Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Highline Trolley Precision Machining and Finishing

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This HUBZone set-aside subcontract involves precision machining and final assembly for prime contractors supporting DLA Troop Support supply contracts. The selected provider will machine cast blanks to final dimensions according to TDP Rev A Gen 2 and Drawing NR 81898 805-2555040, perform the final assembly of tackle block components, and apply all required finishes to deliver eight completed and inspected Highline Trolleys. Performance will take place in San Diego, California, under NAICS code 332710. The contractor must maintain a CMMC Level 2 self-assessment and ensure strict adherence to MIL-STD-2073-1E and MIL-STD-129 standards. Responses for this Department of Defense requirement are due by November 9, 2026.

General Info

HUBZone subcontract for machining and assembling eight Highline Trolleys in San Diego, California.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

NAICS

332710 - Machine Shops

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

HZC

Documents

This scope was carved out of SPE8EE-27-T-0271.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TROLLEY, HIGHLINE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs precision machining and final assembly for prime contractors on DLA Troop Support supply contracts. Machines cast blanks to final dimensions per TDP Rev A Gen 2 and Drawing NR 81898 805-2555040. Executes final assembly of tackle block components and applies finishes. Requires CMMC Level 2 self-assessment and adherence to MIL-STD-2073-1E and MIL-STD-129. Delivers 8 completed, inspected Highline Trolleys.

Similar Contracts

Same NAICS industry code

Supply of Metal Tube Assemblies (NSN 4710016532686)This subcontract with the DLA Weapons Support Fluid Handling Division involves the manufacture or procurement of eight metal tube assemblies under NSN 4710016532686. The contractor is responsible for utilizing metal fabrication and quality assurance testing equipment to deliver the completed units to Tinker AFB. Strict adherence to quality and documentation standards is required, specifically performing sampling and inspection according to MIL-STD-1916 or ASQ H1331 Table 1. Additionally, the provider must ensure all supply chain traceability documentation meets the requirements established in August 2016.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Sleeve Bushings (NSN 5365-01-622-5565)This subcontract involves the precision CNC machining of 12 sleeve bushings under NSN 5365-01-622-5565 for the Department of Defense, specifically the DLA Weapons Support ASC. The selected manufacturer must execute a First Article Test within 90 days and ensure all deliverables comply with MIL-STD-129 and MIL-STD-2073-1E standards. Final delivery of the finished units is required at the DLA Distribution Depot in Hill, Utah. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification, be part of the US/Canada Joint Certification Program, and maintain CMMC Level 2 compliance. The project falls under NAICS code 332710, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Precision Machining/Fabrication of Vehicular Component BracketThis subcontract involves the precision machining and fabrication of one Vehicular Component Bracket, identified by NSN 2590-01-674-1574, for the DLA Weapons Support Land Supply Chain. The selected provider must utilize CNC milling or turning to manufacture the bracket according to the specific dimensions and tolerances outlined in the RA001 technical requirements. To be eligible, contractors must hold ISO 9001:2015, CMMC Level 2, and US/Canada Joint Certification Program certifications. The project falls under NAICS code 332710 and requires the delivery of one finished component. Responses are due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Precision Machining and Fabrication of Ground Adapter FittingsThis subcontract involves the precision machining and fabrication of 14 Ground Adapter Fittings, identified by NSN 1730-01-290-3964, for prime contractors supporting DLA Troop Support procurement projects. All work must be performed according to the provided technical data package, with a strict prohibition against the use of additive manufacturing. The project is managed under the Department of Defense and falls under NAICS code 332710, with performance located in New Cumberland. To ensure the security of export-controlled technical data, the contractor must maintain CMMC Level 2 certification and full ITAR and EAR compliance. All finished fittings must meet rigorous DLA technical specifications. Interested parties must respond by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Brake Disc (NSN 2530-01-713-9297)This subcontract involves the manufacture of one high-precision brake disc, identified by NSN 2530-01-713-9297 and Part Number 627-8476-003, for the DLA Weapons Support Land Supply Chain. The project requires precision machining and grinding performed to Oshkosh Aerotech specifications using high-tolerance CNC machining centers. To qualify, the provider must obtain engineering source approval from the Government Design Control Activity. The contract is categorized under NAICS code 332710 and mandates strict adherence to NIST SP 800-171 and DFARS 252.204-7012 cybersecurity and data protection standards. Performance will take place in Santa Rita, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Manufacture and Supply of Shaft Sleeves (NSN 3950-01-137-0937)This subcontract involves the manufacture and supply of 32 precision-machined shaft sleeves, identified by NSN 3950-01-137-0937, for Garner-Denver hoist models. The components are produced for prime contractors supporting DLA Troop Support contracts under NAICS code 332710. Performance will take place in New Cumberland, Pennsylvania, with the final delivery of all units handled as FOB Origin. The contractor must adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129. Additionally, the agreement requires full compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regulations to ensure all legal and security requirements for Department of Defense procurement are met.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 9 hours ago

DEADLINE

Precision Component Manufacturer for Jack KitsThis subcontract involves the precision manufacture of individual components, including seals, valves, pins, and housings, specifically for NSN 1730-01-206-1707. The selected manufacturer will utilize CNC machining, casting, or molding to produce parts that adhere to Critical Application Item standards and Columbus Jack Corp P/N 1589 technical data. All finished components must be delivered to a prime integrator along with required certificates of conformance to support DLA Troop Support supply contracts. Managed under NAICS code 332710 for the Department of Defense, the work is to be performed in New Cumberland. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 9 hours ago

DEADLINE

Specialized Component Supply for Retractor AssemblyThis subcontract involves the supply of precision machined components, springs, or fasteners for prime contractors supporting Department of Defense DLA supply contracts. The scope of work specifically requires the manufacture of individual piece numbers for part number 556AS164-3, adhering to the specifications outlined in TDP Rev A Gen 1. Deliverables include either individual machined parts or complete hardware kits, with a strict requirement for material certifications and mill test reports for all metals used. The contract is managed under NAICS code 332710 and mandates full compliance with the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 9, 2026, for this specialized component supply effort related to retractor assemblies.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 9 hours ago

DEADLINE

Fabrication of Metal Tube Assembly (NSN 4710-01-651-8603)This subcontract involves the fabrication and supply of one custom metal tube assembly, identified by NSN 4710-01-651-8603 and part number LS1121349, for the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The scope of work requires precision machining, bending, and welding of metal tubing, necessitating the use of CNC tube benders and TIG/MIG welding equipment. Performance will take place in Ft Carson, Colorado. The contractor must strictly adhere to the Berry Amendment and the DLA Master List of Technical and Quality Requirements RA001. This opportunity falls under NAICS code 332710 and was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

Precision Fabrication of Wing Fold Jury GageThis subcontract involves the precision machining and fabrication of a Wing Fold Jury Gage, specifically designed to meet Northrop Grumman part number 123GT10191 specifications. The project requires the use of CNC milling, turning, and CMM measurement to ensure proper calibration and certification. The final deliverable is one calibrated gage that adheres to all DLA Technical and Quality Requirements. The work is being performed for the Department of Defense via the DLA Receiving Officer at Naval Base Coronado in San Diego. To be eligible, the contractor must hold ISO 9001 or AS9100 certification. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, falling under NAICS code 332710.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

about 9 hours ago

DEADLINE

Manufacturing and Supply of Mounting Brackets (NSN 5340-01-723-0174)This subcontract involves the manufacturing and supply of 13 mounting brackets under NSN 5340-01-723-0174 for the DLA Weapons Support Nuclear Reactor Program. The selected provider must fabricate the components according to specific technical data and ensure full compliance with RA001 quality requirements, as well as sourcing mandates established by the Buy American Act and the Berry Amendment. Finished products must be marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. Due to the sensitive nature of the program, the contractor is required to maintain CMMC Level 2 certification and hold valid ITAR and EAR authorizations. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 332710. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 9 hours ago

DEADLINE

Precision Adapter Component FabricationThis subcontract involves the precision fabrication of individual hardware components for the Parts Kit, Adapter (NSN 1560-00-706-7558), supporting prime contractors under the DLA Weapons Support ASC. The manufacturer is required to utilize precision machining to produce parts according to specific technical data, ensuring strict adherence to Critical Application Item standards and RQ017 physical identification marking requirements. The scope of work explicitly prohibits the use of additive manufacturing. All delivered bare adapter components must meet zero-based sampling quality thresholds to ensure total compliance. This effort is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

Supply of Vehicle Cargo Tie-Downs (NSN 3990016198011)This subcontract involves the supply of 109 vehicle cargo tie-downs for prime contractors working on Department of Defense projects through DLA Troop Support. The contractor is responsible for manufacturing or sourcing units that strictly adhere to NSN 3990016198011 and the DLA Master List of Technical and Quality Requirements. All materials must be compliant with the Berry Amendment and the Buy American Act. Operational requirements include specific packaging and marking standards per MIL-STD-129 and ASTM D3951, with palletization following RP001 guidelines. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 339999. Responses for this requirement are due by November 9, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supplier of Fibrous Nylon RopeThis subcontract involves the manufacture and supply of 7,000 reels of natural-colored fibrous nylon rope, identified by NSN 4020001069406, for prime contractors supporting Department of Defense supply contracts. The rope must feature a 3-3/4 inch circumference and be provided in 200-yard reels with a net weight of 239 pounds and a nominal continuous length of 600 feet. All products must strictly adhere to MIL-STD-129 and MIL-STD-2073-1E standards for marking and packaging. The project is managed under NAICS code 314994 and will be performed in San Diego, California. Interested parties must respond by November 9, 2026, following the solicitation posted on October 28, 2026.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 9 hours ago

DEADLINE

Supply of Hydraulic Tripod Jacks (NSN 1730-00-201-4849)This subcontract involves the sourcing or fabrication and delivery of Hydraulic Tripod Jacks meeting NSN 1730-00-201-4849 specifications for prime contractors supporting Department of Defense supply contracts. The selected provider must ensure all hardware adheres to the DLA Master List of Technical and Quality Requirements, with packaging and marking strictly following ASTM D3951 and MIL-STD-129 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333998. Interested parties must submit their responses by November 6, 2026, for performance located in zip code 17070-5002.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supplier of Paving Breaker Spades (NSN 3820-01-242-1210)This subcontract involves the supply of 15 Paving Breaker Spades to support prime contractors fulfilling DLA Troop Support supply contracts. The required hardware must meet NSN 3820-01-242-1210 specifications, specifically identifying Stanley Black & Decker part number 09262 or Daimler Truck North America LLC part number 09262M. All units must adhere to Critical Application Item quality standards and comply with DLA supply chain requirements. Managed under the Department of Defense by Construction & Equipment Manu & Con, the contract falls under NAICS code 423830. The place of performance is located in Tracy, California. Interested parties must respond by the deadline of November 9, 2026, following the posting date of October 28, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

Military-Grade Packaging and Logistics ServicesThis subcontract for Military-Grade Packaging and Logistics Services involves providing specialized packaging and palletization for prime contractors supporting DLA Troop Support aerospace hardware projects. The scope of work requires packaging items according to ASTM D3951 standards, marking and labeling in compliance with MIL-STD-129, and palletizing shipments per RP001 guidelines. The final deliverable consists of 14 units prepared for transport to DLA Distribution. Managed under the Department of Defense and categorized under NAICS code 488510, the work will be performed in New Cumberland. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

Supplier of Jack Parts Kits (NSN 1730-01-206-1707)This subcontract involves the procurement and manufacture of complete Jack Parts Kits for prime contractors supporting DLA Troop Support supply contracts. The supplier is responsible for providing components for NSN 1730-01-206-1707, ensuring full compatibility with Columbus Jack Corporation P/N 1589. The scope of work includes the kitting, assembly, and packaging of two completed kits in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract is issued by the Department of Defense under NAICS code 332999, with performance taking place in New Cumberland. Compliance with the Buy American Act and DFARS 252.204-7012 is mandatory. Interested parties must submit their responses by November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Logistics ServicesThis subcontract for MIL-SPEC Packaging and Logistics Services involves providing specialized military packaging, marking, and palletization for prime contractors supporting Department of Defense supply contracts. The scope of work requires strict adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. The primary objective is the preparation and delivery of 119 packaged and palletized units to the DLA Distribution DDSP New Cumberland Facility for final destination acceptance. The project is categorized under NAICS code 561910 and is managed through the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Precision Manufacturing of Retractor AssembliesThis subcontract involves the precision manufacturing and assembly of 119 Retractor Assemblies and Weapon Cradle Adapters for prime contractors under Department of Defense DLA supply contracts. The work requires strict adherence to Basic Drawing NR 30003 556AS164 Revision H and TDP Rev A Gen 1, utilizing precision CNC machining and specialized assembly jigs. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the contractor must be an OEM-approved source or successfully obtain OEM approval. Additionally, the provider must maintain rigorous cybersecurity standards, ensuring full compliance with CMMC Level 2 and NIST SP 800-171. Responses for this requirement are due by November 9, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manufacturing and Supply of Sleeve Spacers (NSN 5365-01-217-0858)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Spider, Switch Housings

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 9 hours ago

DEADLINE

Supply of TEE, BOSS (NSN 4730009290596)

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 9 hours ago

DEADLINE

Precision Machining of Fuel Drain Adapters

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 9 hours ago

DEADLINE

Towbar Catch Assembly Manufacturing

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 9 hours ago

DEADLINE

Mounting Bracket Supplier (NSN 5340-01-680-6492)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Manufacturer of Timing Pin Adapter (NSN 5340015330779)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Welding Torch Collets

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 9 hours ago

DEADLINE

Precision Machining/Fabrication of Aircraft Intercostals

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Precision Machining and Fabrication of Nose Tow Catapult Pins

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Fuel Cap Parts Kit Manufacturer

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Trigger Extension Fabrication (Critical Gun Part)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS