This Pre-Solicitation opportunity from Department Of Defense was posted on November 2, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

High Temperature Blackbody

Closed

FA2263-21-Q-0001Federal

Submission Closed11/17/2020, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

Federal

Off-Axis Parabolic Mirrors

Solicitation # FA860127Q0003

The Air Force Life Cycle Management Center, on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify qualified sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are intended for use in the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a 30mm diameter fused-silica substrate with a parabolic focus at 45 degrees, a surface roughness of less than 1nm RMS, and a scratch/dig specification of 20-10. The required protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance, and transportation to Wright-Patterson Air Force Base, Ohio. Key deliverables include the mirrors and comprehensive test data, including certificates of conformance and surface-measurement data. Delivery is required within 98 calendar days after receipt of order, and the equipment must be warranted against defects for two years following receipt. Payment terms are set at 100 percent after delivery, net 30 days from the invoice date. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026.

POSTED

DEADLINE

Flight Model Solar Array Wings

Solicitation # 80NSSC27946791Q

National Aeronautics And Space Administration

POSTED

DEADLINE

ICP-OES for Oil Analysis

Solicitation # W911S227U0057

POSTED

DEADLINE

Laboratory Equipment, Microscope & Accessories (Supply and Install) (Echo Revolve)

Solicitation # 40-27

Solicitation 40-27, issued by the New Hampshire Department of Administrative Services, seeks bids for the supply, delivery, and turn-key installation of an Echo Revolve R4 Upright Microscope and associated accessories for the NH Department of Fish and Game in Concord, New Hampshire. The required equipment is a hybrid fluorescence microscope capable of flipping between upright and inverted modes, featuring a 12.9-inch iPad Pro Retina display. Key deliverables include the microscope system, specific LED light cubes, various objective lenses, an ELWD universal condenser, stage inserts, and a digital haze reduction software module. The successful vendor must complete delivery and installation within 45 business days of the contract award. The contract will be awarded to the responsible vendor who submits a conforming bid meeting all technical specifications at the lowest total cost. Bids are due by October 23, 2026, and must be submitted via email to the Bureau of Purchase and Property. Vendors are required to provide proof of comprehensive general liability insurance of at least 1 million dollars per occurrence and 2 million dollars aggregate, as well as workers compensation insurance. Environmental guidelines encourage the elimination of PVC and polystyrene and the use of SmartWay transport partners. Payment terms are set at 30 days following the receipt of an itemized invoice after the equipment has been delivered, inspected, and accepted by the agency.

Das Purchasing (statewide Bids & Contracts)

POSTED

DEADLINE

MFO Teledyne Items G. Curvin 10/19/26

Solicitation # SRC0000037208

Solicitation SRC0000037208 is issued by the Alabama Environmental Management agency for the procurement of a Teledyne API Model N100 SO2 Analyzer. The device must utilize the UV fluorescence principle and adhere to the US EPA Automated Equivalent Method EQSA-0495-100, featuring a lower detectable limit of 0.4 ppb or less and a response time of less than 120 seconds to 95%. Required accessories include a long-life sample filter holder assembly and two rack mount kits. The contract is capped at a total value of 25,000 dollars and may be renewed annually for up to five years. The State of Alabama will evaluate bids based on price reasonableness, cost realism, and supplier qualifications, which may include requests for professional licenses, insurance certificates, and manufacturer reseller authorizations. Suppliers must be registered in Alabama Buys and submit responses electronically. Key compliance requirements include E-Verify enrollment for Alabama-based employees, certification of no boycott activities, and adherence to Alabama state and local tax regulations. Payment is handled electronically via P-cards, EFT, or state-issued credit cards, with price escalations limited to 5 percent of the annual contract cost. The State retains the right to inspect all products after delivery before final acceptance.

ENVIRONMENTAL MANAGEMENT

POSTED

DEADLINE

Supply of Special Scale Meters (NSN 6625-01-541-0598)This subcontract involves the procurement of two Special Scale Meters under NSN 6625-01-541-0598 to support prime contractors for the DLA Weapons Support Maritime Supply Chain. The selected provider is responsible for sourcing or manufacturing the meters and ensuring all units adhere to strict military specifications. This includes marking according to MIL-STD-129 and packaging in compliance with RP001 and MIL-STD-2073-1E. Additionally, the contractor must provide hazard warning labels as required by 29 CFR 1910.1200 and DFARS 252.223-7001 where applicable. The contract falls under NAICS code 334516 and requires delivery of the units FOB Origin to DLA Distribution DDSP in New Cumberland. Interested parties must submit their responses by October 30, 2026. This effort is managed through the Department of Defense to ensure the continued operational readiness of maritime supply chain weapons support.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Dräger Carbon Dioxide Measuring TubesThis subcontract involves the manufacture and supply of specialized round glass measuring tubes with melted tips for prime contractors supporting Department of Defense DLA supply contracts. The tubes must be produced according to Dräger Carbon Dioxide 100/A-P specifications, featuring a measuring range of 100 to 3000 ppm for 1 liter of air. The final delivery consists of two packages of gas analyzer measuring tubes. Compliance is required with ASTM D3951 packaging and Medical Marking Standard No. 1. The contractor must ensure that all items are delivered within three months of manufacture. This requirement is managed under NAICS code 334516 for the Medical Supply Chain FSH agency, with the place of performance located at FPO 96692-1100.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Gas Analyzer Supplier (NSN 6630016713921)This subcontract involves the supply of two specialized gas analyzer units for prime contractors supporting Department of Defense medical equipment procurements through the Medical Supply Chain FSH. The equipment must adhere to NSN 6630016713921 specifications, featuring an internal pump, a digital LCD display, and a selectable carrier gas option for either oxygen or air. These units are specifically required to measure vaporizer output concentrations for Halothane, Isoflurane, Sevoflurane, and Desflurane. The procurement falls under NAICS code 334516 and is managed by the Department of Defense. The place of performance is designated as APO 96260-5479. Interested parties must note the response deadline of October 26, 2026, following the posting date of October 19, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

MEASURING TUBE, GAS ANA

Solicitation # SPE2DH-27-T-0214

Solicitation SPE2DH-27-T-0214 is a procurement by the Defense Logistics Agency for the supply of gas analyzer measuring tubes, specifically the Draeger Carbon Dioxide 100/A-P. These round glass tubes with melted tips are designed to measure carbon dioxide content in compressed gases with a range of 100 to 3000 parts per million per liter of air. The requirement consists of three line items, each for one package containing 10 tubes. Delivery is required within 20 days after the order, with shipments destined for the USS Carl M. Levin, USS William P Lawrence, and USS Thomas Hudner. The contract mandates a non-extendable shelf life of 24 months, with a requirement that no more than 3 months elapse between the date of manufacture and delivery to the government. Packaging must adhere to ASTM D3951 and DLA packaging requirements, while marking must comply with Medical Marking Standard No. 1. Invoicing and payment are processed electronically through the Wide Area WorkFlow system. The procurement is governed by NAICS code 334516 and includes various FAR and DFARS clauses regarding equal opportunity, combatting trafficking in persons, and the Buy American Act. Destination inspection is required per FAR 52.246-2.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0262

Solicitation SPE8E5-27-T-0262 is a fixed-price procurement issued by the Defense Logistics Agency Troop Support for one Grip Spacing Gage, identified by NSN 5220001823779 and part number T101559 from Rotair Aerospace Corp or Bell Textron Inc. The required delivery date is October 20, 2026, with a delivery window of five days after the order. Shipping is FOB Origin and will be delivered to the USA DEP Corpus Christi in Texas. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and MIL-STD-130N, with DLA Master List requirements taking precedence. Palletization must comply with RP001. Invoicing and payment processing are required through the Wide Area WorkFlow system. This procurement is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity requirements for safeguarding covered defense information, and specific representations regarding small business size standards under NAICS code 334516.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE2DH-27-T-0217

Solicitation SPE2DH-27-T-0217 is a request for quotations from the Department of Defense, specifically the Medical Supply Chain FSH, for the procurement of two gas analyzers under NSN 6630-01-671-3921. The required devices must feature an internal pump, a digital LCD display, and the ability for users to select between O2 or air as the carrier gas. These analyzers are designed to measure the concentration percentage of Desflurane, Sevoflurane, Isoflurane, and Halothane. Each unit must be delivered with a sampling tube, a carrying case, and a T-shaped sampling piece. Bidders are required to specify the source and part number being supplied and must provide a complete data package if proposing an alternate part. The contract specifies a delivery period of 88 days with a required delivery date of October 19, 2026, shipped FOB Destination to the USA Medical Materiel Center in Korea. Compliance with Medical Marking Standard No. 1 and MIL-STD-2073-1E for packaging is mandatory, with each unit required to be in a sealed container. The acquisition falls under NAICS code 334516 and incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination point in accordance with FAR 52.246-2.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Portable Non-Nuclear Density Gauge

Texas Department of Transportation

POSTED

1 day ago

DEADLINE

in 13 days

General Info

Agency

Department Of Defense → FA2263 Aflcmc Romk Afmetcal

Contract Value

$71,400

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Set-Aside

NONE

Awardee

LUMASENSE TECHNOLOGIES, INC

Award Issued Date

05/19/2021, 12:00:00 AM UTC

Documents

JA_Rev1_20E-153A-IN+High+Temperature+Blackbody+signed.pdf

PD_Rev3_20E-153A-IN+-+AFPSL-High_Temperature_Blackbody.doc

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedNov 2

Presolicitation

Response DeadlineNov 17

Deadline has passed

Submission Closed

11/17/2020, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA2263 Aflcmc Romk Afmetcal

Contacts2 people available

OfficeHEATH, OH, 43056-6116, USA

Organization / AgencyDepartment Of Defense → FA2263 Aflcmc Romk Afmetcal

Office AddressHEATH, OH, 43056-6116, USA

Contacts

Michael Hickey

Amy Poling

Full Description

The Air Force Metrology and Calibration program (AFMETCAL) at Heath OH intends to solicit and award a Sole Source Firm Fixed Price contract under Simplified Acquisition Procedures (SAP) in accordance with FAR Part 13-Simplified Acquisition Procedures and FAR Part 12-Acquisition of Commercial Items for the purchase of a High Temperature Blackbody to Advanced Energy Industries, Inc. Market research was done and no other manufacturers make a High Temperature Blackbody that can meet the Air Force requirement. Other identified manufacturers make blackbodies, however, they do not comply with the high temperature range requirements. Therefore, based on market research conducted, Advanced Energy, Inc. is the only manufacturer that can supply the unit. The Government envisions a Firm Fixed Price type contract. The anticipated quantity is for 1 unit in FY21. The requirement is for a High Temperature Blackbody in accordance with the Purchase Description, which are available for download at this site. The pre-solicitation number is FA2263-21-Q-0001 and shall be referenced on all correspondence submitted. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS OR QUOTATIONS. No solicitation package will be issued. A determination by the Government not to compete this action based on responses received is solely within the discretion of the Government. All responsible sources may submit a capability statement, proposal, or quotation which shall be considered by AFMETCAL. Interested sources must respond in writing with clear and convincing evidence to support their ability to provide the required item within fifteen (15) days of this publication. Interested parties should submit questions to Michael Hickey by email at michael.hickey.2@us.af.mil .