Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

High Voltage Transformer Installation and ESA Certification

Active

International

Response Deadline11/05/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the installation of high voltage electrical infrastructure for Correctional Service of Canada facility projects located in Gravenhurst, Ontario. The scope of work includes the removal of one pad-mounted and one pole-mounted transformer, the installation of new units, and the provision of temporary heating and power. The contractor is responsible for coordinating all outages and re-energization efforts with the local utilities and the agency to deliver fully commissioned, ESA-certified transformers. Qualified bidders must provide personnel with 309A electrical certifications and High Voltage Qualified Electrical Worker (TQE) status. The solicitation was posted on October 20, 2026, with a response deadline of November 5, 2026. This project falls under NAICS code 238210 and is managed through the Government of Canada.

General Info

High voltage electrical infrastructure installation and transformer replacement for CSC facility in Gravenhurst, Ontario.

Agency

Government of Canada → Correctional Service of Canada

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

Canada, Ontario (except NCR), Gravenhurst, CAN

Set-Aside

NONE

Documents

This scope was carved out of 21443-27-5482359.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PCB Transformer Replacements at Beaver Creek Institution -Minimum

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 07:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Correctional Service of Canada

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Correctional Service of Canada

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs high voltage electrical infrastructure for prime contractors on Correctional Service of Canada facility projects. Removes one pad-mounted and one pole-mounted transformer, installs new units, and coordinates outages and re-energization with CSC and local utilities. Provides temporary heating and power. Requires 309A electrical certifications and High Voltage Qualified Electrical Workers (TQE). Delivers commissioned, ESA-certified transformers.

Similar Contracts

Same NAICS industry code

Intent to Sole Source for Sail Racetrack Services to Swift Powder Coat Inc.

Solicitation # N3904027Q0008

Portsmouth Naval Shipyard Gf

POSTED

about 2 hours ago

DEADLINE

in about 22 hours

Overhead Electrical Distribution Line ContractorThis subcontract involves providing specialized installation, maintenance, and repair services for overhead electrical distribution systems at Oak Ridge National Laboratory. Working under prime contractors for the Department of Energy, the selected provider will be responsible for erecting poles, installing new lines, stringing and sagging conductors, and performing structural reinforcement and pole straightening. The scope of work requires the use of heavy equipment, specifically bucket trucks and digger derricks, to ensure the delivery of repaired infrastructure and comprehensive field documentation. All operations must be performed in strict accordance with industry safety and technical regulations, including NESC, NEC, NFPA 70E, and IEEE standards. The contract is categorized under NAICS code 238210 and is managed through ORNL UT-Battelle LLC.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 8 hours ago

DEADLINE

Electrical InstallationThis electrical installation subcontract, managed by Adams and Associates, Inc., involves performing specialized wiring and connections for US Department of Labor projects at the Glenmont Job Corps Center. The scope of work includes disconnecting power from legacy equipment and installing electrical controls and wiring for a new circulator pump and associated storage tanks to ensure the new mechanical system is fully powered and certified. Eligible bidders must hold valid New York State electrical licenses. This opportunity is set aside for various small business categories, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. The response deadline for this project is November 9, 2026.

Adams and Associates, Inc.

POSTED

about 8 hours ago

DEADLINE

Transformer Oil Testing Services

Solicitation # RFP-VC-26-010

The Inland Empire Utilities Agency (IEUA) is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformers. The scope of work is divided into three primary areas: conducting visual and infrared thermographic inspections on energized transformers under typical load, installing standardized external oil sampling devices to improve safety and access, and performing comprehensive oil testing analysis. Additionally, the contractor is responsible for evaluating nitrogen blanket systems to ensure positive pressure and providing on-site training for up to 20 agency staff members on inspection tools and defect identification. All work must adhere to strict industry standards, including ASNT Level 1 certification for thermography, ASTM D923 for oil sampling, and NFPA 70E safety protocols. The agency intends to make a single award to the most capable offeror based on a cost-effective and time-efficient proposal. Key evaluation criteria include a proven track record of at least two similar projects within the last five years, the proposed staffing plan, personnel availability, and the fee structure. Proposals must be submitted electronically via PlanetBids by December 23, 2026, and must include a detailed project approach, company profile, and required certifications such as a Non-Collusion Statement and Workers' Compensation Certificate. The resulting contract will utilize fixed pricing with a not-to-exceed total value and may include one-year extension options at the agency's discretion. Payment will be processed electronically via ACH within 30 days of invoice approval by the Project Manager.

Inland Empire Utilities Agency

POSTED

about 8 hours ago

DEADLINE

Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-2

Axia Electric LLC is soliciting bids from SBE/DBE certified firms for the Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility and Brine Ponds project in California for the Eastern Municipal Water District. The requested scopes of work include low voltage systems, fiber optics, and the supply of electrical materials. Interested subcontractors must submit their price quotes by 2:00 PM on November 18th, with a final bid deadline of November 19th, 2026. Bidders are encouraged to provide information regarding any lower-tier SBE/DBE participation to be considered during the evaluation process. Qualified bidders must be registered to perform public work pursuant to Labor Code Section 1725.5 and must adhere to the AGC Master Labor Agreements. Awardees will be bound by the prime contract terms and Axia's Standard Long Form Subcontract or Purchase Order. Minimum insurance requirements include 1 million dollars for Auto Liability and Workers Compensation, 5 million dollars for Excess Liability, and General Liability coverage of 1 million dollars per occurrence, 2 million dollars aggregate, and 2 million dollars for completed operations. Primary points of contact for the solicitation are Ryan Falk for estimating and Amy Roller for contract documents.

POSTED

about 8 hours ago

DEADLINE

2026-Nalo-Back-Up Generator Replacement

Solicitation # 2026-nalo-back-generator-replacement

Management and Training Corporation is seeking bids from qualified electrical contractors for a subcontracting opportunity to replace the back-up generator at the Hawaii Job Corps Center in Waimanalo. This project is categorized under NAICS code 238210 and is specifically set aside for various small business designations, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by the deadline of November 3, 2026. The primary point of contact for this solicitation is Karllene Allen, who can be reached via email or phone for further coordination regarding the performance of work in Hawaii.

2026-Nalo-Back-Up Generator Replacement

POSTED

about 8 hours ago

DEADLINE

Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services

Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services

Management and Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project involves a qualified electrical contractor inspecting, testing, repairing, and certifying emergency lighting systems to ensure compliance with NFPA 101 (2024 Edition) and NFPA 70 standards. Key deliverables include a full inventory of fixtures, functional testing via simulated power outages, the application of durable tracking labels to each fixture, integration of maintenance requirements into the facility's Computerized Maintenance Management System, and the provision of disposal certificates for hazardous materials. The estimated contract value ranges between $25,000 and $100,000. Bids are due by December 1, 2026, and must be submitted via email with a detailed cost breakout and the official MTC Bid for Lump Sum Contract form. A mandatory physical site visit is required prior to bid submission. For bids equal to or greater than $25,000, contractors must provide a bid bond guarantee of 20% of the base bid, as well as performance and payment bonds from a surety company with at least an A- rating. The award will be based on overall best value. This opportunity is set aside for small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. The contract is subject to the Davis-Bacon Act, Federal Contractor Minimum Wage requirements, and FAR standards regarding work hours, safety, and the Buy American Act.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 8 hours ago

DEADLINE

in about 1 month

ASO-1489-00 Installation of Distance Measuring Equipment (DME) on runway 15 at the Charleston International Airport in Charlston, SC

Solicitation # aso-1489-00-installation-distance-measuring-equipment-dme-runway-15-charleston-international-airport

POSTED

about 8 hours ago

DEADLINE

in about 1 month

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), involves a comprehensive construction project located in Louisiana. The scope of work encompasses a variety of facility improvements, including electrical work, grounding system repairs, roofing installation, plumbing replacements, grading, painting, and door repairs. The estimated magnitude of construction for these services is valued between 500,000 and 1,000,000 dollars. The opportunity is designated as an SBA set-aside, specifically open to Small Businesses, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their responses by the deadline of November 16, 2026. The project falls under NAICS code 238210, and inquiries can be directed to the primary point of contact, Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

about 8 hours ago

DEADLINE

ASO-0728-00 DME Shelter Installation in Shelby, NC

Solicitation # aso-0728-00-dme-shelter-installation-shelby-nc

Parsons Corporation is soliciting bids for the installation of a DME shelter in Shelby, North Carolina. The scope of work includes the installation of a shelter furnished by others, along with a DME antenna, associated foundations, junction box, meter rack, underground conduit, grounding, and conductors. This project falls under NAICS code 238210. The solicitation is open to various small business classifications, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of December 30, 2026. Primary coordination for this opportunity is handled by Quentin Wack.

Parsons Corporation

POSTED

about 8 hours ago

DEADLINE

Electrical Systems InstallationThis subcontract for Electrical Systems Installation involves providing electrical infrastructure and wiring for prime contractors on Texas Government elevator projects within Tom Green County. The scope of work includes the installation of fused disconnect switches, emergency power supplies, transfer switches, machine room illumination, building wire, armored cable, conduit, and smoke sensing devices. The contractor is responsible for delivering the completed electrical rough-in and all final connections. All work must be performed in strict compliance with NEC 2020 and the National Energy Conservation Code. This opportunity was posted on October 20, 2026, with a response deadline of December 9, 2026. The project falls under NAICS code 238210.

Tom Green County

POSTED

about 16 hours ago

DEADLINE

in about 2 months

LED Lighting and Specialized Control Systems InstallationThis subcontract opportunity involves the installation of energy-efficient LED fixtures and advanced control systems for Alexandria City Public Schools facility projects. The scope of work requires the replacement of existing lighting with X4 LED volumetric fixtures and the implementation of specialized circadian rhythm lighting controls, ensuring all installations adhere to NEC and NFPA standards to deliver a fully operational system. Eligible bidders must be Virginia licensed electrical contractors. The solicitation was posted on October 20, 2026, with a response deadline of November 23, 2026. Interested parties should note that a pre-bid meeting will be held on-site, and further details can be found through the provided vendor portal.

Alexandria City Public Schools

POSTED

about 16 hours ago

DEADLINE

in about 1 month

More opportunities from Government of Canada → Correctional Service of Canada

Same awarding agency

Electrical Site Restoration and Civil WorksThis subcontract for Electrical Site Restoration and Civil Works involves performing site restoration services for prime contractors at a Correctional Service of Canada facility located in Gravenhurst, Ontario. The primary scope of work focuses on restoring ground and pads following the removal of a 1975 pad-mounted transformer. The contractor is responsible for general site cleanup and ensuring all affected areas are returned to their original or better condition through the use of grading equipment and the application of concrete or gravel. The project falls under NAICS code 238990 and requires the delivery of a fully restored site area. Interested parties should note that the response deadline for this opportunity is November 5, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Supply of Pad-Mounted and Pole-Mounted TransformersThis subcontract involves the manufacture and delivery of one new pad-mounted transformer and one new pole-mounted transformer for the Correctional Service of Canada. The equipment must be delivered to the Beaver Creek Institution in Gravenhurst, Ontario, and must strictly adhere to all current Canadian electrical and safety standards as well as specific requirements set by the CSC and local utility providers. The project is managed under the Government of Canada and is designated for prime contractors overseeing facility projects. Interested parties should note the response deadline of November 5, 2026, for this procurement opportunity categorized under NAICS code 335311.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

PCB-Contaminated Equipment and Oil DisposalThis subcontract involves hazardous waste remediation for prime contractors working on Correctional Service of Canada facility projects in Gravenhurst, Ontario. The scope of work specifically requires the handling, transportation, and disposal of one pole-mounted transformer and one pad-mounted transformer containing 172 ppm PCB, along with all associated contaminated oil. The selected provider must hold all necessary federal and provincial hazardous waste permits and ensure strict compliance with the Canadian Environmental Protection Act and PCB Regulations. Upon completion of the services, the contractor is required to deliver official certificates of disposal and destruction.

Remediation Services

POSTED

DEADLINE

PCB Transformer Replacements at Beaver Creek Institution -Minimum

Solicitation # 21443-27-5482359

Correctional Service Canada requires the removal and replacement of two transformers at the Beaver Creek Institution (Minimum) in Gravenhurst, Ontario, to ensure compliance with the Canadian Environmental Protection Act and PCB Regulations. The project involves replacing one pad-mounted transformer with a PCB concentration of 172 ppm and one pole-mounted transformer that has reached the end of its service life. All work, including the supply and installation of new units, the regulated disposal of PCB-contaminated equipment and oil, electrical outage coordination, and site restoration, must be completed by December 31, 2026. The selected contractor must provide technicians with valid 309A electrical and high voltage Qualified Electrical Worker (TQE) certifications and obtain Electrical Safety Authority (ESA) sign-off. Due to the institutional setting, personnel will be escorted at all times, must adhere to strict search protocols, and may be required to provide tuberculosis testing results. The contractor is responsible for providing all necessary high voltage personal protective equipment and aerial work platforms. Evaluation is based on mandatory technical criteria and a history of past work-related projects, with a requirement for commercial general liability insurance covering completed operations for six years beyond the project's completion.

POSTED

DEADLINE

Salt and Sand SupplyThis subcontract involves the supply and delivery of bulk road salt and sand for prime contractors working on Correctional Service Canada facility projects in St. John's, Newfoundland and Labrador. The selected provider is responsible for hauling industry-standard de-icing materials to designated sites or staging areas using dump trucks. Due to the nature of the location, all drivers must strictly adhere to institutional security and escort protocols when making deliveries directly to the CSC site. This opportunity is managed under the Government of Canada and is categorized under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Snow Clearing and Ice Control ServicesThis subcontract for Snow Clearing and Ice Control Services involves providing comprehensive winter maintenance for prime contractors at the St. John’s Community Correctional Center under the Correctional Service of Canada. The scope of work includes clearing snow from parking lots and associated areas using plows and blowers, as well as implementing sanding and salting measures to ensure a safe, ice-free environment. The service provider must maintain 24/7 availability and strictly adhere to all institutional security protocols and scent-free requirements mandated by the facility. This project is located in Newfoundland and Labrador, with a response deadline set for October 30, 2026.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

Snow Removal Services – St. John’s CCC

Solicitation # 21201-27-5544622

The Correctional Service of Canada is soliciting bids for comprehensive snow clearing, removal, sanding, salting, and ice control services at the St. John’s Community Correctional Center located at 86 Charter Avenue, St. John’s, Newfoundland and Labrador. The contract begins on December 1, 2026, and runs through April 30, 2027, with the option for four additional one-year renewals. The selected contractor must provide all necessary labor, equipment, and materials, maintaining a 24/7 contact number and commencing work within two hours of notification. Key operational requirements include clearing parking areas before 0600 hours and initiating snow removal once accumulation reaches six centimeters. All equipment must be equipped with backup alarms and rotating amber warning lights. This procurement is open to Canadian suppliers and applicable trading partners, with a conditional set-aside for Indigenous businesses under the Procurement Strategy for Indigenous Business if two or more responsive bids are received. The contract will be awarded to the lowest priced compliant bid that meets all mandatory technical criteria and experience requirements. Contractors must maintain Commercial General Liability Insurance of at least 2,000,000 dollars and adhere to strict institutional security protocols, including being escorted by staff at all times and completing tuberculosis testing. Invoicing must be submitted electronically and follow specific professional formatting requirements to be eligible for payment via direct deposit or MasterCard purchase card.

Landscaping Services

POSTED

DEADLINE

Psychological Risk Assessment Services (Psychologist) – Ontario Region

Solicitation # 21120-26-5297472

The Correctional Service of Canada is seeking professional psychological risk assessment services for the Ontario Region to support offender case management and evidence-based decision-making. The contract covers multiple locations, including the Joyceville, Collins Bay, Bath, and Grand Valley Complexes, as well as Millhaven, Warkworth, and Beavercreek Institutions and the Regional Treatment Centre. The selected contractor will perform structured and unstructured risk assessments, provide professional opinions, and participate in case conferences and investigative processes. All services must be delivered in English and comply with the Canadian Code of Ethics for Psychologists, CSC policies, and the National Essential Health Services Framework, with a specific requirement to be responsive to the needs of women and Indigenous People. The contract period runs from January 16, 2027, to January 15, 2030. Award is based on the lowest priced compliant bid among responsive bidders who meet all mandatory technical criteria and insurance requirements, including a minimum of 2 million dollars in Commercial General Liability coverage. Security is a critical component, requiring the contractor to maintain a valid Designated Organization Screening and for personnel to hold Reliability Status. The scope includes an estimated 120 risk assessments over three years, with payments made monthly via direct deposit or MasterCard Acquisition Card. Bidders must be Canadian suppliers, and the procurement is not subject to trade agreements or Indigenous set-asides.

Offices of Mental Health Practitioners (except Physicians)

POSTED

DEADLINE

Confined Space Vocational Training ProviderThis subcontract involves providing Energy Safety Canada Certified Confined Space training for prime contractors working on Correctional Service of Canada facility projects located in Alberta. The selected provider must deliver a minimum of six hours of combined classroom and practical instruction for groups of up to 15 participants, ensuring that all attendees receive official Energy Safety Canada certification upon completion. The provider is responsible for supplying all necessary curriculum, training manuals, and personal protective equipment. To qualify, the provider must hold Energy Safety Canada certification, and instructors are required to have a proven track record of delivering at least six courses within the last three years.

Other Technical and Trade Schools

POSTED

DEADLINE

H2S Alive Vocational Training ProviderThis subcontract involves providing Energy Safety Canada Certified H2S Alive vocational training for prime contractors working on Correctional Service of Canada facility projects located in Alberta. The selected provider must deliver a minimum of six hours of classroom and practical instruction for groups of up to 15 participants, ensuring all students receive official Energy Safety Canada certification upon completion. The provider is responsible for supplying all necessary curriculum, manuals, and personal protective equipment. To qualify, the provider must hold Energy Safety Canada certification, and instructors are required to have delivered at least six courses within the last three years. This opportunity was posted by the Government of Canada on October 15, 2026, with a response deadline of November 5, 2026.

Other Technical and Trade Schools

POSTED

DEADLINE

Safety Vocational Training - H2S Alive and Confined Space

Solicitation # 21C50-27- 5406568

The Correctional Service of Canada requires a contractor to provide Energy Safety Canada Certified vocational training in H2S Alive and Confined Space for offenders at various institutions in Alberta. The objective is to facilitate community reintegration by providing industry-recognized certifications. The work is divided into three streams: Alberta South, Alberta Central, and Grande Cache, covering facilities ranging from minimum to maximum security. The contract runs from the date of award until January 31, 2028, with an option for two additional one-year renewals. The selected contractor must provide certified instructors who have each delivered at least six courses in the respective subject area within the last three years. Deliverables include all training materials, personal protective equipment, and certificates for successful participants. Each course must be at least six hours long with a maximum of 15 participants. The contractor is responsible for providing a comprehensive tool list two weeks before training begins and must maintain commercial general liability insurance of at least 2 million dollars. This procurement is open only to Canadian suppliers and is conditionally set-aside under the Procurement Strategy for Indigenous Business if two or more responsive bids are received from Indigenous businesses. Award is based on the lowest priced compliant bid per stream. Bidders must hold a valid organization security clearance and ensure all proposed personnel meet the necessary security requirements for the correctional facilities.

Other Technical and Trade Schools

POSTED

DEADLINE

Site Restoration ServicesThis subcontract for Site Restoration Services involves restoring disturbed areas for prime contractors at Correctional Service of Canada facilities located in Kingston. The scope of work focuses on the grading and sodding of areas adjacent to new sidewalk construction, utilizing hand tools and sod cutters to deliver a fully restored landscape. Due to the nature of the facility, all personnel assigned to the project must successfully complete security screenings and tuberculosis testing. The opportunity was posted on October 14, 2026, with a response deadline of November 10, 2026.

Landscaping Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS