This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on September 3, 2013. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

High Temperature Cabinet Oven

Closed

F3T2CM3199AN01Federal

Submission Closed09/05/2013, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333994

New

Federal

Modular Test Furnace with Auxiliary Exhaust Burner AssemblyThe Department of Energy, specifically the Office of Fossil Energy, has issued a forecast for the procurement of a Modular Test Furnace with Auxiliary Exhaust Burner Assembly. This project is categorized under NAICS code 333994 and is designated as a small business set-aside. The performance of this contract will take place in Ohio. Interested parties may coordinate with Brian Halstead, the Small Business Program Manager, regarding this acquisition opportunity.

Office of Fossil Energy

POSTED

DEADLINE

IRA Purchase of Carbolite-Gero (Verder Scientific, Inc.) Horizontal High Temperature Tube Furnace up to 1800 °C per the attached specifications: 1. Horizontal High Temperature Tube Furnace up to 1800…The Department of Energy's Office of Fossil Energy is forecasting the purchase of four Carbolite-Gero Horizontal High Temperature Tube Furnaces capable of reaching 1800 degrees Celsius. This acquisition includes several critical enhancements for each unit, such as CC-T1 upgrades from 3016P1, heat shields with flange supports, custom Gero modifications, and CSA inspections. Additionally, the order specifies 13-meter cables for each furnace and covers the associated freight costs. The procurement is categorized under NAICS code 333994 and is slated for performance in Pennsylvania. While the solicitation number is not yet available, the forecast was posted on October 18, 2026. Brian Halstead serves as the Small Business Program Manager and primary point of contact for this requirement.

Office of Fossil Energy

POSTED

DEADLINE

Purchase of Walk-in Ovens

Solicitation # F2027038

Tarrant County is soliciting bids for the replacement of three commercial ovens at the Lon Evans Corrections Center under solicitation number F2027038. The project requires the awarded vendor to provide all labor and materials for the uninstallation and removal of existing equipment and the installation of three new double rack rotating ovens. To be eligible for award, bidders must bid on all items and meet strict technical specifications, including the use of a 275k BTU gas system, a Type I hood with UL 710 listed grease filters, compliance with NFPA-96 requirements, and the inclusion of a prison security package. The contract will be awarded to the lowest bidder meeting these specifications. Bidders must submit detailed product specifications, warranty information, and electrical and gas system requirements, ensuring all delivery, labor, travel, and freight costs are included in the installation pricing. The response deadline is November 30, 2026. Tarrant County adheres to a HUB policy for disadvantaged business enterprises and requires that bidders do not owe delinquent property taxes within the county. Payment is typically issued within thirty days of receiving the invoice or items, and the county maintains audit rights for twelve months following final payment. Additionally, vendors must comply with data security standards and may be subject to criminal background checks for personnel accessing secure facilities.

POSTED

DEADLINE

OVEN ASSEMBLY, SINGLE

Solicitation # SPE3SE-27-Q-0036

Solicitation SPE3SE-27-Q-0036 is a request for quotations issued by the DLA Troop Support Subsistence FSE Supply Chain for the procurement of one single oven assembly, identified by NSN 7310-01-486-4360. The requirement is a firm fixed price contract with a delivery schedule of 30 days after receipt of order. Delivery, inspection, and acceptance are all set for the destination point at the Letterkenny Army Depot in Chambersburg, Pennsylvania. The assembly must be manufactured in accordance with Technical Data Package Rev A Gen 1 and a series of specific reference drawings dated between July 11 and July 14, 2014. The contractor must adhere to strict packaging and marking standards, utilizing ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List of Technical and Quality Requirements and RP001 palletization standards take precedence. Invoicing must be processed electronically via the Wide Area Workflow system, with proof of delivery submitted to the DLA FSE Post Award office. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, cyber incident reporting, and the prohibition of certain foreign telecommunications equipment. Offerors must be registered in the System for Award Management and provide necessary CAGE and UEI identifiers.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

CARTRIDGE, DEHYDRATOR

Solicitation # SPE8E8-27-T-0203

Solicitation SPE8E8-27-T-0203 is a request for the procurement of 21 dehydrator cartridges, identified by NSN 4440-01-582-6344 and part number 657-400-001 from Compass Instruments Inc. The items are designated as Type 2 Code 9 with an extendable shelf life of 60 months. Delivery is required within 29 days of award, with a need ship date of November 25, 2026, and a final required delivery date of November 30, 2026. The shipment is FOB Origin and will be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging, RP001 for palletization, and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, including specific provisions for source approval requests and the removal of government identification from non-accepted supplies. All quotes must be submitted via the DIBBS portal by October 26, 2026. The award process may be automated, and the government will not evaluate offers utilizing additive manufacturing. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and various FAR/DFARS clauses regarding cybersecurity, human trafficking, and telecommunications equipment. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE4A8-27-Q-0003

Solicitation SPE4A8-27-Q-0003 is a request for a firm-fixed-price contract issued by the Defense Logistics Agency Weapons Support for the upgrade of a medium Thermal Equipment Corporation composite autoclave system located at Fleet Readiness Center East in MCAS Cherry Point, North Carolina. The scope of work includes the replacement of the combustible heating system, vacuum receivers, vacuum control valves, and the Motor Control Center. Additionally, the contractor must replace the hoist scissor-lift bridge system and locking mechanisms, provide a new self-contained Hydraulic Power Unit, and upgrade the Human-Machine Interface to a Windows 11 computer with a color inkjet printer. The project requires the delivery of a Plan of Action and Milestones within 30 days of award, an Acceptance Test Plan, and comprehensive technical manuals. The performance period for the upgrade, installation, and associated deliverables is 365 days after receipt of order, with inspection and acceptance occurring at the destination. Offerors are evaluated based on technical acceptability, past performance from the last five years, and price reasonableness. Technical submissions must include a compliance statement using Exceeds, Comply, or Exception To designations, along with descriptive literature and price support. The contractor is responsible for all rigging, installation, and adherence to strict safety standards, including OSHA, EM 385-1-1, and specific Naval Ordnance Safety and Security Activity requirements for lightning protection systems. All identification marking must comply with MIL-STD-130N, and the resulting PLC ladder logic program will become the property of the government.

Defense Logistics Agency

POSTED

DEADLINE

Vacuum Induction Melting Furnace - Cooler

Solicitation # 2627-030

The Saskatchewan Research Council is seeking quotations for the supply of two complete closed loop cooling water packages for a Vacuum Induction Melting furnace. These systems will be utilized within the REE Commercial Division in Saskatoon, Saskatchewan, to remove heat generated during the induction melting process and ensure safe, reliable operation by maintaining specific inlet water conditions. This solicitation, identified by number 2627-030, was posted on October 6, 2026, with a response deadline of October 21, 2026. Interested parties can coordinate with the primary point of contact, Roger Dauvin, regarding the requirements for this project located in Saskatchewan.

Saskatchewan Research Council

POSTED

DEADLINE

Animal Care Services (ACS) Crematorium Replacement

Solicitation # 2001045440

The City of San Antonio is soliciting bids for the Animal Care Services Crematorium Replacement under solicitation number 2001045440. This turnkey project requires the fabrication, purchase, delivery, installation, startup, and staff training for one commercial grade cremation unit designed for animal remains at a large municipal shelter. The scope of work encompasses all necessary equipment, materials, permits, testing, commissioning, and labor. A critical component of the project is the removal and proper disposal of an existing incinerator located in an outdoor covered area, which necessitates obtaining FAA approval for crane usage. The project will be performed at the Animal Care Services facility located at 4710 State Highway 151, San Antonio, Texas. Bids are due by November 3, 2026, at 2:00 p.m. Interested parties should note that a pre-bid conference was scheduled for October 12, 2026, followed by a site visit on October 13, 2026. The solicitation is categorized under NAICS code 333994 and involves industrial incinerator standards and maintenance services.

POSTED

DEADLINE

High-Pressure Ratio Compressor Design and PrototypingThe NASA SBIR/STTR Program is seeking a subcontractor for the mechanical and systems engineering design of a specialized compressor intended for supercritical gases in space environments. The technical requirements focus on developing a compact system capable of achieving a high compression ratio of 100:1 and operating at pressures up to 3,000 psia. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, restricting eligibility to firms with fewer than 500 employees. The project falls under NAICS code 333994 and is slated for performance in Cleveland, Ohio.

NASA SBIR/STTR Program

POSTED

DEADLINE

Microgravity Slurry Mixing and Pumping System Design & FabricationThis subcontract through the NASA SBIR/STTR Program focuses on the design, prototyping, and fabrication of a flight-ready slurry mixing and pumping system. The system is intended for integration into a carbon formation reactor and must be engineered for reliable operation within microgravity environments. The project is designated as a Total Small Business Set-Aside for firms with fewer than 500 employees, falling under NAICS code 333994. Performance of the contract is centered in Huntsville, Alabama, and is managed under the agency's specialized small business innovation research framework.

NASA SBIR/STTR Program

POSTED

DEADLINE

Reciprocating Compressor SupplyThis subcontract with the Defense Logistics Agency under the Department of Defense involves the supply of military-grade reciprocating compressors. The items are to be provided as physical deliveries under specific Contract Line Item Numbers and must strictly adhere to DLA standards for packaging, marking, and invoicing. The contract is categorized under NAICS code 333994 and was posted on August 17, 2026. All deliverables must meet the rigorous technical and logistical requirements set forth by the agency to ensure compliance with military procurement standards.

Defense Logistics Agency

POSTED

DEADLINE

Industrial Chain Hoist Supply and DeliveryThis subcontract with the Defense Logistics Agency under the Department of Defense involves the supply and delivery of one heavy-duty chain hoist, identified by NSN 3950011985598. The equipment must strictly adhere to military specifications, with all packaging, labeling, and preservation processes conducted in accordance with established MIL standards. The contract falls under NAICS code 333994 and was posted on August 17, 2026. All deliverables must meet the rigorous quality and technical requirements mandated by the agency to ensure operational readiness and compliance with defense procurement standards.

Defense Logistics Agency

POSTED

2 months ago

DEADLINE

N/A

General Info

Agency

Department Of Defense → FA4809 4TH Cons Squadron Cc

NAICS

333994 - Industrial Process Furnace and Oven Manufacturing

Place of Performance

200 Propulsion Road, SJAFB, NC, 27531, USA

Set-Aside

SBA

Documents

Q%26As.docx

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates

PhaseClosed

PostedAug 21

Combined Synopsis

Notice updatedAug 29

Response deadline changed from Aug 30, 2013 to Sep 5, 2013. The notice description changed.

Notice updatedSep 3

The notice description changed.

Response DeadlineSep 5

Deadline has passed

Submission Closed

09/05/2013, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA4809 4TH Cons Squadron Cc

Contacts2 people available

OfficeSEYMOUR JOHNSON AFB, NC, 27531-2456, USA

Organization / AgencyDepartment Of Defense → FA4809 4TH Cons Squadron Cc

Office AddressSEYMOUR JOHNSON AFB, NC, 27531-2456, USA

Contacts

Devin R. Powner

contact@example.gov

+1 (555) 000-0000

Brett EtterContracting Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with FAR Subpart 12.6 and FAR FAC 2005-68. This announcement constitutes the only solicitation, and is issued as a Request for Quotation. A WRITTEN SOLICITATION WILL NOT BE ISSUED. This is a 100% Small Business set-aside. This is a firm-fixed price procurement and will be procured using commercial procedures. Solicitation Number is F3T2CM3199AN01. The NAICS code 333994 applies to this solicitation. The size standard is 500 Employees. The item description is as follows: CLIN 0001: Gas fired, high temperature cabinet oven. - Must be able to reach 1250F (677C) - Must have full horizontal air flow - 460/60/3 electrical service - Workspace dimensions: 50"W x 50"D x 50"H - Programmable termperature controller and audible "end-of-cycle" alarm - Heat input: 700,000 BTU/hour - Two stainless steel shelves (200lbs distributed load per shelf, 800lbs total oven shelf loading) - 20' of 6" diameter stainless steel double wall vent pipe, with one 6" diameter 90 degree elbow - On-site installation and start-up, as well as freight, must be included in this quote Manufacturer information for reference: Grieve Model HC-1250 or "equal" Unit: Each Qty: 1 FOB DESTINATION TO SEYMOUR JOHNSON AFB 27531 30 DAYS ADC. The following clauses and provisions apply to this acquisition: FAR 52.212-1 Instructions to Offerors-Commercial Items; The RFQ should be submitted and shall contain the following information: 1) RFQ number, 2) time specified for receipt of offers, 3) name, address, and telephone number of offeror, 4) terms of any express warranty, 5) price and any discount terms, 6) a completed copy of the representations and certifications at FAR 52.212-3 Alt 1 Offeror Representations and Certifications-Commercial Items (see FAR 52.212-3(j) for those representations and certifications that the offeror shall complete electronically); Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration, (IAW FAR 4.1201 prospective contractors must be registered in the Online Representative & Certification Application (ORCA) at http://orca.bpn.gov ) 7) Period for acceptance of offers - The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation, 8) Late offers - Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered. FAR 52.212-2 Evaluation-Commercial Items, award evaluation will be in accordance with FAR 13.106-2 and will be based on price. FAR 52.212-4 Contract Terms and Conditions-Commercial Items. FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, paragraphs (a)(1), (a)(2), (a)(3), (b)(12), (b)(27), (b)(28), (b)(29), (b)(31), (b)(38), (b)(42), (b)(48), FAR 52.204-99 System for Award Management Registration (DEVIATION), FAR 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards, FAR 52.211-6 Brand Name or Equal, FAR 52.219-1 Alt 1 Small Business Program Representations (Offerors must include a completed copy of this provision with their quote) FAR 52.225-13 Restrictions on Certain Foreign Purchases, FAR 52.225-25 Prohibition on Contracting with Entities Engaging in Sanctioned Activities Relating to Iran - Representation and Certification, FAR 52.247-34 F.O.B. - Destination, FAR 52.252-1 Solicitation Provisions Incorporated by Reference (located at http://farsite.hill.af.mil), FAR 52.252-2 Clauses Incorporated by Reference (located at http://farsite.hill.af.mil). FAR 52.252-6 Authorized Deviations in Clauses. The following are also applicable to this solicitation: DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials, DFARS 252.203-7002 Requirement to Inform Employees of Whistleblower Rights, DFARS 252.203-7005 Representation Relating to Compensation of Former DOD officials, DFARS 252.204-7003 Control of Government Personnel Work Product, DFARS 252.204-7008 Export Controlled Items, DFARS 252.209-7999 Representation by Corporations Regarding an unpaid Delinquent Tax Liability or a Felony conviction under any federal law (Deviation 2012-O0004), DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports, DFARS 252.246-7000 Material Inspection and Receiving Report, DFARS 252.247-7023 Transportation of Supplies by Sea. AFFARS 5352.201-9101 Ombudsman. Primary Point of Contact is A1C Devin Powner at (919) 722-1732 (devin.powner@us.af.mil) and Alternate is A1C Brett Etter at (919) 722-1577 (brett.etter@us.af.mil). Mailing address for quotes is 1600 Wright Brothers Ave, Seymour Johnson AFB, NC 27531. All quotes shall be received NLT 30 August 2013 at 1:30 P.M. EST. Facsimile quotes will also be accepted at (919) 722-5424. ALL OFFERORS MUST BE REGISTERED IN THE SYSTEM FOR AWARD MANAGEMENT (SAM) DATABASE PRIOR TO INVOICING IF AWARDED THIS CONTRACT. Information concerning SAM requirements can be accessed at http://www.sam.gov or by calling the Federal Service Desk at 1-866-606-8220. All responsible sources may submit a quotation, which, if timely received, shall be considered by this agency. This solicitation will be posted on the Federal Business Opportunities website only.