in use, ensuring seamless integration across existing infrastructure. The system must support dual communication protocols: OPC-UA for data exchange with control and data acquisition systems and 4–20 mA analog output to allow direct integration into closed-loop process control. This ensures that real-time bio-capacitance data can immediately inform and adjust bioreactor operations without reliance on external software or manual intervention. The procurement is open under solicitation number 26-58103 with responses due by August 24, 2026, and is managed by Daniel Rusthoven, Contracting Authority at the Government of Canada.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

PDF and Web-Based Output Publishing EngineThe contract seeks the configuration of automated publishing pipelines using DITA-OT to produce accessible PDF and web-based outputs from DITA source content, ensuring consistent formatting across all deliverables. The work involves developing and refining processes that transform structured documentation into compliant, user-friendly formats suitable for government accessibility standards, with emphasis on usability, readability, and adherence to WCAG guidelines. The solution must support scalable, repeatable publishing workflows that reduce manual effort and maintain uniformity regardless of output medium. This subcontract is issued by the National Research Council of Canada under the Government of Canada and is tied to a NAICS code of 511120, indicating software publishing activities. Performance is expected to occur in Ottawa, with a response deadline of August 12, 2026, and the opportunity posted on July 28, 2026. The project does not specify a set-aside type, and while no point of contact is listed, interested parties must respond via the official Canada Buys portal. The focus is on delivering robust, automated publishing infrastructure capable of handling complex documentation environments while ensuring accessibility and visual consistency.

Periodical Publishers

POSTED

DEADLINE

Technical Training and Knowledge Transfer for NRC AuthorsThe National Research Council of Canada is seeking a subcontractor to deliver bilingual training programs tailored for technical authors, focusing on core documentation technologies including CCMS, DITA, Oxygen XML, and conditional publishing workflows. The training must be conducted in both English and French to support the Council’s multilingual operational environment, ensuring all participants gain practical proficiency in managing structured content and implementing advanced publishing techniques. The program is designed to transfer institutional knowledge and build sustainable in-house expertise among technicalwriting teams. This subcontract opportunity is posted under NAICS code 611430 and requires proposals to be submitted by August 12, 2026, with performance expected to take place in Ottawa. The contract does not specify a set-aside status or detailed point of contact, and the place of performance is limited to Ottawa, though delivery may involve virtual or in-person components. Bidders are expected to demonstrate proven experience in technical training development, content management system instruction, and bilingual education delivery within government or highly regulated environments. All training materials and instruction must align with the NRC’s documentation standards and support long-term adoption of modern authoring practices.

Professional and Management Development Training

POSTED

DEADLINE

Azure Cloud Deployment and System AdministrationThe contract entails the full installation, configuration, and continuous administration of a CCMS system within a customer-managed Azure cloud environment, with an emphasis on achieving high availability and rigorous security hardening to meet federal standards. The scope requires expertise in Azure infrastructure management, including resource provisioning, network isolation, identity and access control, monitoring, and disaster recovery planning, all aligned with the customer’s operational and compliance requirements. This is a subcontract under the National Research Council of Canada, a government of Canada entity, with performance based in Ottawa. The solicitation was posted on July 28, 2026, and responses are due by August 12, 2026, with the NAICS code 541511 indicating it falls under custom computer programming services. The work must be executed in a secure, government-regulated cloud setting, demanding proven experience with federal compliance frameworks and the ability to maintain system integrity and uptime without direct oversight of the underlying cloud infrastructure.

Custom Computer Programming Services

POSTED

DEADLINE

Conditional Content and Metadata Management ModuleThe contract is for the development of a Conditional Content and Metadata Management Module to support jurisdiction- and user-specific content variants by implementing metadata tagging and conditional publishing capabilities at the Map, Topic, and sub-topic levels. This work will enable dynamic content delivery based on predefined criteria, allowing authorized users or regions to access tailored information while maintaining a unified content repository. The module will require robust infrastructure to manage metadata hierarchies, apply conditional logic during content publication, and ensure consistency across varied access scenarios. The solicitation is issued as a subcontract under the National Research Council of Canada, part of the Government of Canada, with a NAICS code of 541511 indicating software development and custom programming services. The opportunity was posted on July 28, 2026, with a response deadline of August 12, 2026, and performance is expected to be carried out in Ottawa. The project is not subject to any specific set-aside classification, and interested parties must submit proposals through the Canada Buys portal before the deadline to be considered for award.

Custom Computer Programming Services

POSTED

DEADLINE

API-Driven Workflow Automation for Technical ContentThe contract targets the design and implementation of automated workflows compliant with BPMN standards for Proposed Change Forms, encompassing dynamic approval routing, real-time notifications, and comprehensive audit logging to ensure transparency and accountability. The solution must be API-driven, enabling seamless integration with existing systems and supporting end-to-end automation of technical content workflows without manual intervention. Performance is expected to be delivered in Ottawa, with all system components rigorously tested for reliability, scalability, and alignment with government-grade security protocols. This subcontract is issued by the National Research Council of Canada under the Government of Canada, classified under NAICS code 541512 for custom computer programming services. The solicitation was posted on July 28, 2026, with responses due by August 12, 2026, and operates under an open competition format with no specific set-aside criteria. The emphasis is on proven expertise in workflow automation, robust system architecture, and the ability to deliver a fully functional, auditable solution within the stipulated timeline, with no indication of pre-qualified vendors or restrictions beyond the standard federal procurement framework.

Computer Systems Design Services

POSTED

DEADLINE

DITA 1.3-Compliant Component Content Management System (CCMS) ImplementationThe contract involves the deployment and configuration of a DITA 1.3-compliant Component Content Management System (CCMS) integrated with Oxygen XML Editor to manage the Canadian National Model Construction Codes. The solution must support robust version control and conditional publishing capabilities to enable dynamic content delivery based on user needs, jurisdictional requirements, and regulatory contexts. The system will be designed to ensure consistent, accurate, and efficient authoring, updating, and distribution of complex technical code content across multiple stakeholders and regions within Canada. The project is structured as a subcontract under the National Research Council of Canada, part of the Government of Canada, with a response deadline of August 12, 2026, and a posted date of July 28, 2026. The place of performance is Ottawa, and the NAICS code 511210 identifies the work as software publishing, emphasizing that the deliverable is a purpose-built content management application rather than off-the-shelf software. The implementation must fully adhere to DITA 1.3 standards to ensure interoperability, scalability, and future-proofing of the content architecture, with a focus on enabling maintainable, reusable, and modular code documentation tailored to the evolving needs of Canadian construction regulation.

Software Publishers

POSTED

DEADLINE

CNC Tool Room Lathe

Solicitation # 26-58071

The National Research Council Canada is soliciting a CNC tool room lathe with full manual machining capabilities to support precision, flexibility, and rapid setup in its Design and Fabrication Service. The procurement is governed by the Policy on Reciprocal Procurement, restricting eligibility to Canadian suppliers and those from designated trading partners; submissions from non-trading partners will be rejected. All deliverables—including the lathe, on-site installation, and training—must be completed and received no later than December 31, 2026, with delivery occurring at 655 Levy Private, Building U-66, Ottawa, ON K1V 2B1 under Incoterms® 2020 DAP terms. The equipment must meet strict technical requirements, including a Siemens CNC control system, ±0.0002” positioning accuracy, hardened machine ways rated at 50 HRC, C3-grade ball screws, and compliance with CSA, cUL, and Canadian Electrical Code Part 1 standards. Offers are evaluated using a Lowest Price Technically Acceptable approach, where all ten mandatory technical criteria must be met without exception; failure to satisfy any one renders a bid non-compliant regardless of price. Only electronically submitted proposals via email to NRC.BidReceiving-ReceptiondesSoumissions.CNRC@nrc-cnrc.gc.ca are accepted, limited to 10 MB total size in uncompressed PDF or Word format, with a submission deadline of August 14, 2026. The offering must include a completed Offeror Declaration Form verifying compliance with anti-forced labor requirements and reciprocal procurement rules, with additional Integrity Declaration Forms required if any certification cannot be fully affirmed. Packaging must adhere to the Green Procurement Policy and Ocean Plastics Charter, using only reusable, returnable, or recyclable materials unless technically unjustifiable. Invoices must be sent electronically to nrc.invoice-facture.cnrc@nrc-cnrc.gc.ca with proper financial codes and Business Numbers, and payment is processed via direct deposit, EDI, or wire transfer. Access to PROTECTED and classified information may be required during delivery or commissioning, necessitating that personnel hold at least RELIABILITY STATUS clearance or higher. The Contracting Authority, Isabelle Fortin, retains full authority over acceptance, negotiation, and contract administration, with no designated COTR or contractor representative named. All materials must be new and conform to specifications in effect at the time of offer submission.

Machine Tool Manufacturing

POSTED

DEADLINE

Fiber Laser Cutter for Aluminum and Copper

Solicitation # 26-58021

The National Research Council Canada is soliciting offers for a high-precision, enclosed fiber-laser cutting system designed to reliably cut aluminum and copper for battery prototype components. The solicitation, numbered 26-58021, is open only to Canadian suppliers under the Policy on Reciprocal Procurement and is governed by multiple free trade agreements including CFTA, CCFTA, and CKFTA. Proposals must be submitted electronically by July 27, 2026, at 14:00 EDT, in three distinct attachments: a Technical Offer, a Financial Offer, and a Forms package containing the Offer Submission Form and Offeror Declaration Form. The system must feature a fiber laser with at least 3000W power, a 10:1 operational turn-down ratio, a work area between 400x300mm and 635x635mm, a Z-axis of minimum 50mm, and positioning precision of 0.1mm or better. It must cut 4.064mm aluminum and 3.175mm copper at speeds of at least 1m/min, include auto-tracking laser head, fully enclosed operation, integrated gas assist with oxygen, nitrogen, and air, and an active protection system for back-reflected laser energy. Submission of non-compliant files, compressed archives, or physical media will result in disqualification, and financial data must not appear in the technical offer under penalty of rejection. The contract requires delivery, installation, commissioning, and training, with all shipments destined for NRC Building U91, 2320 Lester Road, Ottawa, under Delivery at Place (Vancouver, BC) Incoterms® 2020. The vendor must include all shipping, customs, and duty costs in the proposal. Packaging must adhere to environmentally preferable standards, using only reusable, returnable, or recyclable materials, with packaging tape excluded due to market limitations. Sample cuts must be provided within 15 business days after receiving materials, accompanied by a detailed cutting report. The offering must include a minimum two-year warranty. Evaluation is based on the lowest priced compliant offer, with mandatory technical criteria and sample cut performance as non-negotiable pass/fail gates. Invoices must be submitted via email to nrc.invoice-facture.cnrc@nrc-cnrc.gc.ca, include the contract number, and exclude taxes, which must be listed separately with proper registration numbers.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE